[Q] p3110 stuck on logo after Heimdall root and Odin root... - Galaxy Tab 2 Q&A, Help & Troubleshooting

Hi,
I've been using Linux for over ten years but am a newb with tablets and flashing etc. Thought I'd be able to stick Linux on my P3110 but soon realized I needed to take baby steps first. So I tried Heimdall to root my device according to the instructions on androidauthority.com galaxy-tab-2-7-0-p3110-root-clockworkmod-recovery-96473
This did not work so despite many attempts so I eventually filed a bug report for Heimdall which was addressed in the wip/1.4RC3 branch... which I may have got a bit too eager to use before it was quite ready. I rebuilt despite the warning the build files weren't then updated. I tried it anyway and it didn't seem to work, but third time or so lucky it appeared to work. Unfortunately the P3110 reset but stayed stuck on the Samsung logo.
I've now got a Vista install inside VirtualBox and have sucessfully used Odin to flash CWM Recovery onto it, and then used CWM recovery to install some other root package ( tips4tab.com how-to-root-and-install-clockworkmod-recovery-on-samsung-galaxy-tab-2-7-0-wi-fi-gt-p3110 ) but still have the same result: the P3110 stays stuck on the logo.
So all the while I've been researching how to do this I've seen hints the solution is to install the stock rom onto the device, but many solutions seem to involve Kies which from my experiments thus far won't recognize a non-working device such as mine.
Anyway, I eventually found sammobile.com and am currently downloading P3110XXCLK7_P3110OXACLK7_BTU.zip which is the latest firmware for my P3110 (UK) which from what I believe needs to be copied to an SD card and the SD inserted into the P3110.
My question is does this sound like the right thing to do to get my device working again?

Yes extract the 1.1gb P3110XXCLK7_P3110OXACLK7_HOME.tar.md5 from the Zip and use Odin to install it to the P3110. It takes some time and afterward you'll see a yellow android dancing the dance of life with a blue data stream. After rebooting the device will then take you through the initial setup stage again

good
Yea just what dat guy is sayin :good:

Related

Sgh-t869 cwm?

Hey guys, I just got a T-Mobile SGH-T869 and it came with Honeycomb on it.
I've been able to root it (which was as dumb as flashing a ZIP on the stock recovery), and I've flashed the CWM 5 I found (here). However, I'm unable to flash CM10 from that, so I'm looking to figure out what's wrong or the missing step.
Any suggestions?
Just to follow up on my own issue, I figured it'd be a good idea to update my SGH-T869 to ICS, because HoneyComb is kinda terrible.
For this device, at least for now, the "official" ICS update isn't being made available over the air, only available via the Samsung Kies program.
Its totally free and you can get it for Mac or Windows here http://www.samsung.com/us/kies/
The procedure to update was seriously as dumb as "Install Kies, then plug in your device".
Kies should auto-detect and in the case of my SGH-T869, it immediately offered to update the firmware. However, Kies requires your battery to be charged up before it'll let you proceed, so initially it didn't allow me to flash (my battery was down to around 43%).
After updating this way, everything was back to stock and I had no root anymore.
I re-obtained root by downloading the two attached files. The attached CWM is a "temporary" touch-enabled version. Flashing it from the stock recovery boots you into CWM but after you reboot, its gone. I booted to that and then flashed the attached root.zip, which re-established root on my tablet.
So, sort of progress. Next step: figure out how to get CM10 on this bad boy, since the stock ICS kinda blows

[Q] New Note Pro?

