Database Info

Problem help!!!!!!!!

i cant install no roms every rom i put in stay stuck at boot screen doesnt freeze just hangs on boot what can i do???????:crying::crying::crying:

crimedave1987 said:
i cant install no roms every rom i put in stay stuck at boot screen doesnt freeze just hangs on boot what can i do???????:crying::crying::crying:
Click to expand...
Click to collapse
are you s-on or s-off?

mattlowry said:
are you s-on or s-off?
Click to expand...
Click to collapse
s-on

crimedave1987 said:
i cant install no roms every rom i put in stay stuck at boot screen doesnt freeze just hangs on boot what can i do???????:crying::crying::crying:
Click to expand...
Click to collapse
Need more info. What ROM.....S-on, S-Off......what recovery......you know. As much of a description of what you're working with as you can think of. How are you flashing, what had you done right before this happened if anything, etc., etc......

WeekendsR2Short said:
Need more info. What ROM.....S-on, S-Off......what recovery......you know. As much of a description of what you're working with as you can think of. How are you flashing, what had you done right before this happened if anything, etc., etc......
Click to expand...
Click to collapse
i was trying to install rubix senceless 4.0 , cyanogen mod 9 , bulletproof 1.1 and i have cwm recovery 5.5.0.4 and im just flashing all thru cwm Recovery it will install okay then once i reboot bulletproof rom will hang on the t-mobile mytouch 4g slide other roms like rubix and cyanogen will hang at the boot animation screen prob i did something wrong cause when i wanted to install a new fresh rom i thought formatting everything wont damage the phone but here is what i format
on cwm-based recovery5.5.0.4
wipe data/factory reset - passed but with an error E:format_volume: make_extf4fs failed on /dev/block/mmcblk1p2
wipe cache partition - passed
advanced/wipe dalvik cache wiped - passed
wipe battery stats - passed fix permissions - passed

This is why I have cwm v4.0.0.9
Sent from my myTouch 4G Slide using xda premium

K7Cobb said:
This is why I have cwm v4.0.0.9
Sent from my myTouch 4G Slide using xda premium
Click to expand...
Click to collapse
ok whyy?????
will this recovery fix my problem?

crimedave1987 said:
i cant install no roms every rom i put in stay stuck at boot screen doesnt freeze just hangs on boot what can i do???????:crying::crying::crying:
Click to expand...
Click to collapse
damn this long no response is telling me i damaged my phone

crimedave1987 said:
ok whyy?????
will this recovery fix my problem?
Click to expand...
Click to collapse
Have you by any chance tried out CWM 6.0 and decided to go back to 5.5.0.4? Did you extract the "boot.img" file from the ROM & fastboot flash boot boot.img thru ADB AFTER you flashed your ROM.zip file since you are S-On?
---------- Post added at 08:22 AM ---------- Previous post was at 08:17 AM ----------
K7Cobb said:
This is why I have cwm v4.0.0.9
Sent from my myTouch 4G Slide using xda premium
Click to expand...
Click to collapse
You won't be too happy with 4.0.0.9 if you ever let your phone go COMPLETLY dead. It will brick it.

WeekendsR2Short said:
Have you by any chance tried out CWM 6.0 and decided to go back to 5.5.0.4? Did you extract the "boot.img" file from the ROM & fastboot flash boot boot.img thru ADB AFTER you flashed your ROM.zip file since you are S-On?
---------- Post added at 08:22 AM ---------- Previous post was at 08:17 AM ----------
You won't be too happy with 4.0.0.9 if you ever let your phone go COMPLETLY dead. It will brick it.
Click to expand...
Click to collapse
well im using the aio toolkit by hansoon
and the latest cwm is 5.0.2.7 for mt4gs

crimedave1987 said:
well im using the aio toolkit by hansoon
and the latest cwm is 5.0.2.7 for mt4gs
Click to expand...
Click to collapse
Hasoon's toolkit is for unlocking, installing CWM & superuser if my memory serves me though. You can flash your ROMs thu recovery (CWM) but with S-On you will have to extract the "boot.img" file and flash it seperately thru ADB because HBoot will stop an unsigned file it sees as a Radio from flashing if S-On.
There ARE a couple of other versions of CWM....5.5.0.4 & 6.0.0.0. (6.0 has some REAL issues though and has bricked several phones so IF you notice it....don't USE it.)
This will explain it much better to you...... http://forum.xda-developers.com/showthread.php?t=1508556

is there anything i can do to fix this problem cause i really need the phone
okay just now i flashed cwm ver 5.0.2.7 and before when i had it i had the option (mounts and storage menu)
i formatted the cache/data/sd-ext/system is that what i did wrong?

crimedave1987 said:
is there anything i can do to fix this problem cause i really need the phone
okay just now i flashed cwm ver 5.0.2.7 and before when i had it i had the option (mounts and storage menu)
i formatted the cache/data/sd-ext/system is that what i did wrong?
Click to expand...
Click to collapse
If you flashed your ROM and then the boot image after you did that it shouldn't be a problem. Did you read the post above yours and answer those question though? Did you check the link I provided and understand fully what it was talking about? That is VERY important.

