A small rooting dilema - General Questions and Answers

Hello everyone, I'm completely new to androids and I recently rooted my phone with CF's Auto Root.
I've been scouring the forum for information on how to resolve my problem but none that really help me with my specific problem
I want to re root with clockwork but can't find anything on it
Can someone help me out here? Sorry for sounding really dumb, I just switched over from apple this stuff is a completely different world to me

Completly factory reset your phone n try rooting again . If it fails, you need to root using the same software as you did earlier
Sent from my HTC One S using xda app-developers app

sishirbaid said:
Completly factory reset your phone n try rooting again . If it fails, you need to root using the same software as you did earlier
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
So with my original method I've rerooted my phone. How do I install clockwork mod on a rooted phone if it wasn't installed in the rooting process?

Take a look at the "goo manager " app and TWRP instead of CWM.
But CWM also has an easy install app if your phone is supported. Just see if it is or not and go from there either way.
Sent from my SGH-T999 using xda app-developers app

Pennycake said:
Take a look at the "goo manager " app and TWRP instead of CWM.
But CWM also has an easy install app if your phone is supported. Just see if it is or not and go from there either way.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Thanks for answering Pennycake.
I'm on Rogers Carrier OEM firmware right now and I'd like to flash the international firmware as to rid bloatware to my Note 2.
Which app would you recommend me to backup my rom with?

I've successfully rerooted, I found the problem with my phone. After it had been unrooted it needed to be rebooted in order for some effects to take change. So through the original method of CF-Auto Root, I rerooted my phone. I've installed the standalone ClockWorkMod app but it doesn't seem to make back ups properly. Through the app I hit back up and it shows the time stamp I hit 'ok' and my phone shuts off and starts up in recovery mode only not in ClockWorkMod but Android system recovery <e3> or something along those lines with only options to: reboot, install updates from adb, wipe data, etc.
What am I doing wrong?

Try installing the recovert img using clockworkmod before backups, because its not an app error, it is a user error. Using chainfires root method means no cwm. Using odin or lemme guess, you have a gs3, unified tool kit you get cwm.
Sent from my SGH-T999 using xda app-developers app

What recovery do you have right now? If it's twrp (team win) do that go with clockwork mod. Twrp (goo manager) is by far (in my opinion) the best and user friendly. But it's your call. And you don't have to un root and re root to do it. You just have to flash the new recovery via bootloader and it will work. For rom choices I personally like jedi xpx and jellybam. With jedi xpx you can overclock the sh*t out of your note 2 to 1920 and it's still stable.
I've used many recoveries and twrp is my choice hands down. And yiu make back ups easier. So dont unroot again and re root. Just download the latest twrp and flash through bootloader. but to each their own
Sent from my SGH-I317 using xda app-developers app

iKoolkid said:
Try installing the recovert img using clockworkmod before backups, because its not an app error, it is a user error. Using chainfires root method means no cwm. Using odin or lemme guess, you have a gs3, unified tool kit you get cwm.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I'm on the Galaxy Note 2 i317m in Canada. Clockworkmod isn't letting me back up, everytime I get the box with the timestamp to create a back up I hit 'ok', my phone reboots into recovery mode and its the stock recovery, so no option to restore. Also when my phone's model isn't listed in the clockworkmod flashing menu within the app. Is my phone not supported? The N7100 is the one listed when it asks you do confirm a phone model.
markbencze said:
What recovery do you have right now? If it's twrp (team win) do that go with clockwork mod. Twrp (goo manager) is by far (in my opinion) the best and user friendly. But it's your call. And you don't have to un root and re root to do it. You just have to flash the new recovery via bootloader and it will work. For rom choices I personally like jedi xpx and jellybam. With jedi xpx you can overclock the sh*t out of your note 2 to 1920 and it's still stable.
I've used many recoveries and twrp is my choice hands down. And yiu make back ups easier. So dont unroot again and re root. Just download the latest twrp and flash through bootloader. but to each their own
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
When I boot into recovery it says is Android System Recovery <3e> and below are listed a few options, reboot, wipe cache, install from adb, etc