Hey guys, I just got my Note Pro a week ago and just started looking into rooting. I keep getting a notification about a 128mb stability update. I would assume it's gonna update to the latest build but I'm not sure what the latest build is or if it'll be rootable afterwords. my current build is KOT49H.P900UEU1ANAE. What is the latest build #? Is there a list of updates somewhere detailing what the improvements are? I just want to root, debloat, turn off OTA and remove KNOX.
Edit: sorry forgot to mention it's just the wife model SM-P900
So 48 views and not one person can tell me the latest build# ? I'll figure out the rest.
Sent from my SM-N900V using Tapatalk
Have you checked SamMobile?
http://www.sammobile.com/firmwares/database/SM-P900/XAR/
How i got there:
http://www.sammobile.com
1. Click Firmware on the top.
2. Click the greyed out firmware database link under the blue banner.
3. Under "Select your firmware" I picked Tablet-->Android-->SM-P900....-->Cellular South (which matches the US variants)
muzzy996 said:
Have you checked SamMobile?
http://www.sammobile.com/firmwares/database/SM-P900/XAR/
How i got there:
http://www.sammobile.com
1. Click Firmware on the top.
2. Click the greyed out firmware database link under the blue banner.
3. Under "Select your firmware" I picked Tablet-->Android-->SM-P900....-->Cellular South (which matches the US variants)
Click to expand...
Click to collapse
Thanks muzzy! I had already been to SamMobile but all it had was foreign countries listed. I didn't know about Cellular South being the US version. I'll look again.
Edit: oh look a list of the updates and release dates! My Wi - fi reception seems slow, do any of the update fix that?
I honestly can't say. I'm on NC5 which is dated back in April and have no major issues.
I'm rooted and debloated though, not that this would impact the wifi performance . .
48 views doesn't mean 48 users. About 44 of those are Google Content Crawler, which is Google search engine's bots crawling the net for content to display in google.com. It is an automated process.
Samsung doesn't release changelists, so we don't know what each update does beyond what we can see.
Thanks for the help guys! I just accepted the first update and it took me to ANC5. I guess I'll have to accept all updates until current and then try CF-Auto-Root. I'll report back then.
Actually I just got my tablet like a week ago as well. I m on the same build no as well....haven't updated yet. I also haven't installed Knox either. There is a download arrow on the Knox icon and if I click the icon it starts downloading so I just cancel it. I am thinking of rooting as well. Well what I m trying to say is...keep the thread updated and I will just follow your lead.....hehe.
It always helps to know your country as well as different countries are on slightly different versions. You can always go to sanmobile.com, click on firmware and search for p-900. That will give you the list of all the latest ROMs for different countries / carriers. US based ROMs are listed as "Cellular South".
Successful Root!
Okay guys sorry it's taken so long to respond, I had hernia surgery on Monday so I've been behind on getting this rooted.
My plan was to use CF-Auto-Root and then load TWRP recovery and then load "Debloat Stock Variant" by Gatsrom. I decided to do it in that order because I wasn't sure I could load a custom recovery without being rooted first.
I accepted all updates up to the current = P900UEU1BNK1. Using Win 7 and loaded Samsung drivers. Downloaded ODIN 3.09, Odin 3.07 came with CF-Auto-Root and downloaded TWRP. Booted into download mode and made sure ODIN recognized my P900. And this is when to fun began! Everything seem to be going okay but I did run into a snag. I used ODIN 3.07 because that's what came with Auto- Root and I'd read somewhere of people having trouble with 3.09??? Anyways I got a red "FAIL" message and my screen displayed multicolored lines. I tried running it in ODIN 3.09 and got the same result. (i didn't disconnect anything between the 3.07 or 3.09 attempts, maybe i should have?). I disconnected my P900 and it rebooted giving me a Firmware Error screen telling me to use Kies "Recovery Mode". I tried Kies Recovery but Kies3 wouldn't even recognize the P900. (I started freaking a little at this point!) Anyways, I decided to try and load TWRP because I thought I've got nothing to lose! I loaded TWRP into ODIN and it took, so I thought, because my P900 rebooted into an up and running normal state. (Big Sigh!) I tried booting into recovery but TWRP didn't take, it came up to stock recovery, trying to load TWRP just kicked the P900 out of the Firmware Error state it was in?? I decided to give Auto-Root another go after rebooting Win 7. Used ODIN 3.09 this time and everything went fine and I was rooted! Then I loaded TWRP and it loaded fine! I performed a TWRP backup at this point and things seem to be running smoothly. I still need to load the Debloat Variant, that's what's on my plate for today.
