Hey everyone first this is a great place full of info, I just get and Trio stealth pro 7 by mach speed technology, I rooted it, I intalled CWM without problems, I also flash CM9 without any problem, but I change CPU values, to min=900MHz max=1200MHz something like that and after that a turn off the tablet then when I turn on again it just freeze in lock screen after boot. and I can't go to recovery mode with hardware bottons, Sorry for my english I'm from Venezuela. thanks any help.
Joshdmo said:
Hey everyone first this is a great place full of info, I just get and Trio stealth pro 7 by mach speed technology, I rooted it, I intalled CWM without problems, I also flash CM9 without any problem, but I change CPU values, to min=900MHz max=1200MHz something like that and after that a turn off the tablet then when I turn on again it just freeze in lock screen after boot. and I can't go to recovery mode with hardware bottons, Sorry for my english I'm from Venezuela. thanks any help.
Click to expand...
Click to collapse
You can get into recovery via ADB, Download the USB drivers for your device and then get the Android SDK tools, you can read up how to do that, then get into your platform tools folder, get a cmd prompt going, turn it on, and type "adb reboot recovery" as fast as you can before it freezes.
orangekid said:
You can get into recovery via ADB, Download the USB drivers for your device and then get the Android SDK tools, you can read up how to do that, then get into your platform tools folder, get a cmd prompt going, turn it on, and type "adb reboot recovery" as fast as you can before it freezes.
Click to expand...
Click to collapse
Thanks man, I now downloading the android SDK tools, but i can't find the usb driver, but i think my pc already has it installed because I rooted my tablet from here with unlockroot, anyways I will get it a shout and I let you now if i need some help, thenks for the answer so fast.
Joshdmo said:
Thanks man, I now downloading the android SDK tools, but i can't find the usb driver, but i think my pc already has it installed because I rooted my tablet from here with unlockroot, anyways I will get it a shout and I let you now if i need some help, thenks for the answer so fast.
Click to expand...
Click to collapse
yeah bro, let us know if it worked
Ok bro i did install the sdk and the plataformtools how i open the adb sorry i'm kind of noob in this sdk stuff
Sent from my LG-P500 using xda app-developers app
Ey man thanks for the help, I install recovery from ADB shell but for some reason every time i reboot my tablet the recovery is gone, so i restore stock rom but the touch is nota working and now i can't connect to adb because debugging mode is off in the tablet, any ideas? Please bro and thanks for the help
Sent from my LG-P500 using xda app-developers app
Hello. I have the same problem but where do you get the stock firmware?
Sent from my Xperia Mini Pro using xda app-developers app
Stealth Pro
siuishere said:
Hello. I have the same problem but where do you get the stock firmware?
Sent from my Xperia Mini Pro using xda app-developers app
Click to expand...
Click to collapse
Don't know if you're still having the same problem but if so, you're in luck. I have the same tablet, what I did to restore mine was to download livesuit to flash a recovery image onto your device. Of course everything will be deleted but once you're back into your tablet you can put all your apps back on &/or your custom rom. I was able to get CM10 onto mine running very smoothly so I recommend iit.
Anyway, use the recovery image for the ly-f1 tablet. It's exactly like the stealth pro trio tablet so you can use the same things. Just google "ly-f1 recovery image" download a good one and open it up in livesuit. After that you're gonna wanna put your tablet into download mode.To do that you wanna make sure the tablet is off. Plug your usb in. Press and hold the volume down button on your tablet while pressing the power button about 10 times or at least until you hear your computer respond. Livesuit will guide you there rest of the way. It's really simple.
GOOD LUCK.
YannaMariex said:
Don't know if you're still having the same problem but if so, you're in luck. I have the same tablet, what I did to restore mine was to download livesuit to flash a recovery image onto your device. Of course everything will be deleted but once you're back into your tablet you can put all your apps back on &/or your custom rom. I was able to get CM10 onto mine running very smoothly so I recommend iit.
Anyway, use the recovery image for the ly-f1 tablet. It's exactly like the stealth pro trio tablet so you can use the same things. Just google "ly-f1 recovery image" download a good one and open it up in livesuit. After that you're gonna wanna put your tablet into download mode.To do that you wanna make sure the tablet is off. Plug your usb in. Press and hold the volume down button on your tablet while pressing the power button about 10 times or at least until you hear your computer respond. Livesuit will guide you there rest of the way. It's really simple.
GOOD LUCK.
Click to expand...