Then you dont have twrp installed. And by the sound of it you dont have cwm either
Sent from my SGH-I317 using xda app-developers app
---------- Post added at 10:32 AM ---------- Previous post was at 10:31 AM ----------
What ohone do you have?
Sent from my SGH-I317 using xda app-developers app

Related

Cant make a nandroid in recovery

Yesterday I rooted my 8013 note with UEALGB software and tried to make a nandroid in high on android cwm. It would reboot recovery everytime i started the backup process. So i flashed TWRP through goo manager app then tried to make a nandroid and the same thing would happen. Any suggestions would be GREATLY appreciated.
Edit: I just tried to flash the stock recovery and it seems like I am stuck with cwm or twrp. I flashed stock recovery through Odin and it said it was successful but when I reboot into recovery I still have custom recovery.
Edit: Seems to only happen when I try to backup the system partition.
Sent from my GT-N8013 using xda premium
Bump
Sent from my EVO using xda premium
I get the same problem, my device will reboot about a third of the way through the backup on both cwm and twrp.
Sent from my GT-N8013 using xda app-developers app
Glad I am not the only one
Sent from my GT-N8013 using xda premium
Bump
Sent from my EVO using xda premium
What method did you use to root your Note 10.1?
darksabre_x said:
What method did you use to root your Note 10.1?
Click to expand...
Click to collapse
Zeodmaxs root without recovery first then I went back and flashed high on android cwm through Odin later in the night because I wanted to start playing around with stuff.
Sent from my EVO using xda premium
The root injected image causes problems. I think you're gonna have to ODIN the original image back on it to fix it. Search around, it's here somewhere.
Go for method #2 next time. Roots without an issue.
Did you flash the the Superuser.zip file after flashing Zedomaxs cwm.tar fie in odin? This is needed to get true root priveleges.
Not sure why you can't reflash a stock rom though, that's how I've always gotten rid of root access to revert back to stock...
ultramag69 said:
Did you flash the the Superuser.zip file after flashing Zedomaxs cwm.tar fie in odin? This is needed to get true root priveleges.
Not sure why you can't reflash a stock rom though, that's how I've always gotten rid of root access to revert back to stock...
Click to expand...
Click to collapse
I didn't flash the superuser.zip. I have root while in android though. I will try to flash it and see if that helps.
Sent from my EVO using xda premium
Flashed super user zip and its still a no go, still rebooting when trying to make a nandroid
Sent from my EVO using xda premium

[Q] Q: Can not flash any roms on 4.0.4

I rooted my friends tablet gt-p5113 with 4.0.4. I used a different work around method to get the root to stick. I got clock work on but I can't seem to flash any roms on his tablet. I tried using 3 different roms already and I keep getting the same message with Andy on his back and his front door open with a red triangle saying can not open package or some thing along those lines. Any ideas?
I think flash stock firmware from for example www.samfirmware.com then begin again from the beginning !!!
When use a root file next time via odin untick auto reboot then reboot manual vol up+power then if question as fix recovery say yes
Sent from my GT-I9300 using xda app-developers app
Mohamedselim said:
I think flash stock firmware from for example www.samfirmware.com then begin again from the beginning !!!
When use a root file next time via odin untick auto reboot then reboot manual vol up+power then if question as fix recovery say yes
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I'm kind of at loss. Would that mean that I would have to down grade to the 4.0.3. firmware?
The Tablet is already rooted. Using the method that you listed and using the latest clockwork mod file.
So may be try flashing another version of cwm as 6.0.1.0 or 6.0.1.2 or so via odin for example and make sure you are flashing right firmwares for your device specific model number
Make sure you have a proper root via app like root check basic and install supersu from market
Put the firmware in both internal and external sd and try flashing from both, may be one of them will work
Sent from my GT-I9300 using xda app-developers app
I did install su. That's how I know I rooted it right. I'll try reflashing an updated firmware. Thanks for the help
Sent from my SPH-L710 using xda app-developers app
Providing more info can get you better results, like rom /link, cwm version, procedures, this way others can help you diagnose your problem. A screen shot of"about tablet" is also very helpful.
Pp.
Sent from my ginger infused Mayan calculator.
Have you try to flash it using heimdall http://forum.xda-developers.com/showthread.php?t=1892735

