When I connect usb with OTG cable, i can transfer files for 5min top, and then suddenly usb disconnects,get security warning Tablet lock in status bar, and i have to restart phone to get the otg working again..
I am on TD 6 and I am using this kernel if that helps..http://forum.xda-developers.com/showthread.php?t=2188955
Please if someone knows how to fix this, help
Related
Hello Gents,
I purchased a USB OTG for my 7+ last week, all was working. the USB drives works, mouse works.
But this morning, when I tried to use the same mouse/usb drives. The tab does not seem to recognized the USB, I can see the LED on the USB blinks for a few moment and then turn off. Like it's getting power but then stop.
I tried the following.
1. reboot the tab. power on , power off. No go.
2. reboot from factory default ( yes it drives me nuts, but I did it anyway) Power Volume Up. Factory reset, data wipe. No go.
3. tried a new OTG USB cable, still does not work.
I had the Tab root before, but after the system reset, it gone back to stock firmware. The only thing I can think of is I did the latest Samsung Patch after my initial test.
When I look at the "dmesg"
s5p-ehci: detected XactErr len 0/8 retry
tspdrv: ImmVibeSPI_ForceOut_AmpEnable (1)
ImmVibeSPI_ForceOut_AMpDisable...
Does anyone have solution for this problem?
Thank
P.S. these are not the OEM Samsung USB cable. But they were working before.
Also, when I plug in an portable external HDD, it does say, High power device not supported.
hi,,,
try to connect all tools to usb otg hub first before you conect it to GTab. i mean if you want to connect a flash disk or a mouse, connect them to the usb otg hub first before connect it to GTab.
for hdd, you have to connect a power supply to usb otg to make it readable on GTab. i use my old nokia charger to power the usb otg hub device.
hope it help and sorry for my bad english.
dan
edit : i use this device as usb otg hub
http://db.tt/fmw1MhTY
I have the same error.
I have the same error but when I reboot my Tab, it's ok, before reboot I do not disconnect USB from my tab!You can try!
Ok
So I've had my Galaxy tab OTG for about a month now and was great until just a little while ago.
It always worked before but now anything connected to it doesn't work.
When I plug the otg in my device it recognizes that the otg is connected but the usb devices connected to it don't work at all.
For example, I connect a mouse to it and the pointer doesn't come up as well as the mouse light isn't even on.
Please help me, I really need a solution I use this otg for usb for school and also to connect xbox controllers.
Thanks if u can help
Sometimes i have the same problem, first clean your OTG with alcohol and toothbrush and your note 10.1 port when it is turned off.
If the problem persist just take it easy and just take out your OTG and reconnect it, try not to connect the OTG with a device attach to it, detach any devices of the OTG and then the OTG from the tablet, wait a few seconds and connect the OTG again and then wait a few seconds more until the Note recognize the OTG and connect the device to the OTG.
Its get a little tricky sometimes just be patient.
Hello first sorry for my bad english, second i just got an older Asus Z380KL (runing Android 6.0.1 latest update from Asus) and its working fine for the most part. I just cant connect it to my PC (Windows 7/10) using USB. When i plug it in to my PC in device manager i dont see any new device but the Tablet is charging.
The tablet is in charging mode and i cant switch it to MTP. In Setting>Storage there is no option to change the USB mode, i dont get any notification in the pull down bar, in Developer menu i enabled USB debuging and tested the option to switch the USB configuration but if i change to MTP,PTP or RNDIS it always says Charging. I know the USB connector on the tablet is OK just tested my OTG cable and connected a mouse and it was working. Also i used 5 diferent USB cables that work when i try whit my Phone. Also tested all my USB2 and USB3 ports on my PC and laptop.
If anyone can help i wold be very grateful
Edit: Just tried it on Ubuntu 16.04 Live and MTP is working fine, Tablet connects i get the popup in the status bat saying i can pick if i want charging, MTP or PTP but on Windows 7/10 i cant get it to work its always in charging mode and i cant change it.
"USB Device Connected
The phone's battery is being used to power the connected USB device. To save battery, please disconnect the USB device when not in use."
This notification keeps popping up whenever I connect a USB Flash drive or anything to the micro usb port. This happens even when the battery is 100%
My phone supports OTG and the drive works but its really frustrating because that notification keeps popping up.
When I click ok it goes away, but pops back after few seconds.
How can I stop this notification from popping up every few seconds ?
Please help
Device - HTC Desire 10 Pro
Android - 6.0
Hi @FireStorm919
Same device same problem.
Specially annoying watching movies trough Lenovo USB-C HUB C112 HDMI HUB...
Have you found a fix ?
Regards
JBo
FireStorm919 said:
"USB Device Connected
The phone's battery is being used to power the connected USB device. To save battery, please disconnect the USB device when not in use."
This notification keeps popping up whenever I connect a USB Flash drive or anything to the micro usb port. This happens even when the battery is 100%
My phone supports OTG and the drive works but its really frustrating because that notification keeps popping up.
When I click ok it goes away, but pops back after few seconds.
How can I stop this notification from popping up every few seconds ?
Please help
Device - HTC Desire 10 Pro
Android - 6.0
Click to expand...
Click to collapse
jbocreative said:
Hi @FireStorm919
Same device same problem.
Specially annoying watching movies trough Lenovo USB-C HUB C112 HDMI HUB...
Have you found a fix ?
Regards
JBo
Click to expand...
Click to collapse
That sounds like something in your battery/battery saver options is telling you to remove it.
Sent from my LGL84VL using Tapatalk
I was buy android phone 9 days ago.
First case, my battery indicator stuck on 50%, after use or charge only stuck on 50%.
Second case, when i connect my phone to pc, nothing happen, only charging indicator.. Nothing popup mtp or storage device option or something.. I have enable usb debugging on developer option.
And another testing, I try connect my usb OTG type-C, but my phone cant detect my otg..
What should i do to fix this issue? This is bugs on my ROM or from my usb type-C phone connector broken?
pls help me :''/
Sorry i can't added picture, beause my phone totally can't use after all experiment and wipe all data..
Stuck with TWRP and "No OS installed".
Btw, I can't insert ROM files to my device, because my phone cant recognize my pc or transfer data via usb..
feels life on flintstones century, disconnect communication from all my friend more than 3 days :'(