hi every one ... yesterday i lost my recovery but with help of some experts here i get it back again using simfirmware , i rooted my phone using "superoneclick" then i've created a back up using "titanuim backup" exactly as it's motioned on the GUIDE but the following step is "Installing Stock Roms" it means a firmware ... but i did it yesterday to get back my recovery ... should i do it again "necesary"??? or just moving directly to next step which is "Installing Custom Recovery" ... plz your opinion is important to me
anonymooos said:
hi every one ... yesterday i lost my recovery but with help of some experts here i get it back again using simfirmware , i rooted my phone using "superoneclick" then i've created a back up using "titanuim backup" exactly as it's motioned on the GUIDE but the following step is "Installing Stock Roms" it means a firmware ... but i did it yesterday to get back my recovery ... should i do it again "necesary"??? or just moving directly to next step which is "Installing Custom Recovery" ... plz your opinion is important to me
Click to expand...
Click to collapse
For installing "RECOVERY"-you need 2.3.6 (Gingerbread)
Or else you will end up with same situation as before.
So make sure you are on Gingerbread first
If you already on Gingerbread then no need of that step..install recovery and then flash roms.
If you are on Froyo then flash Gingebread first..then recovery and then roms.
Harryhades said:
For installing "RECOVERY"-you need 2.3.6 (Gingerbread)
Or else you will end up with same situation as before.
So make sure you are on Gingerbread first
If you already on Gingerbread then no need of that step..install recovery and then flash roms.
If you are on Froyo then flash Gingebread first..then recovery and then roms.
Click to expand...
Click to collapse
no i'm still with froyo and i want to take it off ... i've downleaded nightly GB V9 aokp devloped by ravi basawa ... can i install it without passing through gingerbead ??
anonymooos said:
no i'm still with froyo and i want to take it off ... i've downleaded nightly GB V9 aokp devloped by ravi basawa ... can i install it without passing through gingerbead ??
Click to expand...
Click to collapse
No you can't..
CWM 5 doesn't support froyo and without CWM recovery you cannot flash a rom.
anonymooos said:
no i'm still with froyo and i want to take it off ... i've downleaded nightly GB V9 aokp devloped by ravi basawa ... can i install it without passing through gingerbead ??
Click to expand...
Click to collapse
nope.
because there are more changes from froyo to gb than you can know so use odin and flash the latest gb stock rom(ddkt3 for india).
Harryhades said:
No you can't..
CWM 5 doesn't support froyo and without CWM recovery you cannot flash a rom.
Click to expand...
Click to collapse
ah i see so gingerbread can be done without CWM ... if it's like that plz give me a link for a recomended gingerbread ... and thnx a lot
anonymooos said:
ah i see so gingerbread can be done without CWM ... if it's like that plz give me a link for a recomended gingerbread ... and thnx a lot
Click to expand...
Click to collapse
here is the GB for india http://www.hotfile.com/dl/146050815/b3b9278/S5670DDKT3_S5670ODDKT2_INU.zip.html
Use the video that I gave you before.
Its same as flashing froyo using odin.
And don't say thanks..press it.
Harryhades said:
here is the GB for india http://www.hotfile.com/dl/146050815/b3b9278/S5670DDKT3_S5670ODDKT2_INU.zip.html
Use the video that I gave you before.
Its same as flashing froyo using odin.
And don't say thanks..press it.
Click to expand...
Click to collapse
oook man it's done but the india version uses engligh ?? bcz i need a frensh version ... if u don't have it it's ok ...
anonymooos said:
oook man it's done but the india version uses engligh ?? bcz i need a frensh version ... if u don't have it it's ok ...
Click to expand...
Click to collapse
It should have french,because I don't see any firmware specially made for france here..
But whats the point? you are going to root and install a custom firmware anyway right?