[Q] Rooted my verizon s3 with instructions on this forum and now I'm am stuck

Everything was fine with the root however I used a font app installer that got the phone stuck in a boot loop (on the rainbow screen). How do I get back to rooted JB?
Did you do a back up of your original rom? You need to get back into recovery...
Sent from my SCH-I535 using xda app-developers app
No I didn't. I didn't see that in the instructions or I missed it. Any thoughts on how to get back to rooted JB?
Well if the font app got you into the boot loop then I don't think you lost root, I would get back into recovery wipe cache and hit reboot... See if that works... Good luck
Sent from my SCH-I535 using xda app-developers app
Unfortunately, I tried that. I think I did an accidental factory reset too but nothing has brought it back from the boot rainbow screen.
Did you unlock using EZ Unlock v1.2? You only mentioned that you rooted.
Sent from my SCH-I535 using xda app-developers app
No, I didn't use that. I followed the instructions to root found here (worked no problem until I met that $&#^%#& app) http://forum.xda-developers.com/showthread.php?t=2046439 I think I can reset using Odin I just don't know what to use
Aight, well did you unlock the bootloader? Your response dictates the suggested route to resolve this.
Sent from my SCH-I535 using xda app-developers app
I did follow the instructions to unlock the bootloader
If that's the case then you just need to boot into recovery and flash a rom. If you were running just stock rooted & unlocked VRBLK3, it's easier to just flash a rooted stock rom like the official VRBLK3 leak here: http://forum.xda-developers.com/showthread.php?t=2034118
Try just flashing that, without wiping, then boot into the rom.
or
If you were on a custom rom, just reflash that rom via recovery and you'll be fine. Unfortunately you lose all your settings of you wipe data in recovery so try reflashing either option without wiping if you absolutely need to try recovering whatever data already exists in your current rom. If this doesn't work, format data, wipe cache then flash the rom.
Sent from my SCH-I535 using xda app-developers app
I will give it a shot and let you know. Thanks so much! I was on stock ROM btw.
Cool, this should work
Sent from my SCH-I535 using xda app-developers app
Ok, this is a zip file. Does it have to be on the phone? If so, how do I put it there?
nctiger said:
Ok, this is a zip file. Does it have to be on the phone? If so, how do I put it there?
Click to expand...
Click to collapse
Yes it does need to be there. If you have an sdcard just drag and drop onto it directly then flash in your custom recovery. Conversely, you should be able to boot into recovery and try connecting your phone to the laptop then dragging the zip over.
The longer method will be to Odin flash VRBLK3 and start all over from there.
Sent from my SCH-I535 using xda app-developers app
I am in Clockwork Mod recovery and my comp is not recognizing my phone as it did earlier.
nctiger said:
I am in Clockwork Mod recovery and my comp is not recognizing my phone as it did earlier.
Click to expand...
Click to collapse
I don't use CWM but did you go to Mounts and Storage and select "Mount /sdcard"? Does it connect now?
Sent from my SCH-I535 using xda app-developers app
I went there but it didn't seem to do anything when I selected mount sdcard and conversely didn't connect either
nctiger said:
I went there but it didn't seem to do anything when I selected mount sdcard and conversely didn't connect either
Click to expand...
Click to collapse
Aight well since that failed, you have to do this the long way: Odin flash the VRBLK3 rooted image from your laptop onto your phone. Choose one of the two images for VRBLK3 and follow the directions.
http://forum.xda-developers.com/showthread.php?t=1984436
Edit: I realize I didn't ask but do you have an sd card?
Sent from my SCH-I535 using xda app-developers app
That worked! Thanks so much. Now, what is the best practice for backing things up so that I don't have this problem again? Should I root first then backup? Do I still have to unlock bootloader? Just wanting to handle this properly from this point forward.
It should be rooted already if you installed the Odin files from MrRobinson thread. It should come with either SuperSU or SuperUser correct? You also should still be unlocked but you can re-unlock using EZ Unlock v.1.2 from the following thread and you're undeniably unlocked. You'll hear a brief audio message if it worked.
http://rootzwiki.com/topic/32456-app-920-ez-unlock-14-easiest-way-to-unlock-your-bootloader/
Also, please perform a nandroid back in CWM so you have something stable to return to if something goes awry in the future. That backup would have cut all this down to one simple step. You don't need to be unlocked to perform a nandroid however you do need to be rooted with a custom recovery.
Lastly, perform an IMEI backup using the "Comprehensive IMEI Backup" thread in the dev section. Do this and save the resulting Synergy zip from backup methods A and B in more than one place not on your phone. This is more so a precaution because flashing things in recovery can and may result in a complete loss of connection with Verizon.
Sent from my SCH-I535 using xda app-developers app

