Database Info

Rooting on Micromax funbook pro p500

Hello guys this is my first post on xda
and i have got a rooting tutorial for Micromax FunbookPro P500
ROOTING
Downloads
1) download the Rooting software from the following link
http://www.unlockroot.com/
2) ADB drivers
http://www.mediafire.com/?5l3737h3fb21rmw
HOW TO ROOT
1) Now that you have downloaded the UnlockRoot exe file you will have to install it. It may take some time. Close the application after you have finished installing it.
2) ADB drivers are required to make sure your PC detects the tablet.
First try to install it normally but if it fails follow the method in this tutorial as it is.
Make sure you have enabled USB Debugging on your tab. Go to Settings > Developer Options > Turn On USB Debugging.
Root:
Now finally open the UnlockRoot application. The interface will look like this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now make sure you have:
1) Enabled USB Debugging on your tab. Go to Settings > Developer Options > Turn On USB Debugging.
Connected your tab to PC. DO NOT TURN ON STORAGE
2)Now click the big green ROOT button and let it do its work.
After it has completed, disconnect your tab from PC and restart.
Congratulations!! You have just Rooted your Micromax Funbook Pro (P500) successfully.
HIT Thanks...!! If you like my work

Not sure if that is the correct way to root!!!
There have been earlier attempts using unlock root and it dint work correctly..pls check these posts
http://forum.xda-developers.com/showthread.php?t=1857504
http://forum.xda-developers.com/showthread.php?t=1861589
Pls try installing CWM and see if it works..

Its written they do work!! I have a group on facebook shared this there a month back everyone using it! No problems till now
https://www.facebook.com/groups/funbookpro/

worked for me...
cool.gautam said:
Hello guys this is my first post on xda
and i have got a rooting tutorial for Micromax FunbookPro P500
ROOTING
Downloads
1) download the Rooting software from the following link
http://www.unlockroot.com/
2) ADB drivers
http://www.mediafire.com/?5l3737h3fb21rmw
HOW TO ROOT
1) Now that you have downloaded the UnlockRoot exe file you will have to install it. It may take some time. Close the application after you have finished installing it.
2) ADB drivers are required to make sure your PC detects the tablet.
First try to install it normally but if it fails follow the method in this tutorial as it is.
Make sure you have enabled USB Debugging on your tab. Go to Settings > Developer Options > Turn On USB Debugging.
Root:
Now finally open the UnlockRoot application. The interface will look like this.
Now make sure you have:
1) Enabled USB Debugging on your tab. Go to Settings > Developer Options > Turn On USB Debugging.
Connected your tab to PC. DO NOT TURN ON STORAGE
2)Now click the big green ROOT button and let it do its work.
After it has completed, disconnect your tab from PC and restart.
Congratulations!! You have just Rooted your Micromax Funbook Pro (P500) successfully.
HIT Thanks...!! If you like my work
Click to expand...
Click to collapse
I'm using MI BOOK MI3 tab....and its worked for me like a charm....thanks bro its very useful for root any devices .....

no shell root found
it says "no shell root found". wht shud i do?

cool.gautam said:
Now make sure you have:
1) Enabled USB Debugging on your tab. Go to Settings > Developer Options > Turn On USB Debugging.
Connected your tab to PC. DO NOT TURN ON STORAGE
HIT Thanks...!! If you like my work
Click to expand...
Click to collapse
Gautam, please show where to do (or what to do for)
" DO NOT TURN ON STORAGE"
what do you mean by that????
thank you...

infernape145 said:
it says "no shell root found". wht shud i do?
Click to expand...
Click to collapse
+1

After checking USB debugging, just plug ur device to PC with data cable. Tats it. U must see, USB debugging connected in notification.
Sent from my Blade using Tapatalk 2

Celkon A98 Rooting Thread

Install Drivers for your mobile using PDANET
Click to expand...
Click to collapse
Download Pdanet from this link
Double click the file you just downloaded.
Don't connect your device until I say that!
Continue through the installation by pressing next , until a popup appears about drivers
If it asks you to uninstall previously installed drivers do it otherwise it will overwrite them
Now select phone as others as shown and select ok
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A warning appears like this . select install anyway
Now connect your mobile via usb cable and follow the instructions it should install drivers automatically
If the drivers installed correctly your device manager on pc should look like this
If everything went well proceed to rooting
Root Your CELKON A98 with Bin4ry rooting tool
Click to expand...
Click to collapse
Steps for Rooting :
1. Enable USB debugging on your device.
2. Go to Settings-- > Development-- > USB debugging check it.
3. Connect your device using storage mode to PC & Install driver.
4. Change phone connection to Media device.
5. Download bin4ary root tool from here
6. Unzip Bin4ry the root tool.It should contain these files
7. Run RunMe.bat file (Do notn Run as Administrator)
8. A command prompt will appear in green color like this
9. Now enter your choice
1 for normal mode
2 for special mode
X for unrooting
10. Since we are rooting enter your choice as 1
11. Follow the instruction on the cmd and click restore on your phone when prompted
12. Now your Phone should be rooted and you should be able to see Superuser app in your applist
13. If the above method didn't work try selecting choice as 2(special) in step 10
Check whether your phone is rooted
Click to expand...
Click to collapse
1. Download Root Checker app and check whether your phone is rooted
2. If it is rooted it should show status as ROOTED
HIt thanks :good: if you find this tutorial useful
Credits :
Bin4ary for his wonderful Rooting Tool .
Sandeep Kiran for letting me running experiments on his celkon a98 mobile
Click to expand...
Click to collapse
Caution : I am not responsible for any damages done to your phone through this guide . Use at your own will . But this is a tested tutorial on my friend's device . So not to worry much

