Need some help, soft bricked - Verizon Samsung Galaxy S III

I now have a yellow triangle followed by "System software not authorized by verison wireless has been found on your phone. Please turn off and go to the nearest VW store for help." Ya right!
I used this page "http://forum.xda-developers.com/showthread.php?t=2046439" to root a couple days. This morning I tried to install The liquidsmooth rom using The TWRP method.
I did a back up of the orignal, the wiped, and installed. rebooted to the triangle screen.
I've been searching for a couple hrs, there is an amazing amount of deving going on here and I'm not sure which post is the best to follow and fix this.
So I need a little help, or pointed to the right post to help myself.
Thank friends!

Sounds like you didnt unlock your bootloader .... just flash any stock ota update software ics/jb and then unlock your bootloader before attempting anything else
Try this ... odin it back to stock http://forum.xda-developers.com/showthread.php?t=1974114
Or this one same thing ... someone else posted this in a forum before figured id pass it along as well http://forum.xda-developers.com/showthread.php?t=2046439

Thanks again! I believe I have her running again. Gonna try reflashing the liquid rom in a few.

Related

[Q] NS4G root for ginger bread on jelly bean help

i would like to preface this by acknowledging that this was a serious mess up on my part. i tried to root my sprint nexus s 4g the other night. I used a guide on nexusshacks dot com due to its simplicity and detailed instruction.i did all necessary steps but the first time i tried to boot into clockwork recovery i got a dead android and a red triangle error message. my phone restarted a few minutes later and i was able to fix that problem (or so i thought) and boot into recovery. i applied the correct zips and such that came in the download and i went off to sleep. the next day i tried accessing super user and realized it didn't work. i went back to that guide and noticed that its was for ginger bread and there was a new guide linked at the top for ICS . this is were i need assistance. is it enough to just do a hard factory reset and start over or is there more to it than that. also, will such a guide work on jelly bean or should i find another guide. i only use that site for the fact it has a well done step by step tutorial and all needed files compiled into one download. i am aware this site is much better for such things, but i'm, new here so i felt a tad intimidated. anyway, any help is appreciated, i already looked for similar problems but no one else made the dumbass mistake.
(i cant post links because this is my first post, so i apologies for the inconvenience)

[Q] Help - I bricked my phone with latest VZW update

Ok, I have a phone that I purchased used. When my S3 got the Jellybean update in December, I found out it had Clockwork Recovery Mod installed on it. It scared the hell out of me, but I went ahead with the update and it was fine. I am a complete newb to rooting and would never root my phone (I lack the skills). When the update went through in December, I was relieved. For more details on all that, see this thread: http://forum.xda-developers.com/showthread.php?t=2048805
Today's update was a different story. This update appears to have broken my phone.This time, it won't even boot up. It just say "System software not authorized by Verizon Wireless has been found on your phone and go to the nearest Verizon Wireless Store for help." Any suggestions on how to fix this? Am I completely screwed? I have almost no knowledge of rooting, ODIN, etc.
R: [Q] Help - I bricked my phone with latest VZW update
It's not bricked.. you should be able to get in download mode and flash a stock firmware with Odin..
edit: I'll link you the url's to the howto's as soon as I get to my pc
Sent from my GT-I9300 using xda premium
zeroblu3 said:
It's not bricked.. you should be able to get in download mode and flash a stock firmware with Odin..
edit: I'll link you the url's to the howto's as soon as I get to my pc
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
The weirdest thing just happened. Ok, I put in ODIN mode and pressed cancel. Then like 3 minutes later, it just started up all on its own. The update failed of course but the phone is working again. Weird. Was able to turn it off and restart.
I think I may trade this phone back into the same folks who sold it to me. I am clearly not cut out for this.
i'm glad the problem solved by itself
anyway if you still want to attempt to reset the phone to stock here is everything you should need to know :
http://forum.xda-developers.com/showthread.php?t=1762709 (take a look at section 5)
it's really not as hard as it looks...just be aware there is always a chance that something could go wrong....just take your time, read, and only go ahead if you are fully confident and willing to accept the risks...
let us know how it went and don't hesitate to ask for help if you are still in doubt after reading the forum
I hate how I am average Joe with my root knowledge and I could fix your phone without thinking twice.
It surprises me you have an xda account and can not even root and unlock boot loader.
You ask for help then say. Never mind.
Haha whatever works for you at the end of the day.
Sent from club Clean Rom