fail to flash clock work mod need help

so i went to this thread http://forum.xda-developers.com/showthread.php?t=2046439 to try to root my phone.
after going through the steps clock work recovery is not there im stuck with the default android one,
odin tells me im useing custom binary 2 every thing shows i did the first part correctly.
but yet i dont have the cwr mode when i restart with volume up + home + power
all help is appreciated
james
additional info
just restarted and saw os is at 4.0.4
my end goal is being able to use my galaxy s3 (from usa on verzion networkd) on the doco mo network in japan by useing there sim card
srgjames said:
so i went to this thread http://forum.xda-developers.com/showthread.php?t=2046439 to try to root my phone.
after going through the steps clock work recovery is not there im stuck with the default android one,
odin tells me im useing custom binary 2 every thing shows i did the first part correctly.
but yet i dont have the cwr mode when i restart with volume up + home + power
all help is appreciated
james
Click to expand...
Click to collapse
i am stuck at the same thing. it keeps going to the stock recovery area not cwm
If you achieved root then why not just download ROM manager (play store) and flash CWM through the app or if you want TWRP instead which I recommend the get the goo app from the play store and flash TWRP through that app in the same manner.
Sent from my SCH-I535 using xda app-developers app
WettbackMartyr said:
If you achieved root then why not just download ROM manager (play store) and flash CWM through the app or if you want TWRP instead which I recommend the get the goo app from the play store and flash TWRP through that app in the same manner.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
im doing the phone rebel root method and i done the steps in odin but when i go to install the last step of the root it needs cwm and my s3 will not go into cwm. i even installed cwm twice now
Are you making sure to boot straight into cwm from Odin?
tallgrasshawk said:
Are you making sure to boot straight into cwm from Odin?
Click to expand...
Click to collapse
im sorry not sure i know how to do that one. i flashed the vralec file and the cwm part but once that is down it says to boot into cwm recovery and my s3 wont let m do that part
i have done it before then i soft bricked my phone so im rerooting it and im stuck trying to get the last step installed
WettbackMartyr said:
If you achieved root then why not just download ROM manager (play store) and flash CWM through the app or if you want TWRP instead which I recommend the get the goo app from the play store and flash TWRP through that app in the same manner.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
EZ Recovery works well too...
Sent from my Eclipsed Galaxy SIII
Yes forgot about that one. Thanks! :thumbup:
Sent from my Liquidy SuperNexus using xda-developers app

[REF] List of Custom Recoveries (3-08-14)