http://forum.xda-developers.com/showthread.php?t=2656551
http://forum.xda-developers.com/showthread.php?t=2706982
http://forum.xda-developers.com/gal...t/rom-original-stock-debloated-stock-t2860069
You are a much braver sole than I. Hope all goes smoothly.
I could be wrong but I would think that if one is going to a different ROM then rooting isn't necessary. Simply use Odin to flash TWRP but ensure that auto reboot is not enabled in Odin when you do it. If you allow the device to begin booting into stock system it's going to overwrite recovery again (with stock recovery) so what you want to do is flash TWRP, and once it's flashed FORCE a reboot directly into recovery again using the hardware keys on the device. At that point you can do an nandroid backup and then flash your ROM.
Sent from my SM-P900 using Tapatalk
treetopsranch said:
You are a much braver sole than I. Hope all goes smoothly.
Click to expand...
Click to collapse
I'm not that brave treetop! I just know my way around a computer and I've rooted a few of these things. Plus I know the guys here on XDA are good at helping out if you hit a snag. Luckily I figured this one out on my own! You've just gotta do your research before jumping in and search read, search read, search read! I provided some links to get you started....get to it!
muzzy99 said:
I could be wrong but I would think that if one is going to a different ROM then rooting isn't necessary. Simply use Odin to flash TWRP but ensure that auto reboot is not enabled in Odin when you do it. If you allow the device to begin booting into stock system it's going to overwrite recovery again (with stock recovery) so what you want to do is flash TWRP, and once it's flashed FORCE a reboot directly into recovery again using the hardware keys on the device. At that point you can do an nandroid backup and then flash your ROM.
Sent from my SM-P900 using Tapatalk
Click to expand...
Click to collapse
Thanks for the info muzzy, I'll remember that for next time! :good:
I did get the Debloat Variant up and running and loaded Xposed framework with sdcard full access. Everything seems to be running smoothly!
Ok So I finally got to it and successfully rooted (in first try, if I may add ). Thanks to xblue's guide/heroic efforts I avoided certain things and everything went smoothly. So Basically I installed samsung drivers using Kies, rebooted pc (Win 8.1). Downloaded cf autoroot and downloaded odin 3.09 as autoroot comes with 3.07. Replaced ONLY 3.07 odin exe with 3.09. Started Odin in Admin mode, put the tablet in download mode. Attched to pc and Odin recognized it. Then Gave it a final thought......lol. Pressed Start, device booted couple times. Then PASS appeared on the Odin window after like 30 secs. Installed root checker...successfully rooted. Installed TWRP via odin and flashed that successfully. Made a full back up and installed a ROM of my choice. I am a happy camper.
Sweet Deal singhsta! I'm glad my efforts were a help!
i would update to the latest version.. i tried using the original one that you have however i got the screen flicker issue so had to update.. the first update isnt very good wifi keeps dropping but the most recent version doesn't tho you may have a bug where every time you unlock the screen the tablet is still asleep even though the icons are visible so you have to lock the screen again and unlock. however if you factory reset this bug goes away.
i find the latest version is the most stable and battery life is better if you disable all the unnecessary apps that you can i usually get rid of most of the samsung back up apps and all the google ones bar the ones it needs to run play store etc and maintaining the ones that sync for back up.
wifi was really slow when i first got it and would drop very annoying but now it seems better but have experienced slow wifi i think it's a hardware issue all note pro's have in built that should have been sorted by the latest build. i hope they finally give it an update in the coming months even to 4.4.4. or something.