I see a german version http://www.hotfile.com/dl/168101698/7eed3f5/S5670XWKTI_S5670DBTKT1_DBT.zip.html
And UK/Ireland (2.3.5) http://www.hotfile.com/dl/147668072/6bc14e6/S5670XWKQA_S5670OXXKQ2_XEU.zip.html
These are the only two european countries here..
Harryhades said:
It should have french,because I don't see any firmware specially made for france here..
But whats the point? you are going to root and install a custom firmware anyway right?
I see a german version http://www.hotfile.com/dl/168101698/7eed3f5/S5670XWKTI_S5670DBTKT1_DBT.zip.html
And UK/Ireland (2.3.5) http://www.hotfile.com/dl/147668072/6bc14e6/S5670XWKQA_S5670OXXKQ2_XEU.zip.html
These are the only two european countries here..
Click to expand...
Click to collapse
yah i'm trying to install a costum rom ...so it's doesn't mean off whish version of gingerbread it is ... thnx again
anonymooos said:
yah i'm trying to install a costum rom ...so it's doesn't mean off whish version of gingerbread it is ... thnx again
Click to expand...
Click to collapse
Yeah. You can install cwm5 on any gingerbread. After installing cwm5 install your downloaded rom via recovery, take a beer and enjoy
Sent from my GT-S5670 using Tapatalk 2
Related
many days ago i just flash xxkpg rom gingerbread , then i install alienmod theme and all works pretty cool 4 me , im in caribbean area (puerto rico) everything was working fine, im an athlete and i found out that i have gps issues since tha day i flash this rom , it f.c. the calculator too, but my fit looks great, it feels so much faster, well everything good but that
maccutto said:
many days ago i just flash xxkpg rom gingerbread , then i install alienmod theme and all works pretty cool 4 me , im in caribbean area (puerto rico) everything was working fine, im an athlete and i found out that i have gps issues since tha day i flash this rom , it f.c. the calculator too, but my fit looks great, it feels so much faster, well everything good but that
Click to expand...
Click to collapse
Just switch to another ROM! Kpg Rom that you have is very buggy !!.. I'll suggest to install XXKPL ROM or KWQ2 ROM ....but i think XXKPL is much better ..you can also install a custom ROM FITDROIDv2.0 on XXKPL ROM...and its really fast and great!!....search for it in the development section!!....
new rom..
neil.richard said:
Just switch to another ROM! Kpg Rom that you have is very buggy !!.. I'll suggest to install XXKPL ROM or KWQ2 ROM ....but i think XXKPL is much better ..you can also install a custom ROM FITDROIDv2.0 on XXKPL ROM...and its really fast and great!!....search for it in the development section!!....
Click to expand...
Click to collapse
did i have to doit thru odin ????
maccutto said:
did i have to doit thru odin ????
Click to expand...
Click to collapse
Yup!....1st you have to flash de-odexed KPL ROM using odin.. And then flash CLOCKWORKMOD RECOVERY via odin...and then you can simply flash FITDROIDv2.0 custom ROM via CLOCKWORKMOD RECOVERY (using only your fit,odin not required!)...ALL THE FILES ARE THERE IN THE «FITDROIDV2.0» thread in the «DEVELOPMENT» SECTION...BEST OF LUCK!!
another?
neil.richard said:
Yup!....1st you have to flash de-odexed KPL ROM using odin.. And then flash CLOCKWORKMOD RECOVERY via odin...and then you can simply flash FITDROIDv2.0 custom ROM via CLOCKWORKMOD RECOVERY (using only your fit,odin not required!)...ALL THE FILES ARE THERE IN THE «FITDROIDV2.0» thread in the «DEVELOPMENT» SECTION...BEST OF LUCK!!
Click to expand...