ZTE N850 Root and Unroot (Gingerbread 2.3.6) No COMMANDS

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ZTE Root Pack:
http://z4cellforums.webs.com/Zte n850 2.3.6 Root.zip
______________________
How to install:
______________________
1) Download and unzip all apps. Place all apps on sd card.
2) Goto Settings/Application
*Check unknown sources
*In Development: Enable USB Debugging
3) Install all Apps onto the device.
4) Run Poot and install and download everything it asks.
5) Click to root.
6) Reboot after done. (There will be a error, No superuser push, ect)
7) Run z4root to check root or to unroot!
ENJOY!!!!
Still working on the recovery.img. Enjoy root though.
SetCpu offers 5 governors!!​

Will this work on ZTE V793 ?

You can try.
Mainly poot allowed the root and superusers lets you give permission.
Im hoping this will allow roms to start being build and a chance of unlocking the nvm folder.

andynroid said:
Will this work on ZTE V793 ?
Click to expand...
Click to collapse
Did it work?

Cjen1987 said:
Did it work?
Click to expand...
Click to collapse
Nope it does not..the only way I heard is voa MTK Droid Tool and FlashTool....using a PC but due to my work nature I don't have a PC and looking for a one click solution :laugh:

Recovery Image
Hey everyone I'm smartmanvartan... you can usually find me on AF. The N850 has just been released here in Canada with ICS! I don't want to buy this phone per-say but I have a N860 and they are very similar. this could help us Warp users finally get ICS and the same goes for you Fury users. Now I have a friend at Public Mobile(the carrier releasing the N850) that will let me grab a system dump from a new phone but I can't root it or flash recovery. But if someone can pull their stock recovery and post it up, I can make a CWM recovery or at the very least a adb enabled stock recovery and then BOOT into it without flashing it by using the fastboot boot command. Once I have a system dump and or a CWM recovery, I will post it up here as well. Any help would be greatly appreciated.

andynroid said:
Nope it does not..the only way I heard is voa MTK Droid Tool and FlashTool....using a PC but due to my work nature I don't have a PC and looking for a one click solution :laugh:
Click to expand...
Click to collapse
Might want to look into the mobile uncle apk.. its the go to app for china phones and since the v793 seems to be just that it may work for you. it is capable of rooting and flashing recovery... in the other thread for your phone, there is mention of a modified cwm from the zte blade. try getting the image in question and use the mobile uncle tool to flash it. the mobile uncle tool is available on google play...

Hi guys, will this work on a ZTE N850 that runs off Android 4.0.4?? Does it matter?

everytime i press the "press here to poot" the phone freezes
and I have to do a battery pull. any ideas

itsmejson said:
everytime i press the "press here to poot" the phone freezes
and I have to do a battery pull. any ideas
Click to expand...
Click to collapse
Same here... i've been trying on a US model of the N850 and it always freezes.. I've been reading around and I found some people saying that it is ministro version 9.5 and up that doesn't play well with poot.. but even with an older version of the ministro app, i have had no success...

I have a US ZTE N850 that I couldn't root. Tried everything. I gave up on it for a few months, then I guess either poot or Ministro updated themselves. I got a warning from Google Play that poot was dangerous and I should uninstall. So naturally I ignored it and ran it and this time it worked. Ministro II v9.5 if that helps.
I'm still stuck with the gingerbread os, but having superuser makes it a lot
more usable device. If any of you had poot freeze on you before, I suggest you
update Ministro and poot and give it another go.