I might have permanently bricked my phone

Hey, I made this account to ask this question I'm pretty desperate,
My phone was acting up (overheating, WiFi didn't work half the time), so I decided to reflash my cyanogenmod rom, me being the idoit that I am I didn't do a backup before formatting my phone, I tried to flash the zip file but twrp kept crashing, so the next logical step was to use ADB sideload to flash the rom, that didn't work as well as I expected either the install kept failing at 88% as I was rebooting the phone for yet another attempt, recovery wouldn't start at all, at that point I was pretty frustrated, so I decided to flash the phone back to stock touchwiz, I downloaded the stock firmware and attempted to flash it with odin, low and behold that didn't work either (auth error), I tried again multiple times with firmware files downloaded from different sites but those didn't work either, I also tried flashing stock PIT files to no avail.
So here I am at 5 am with a bricked phone and 8gb of tar files on my desktop any help at all would be greatly appreciated.
Thanks in advance.
i know this thread is old, but can you get to download mode still?
What's the model and type of phone is this ?

Samsung Galaxy S4 "I9505" Black Edition Firmware Flash Issues

Greetings.
I didn't post in very long time on this forum,since I could handle most of the problems on my own,now I need some andvanced tips and advices,so I'm reporting in.
I bough myself a Samsung Galaxy S4 Black Edition last year here in Bosnia and Hercegovina.Beautiful phone,never got a scratch on it,It had Android 4.2.2 Jelly Bean out of the box but all of the features from basic S4 except one,it couldn't update firmware to Lolipop 5.0.1.
That used to bother me,since I had much older devices that supported JB and this phone was just special,enough that I couldn't let it be my daily driver having unused potential,so i threw myself at work(which will later prove a very bad decision).
I checked for OTA updates in the settings and that option would litteraly do nothing,providing no info,or searching for new updates.
Smash that Build number,got into developer mode,toggle USB debugging,Install Kies on PC,run it as Admin,download latest drivers,connect the device,Firmware update asks for IMEI and s/n,type them in,says to check my s/n and IMEI,do that few times under different compatibility options,still the same.
I thought it must be something bad with data/catche so i reset to recovery mode and wipe them out,setup the phone,enter the OTA update for second time,it shows me "Your device have been modified, Software updates are not available", check device status and it states "Samsung",after several attempts it sometime said "Modified" sometimes "Samsung",Kies didn't recognise the device through all this process.
I was already lost here,but I thought,hell Kies isn't working,neather is OTA,i could flash using Odin,that might do the trick.
Went to Sammobile,downloaded latest drivers and Odin,found one Firmware that I though was compatible.,unbloked them in properties and set to rin as Admin.
Uninstalled Kies and checked for leftover drivers again,and it was all clear to go,ran odin,mounted firmware,set device in download mode and started flashing but Odin poped out "complete(write) operation fail" error.
Didn't want to try fixing it,went straight back to SM and downloaded two other firmwares,one said "complete(write) operation fail",and the other "Re-Partition operation failed",so I thought Odin was bad,since I checked on two PC's with several USB ports.
Download two more versions of Odin and find a stock s4 PIT file here somewhere for repartrition error.
Extracted everything,unblocked and ran with privilegies,same thing on both Odin versions,except that only Odin 3.07 could flash the pit file alone with no problems it passed.
Next time i ran download mode i tried to flash the firmware write fail came up again,extracted recovery and flashed it alone,worked like a charm,so I tried flashing once again,it proceedes a little further with same write error.
Reset the phone to wipe data and catche and it goes into "Firmware Upgrade Encountered An Issue Error",Install kies,it still doesn't recognise the phone.
Out of option right now I go for search of alternative recovery software,and I found the famous "Dr.Fone" (how stupid I was to not read all those,"if it wasn't for this software my phone would die" comments)
Installed it,ran recovery my phone shuts down and displays "set warranty bit: kernel message",from this point nothing works except recovery mode,so I install CWM recovery and flash a Custom ROM,now only this option that sets my phone in working order and I want to recover it's Firmware back,Anyone that could help me with this issue,or had it solved before?
Atleast give it a try.
this amount of pain can't be titled
Drow_Warlord said:
Greetings.
I didn't post in very long time on this forum,since I could handle most of the problems on my own,now I need some andvanced tips and advices,so I'm reporting in.
I bough myself a Samsung Galaxy S4 Black Edition last year here in Bosnia and Hercegovina.Beautiful phone,never got a scratch on it,It had Android 4.2.2 Jelly Bean out of the box but all of the features from basic S4 except one,it couldn't update firmware to Lolipop 5.0.1.