Click to collapse
do i have to take sim card and sd out off the phone while doing this cause 4 the xxkpg the instructions says that need to gaet the sim and sd out off the phone, same with this, or i leave the sim card and sd card inside phone while the process?
p.s. the fitdroid rom its 2.3.4. ginger or 2.3.3?
thanks!
maccutto said:
do i have to take sim card and sd out off the phone while doing this cause 4 the xxkpg the instructions says that need to gaet the sim and sd out off the phone, same with this, or i leave the sim card and sd card inside phone while the process?
p.s. the fitdroid rom its 2.3.4. ginger or 2.3.3?
thanks!
Click to expand...
Click to collapse
Yes, you need to take out the sd card and sim card , as there are chances that they might get corrupted!
FITDROID IS A CUSTOM ROM WHICJ WORKS ON XXKPL (android 2.3.4) firmware...i have already told you the steps to flash all the things in the above post! . go for it!
thank you
neil.richard said:
Yes, you need to take out the sd card and sim card , as there are chances that they might get corrupted!
FITDROID IS A CUSTOM ROM WHICJ WORKS ON XXKPL (android 2.3.4) firmware...i have already told you the steps to flash all the things in the above post! . go for it!
Click to expand...
Click to collapse
richard thank you very much , thanks to take a lil time and spend it on this with me, thanks again.!!!!
maccutto said:
richard thank you very much , thanks to take a lil time and spend it on this with me, thanks again.!!!!
Click to expand...
Click to collapse
My pleasure....I AM ALWAYS READY TO HELP!!!....is your gps working fine now?
gps running?
yup, yup i reflashed the fitdroid nd i do alienmod and works really good thank you
i just joint this site and have been searching for roms which i can root to. my phone is currently running 2.3.6 DDKT1. if anyone would just give the link of a ROM which will work on my phone i would be thankful.
all ROMs are gonna run fine. Some good, the others better.
just go to the development section and find a ROM that suits you. Follow the Instructions and you'll be fine.
Try using a program such as ROM Manager, and you'll be screwed.
i see that ur currently using RazaDroid v1.0 at 801MHz. how do i also get it? im new to this so how do i root my device to ur ROM? and is 801MHz stable??
hey man
here can you get it (RAZODROID V1)
http://forum.xda-developers.com/showthread.php?t=1430889
and here for root your device
http://forum.xda-developers.com/showthread.php?t=1252699
i have razodroid v1 on my device with 763 Mhz OC
and it runs fastand thats enough for me
cheers
lomash said:
all ROMs are gonna run fine. Some good, the others better.
just go to the development section and find a ROM that suits you. Follow the Instructions and you'll be fine.
Try using a program such as ROM Manager, and you'll be screwed.
Click to expand...
Click to collapse
are you sure, there gonna be no problem installing all those roms on 2.3.6, because they mentioned to flash it over 2.3.4 !
no, no problems at all.
sid_rangra said:
are you sure, there gonna be no problem installing all those roms on 2.3.6, because they mentioned to flash it over 2.3.4 !
Click to expand...
Click to collapse
yea thats my point of creating the thread. i wanted to know which rom i can flash over my 2.3.6 DDKT1. in other roms they mention to flash only over 2.3.4!
Install Clockworkmod Recovery from here
http://forum.xda-developers.com/showpost.php?p=19204364&postcount=1
Get your desired ROM from the android development section
RazoDroid : http://forum.xda-developers.com/showpost.php?p=21084978&postcount=5
Instructions : http://forum.xda-developers.com/showpost.php?p=21085024&postcount=8
I am going to try it today. Will post the results soon.
lomash said:
Install Clockworkmod Recovery from here
http://forum.xda-developers.com/showpost.php?p=19204364&postcount=1
Get your desired ROM from the android development section
RazoDroid : http://forum.xda-developers.com/showpost.php?p=21084978&postcount=5
Instructions : http://forum.xda-developers.com/showpost.php?p=21085024&postcount=8
Click to expand...
Click to collapse
thanks a lot!! ill do this soon. and post the results if any bugs,etc later.
hi there all, i tried a lot of roms but always with some bugs, i want a rom that is total correct, with a good battery life and no bugs in it. I want an answer that tells how to flash it step by step and thanks for everything.