Installed New update, soft brick. Need an official signed rom

Anyone know of, or or have a link to a factory rom (hell any rom would do at this point) that I would be able to flash with the stock S3 recovery? Just trying to unbrick my phone. Story of what happened below:
I'm running stock 4.1.1 rooted touchwiz. I wake up this morning to a notification saying I had an update on my phone. Should have definitely waited but without thinking I went ahead and updated, which of course soft bricks? The phone. (boots up, and but hangs at the 4Glte, flash screen)normally this would be an easy fix, I could Odin back to stock or something but I'm down in Mississippi till Monday for training and do not have access to my pc.
I can access the factory recovery on the phone but that's it, have no clue where CWM is. I've tried flashing some backups but the factory recovery says that it's not a signed package or whatever. Anyone have any idea how I can get this sucker booted up and running using just an android tablet?
What about reflashing CWM so I can access my backups? Could I somehow flash CWM with factory recovery?:
Dr. Light said:
Anyone know of, or or have a link to a factory rom (hell any rom would do at this point) that I would be able to flash with the stock S3 recovery? Just trying to unbrick my phone. Story of what happened below:
I'm running stock 4.1.1 rooted touchwiz. I wake up this morning to a notification saying I had an update on my phone. Should have definitely waited but without thinking I went ahead and updated, which of course soft bricks? The phone. (boots up, and but hangs at the 4Glte, flash screen)normally this would be an easy fix, I could Odin back to stock or something but I'm down in Mississippi till Monday for training and do not have access to my pc.
I can access the factory recovery on the phone but that's it, have no clue where CWM is. I've tried flashing some backups but the factory recovery says that it's not a signed package or whatever. Anyone have any idea how I can get this sucker booted up and running using just an android tablet?
What about reflashing CWM so I can access my backups? Could I somehow flash CWM with factory recovery?:
Click to expand...
Click to collapse
first of all you can't flash anything on a stock recovery hence the need of a custom recovery. Second you don't accept the OTA when rooted as it can cause the exact issue that you have. Last there isn't a way to fix your problem via another android device that I know of.
U are going to need a pc and then u will need to download Odin http://forum.xda-developers.com/attachment.php?attachmentid=1165122&d=1340993443 and u can get the official software from here on XDA http://hotfile.com/dl/182822657/9f6...WBLK3_381038_REV09_user_low_ship.tar.md5.html this is the 4.1.1 software. Here is a link to some official pre rooted software http://forum.xda-developers.com/showthread.php?t=1984436 all of these software's you can install though Odin just look up here on XDA on how to use Odin and you will be fine once your phone is up and running again then you will need to get you a custom recovery. Then you can access your backups.
Always_Jonezen said:
U will need to download Odin http://forum.xda-developers.com/attachment.php?attachmentid=1165122&d=1340993443 and u can get the official software from here on XDA http://hotfile.com/dl/182822657/9f6...WBLK3_381038_REV09_user_low_ship.tar.md5.html this is the 4.1.1 software. Here is a link to some official pre rooted software http://forum.xda-developers.com/showthread.php?t=1984436 all of these software's you can install though Odin just look up here on XDA on how to use Odin and you will be fine once your phone is up and running again then you will need to get you a custom recovery.
Click to expand...
Click to collapse
He doesn't have access to his PC PLUS he already knows what to do on that end.
jmxc23 said:
He doesn't have access to his PC PLUS he already knows what to do on that end.
Click to expand...
Click to collapse
Just trying to help out but of course someone always has to criticize. I don't see you giving him any advice.
Thanks for all of advice guys. I'll prob just wait it out till Monday. Thanks again.
Always_Jonezen said:
Just trying to help out but of course someone always has to criticize. I don't see you giving him any advice.
Click to expand...
Click to collapse
He was asking if he can use an android tablet to fix his phone. He doesn't have access to PC at least until Monday it says so in his post. I wasn't even criticizing you at all. Unless he knows someone with a PC in Mississippi or someone here knows how to use one android device to flash something on another android device he sadly will have to wait until he gets home to fix his phone. You didn't do anything to be criticized for trying to help all I did was point out the info that you missed without personally attacking you making it a critique.
jmxc23 said:
He was asking if he can use an android tablet to fix his phone. He doesn't have access to PC at least until Monday it says so in his post. I wasn't even criticizing you at all. Unless he knows someone with a PC in Mississippi or someone here knows how to use one android device to flash something on another android device he sadly will have to wait until he gets home to fix his phone. You didn't do anything to be criticized for trying to help all I did was point out the info that you missed without personally attacking you making it a critique.
Click to expand...
Click to collapse
hey all, I've been reading , downloading etc for hours trying to get back into my GS3.. i was as usual roaming around and saw a post that said something to this effect "do ya need to get back to stock?" and figured yes i need to so i jumped in with both feet ..i had my boot loader unlocked and for some reason locked the darned thing remembering it was locked before i rooted and then i get the screen that says ie: "System software not authorized ~~~~~~~~~~~~" with a yellow triangle over it with an "!" mark in it..
all would have been ok except the line up of the way to do things was kinda outta line.. after i had locked bootloader "which is the way the GS3 came" i thought. at any rate i am now where i said i was and if i can be helped it would be appreciated.. and no repeated.. next time i'll read their whole line up first.. so help me if ya can and i am game right now for about anything ..