Click to collapse
Can you tell me where would I find the Image files. I tried to using the livesuite i keep getting invalid img file with files that i have
trio7-a10-bma250-stockimg
and
trio7-a10-mxc622x-stockimg
Joshdmo said:
Hey everyone first this is a great place full of info, I just get and Trio stealth pro 7 by mach speed technology, I rooted it, I intalled CWM without problems, I also flash CM9 without any problem, but I change CPU values, to min=900MHz max=1200MHz something like that and after that a turn off the tablet then when I turn on again it just freeze in lock screen after boot. and I can't go to recovery mode with hardware bottons, Sorry for my english I'm from Venezuela. thanks any help.
Click to expand...
Click to collapse
Hi, I'm kinda of a noob at this stuff, but I've learned quite a bit recently from just reading around, so bear with me if I don't understand or need more specific instructions. I have the trio stealth pro 7 and it is always stuck on the boot screen with the android logo when I boot. I was attempting to flash cm9 on the tablet but after I wiped the tablet initially, i couldnt find the cm9 rom on my internal memory while in recovery mode, so I ended up turning off my tablet, which now doesn't boot up anymore (stuck with android logo). I found a fix where you can use livesuite and adb to fix this issue; however, after installing adb, my tablet is not being detected, (my phone does). My tablet is not being recognized by windows in general, and it doesn't show up under device manager. There was one part of the step where I need to install usb drivers for the tablet; however, I cant find any online. I have used the tablet before with my computer before the attempt to flash cm9, so I am guessing drivers should already be installed. I feel I can get this issue fixed if I can just get adb to recognize my tablet. Perhaps this fix is not the one I need and maybe there's a simpler fix. I'm just too dumb to have realized it. Another note to add is, pressing the combination of power and volume buttons does nothing. Please help!!! thank you!!
stock images download
Hi guys ... Trio tablet Is similar or the same as Ly-F1 tablets :cyclops: these stock images will work and can be downloaded from link bekow.. make sure you download live suite first, applicable drivers (adb/fastboot) and you should be good . Follow directions accordingly and as reminder ,, :highfive: ,,, flashing / adb / sdk should only be used by advanced users who are comfortable using the SDK ADB flash tools.. . I am in no way responsible for bricked devices... Happy Flashing. :cyclops:
http://lyxfsz.com/en/downs.htm?sortid=0_22 Downloads LINK
Hello everyone, I bought a brand new IPPO Q78 (Android 4.0.4) via focalprice.com 2 month ago. First day of using it, and by using I mean simply installing a few apps, and after reboot, I got BOOT LOOP problem, so it wasn't able to get to tablets home screen. After lot of reading about similar problems, I was able to successfully unbrick it using (I suggest others with same cheap china tablet that are also soft bricked to use this program, it really was the only one which helped me):
http://forum.gsmhosting.com/vbb/f781/android-tablet-wifi-cpu-a10-a13-wipe-rom-easy-zakir-gsm-1656461
Here is my situation now, you can view it:
http://www.youtube.com/watch?v=cU1KYIrvZWI
Before, when it was soft bricked, at least after this android logo came the android animation that looped forever, but my computer was able to recognize and install the drivers for Android ADB device, now it can't, it won't recognize my tablet no matter what, ONLY when I press volume up and connect it to usb port, then it recognizes and installs vid_1f3a_pid_efe8 driver, which also I cannot use with LiveSuite, why? I really don't know, I've tried every possible solution found on forums (mainly here, but elsewhere also).
Whole this situation is a result of me doing the CWM upgrade/install, I'm a newbie, so I cannot tell for sure what was it, I just know it was from xda--developers forum, more accurately this thread:
http://forum.xda-developers.com/showthread.php?t=2189640
after this, poof. I think it is hard bricked, and my question is, is there a way to flash it (btw, tablet is rooted) by only having access through mentioned driver vid_1f3a_pid_efe8 and without LiveSuit, cause I would have to download and try a 100 ROM's before I pin the one that suits my tablet. It's really a tough program to deal with, but if it's the only one, I would gladly format and reinstall my Windows OS as many times I need to to get it working.
hello,
I hope someone can help me with my AT&T LG Optimus Pro G phone, which I have royally screwed up.
I was experimenting with the cyogen mod and after installation I installed the freegee app and once the cwm recovery was installed, I decided to go into the recovery by holding down up volume and power button.
Once I was in recovery for CWM i couldn't exit out, and the phone constantly booted into recovery after every reboot, even if i took out the battery, and powered it on.
I tried reflashing the cynogen mod through the sd card, and even though I would get success message the phone would still reboot into the cwm recovery.
I started doing research on the internet and i found file exitrecovery.zip that could be used to possibly get the phone out of the cwm recovery.