Ditbardh said:
hi there all, i tried a lot of roms but always with some bugs, i want a rom that is total correct, with a good battery life and no bugs in it. I want an answer that tells how to flash it step by step and thanks for everything.
Click to expand...
Click to collapse
lol dude im still on the titanium rom,.. 100% no problems you still havent told me what you had go wrong in our little convo .
Lemme know it could be a simple fix the dev's who made titanium cant answer all
Hi there. Download cleankpurom from dev section.
1. Flash kpe with odin
2. Flash kpu with odin
3. Download cf-root universal (amit bagaria) and flash with odin
4. Go to recovery, insert the rom in the ecternal sdcard and go to the option install zip from sdcard an ther choose the downloaded cleankpurom.
5. When finish reboot
Is a bugfree rom with good battery life. Hope it helps
Sent from my GT-I9003 using XDA
hi its me so,
if you dont like the looks, no problem go to themes section and there you'll find so many looks even ICS looks etc. even your in cleanKPU just flash the theme with CWM recovery then wipe cache.. ) http://forum.xda-developers.com/showthread.php?t=1215935
@luiseteyo: what rom u use? u use this ones as u sad or you're just saying this just to help me, btw thanks all for the answers
hello. after using some betas I stayed at poseidon's kpq rom. really stable
+1 poseiden ROM + UC 9
can u find me the links where to download them and how to install them step by step ?
shailm_85 said:
+1 poseiden ROM + UC 9
Click to expand...
Click to collapse
Same before + ics theme from tarunagg
Sent from my GT-I9003 using XDA
shailm_85 said:
+1 poseiden ROM + UC 9
Click to expand...
Click to collapse
can you tell me how to install them step by step plz
If your in XXKPU root first using this http://forum.xda-developers.com/showthread.php?t=1351056 then copy the poseidon rom in sd card http://forum.xda-developers.com/showthread.php?t=1331842 then go to CWM recovery install zip then choose poseidon rom. after that download the v9 kernel here http://forum.xda-developers.com/showthread.php?t=1357747 then follow how to flash it. Guide is inccluded there.
Hope it helps.
marshygeek said:
If your in XXKPU root first using this http://forum.xda-developers.com/showthread.php?t=1351056 then copy the poseidon rom in sd card http://forum.xda-developers.com/showthread.php?t=1331842 then go to CWM recovery install zip then choose poseidon rom. after that download the v9 kernel here http://forum.xda-developers.com/showthread.php?t=1357747 then follow how to flash it. Guide is inccluded there.
Hope it helps.
Click to expand...
Click to collapse
Isn't kpq as a base before proceed to Poseidon rom? I already flash Poseidon rom with kpu but when u dial *#1234#, the baseband is unknown
Sent from my GT-I9003 using XDA
Yes its based on XXKPQ but i tired it with KPU before coz i read that its better w/ KPU.
EDIT- but if you encountered some bugs repeat the method til XXKPQ then flash poseidon.
why people dont use gingerbread standard rom but try this roms with bugs when the standard rom have no bugs ?
Ditbardh said:
why people dont use gingerbread standard rom but try this roms with bugs when the standard rom have no bugs ?
Click to expand...
Click to collapse
I don't think that Poseidon rom has bug
Sent from my GT-I9003 using XDA
Ditbardh said:
why people dont use gingerbread standard rom but try this roms with bugs when the standard rom have no bugs ?
Click to expand...
Click to collapse
Because standard rom is clubbed with lots of applications which are useless and not only take your space but ram too.....most of the custom roms are stripped version and available only after rooting...which will help you to get 'administrative' rights as in case of windows PC.
so you can even decide initial start up !!!!
the design of the stock rom makes me flash it again..
Ditbardh said:
why people dont use gingerbread standard rom but try this roms with bugs when the standard rom have no bugs ?