WeekendsR2Short said:
If you flashed your ROM and then the boot image after you did that it shouldn't be a problem. Did you read the post above yours and answer those question though? Did you check the link I provided and understand fully what it was talking about? That is VERY important.
Click to expand...
Click to collapse
can you explain step by step cause its not giving me details
i extracted just the boot.img from the rom put it in a new folder then copied the rom.zip file to the same new folder im not doing the command prompt right? please help sorry im a noob

crimedave1987 said:
can you explain step by step cause its not giving me details
i extracted just the boot.img from the rom put it in a new folder then copied the rom.zip file to the same new folder im not doing the command prompt right? please help sorry im a noob
Click to expand...
Click to collapse
do you have adb and fastboot setup?
http://forum.xda-developers.com/showthread.php?t=928370 - adb and fastboot the easy way

mattlowry said:
do you have adb and fastboot setup?
Click to expand...
Click to collapse
i dont think so

WeekendsR2Short said:
This will explain it much better to you...... http://forum.xda-developers.com/showthread.php?t=1508556
Click to expand...
Click to collapse
this is the step by step instructions
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
crimedave1987 said:
i dont think so
Click to expand...
Click to collapse
if you dont you need to do this ASAP because when you are on you have to fastboot .img files to make it work im not too familiar as i am s-off. follow my first link to set up adb and fastboot then go to the link weekend posted. (which is stickied in the development section).

Move your ROM.zip file to the root directory of your phone first. Then put the boot.img file in the root directory of your computer since it's already in the windows path. that's " C:\ " Since you already have Hasoon's toolkit installed we'll use that instead of putting you thru the ADB installation right now for time & simplicity's sake.
Go to Windows Explorer & navigate to the folder you have his toolkit in and copy the name of the folder down EXACTLY. Then you can pull up your command prompt window again. When it initiates it will say C:\ sumpthin....sumpthin...sumpthin. From there type CD\ and it will "change directory" back to C:\ THEN you can type cd\ "whatever you named the folder that has Hasoon's toolkit in it".
That will take you to that folder just like explorer will do. Just let it sit there for a second.
On your phone in Recovery you wipe user data/ factory reset 3 times then you can....
Wipe cache 3 times and toggle down to "Advanced"
That will take you to another screen where you will see "Dalvik Cache"
Wipe that 3 times as well.
Then hit "Go back" & return to the previous screen & select "install zip from SD card"
Once complete leave your phone sitting & still plugged in to the usb
NOW....go back to your computer and type....
reboot bootloader
fastboot flash boot boot.img
fastboot reboot
Once your phone reboots, leave it alone for 5 minutes to let everything settle in and you should be "good to go".

WeekendsR2Short said:
Move your ROM.zip file to the root directory of your phone first. Then put the boot.img file in the root directory of your computer since it's already in the windows path. that's " C:\ " Since you already have Hasoon's toolkit installed we'll use that instead of putting you thru the ADB installation right now for time & simplicity's sake.
QUOTE]
the method for adb i posted is quick and easy. unzip to c: drive and you are done
Click to expand...
Click to collapse

mattlowry said:
this is the step by step instructions
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
if you dont you need to do this ASAP because when you are on you have to fastboot .img files to make it work im not too familiar as i am s-off. follow my first link to set up adb and fastboot then go to the link weekend posted. (which is stickied in the development section).
Click to expand...
Click to collapse
If we can do it like this the first time it may keep him from going into sensory overload. LMAO!
---------- Post added at 09:48 AM ---------- Previous post was at 09:45 AM ----------
mattlowry said:
WeekendsR2Short said:
Move your ROM.zip file to the root directory of your phone first. Then put the boot.img file in the root directory of your computer since it's already in the windows path. that's " C:\ " Since you already have Hasoon's toolkit installed we'll use that instead of putting you thru the ADB installation right now for time & simplicity's sake.
QUOTE]
the method for adb i posted is quick and easy. unzip to c: drive and you are done
Click to expand...
Click to collapse
You're right. It IS very easy. Either way should work but sometimes my mind doesn't go down the easiest path.
Try Matt's way first CrimeDave......
---------- Post added at 10:10 AM ---------- Previous post was at 09:48 AM ----------
mattlowry said:
WeekendsR2Short said:
Move your ROM.zip file to the root directory of your phone first. Then put the boot.img file in the root directory of your computer since it's already in the windows path. that's " C:\ " Since you already have Hasoon's toolkit installed we'll use that instead of putting you thru the ADB installation right now for time & simplicity's sake.
QUOTE]
the method for adb i posted is quick and easy. unzip to c: drive and you are done
Click to expand...
Click to collapse
Mattlowery....I COMPLETLY forgot about the shortcut tool for setting up ADB!! My bad.
CrimeDave, I defer to Matt's way completly. I just now followed his link. I was trying to get you around something you didn't HAVE to get around in the first place. OH well..... LOL
Sorry if I confused you.....
Click to expand...
Click to collapse
Click to expand...
Click to collapse