That used to bother me,since I had much older devices that supported JB and this phone was just special,enough that I couldn't let it be my daily driver having unused potential,so i threw myself at work(which will later prove a very bad decision).
I checked for OTA updates in the settings and that option would litteraly do nothing,providing no info,or searching for new updates.
Smash that Build number,got into developer mode,toggle USB debugging,Install Kies on PC,run it as Admin,download latest drivers,connect the device,Firmware update asks for IMEI and s/n,type them in,says to check my s/n and IMEI,do that few times under different compatibility options,still the same.
I thought it must be something bad with data/catche so i reset to recovery mode and wipe them out,setup the phone,enter the OTA update for second time,it shows me "Your device have been modified, Software updates are not available", check device status and it states "Samsung",after several attempts it sometime said "Modified" sometimes "Samsung",Kies didn't recognise the device through all this process.
I was already lost here,but I thought,hell Kies isn't working,neather is OTA,i could flash using Odin,that might do the trick.
Went to Sammobile,downloaded latest drivers and Odin,found one Firmware that I though was compatible.,unbloked them in properties and set to rin as Admin.
Uninstalled Kies and checked for leftover drivers again,and it was all clear to go,ran odin,mounted firmware,set device in download mode and started flashing but Odin poped out "complete(write) operation fail" error.
Didn't want to try fixing it,went straight back to SM and downloaded two other firmwares,one said "complete(write) operation fail",and the other "Re-Partition operation failed",so I thought Odin was bad,since I checked on two PC's with several USB ports.
Download two more versions of Odin and find a stock s4 PIT file here somewhere for repartrition error.
Extracted everything,unblocked and ran with privilegies,same thing on both Odin versions,except that only Odin 3.07 could flash the pit file alone with no problems it passed.
Next time i ran download mode i tried to flash the firmware write fail came up again,extracted recovery and flashed it alone,worked like a charm,so I tried flashing once again,it proceedes a little further with same write error.
Reset the phone to wipe data and catche and it goes into "Firmware Upgrade Encountered An Issue Error",Install kies,it still doesn't recognise the phone.
Out of option right now I go for search of alternative recovery software,and I found the famous "Dr.Fone" (how stupid I was to not read all those,"if it wasn't for this software my phone would die" comments)
Installed it,ran recovery my phone shuts down and displays "set warranty bit: kernel message",from this point nothing works except recovery mode,so I install CWM recovery and flash a Custom ROM,now only this option that sets my phone in working order and I want to recover it's Firmware back,Anyone that could help me with this issue,or had it solved before?
Atleast give it a try.
Click to expand...
Click to collapse
Day#4 Fail compilation
I see that this gets no response,but I'll continue this thread just in case I fix this and somebody else gets into same problem themselves.
I mentioned before that I somehow flashed custom ROM over CWM and that helped my phone boot into working state after bootloop error caused by greatest Android software there is on the internet,the legendary "Dr.Fone"
The Custom rom used was "[OFFICIAL][i9500][5.1.x] CyanogenMod 12.1 for Samsung Galaxy S4 [NIGHTLY]" From xda user: Alberto96 (thank you friend).
After several other failed attempts of implementing Stock firmware on this bricked device over the PC,I got to the point where I think that it's literally imposible to make it work since I tried so many ways and patterns of installation with no difference in the outcome results whatsoever.
I took a moment to rethink my strat over this and googled other ways of flashing that firmware without using PC.
Found 2 possible solutions that I'm trying to make use of,first is Odin Mobile and the Other is FlashFire.
Since both require rooted devices,finding way to root bricked S4 wasn't a very pleasant experiance,since flashing SuperSU through CWM recovery didn't work,Odin managed to flash me nice Autoroot from Chainfire over the custom ROM I installed before,I found a problem even there since the I9505 autoroot wouldn't work,the custom firware had changed the phone model to I9507 that I downloaded the Autoroot for,was a confusing issue,but I managed to root it anyways.
Page I used for this purpose was Chainfire Autoroot database(sorry if I'm violating forum rules but I think this could be left here without further discussion about it).
After rebooting the device I downloaded Rootcheck software along with SuperSU and FlashFire which confirmed that it's fully unlocked/rooted.
Now I'm recharging my phone so I can later tonight go ahead and transfer firmware to it's SD card and try to flash it once again with FlashFire,last option I'm thinking of as of now if this wouldn't have any progress is to download Odin mobile and try another flash,I'm running out of ideas on this one.
Sorry for the long posts,but these get no respose so who cares.