Click to expand...
Click to collapse
I do it just for a change and to try out different features and looks, that custom ROMs provide. JMHO
i have rooted my i9003 according to following
http://forum.xda-developers.com/showthread.php?t=1351056
but my wifi is not working , now i want install new kernel , please help me how to install and what kernel to download
is there any stable ics rom available for i9003?
farruukh said:
i have rooted my i9003 according to following
http://forum.xda-developers.com/showthread.php?t=1351056
but my wifi is not working , now i want install new kernel , please help me how to install and what kernel to download
is there any stable ics rom available for i9003?
Click to expand...
Click to collapse
Install Bam kernel 14fix, it looks like you rooted from a valuepack and that's why wifi broke.
And no, all ICS roms currently used are for developers and are in no way fit as a daily driver, all of them still contain video recording issue and lag issues.
Just use custom gb roms for the time being if you want a completely stable rom.
Skander1998 said:
Install Bam kernel 14fix, it looks like you rooted from a valuepack and that's why wifi broke.
And no, all ICS roms currently used are for developers and are in no way fit as a daily driver, all of them still contain video recording issue and lag issues.
Just use custom gb roms for the time being if you want a completely stable rom.
Click to expand...
Click to collapse
Please let me know the step by step procedure to install the kernal
farruukh said:
Please let me know the step by step procedure to install the kernal
Click to expand...
Click to collapse
i flashed with PDA_BCK_CF-root_universal_beta14fix and now wifi is working thnks
now if i want to install other custom firmware what should i do install zip file and copy the same to sd card and reboot to revocery mode or via odin or still i need to do something else before
let me know on which firmware u r???
Edit:-sorry we posted at same time. when i was typing ur above poat wasn't written....
hi buddy.
not being rude but maybe using search button next time maybe great..
hehe.. anyways, i'll post the link for you. here you go:
http://forum.xda-developers.com/showthread.php?t=1355675
cheers,
hi guys.
I have problems when installing certain custom ROMS using CWM acording to the Baseband used.
Don't Know why, but when I wanted to install VURRUT KPU again (i had done it several times) Screen keeps on the first image of SAMSUNG SCL I9003 and nothing happens.
I tried to use another custom ROM based on LF2, and when I install it via CWM, it does the same thing, the only difference is that the phone reboots and comes back again to the same SAMSUNG screen.
My phone is galaxy SCL I9003L but i've never had problems installing those ROMs.. It's very strange.
Please if someone could explain me if there is a reason why it's happening this, tell me, i'm a bit scared, using Stock FROYO I9003LUBKB1.
Thanks
Because your'e still in FROYO. Upgrade it first to gingerbread. See my post. General Guide for noobies.
marshygeek said:
Because your'e still in FROYO. Upgrade it first to gingerbread. See my post. General Guide for noobies.
Click to expand...
Click to collapse
i've been in froyo, GB , ICS and JB.. i know how to flash roms and pass from one to other..
But my problem is when I try to Install VURRUT KPU or MASTER ROM LF2..
I had used VURRUT's before with no problems, but not now, and that is my problem.. I don't know why
acu.tm said:
i've been in froyo, GB , ICS and JB.. i know how to flash roms and pass from one to other..
But my problem is when I try to Install VURRUT KPU or MASTER ROM LF2..
I had used VURRUT's before with no problems, but not now, and that is my problem.. I don't know why
Click to expand...
Click to collapse
Oh so ur phone is i9003L!
I think u can try the qwerty Rom, as far as I remember once LoSco (rom dev) told that his rom can also be used for Argentine version of SL i.e; Galaxy SL i9003L.
To confirm, just ask in that thread once then go for flashing it if he says yes.
Hope this helps u.
Sent from my GT-I9003.
Try to do the kpe-pit procedure and clean install vurruts rom
Sent from my GT-I9003 using xda app-developers app