Touch not working after flash with sp tool ???? - Micromax A110

Touch is not working of my can vas 2 after flashing with sp tools . I flash it with sp tool becoz i lost both recovery stock and as well as cwm and aftrr flashing when i turn on my phone the touch doesnt work ....
Plzzz some help !!!!!!!!!
Sent from my öptïmü$ powerd by
!¡! IZS ¡!¡

Related

[q] need help please

Hello guys... I have a rooted samsung galaxy s4 clone gt-i9500 mt6572 with CWM recovery... Today I did a factory data reset to it and suddenly it was stuck in boot animation ... I have a back up for my rom ( mtk droid tools back up ) and i tried to re-flash it using SP FLASH TOOL but an error keeps appearing (( SP FLASH TOOL ERROR 8038 )) ... What should I do ?? Is it bricked ??
Please help me.
P.S : I can't get into recovery mode.
Thanks in advance.

[Q] sp flash tools not detecting my Canvas Knight A350

i'm trying to flash it with sp flash tools(latest version),but during process of removing cable and inserting it back sp flash tools does not detect my phone but the computer does as there is a pop sound, now my mobile is not booting (corrupted)almost dead.please help me
herobuzz said:
i'm trying to flash it with sp flash tools(latest version),but during process of removing cable and inserting it back sp flash tools does not detect my phone but the computer does as there is a pop sound, now my mobile is not booting (corrupted)almost dead.please help me
Click to expand...
Click to collapse
Maybe the driver problem .
But now , its time to take a round in service center . They will repair your phone you got hard bricked .
That's why i hate sp tools . But for the future don't use it to flash stock roms . Just backup it with custom recoveries and restore whenever you want.

I am unable to go in recovery mode.

I had tried to use Mobileuncle tool for custom recovery with the help philz img but after doing this now I am unable to go in recovery mode, when I m trying to go it's rebooting again n again, but able to enter in factory mode, plz help(for rooting the phone I am using Kingroot):crying:
(Using lollipop 5.0)
Plz help guys....
Gyandeepg44 said:
I had tried to use Mobileuncle tool for custom recovery with the help philz img but after doing this now I am unable to go in recovery mode, when I m trying to go it's rebooting again n again, but able to enter in factory mode, plz help(for rooting the phone I am using Kingroot):crying:
(Using lollipop 5.0)
Plz help guys....
Click to expand...
Click to collapse
try to flash stock kitkat or lollipop rom sp flash tool
Sent from my Nexus 7
adeelraj said:
try to flash stock kitkat or lollipop rom sp flash tool
Sent from my Nexus 7
Click to expand...
Click to collapse
Actually I am not aware that how to flash so can you plz step by step.
this link has complete step by step guide
a bit lenghthy but works 100%
http://forums.androidcentral.com/go...1477-guide-nexus-7-factory-image-restore.html
Sent from my N901C using Tapatalk 2
guys I have micromax unite2 a106 phone. I also tryd to flash philz in it by mobile uncle tools with the help of a thread on xda.
But now when I reboot into recovery, it only shows logo for sometimes and then blank screen.
I think that philz rec was made fir its kitkat version but now it is lollipop updated.
But my recovery is lost.
How to bring it back.....???????? Without pc it will be better.
Same problem is occurring, guys plz help.....
Rustamveer said:
guys I have micromax unite2 a106 phone. I also tryd to flash philz in it by mobile uncle tools with the help of a thread on xda.
But now when I reboot into recovery, it only shows logo for sometimes and then blank screen.
I think that philz rec was made fir its kitkat version but now it is lollipop updated.
But my recovery is lost.
How to bring it back.....???????? Without pc it will be better.
Click to expand...
Click to collapse
flash stock rom via sp flashtool then install recovery again
Gyandeepg44 said:
Same problem is occurring, guys plz help.....
Click to expand...
Click to collapse
Sent from my N901C using Tapatalk 2
Micromachining A106
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me

can't get into recovery mode in mmx A106

Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
To best assist you with your issue, I'm going to move this thread to your device's Q&A section.
You should receive expert advice there.
Good luck!
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Okay so you are unable to boot your device in recovery mode. You can download stock recovery or any custom recovery for your device and then again flash it using flashify. Hope it will work. If its not working let me know by replying. :good:
Flashify is unable to flash stock n custom recovery in my mmx a106. I tried it but i got same issue as amlesh
Whats you need to do is to install sp flash tool on your pc and the stock rom for your mmx unite 2 lollipop .then install sp flash tool and and execute the program ...then there will be a command 'Scatter file' ....click on that and open that in fhe Firmware folder of your Stock Rom ....the connect ur device using usb cable and then click download in the sp flash tool......after completing that disconnect ur devices and reboot it....
Wrong Choice!
Flashify and Twrp are both bad for Unite 2!
You would have flashed the Philz Recovery with SP FLash tool and then flashed the TWRP recovery using it!
Now Still you can do the same
Just google philz recovery and you will get a detailed answer there!
If you like this hit THANKS
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Your phone appears to have gone into a bootloop.
Here is what you can do as you can't get into the system and reboot into recovery mode. Just confirm if you are doing it the correct way.
To enter Recovery mode - turn phone completely OFF.
Recovery = Vol Down + Power (hold both down for several seconds)
This button press procedure varies with each device/model of phone.
Click to expand...
Click to collapse
If the above steps failed, proceed down below.
Things you will need:
1) USB to PC connecting cable
2) A PC where you can download one of the tools to recover (MTKDroid/SpFlash along with the device specific Scatter file)
3) USB drivers installed on your PC to connect with your phone
4) Patience to read references and follow the steps to flash recovery using Tool
CAUTION: Do steps at your own risk. Do not hesitate to ask if not sure. Post restoring recovery successfully, if you plan to flash a Custom ROM, suggest taking a backup from device using TWRP OR atleast the NVRAM using MTKDroid Tool so that you do not run into issues resulting with SIM showing No Network/Service.
Click to expand...
Click to collapse
References: (Some of the community folks have done the hard work to publish these)
SP FLASH TOOL Tutorial to install TWRP / Custom Recovery
https://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
Installing custom recovery using SP Flash Tool(COMPLETE TUTORIAL)
https://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]
https://forum.xda-developers.com/showthread.php?t=2730031
[HOW TO]Guideline / Install MTK drivers / How to Root / Flash a Rom / IMEI Restore
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
Ensure to have the latest versions of TWRP and the flash tools MTKDroid AND/OR SPFlash.
To let you know, I've used the recoveries viz. CTR, TWRP, CWM, Philz on MMX a106 and haven't experienced any issues at all. Neither have I had any issues with Flashify as reported by some. Anyways its a personal experience
NOTE: If the issue is already resolved by now, please help others know it with your fix.
Click to expand...
Click to collapse
Hope this helps, happy restoring
Finally, Thank if you feel helped.

karbonn sparkle v phone dead after flashing with sp tool

my phone was stuck in bootloop . so i flashed it with the lollipop rom using sp flash tool. Evrything wnet right but when i tried to switch onn my phone, it wont. i tried to again flash it with kitkat rom . after flashin g ,again same problem . my phone is hard bricked . but its getting detected by sp flash tool. :crying:
plz help me what to do .. :crying:
thanks in advance

Categories

Resources