Soft brick help

Hey guys, I somehow managed to soft brick my verizon GS3 this afternoon. I just need a little help in getting the thing back up and running and possibly an explanation on were I went wrong. I thought I had unlocked the bootloader and then rooted the phone. I managed to install TWRP 2.5.0.0 and do a backup. Then I installed a custom ROM and got the infamous "Software not authorized" message with the yellow triangle.
1st, is it possible to get this far with the bootloader still being locked??
2nd, If I understand correctly, I need to use ODIN to go back to stock and start over. Correct? Or is there another way to salvage this situation. If I have to go back to stock, can someone point me to the latest files? I've found links to a lot of different ones and I don't want to make a bad situation worse. BTW, I can't get into recovery but I can get into ODIN mode.
Any help is greatly appreciated!!
Ok, using ODIN, I was able to get a stock ROM onto the phone and get the thing booted. So essentially I'm back to square 1 and I still didn't figure out what I did wrong the first time around. Bummer Eh?
scheirere said:
Ok, using ODIN, I was able to get a stock ROM onto the phone and get the thing booted. So essentially I'm back to square 1 and I still didn't figure out what I did wrong the first time around. Bummer Eh?
Click to expand...
Click to collapse
Yea, I soft bricked once and was able to boot into recovery by holding volume up, power, and home at the same time while the phone was off. I thanked my lucky stars I had a nandroid backup. I would make sure you unlocked the boot loader properly. When I first started rooting YouTube was great for instructions. I would post a link to a YouTube video but it won't allow me until I have ten posts, I swear some of these rules are retarded. Anyway search in YouTube having visual and audio guide helps a lot. good luck!

Firmware encountered a problem.......

Ok, so there was a thread on here for this issue, but it has been dead for 5 years so I hope it's ok I open this new thread.
I have been given a Samsung Tab 2 GT-P5110 by a colleague of mine. At some point in time he managed to corrupt the firmware to get the black screen of death 'firmware has encountered a problem.......'. This will not have been from flashing ROMs or attempting to root the device (he's an elderly guy, who recently asked me for help resetting his Google passwords, so rooting is well beyond his expertise). I first thought this won't be an issue, I'll hook it up to Odin, flash a recovery, stick it in download mode and then flash a new ROM...... However this failed, Odin confirming the process was unsuccessful. I understand this may be because the corruption is seated deeper than just the level of flashing a new ROM and have read flashing a new kernel may go deep enough to make progress, however, I have only ever used Odin for flashing ROMs so this is all new to me.
I would be very appreciative if someone was able to point me in the right direction, I have found some kernels to download which I think would be compatible, but I'm a little foggy on the steps I should take. Alternatively, someone may know another route to go down, I am also not afraid to open this little guy up and do some DIY surgery if needs be, after all I didn't buy the thing so I have nothing to lose.
Any suggestions would be great and if you want some more info please feel free to ask.
Thanks in advance.
elboobio said:
Ok, so there was a thread on here for this issue, but it has been dead for 5 years so I hope it's ok I open this new thread.
I have been given a Samsung Tab 2 GT-P5110 by a colleague of mine. At some point in time he managed to corrupt the firmware to get the black screen of death 'firmware has encountered a problem.......'. This will not have been from flashing ROMs or attempting to root the device (he's an elderly guy, who recently asked me for help resetting his Google passwords, so rooting is well beyond his expertise). I first thought this won't be an issue, I'll hook it up to Odin, flash a recovery, stick it in download mode and then flash a new ROM...... However this failed, Odin confirming the process was unsuccessful. I understand this may be because the corruption is seated deeper than just the level of flashing a new ROM and have read flashing a new kernel may go deep enough to make progress, however, I have only ever used Odin for flashing ROMs so this is all new to me.
I would be very appreciative if someone was able to point me in the right direction, I have found some kernels to download which I think would be compatible, but I'm a little foggy on the steps I should take. Alternatively, someone may know another route to go down, I am also not afraid to open this little guy up and do some DIY surgery if needs be, after all I didn't buy the thing so I have nothing to lose.
Any suggestions would be great and if you want some more info please feel free to ask.
Thanks in advance.
Click to expand...
Click to collapse
flash a custom recovery, and install this, https://builds.unlegacy-android.org/aosp-4.4/espresso/ua_espresso-4.4.4-20171105172717.zip
Thanks for the reply. I have attempted to flash a recovery, however every one I've tried fails and tells me 'NAND write failed'. I tried the TWRP recovery and philztouch. You don't have a link to a recovery you think might work? I'm pretty sure I've been using recoveries that should work, but you never know.

Categories

Resources