[Q] Please help. Stuck at Boot screen

I was on 1.85, but couldn't get it to root no matter how many times I tried. I updated to 2.2 and was able to successfully root and unlock. I decided to install this rom: http://forum.xda-developers.com/showthread.php?t=1804223. I flashed the boot img from the boot loader. After I flashed it, I tried to reboot into recovery from ADB, but it said the device was not connected. So I went ahead and rebooted the device. I got back to the boot loader and booted into recovery from there. At that point, I mounted the sd card and copied over the zip file of the rom and the gapps. I unmounted the phone and installed the rom and gapps and rebooted. Now im stuck on the Initiating swagger screen. It just sits on this screen and looks like its loading, but nothing happens. Any ideas as to what I have done wrong??
Thanks in advance.

Did you full wipe before flashing? Ie system data cache

a box of kittens said:
Did you full wipe before flashing? Ie system data cache
Click to expand...
Click to collapse
Yes. Would the version of the recovery that I am using make a difference?

Welcome to hboot 1.14 and having to fastboot the boot images from now on
Sent from my HTC One XL

I'm a little confused o where you're getting stuck at ? If its just stuck installing in recovery reboot and reflash
---------- Post added at 06:56 AM ---------- Previous post was at 06:55 AM ----------
954wrecker said:
Welcome to hboot 1.14 and having to fastboot the boot images from now on
Sent from my HTC One XL
Click to expand...
Click to collapse
He did flash bootimg

a box of kittens said:
I'm a little confused o where you're getting stuck at ? If its just stuck installing in recovery reboot and reflash
---------- Post added at 06:56 AM ---------- Previous post was at 06:55 AM ----------
He did flash bootimg
Click to expand...
Click to collapse
The rom said it installed fine, the gapps said it installed fine. I rebooted the phone from recovery. The HTC screen came up and now it's stuck on the screen that has a unicorn and rotating gears and says initiating swagger.

What recovery are you on? You flashed the right boot img correct?

I read he flashed it but he probably screwed it up. It's just more to go wrong when adding more steps 1.09 would have been so simple
Sent from my HTC One XL

a box of kittens said:
What recovery are you on? You flashed the right boot img correct?
Click to expand...
Click to collapse
I flashed 2.4.0.0 version of TWRP. Should I try an older version?

954wrecker said:
he probably screwed it up.
Sent from my HTC One XL
Click to expand...
Click to collapse
Most likely

954wrecker said:
I read he flashed it but he probably screwed it up. It's just more to go wrong when adding more steps 1.09 would have been so simple
Sent from my HTC One XL
Click to expand...
Click to collapse
It said that it flashed, but when I went to reboot the phone into recovery, ADB said it was no longer connected.

Monkeydias said:
It said that it flashed, but when I went to reboot the phone into recovery, ADB said it was no longer connected.
Click to expand...
Click to collapse
You flashed it with fastboot right? Not using an adb command

a box of kittens said:
You flashed it with fastboot right? Not using an adb command
Click to expand...
Click to collapse
No. I used ADB. I guess that is the problem. How do I flash with fastboot?

http://forum.xda-developers.com/attachment.php?attachmentid=1179735&d=1344782533
Download that
2. Put the boot img in that folder
3 get your phone into bootloader than scroll down and select fastboot
4 now open a command prompt within the adb fastboot folder and type "fastboot flash boot boot.img" with out the quotes

Ok I think I have completely screwed myself. I wiped the data and now I cannot mount my sd card.

Monkeydias said:
Ok I think I have completely screwed myself. I wiped the data and now I cannot mount my sd card.
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=1942519

How'd you do that?
---------- Post added at 07:35 AM ---------- Previous post was at 07:34 AM ----------
Format sd

exad said:
Try this: http://forum.xda-developers.com/showthread.php?t=1942519
Click to expand...
Click to collapse
Thanks everyone for your help. I found this questions asked before http://forum.xda-developers.com/showthread.php?t=2096912&highlight=cannot+mount+sd+card+in+recovery And followed the instructions on the fourth post and loaded up this rom http://forum.xda-developers.com/showthread.php?t=1868236. Now I am finally up and running. Thank you all very much for being up at this hour and answering my questions!