After installing exitrecovery.zip, I rebooted the phone, and now I have complete black screen. There are no light, no hints the phone is even turning on, and I can't get into recovery( or at least I can't tell). The only thing now is that when i connect the phone to the computer the window tries to install drivers for the device, and eventually prompts to insert a CD for LG drivers. I already have LGUnitedMobileDriver v.3.10.1 connection drivers installed from their website.
Please help, I am really stuck here..... and have no clue what to do. I am fairly new with rooting and modding, and I am extremely miserable.
The phone is still under warranty from LG. Anyone if all else fails, and since the phone has no screen or lights, whether they would replace it?
Attaching the exitrecovery.zip that I used.
sobbing....
babaghanush said:
hello,
I hope someone can help me with my AT&T LG Optimus Pro G phone, which I have royally screwed up.
I was experimenting with the cyogen mod and after installation I installed the freegee app and once the cwm recovery was installed, I decided to go into the recovery by holding down up volume and power button.
Once I was in recovery for CWM i couldn't exit out, and the phone constantly booted into recovery after every reboot, even if i took out the battery, and powered it on.
I tried reflashing the cynogen mod through the sd card, and even though I would get success message the phone would still reboot into the cwm recovery.
I started doing research on the internet and i found file exitrecovery.zip that could be used to possibly get the phone out of the cwm recovery.
After installing exitrecovery.zip, I rebooted the phone, and now I have complete black screen. There are no light, no hints the phone is even turning on, and I can't get into recovery( or at least I can't tell). The only thing now is that when i connect the phone to the computer the window tries to install drivers for the device, and eventually prompts to insert a CD for LG drivers. I already have LGUnitedMobileDriver v.3.10.1 connection drivers installed from their website.
Please help, I am really stuck here..... and have no clue what to do. I am fairly new with rooting and modding, and I am extremely miserable.
The phone is still under warranty from LG. Anyone if all else fails, and since the phone has no screen or lights, whether they would replace it?
Attaching the exitrecovery.zip that I used.
sobbing....
Click to expand...
Click to collapse
Find flow ROM with expansion .exe and try it to sew from a computer.
could you further elaborate please
lykosha said:
Find flow ROM with expansion .exe and try it to sew from a computer.
Click to expand...
Click to collapse
hi, thanks for your reply. Again I very much new to the rooting and android OS tinkering, and nowhere close to an experienced user.
I tried to use google with your information in regards to how to use flow ROM with expansion.exe, but did not get any leads.
I would appreciate if you could elaborate more on this process.
When my phone is connect to the computer via usb is is constantly trying to install drivers. I had already installed LG usb connection drivers in the past and it was successful. It almost seems it tries to install driver yet fails after receiving no input from the phone, and then request LG CD with drivers.
babaghanush said:
hi, thanks for your reply. Again I very much new to the rooting and android OS tinkering, and nowhere close to an experienced user.
I tried to use google with your information in regards to how to use flow ROM with expansion.exe, but did not get any leads.
I would appreciate if you could elaborate more on this process.
When my phone is connect to the computer via usb is is constantly trying to install drivers. I had already installed LG usb connection drivers in the past and it was successful. It almost seems it tries to install driver yet fails after receiving no input from the phone, and then request LG CD with drivers.
Click to expand...
Click to collapse
Try to find driver on the web-site of producer. Set them. Overload a vehicle in Bootloader. In the controller of devices on компе must be determined your device. Then on a computer start sewing - .EXE.
Did you get this problem resolved? I have the exact problem with the exact phone!!!
thank you very much
Hi,
I just got an Arnova 10D G3 and it doesn't boot. All I get is the "Arnova" logo on a black screen. I bought it on a refurbished condition, it was a pretty good deal so I am ready to do any risky procedure to make it work since I don't have much to lose.
I downloaded the latest firmware from the official website but I am unable to use it because I can't access the recovery mode. When I try to, the tablet reboots while loading this mode, without even showing a menu.
When I connect the tablet to my laptop on Linux, nothing happens. On Windows 8, there is an "Android" device shown at the bottom (in the task bar), but the tablet doesn't appear as a drive.
How can I fix this? Is there a way to somehow force the re-installation of Android?
Thanks
PS : It is my first post on this website, so I hope I'm in the right section.
Hi guys!
Long story short I have a TF101G stuck in bootloop after a failed attempt to install a new recovery, I searched here for a possible solution and i found "OneClickRecovery" that seems to suit my situation perfectly.
My problem is that my device in not recognized by my computer (windows 10, but i tried also Ubuntu and Windows 7): when i plug it, device manager doesn't read any new device.
I manage to get it recognized in APX mode, but from what i have read around this forum solution as "wheelie" and "Easyflasher" works only for TF101.
Thanking you in advance for your help in this matter, I look forward to your reply