Custom Recoveries​
This is the most recent list of recoveries for the SCH-i535 Verizon galaxy S3. I will be keeping this up to date to make it easier to find the most recent recoveries for our device.
Installation
CWM and TWRP are .img files and are easiest to install from EZ Recovery or Flashify apps from the play store.
​EZ-Recovery
​Flashify
Philz is installed by either using odin to flash the .tar.md5 file or by flashing the zip in recovery.
Safestrap is installed through an application.
I don't hold any responsibility of what happens to your phone due to flashing these.
Clockworkmod Recovery
Clockworkmod 6.0.4.3 - 10-21-13
Clockworkmod 6.0.4.5 - 1-1-14
Clockworkmod Touch Recovery
Clockworkmod Touch 6.0.4.3 - 10-21-13
Clockworkmod Touch 6.0.4.5 - 1-1-14
TWRP Recovery
TWRP Recovery 2.6.3.0 - 10-21-13
TWRP Recovery 2.6.3.1 - 11-24-13
TWRP Recovery 2.7.0.0 - 3-08-14
Philz Touch Recovery
Advanced CWM Recovery
Philz Touch Recovery 5 - v. 5.15.0 - CWM 6.0.3.7 - 10-21-13
Philz Touch Recovery 6 - v. 6.15.4 - CWM 6.0.4.7 - 2-13-14
Safestrap Recovery
Only use on VRUCML1 base! Modified TWRP with sdcard partitioning ability for custom roms on locked bootloaders.
Safestrap Recovery - TWRP 2.6.3.1 - 1-10-14
Updating the Update-Binary
If you receive a status 7 error when flashing a zip in recovery, pull the update binary from the latest CM nightly. This should be resolved in Philz Recovery as it automatically works around it, but may throw errors in the latest CWM recovery.
Here's how to replace the file:
Unzip the folder
Navigate to META-INF/com/google/android
Replace the older update-binary with the newer one
rezip
This will allow files to flash on the newer recoveries until all developers update the binary on their own zips, or a fix is in place.
I want to thank @andybones for giving me this idea, and giving me permission to make an updated thread.
I also want to thank all the developers of these great recoveries.
I don't always have time to check and see when these are updated, so if someone could reply to this thread or PM me when there's an update that would be great. I'll provide a link for it and update the thread.
Thank you ever since i flashed an aosp rom and created that stupid 0/ folder i javent been able to flash a new recovery. Stuck on TWRP 2.6.0.0 for months
Sent from my SCH-I535 using Tapatalk
DROID3R said:
Thank you ever since i flashed an aosp rom and created that stupid 0/ folder i javent been able to flash a new recovery. Stuck on TWRP 2.6.0.0 for months
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
I used flashify to upgrade my recovery from TWRP 2.5.0 to 2.6.3 just fine.
Sent from my Verizon Wireless Samsung Galaxy SIII, via Tapatalk.
Flashify works fine, I just recommend ez recovery because the interface is very simple and it's made for flashing recoveries only.
It's also made for this specific phone model only and it flashes recoveries more reliably and without any hiccups that I've seen with other recovery apps. I think it's very well made despite it being over a year old.
Sent from my SCH-I535 using Tapatalk 2
For some reason when I've used ez recovery, it didn't change my recovery version.
Sent from my SCH-I535 using XDA Premium 4 mobile app
InfantryMarc said:
For some reason when I've used ez recovery, it didn't change my recovery version.
Sent from my SCH-I535 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I thought it was me. Mine did the same thing. I don't know if it flashed it or not.
Sent from my Ktoonzified PACmaned SGS3!
Mine says flash successful and to reboot to recovery and when I do, it says recovery version 6.0.3.0
Sent from my SCH-I535 using XDA Premium 4 mobile app
InfantryMarc said:
Mine says flash successful and to reboot to recovery and when I do, it says recovery version 6.0.3.0
Sent from my SCH-I535 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sometimes it does that, I usually flash from my internal card and that fixes the problem, try moving the file and try again.
You can tell it was successful because it takes a second to flash, if it doesn't work the notification flash successful will come up instantaneously.
Sent from my SCH-I535 using Tapatalk 2
It doesn't even show up from the internal SD card when I'm in recovery. I've tried using ez and flashify and both say the same thing but same results. I've even tried downloading it from the website and it won't even download the img file