[CWM-RECOVERY] Huawei Ascend Y320-U30

[ CWM Recovery For Huawei Ascend Y320-U30
Ok so heres a new cwm recovery for huawei ascend y320 there is an other CTR recovery for this phone but CWM as you know is the best recovery
Now this tutorial is very easy to follow and in few seconds youll have your CWM installed.
Requirements:
1.Rooted Huawei Ascend Y320 (If not see this thread)
2.MTK Droid Tools With HUAWEI-Y320-U30_boot_patched_-.img files
Instructions:
1.enable Usb debugging from developers options.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.Connect your device to pc via usb cable and make sure all the drivers are installed (If not GO HERE)
3.Connect the device using USB Cable.Select "Media device" as USB mode.
4.Now open "MTK Droid Tools"
5.Select root backup recovery tab
6.Now check the To Use from Boot option and click Recovery and boot
7.Now Recovery will be installed If any pop up appear click yes and your done.
Now Enjoy CWM Recovery on your Phone Simple and Easy​
Dont forget to hit the thanks button if i helped.:good:

Is the Huawei Ascend Y320-U150 compatible?

Sweet!
You have files for the huawei-y320-U151! However, when I try to run, your software can't detect my phone! I have followed you instructions, and even used the same root tool a week before reading this post(Succesfully rooting). Could you please update your files to be compatible?

I have problem
6.Now check the To Use from Boot option and click Recovery and boot
here is the picture:highfive:

I need help
Device: Huawei ascend y320 u30
I'm using MTK Droid Root & Tools v2.5.2
but it tells me "The device isn't revealed. Connect or reconnect a cable!"
tried so many times but nothing happend...
for your information
Device is rooted.
USB debugging is turned on,
I run the application as an Admin
successfully installed the driver using AdbDriverInstaller
nothing is wrong with the cable too...
Any ideas?

Help
I've seen one or two threads that were in the same vein as this, but no clear resolution. Every time I open SuperSU, I get the message, "The SU binary needs to be updated. Continue?" I select "Continue," and am given the message to install it normally or through TWRP/CWM. If I try through TWRP, the phone restarts into TWRP, but does nothing. If I select "Normal," I get the "Installation failed!" message. I tried uninstalling/reinstalling SuperSU, but that didn't do anything.
In a related problem, I only have root access pretty much immediately after I reboot. Only immediately after I restart the phone can I use apps like WiFi Tether or Titanium.
I'm on stock, rooted 4.2.2. Any help would be great, thanks! :crying:

For problem with su binary updating but end up in failure you must delete set.immutables theres a guide on xda somewhere but you need termanal emulator on your device to remove
Sent from my HUAWEI Y330-U01 using XDA Free mobile app

i need preloader for this phone and their drivers plz
thx

[TUT] How to *ROOT* ZTE Grand S Flex

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I dont know if anyone wrote this but i could not find any instructions on XDA to root ZTE Grand S Flex so im writing it now.
1. First you should download and install ZTE drivers for the phone
http://singledrivers.blogspot.se/2014/01/zte-grand-s-flex-mini-usb-driver-for.html
2. Now download ROOTGENIUS from here
http://www.shuame.com/en/root/
3. Now press menu on the phone then -> Settings/Developer Options/ and enable USB debugging
4. Now connect the phone to the PC and then choose "Only Charging" [Wait for all drivers to install]
5. Now start ROOTGENIUS and you should see connected.
6. Now click on Root IT on ROOTGENIUS and wait for program to finish
7. When the program says DONE then go back to the HOMESCREEN and then go to the app drawer and you will see an app called KINGUSER.
8. Dont delete it or download SuperSu or Superuser because KINGUSER is same as SuperSu and Superuser.
Now you phone is rooted check it with some software from MARKET to verify root.

bihslk said:
​
I dont know if anyone wrote this but i could not find any instructions on XDA to root ZTE Grand S Flex so im writing it now.
1. First you should download and install ZTE drivers for the phone
http://singledrivers.blogspot.se/2014/01/zte-grand-s-flex-mini-usb-driver-for.html
2. Now download ROOTGENIUS from here
http://www.shuame.com/en/root/
3. Now press menu on the phone then -> Settings/Developer Options/ and enable USB debugging
4. Now connect the phone to the PC and then choose "Only Charging" [Wait for all drivers to install]
5. Now start ROOTGENIUS and you should see connected.
6. Now click on Root IT on ROOTGENIUS and wait for program to finish
7. When the program says DONE then go back to the HOMESCREEN and then go to the app drawer and you will see an app called KINGUSER.
8. Dont delete it or download SuperSu or Superuser because KINGUSER is same as SuperSu and Superuser.
Now you phone is rooted check it with some software from MARKET to verify root.
Click to expand...
Click to collapse
I receive ZTE Grand S Flex and try.
Are there any rom kitkat ZTE Grand S Flex?
thank you

mohican22 said:
I receive ZTE Grand S Flex and try.
Are there any rom kitkat ZTE Grand S Flex?
thank you
Click to expand...
Click to collapse
No there is no custom roms and no custom recovery for this phone only root

can someone share if you have flasher tool for this model and firmware?
Thanks in Advance