Can someone please help? i was reflashing a sbf, and it said finished, then phone shutdown, when plugged into pc, it shows the white charging light, but it wont turn on with or without battery, and nothing happens when plugged into wall. HELP PLEASE!
take the battery out for 1 min.
get into bootloader mode.
flash correct firmware
What SBF were you flashing?
uk froyo, now it loads the M screen and then shuts off
Boot into recovery and wipe your data/cache...
zencoran said:
uk froyo, now it loads the M screen and then shuts off
Click to expand...
Click to collapse
Beach_Head said:
Boot into recovery and wipe your data/cache...
Click to expand...
Click to collapse
You can do it this way:
Battery out
Battery in
press vol- & power
screen should show /!\
press vol- and vol+ the same time
recovery - wipe data...
If you only see black screen you will not make it to recovery, try the boot only or flash your old ROM again.
Ok so i flashed the 3.4.3-3 UK Tmobile Blur sbf, and then i wanted to clockwork mod - flash the update for the swype and market, but it keep getting status error, how do i fix this?
moto logo
i have issue,,,screen stak on moto logo..
and if i use RSD to flash
the statr bootm dose not work
what to do?
try wiping and every thing..just stuck
hellllllllllllp
zencoran said:
Ok so i flashed the 3.4.3-3 UK Tmobile Blur sbf, and then i wanted to clockwork mod - flash the update for the swype and market, but it keep getting status error, how do i fix this?
Click to expand...
Click to collapse
Your need to be rooted... download SUperOneClick
http://forum.xda-developers.com/attachment.php?attachmentid=489694&d=1295035181
Hi...I accidently loaded a bad buildprop on my XT926 running 4.4.2 and I am rooted and unlocked. The phone has a black screen and will not go into recovery. The phone does vibrate when I push the vol + & pwr and then after 30 sec or so it vibrates twice and still has a black screen. Is there any hope for recovery or is it bricked solid. PS - I do have the buildprop.bak
Thanks for your help.....
Update: I have manged to boot into AP Fastboot Flash Mode with the moto usb connected to my computer. Now what???
Deckard_9732 said:
Update: I have manged to boot into AP Fastboot Flash Mode with the moto usb connected to my computer. Now what???
Click to expand...
Click to collapse
Well, if you have previously installed some custom recovery that has a file manager built in, then boot into it and restore your old buildprop and don't forger to set the correct permissions on it. Or restore soem backup or flash your (custom) ROM anew.
If you can only get into fastboot mode, then fire up RSD lite and flash your phone with the appropriate stock firmware.
Cheers
I only had AP fastboot mode available... I used RSD lite and flashed an .xml...Thank you for your reply!
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Hey! I'm having the same problem with my yu yureka.. Can anyone help me please!
Kaustubh M said:
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Click to expand...
Click to collapse
Hi! I'm having the same problem with this post... Does anyone knows the solution of this problem. I'd be really glad if anyone could help me with this..please!
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
im also having same problem i have also unknowingly wiped system & now im not able to flash any rom while flashing its rebooting automatically & i am able to enter in to fastboot mode then i have flashed factory firmware then also its not booting stucked on boot loop.
arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
Click to expand...
Click to collapse
Bro tried that but nothing........
rss3183 said:
Bro tried that but nothing........
Click to expand...
Click to collapse
Can you be more specific ? Are you facing boot loop too?
anybody please help... facing the same problem and tried the solution as mentioned above but still facing Boot loop. what to do friends. please reply
I suddenly faced bootloop.....then I tried to flash stock rom without root...as a web page suggested me that....it was flashed successfully ...but still I am facing bootloop issue .....can someone pls help me to get out of this mess....pls help me...ASAP !!!
arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
Click to expand...
Click to collapse
as its in boot loop battery has come to an end.... now what? having same problem as the topic creator
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
arunbiju969 said:
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
Click to expand...
Click to collapse
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a point and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Yogesh1969 said:
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a p loopoint and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Click to expand...
Click to collapse
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Sorry for a late reply...
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
The problem got solved bcos it had a battery problem !!!! Battery showed 90-100%, but could not hold up on boot.
A very strange case. Thanks.
Hi, I flashed my Yu Yureka AO5512 Yesterday and entered into recovery mode and selected the wipe userdata option. When it was doing the process after 20min the process stopped all together and My phone does not start at all now. If i press any button there is no response at all. Looks like phones OS and everything is wiped out. How do i go about from here?
Same problem , Stuck in BootLoop
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
YuganshT7 said:
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
Click to expand...