Sent from my SCH-I535 using XDA Premium 4 mobile app
InfantryMarc said:
It doesn't even show up from the internal SD card when I'm in recovery. I've tried using ez and flashify and both say the same thing but same results. I've even tried downloading it from the website and it won't even download the img file
Sent from my SCH-I535 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Some browsers don't download the file properly, I use Chrome and it works. You should be able to move it to your internal SD card, find it by hitting the ellipses next to custom, and flash it.
If you still can't do it, there's a tar file on their website that you can use to ODIN flash.
Sent from my SCH-I535 using Tapatalk 2
Prolly just do it that way. Will it erase my ROM and all that or will it be safe? Haven't ever reflashed a recovery after being rooted
Sent from my SCH-I535 using XDA Premium 4 mobile app
InfantryMarc said:
Prolly just do it that way. Will it erase my ROM and all that or will it be safe? Haven't ever reflashed a recovery after being rooted
Sent from my SCH-I535 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It won't touch the rom, only the recovery.
Sent from my SCH-I535 using Tapatalk 2
Thanksm had to use Odin to flash the update. Worked like a charm guess I'll have to use that way in the future
Sent from my SCH-I535 using XDA Premium 4 mobile app
Does anybody know of a recovery that will work with a new Verizon GS3? I just got an insurance replacement that is brand new. I can't find a recovery that will mount the internal or external SD card. I was able to root, unlock the bootloader, and install a custom recovery but neither TWRP or CWM will mount the SD cards (or any partitions that I can tell).
It sounds like the guys with the Sprint GS3 have figured it out and I'm wondering if anybody has a modified recovery for the Verizon GS3. Here's the Sprint forum about this issue. http://forum.xda-developers.com/showthread.php?t=2391616
Any help would be appreciated. I miss my CleanRom!
Durangodude said:
Does anybody know of a recovery that will work with a new Verizon GS3? I just got an insurance replacement that is brand new. I can't find a recovery that will mount the internal or external SD card. I was able to root, unlock the bootloader, and install a custom recovery but neither TWRP or CWM will mount the SD cards (or any partitions that I can tell).
It sounds like the guys with the Sprint GS3 have figured it out and I'm wondering if anybody has a modified recovery for the Verizon GS3. Here's the Sprint forum about this issue. http://forum.xda-developers.com/showthread.php?t=2391616
Any help would be appreciated. I miss my CleanRom!
Click to expand...
Click to collapse
both of the recoveries you mentioned will work, but you must ensure its the latest version.
Sent from my SCH-I535 using Tapatalk
Thread updated, new TWRP version.
never had a prob with clockwork mod thusfar.... until tonight actually ha
Durangodude said:
Does anybody know of a recovery that will work with a new Verizon GS3? I just got an insurance replacement that is brand new. I can't find a recovery that will mount the internal or external SD card. I was able to root, unlock the bootloader, and install a custom recovery but neither TWRP or CWM will mount the SD cards (or any partitions that I can tell).
It sounds like the guys with the Sprint GS3 have figured it out and I'm wondering if anybody has a modified recovery for the Verizon GS3. Here's the Sprint forum about this issue. http://forum.xda-developers.com/showthread.php?t=2391616
Any help would be appreciated. I miss my CleanRom!
Click to expand...
Click to collapse
Make sure you are on the newest version. They both work.
Sent from my SCH-I535 using xda app-developers app
Thread updated, official Philz touch recovery is now supported for our device! Give it a try if you like CWM recovery.
I can't flash any roms with Philz recovery. Will edit with more info in a moment.
Sent from my SCH-I535 using XDA Premium 4 mobile app
---------- Post added at 02:07 PM ---------- Previous post was at 01:57 PM ----------
FingersMcGee7 said:
I can't flash any roms with Philz recovery. Always get :
Assert failed: get prop("to. Product. Device")
E: error in /data/media/0/download /pac-d2vzw-nightly-20131228.zip
What's going on here?
Sent from my SCH-I535 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sent from my SCH-I535 using XDA Premium 4 mobile app

Categories

Resources