GT-N8010 - Firmware Upgrade

Hey there!
Just ran into some troubles with my GT-N8010. I had been using stock on it for quite awhile, but have been noticing that many of the newer apps do not work with JB. I had rooted and used my Asus Transformer before, figured that it was probably about time to get some more life out of the Note 10.1.
My first option was to upgrade from JB to KitKat. Unfortunately there is not an official update in Canada, but using Odin I should have been able to upgrade it. This is where the issues came. First, it failed twice. I restarted the computer, and tried it once more. Success! It was downloading. It took a few moments, but eventually it failed as well. The download stopped and I was left looking at my tablet having 3/4 of the install complete. I left it for awhile, hoping that it would restart itself or reload. Nothing happened, and I had to restart the tablet.
Situation now: I am stuck at the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
First thing I tried was getting to the download screen, so I have that. I figured I could just flash it back to the offical JB from Canada, but now it's like the computer won't recognize the device. Even unplugging and plugging the USB back in does not even give me the PC Recognizing sound. I moved to a laptop, and it could read the device, but once I installed Samsung USB and Keis, it stopped. Odin doesn't recognize it and I am not sure where to go from here.
Is using the SD card an option? Can I somehow force the computer to read the tablet?
I have looked through the forums, but didn't really see much in the way of help.
I hope to hear from you guys! Thanks in advanced! If I need to provide more information, please ask.
Is using the SD card an option>>> NOT for stock custom rom only .
I don't mind installing a custom rom at this point. If it is still an option at this point the I don't mind at all. If there is anyway you could point me towards that option, I will definitely give it a shot.
The development threads.
You will need to flash a custom recovery tar through Odin .
https://forum.xda-developers.com/showthread.php?t=2490954
Part of the problem is that the Odin, even my PC, are not recognizing the the Tablet is connected through my USB. So I cannot flash anything right now.
I figured it out. It was all because of my cord. I went out and got a new one, flashed 4.4.2 easily. Hope that helps everyone who has issues as I did.
elevenstewart said:
I figured it out. It was all because of my cord. I went out and got a new one, flashed 4.4.2 easily. Hope that helps everyone who has issues as I did.
Click to expand...
Click to collapse
Hi, I've read your posts. Helpful.
I'm in the situation of having tried to flash a custom recovery, to then flash a custom ROM.
Started Odin, began to flash, then Odin showed failed.
Now the n8000 no longer starts, just hangs after the Samsung logo/music.
I do have two different cords, so will try that later.
Question, did you end up flashing a custom ROM later, and if so, which one?
Thanks.
Sent from my SM-N920C using Tapatalk
I have a Samsung Galaxy GT-N8010 (UK version), Android 4.1..2 - i need to get this up to KitKat 4.4.2 as BT Sport app won't run on below v4 - help?
Search this forum its well answered.
Or
Sammobile.
Updato.
Two firmware site

Categories

Resources