Click to collapse
Sorry to hear that anyway,
By stock lolipop you mean you had the yureka plus with Volte From factory right!!...if so the twrp might have been for the yureka plus with the cm bootloader which got replaced in the new Devcice
I am facing the same problem and in my case I dont think its an battery issue...I was happily using the CM 13.0 Snapshot Rom since a long time...but today morning when I did a soft reset by going into the settings in my yureka...the phone has gone in bootloop...and nothing is working...using fastboot I even flashed the twrp again and also flashed the CM 12.0 Stock firmware..but nothing is working...after the YU logo it restarts....please help...
I am also facing problem maybe worst
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Aditi Apte said:
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Click to expand...
Click to collapse
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
FAILED (remote: unknown command)
Yogesh1969 said:
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
Click to expand...
Click to collapse
But when I am executing other fastboot commands it halts the process between with error "FAILED (remote: unknown command)".
I have read about this error and people suggested that I need to get into "Download mode" not "fastboot/bootload". To get into "download" mode I tried pressing "VoulumeDown+Power+Home", but nothing happened, it simply restarted the phone.
Please advise.
-Aditi
The phone boots to only Download mode. I tried to flash it and nothing changed, still stuck on Powered by Android. I need some help ?. Doesn't boot to recovery or even doesn't display charging screen. If you plug in the charger, it only boots to Powered by Android screen. What could be the problem?
Ghost_mode12 said:
The phone boots to only Download mode. I tried to flash it and nothing changed, still stuck on Powered by Android. I need some help . Doesn't boot to recovery or even doesn't display charging screen. If you plug in the charger, it only boots to Powered by Android screen. What could be the problem?
Click to expand...
Click to collapse
Have you tried rebooting into recovery mode using the buttons (Power/Volume/Home) ? If able to access recovery then try factory reset.
It only boots to download mode. Can't boot to recovery
Aimless Rambler said:
Have you tried rebooting into recovery mode using the buttons (Power/Volume/Home) ? If able to access recovery then try factory reset.
Click to expand...
Click to collapse
Phone doesn't boot to recovery
Ghost_mode12 said:
Phone doesn't boot to recovery
Click to expand...
Click to collapse
If you cant access recovery or download mode using button combination then good luck. I'd read your post as [once plugged in just boots to powered by android]. You weren't too specific. Details help (rom? stock? custom?] Have you tried leaving it on for a few minutes to see if it progresses any further (past powered by android)? Or what? You can't throw out a general statement and expect specific answers. It's like ... my phone broke ... help.
If once unplugged you cant do anything with button combo then maybe google jtag or dongle jig.
It does boot to download mode that's how I flashed stock rom on it. It was running stock before and had issues with the battery on replacing the battery, it went into a bootloop.
Ghost_mode12 said:
It does boot to download mode that's how I flashed stock rom on it. It was running stock before and had issues with the battery on replacing the battery, it went into a bootloop.
Click to expand...
Click to collapse
Did you fix it? I am facing the same problem
Hello
I tried to flash android 9 on my P20 PRO and after the reboot the phone enetered emui recovery for verification and i got the error verification fail and phone turned off.
Now if i wanna try power on the phone nothing happens. But the phone is on cuz i hook it on pc and the HIsuite starts , also on fast boot i can sent reboot command and the phone reboots but the display is black .....
Is there a way i can flash a new system via fastreboot or adb ?? Any help is appreciate..
Thanks alot
eRecovery
The recovery sitting in the "recovery" partition. eRecovery is Huawei's recovery that is able to fix your phone by downloading the latest OTA update via WiFi if you got stuck in a boot loop for several reasons.
To boot into eRecovery:
Power down your phone (if you are stuck in a boot loop simply continue with the next step).
Hold volume up until you end up in eRecovery.
Setup your WiFi access and let it recover your phone.
If unsure, "wipe data/factory reset" to get rid of any leftovers you messed up.
Reboot and be happy that you have not fully bricked your phone.
i cant enter in erecovery ....i have no image on display i tried press power+ volum up and nothing...the phone is on but is black screen .
now the led is blinking red battery empty i think
did you have an unlocked bootloader?
if thats right, you can use this guide to recover.
XDA - Recover
I recovered my phone 2 or 3 times following that guide.
aragarm said:
Hello
I tried to flash android 9 on my P20 PRO and after the reboot the phone enetered emui recovery for verification and i got the error verification fail and phone turned off.
Now if i wanna try power on the phone nothing happens. But the phone is on cuz i hook it on pc and the HIsuite starts , also on fast boot i can sent reboot command and the phone reboots but the display is black .....
Is there a way i can flash a new system via fastreboot or adb ?? Any help is appreciate..
Thanks alot
Click to expand...
Click to collapse
You could try the recovery method in my signature.
Wrote it a while back.