Np glad you hot everything up and running

Enjoy viperxl it is a great rom
Sent from my HTC One XL

[Q] Im partially bricked

OK, I rooted my phone and everything tonight. It went perfect. Until I tried to flash the ViperX on my device. Now I am in a boot loop. Well I booted into recovery and my sdcard is completly wiped, No operating system what so ever on my phone. I can get to the boot loader screen and that is all. Can I save my phone or do I have to smash it and do a warranty claim? I downloaded the stock ruu and it fails halfway thru the install. It says Error: 155 Ant ideas what I can do?

mcnaught82 said:
OK, I rooted my phone and everything tonight. It went perfect. Until I tried to flash the ViperX on my device. Now I am in a boot loop. Well I booted into recovery and my sdcard is completly wiped, No operating system what so ever on my phone. I can get to the boot loader screen and that is all. Can I save my phone or do I have to smash it and do a warranty claim? I downloaded the stock ruu and it fails halfway thru the install. It says Error: 155 Ant ideas what I can do?
Click to expand...
Click to collapse
You can try downloading a Rom with aroma installer like Scotts Clean Rom. Put zip on phone in download folder and flash with twrp. If you have hboot 1.14 make sure you get the right one so you don't have to flash boot image via gui.
AT&T HTC OneX
Android 4.1.1
ViperXL

Venomtester said:
You can try downloading a Rom with aroma installer like Scotts Clean Rom. Put zip on phone in download folder and flash with twrp. If you have hboot 1.14 make sure you get the right one so you don't have to flash boot image via gui.
AT&T HTC OneX
Android 4.1.1
ViperXL
Click to expand...
Click to collapse
Do you have a link to do this? I can boot up into recovery, but I cant access my phone from my PC. I downloaded a RUU for my phone and it gets half way thru and it crashes. So I need something with a .exe file to install from my computer that will access my phone to install the software

Venomtester said:
You can try downloading a Rom with aroma installer like Scotts Clean Rom. Put zip on phone in download folder and flash with twrp. If you have hboot 1.14 make sure you get the right one so you don't have to flash boot image via gui.
AT&T HTC OneX
Android 4.1.1
ViperXL
Click to expand...
Click to collapse
yes i have hboot 1.14...thats what killed my damn phone!

mcnaught82 said:
Do you have a link to do this? I can boot up into recovery, but I cant access my phone from my PC. I downloaded a RUU for my phone and it gets half way thru and it crashes. So I need something with a .exe file to install from my computer that will access my phone to install the software
Click to expand...
Click to collapse
http://androidcommunity.com/forums/f8/adb-fastboot-for-rookies-18124/
http://www.scottsroms.com/content.p...Performance-and-Stability-are-not-Optional!-★
http://developer.android.com/sdk/dow...ows-1.5_r2.zip
http://android-roms.googlecode.com/f...boot-win32.zip
http://forum.xda-developers.com/atta...6&d=1230965195.
http://forum.xda-developers.com/showthread.php?t=512319
Hope This Helps.
AT&T HTC OneX
Android 4.1.1
ViperXL
---------- Post added at 03:09 AM ---------- Previous post was at 03:07 AM ----------
mcnaught82 said:
yes i have hboot 1.14...thats what killed my damn phone!
Click to expand...
Click to collapse
Yes it will lol.
I have it to.
AT&T HTC OneX
Android 4.1.1
VierXL
---------- Post added at 03:45 AM ---------- Previous post was at 03:09 AM ----------
If you cannot get the computer to recognize the phone then you may have to take a crash course in ABD and Fastboot.
http://www.addictivetips.com/mobile/how-to-flash-a-recovery-to-an-android-device-without-sd-card/
AT&T HTC OneX
Android 4.1.1
ViperXL

My computer can now see my sd card and I can add programs to it. im logged into recovery under TWRP. What do I do now to flash a recovery onto my phone?

mcnaught82 said:
My computer can now see my sd card and I can add programs to it. im logged into recovery under TWRP. What do I do now to flash a recovery onto my phone?
Click to expand...
Click to collapse
Find a rom with aroma installer for hboot 1.14. Download and place zip file in sd downloads. Reboot into recovery and use twrp to flash the zip. Reboot and aroma should start. It will guide you through.
AT&T HTC OneX
Android 4.1.1
ViperXL
---------- Post added at 05:03 AM ---------- Previous post was at 04:25 AM ----------
Talk to me man. The suspense is killing me. Lol.
AT&T HTC OneX
Android 4.1.1
ViperXL

mcnaught82 said:
My computer can now see my sd card and I can add programs to it. im logged into recovery under TWRP. What do I do now to flash a recovery onto my phone?
Click to expand...
Click to collapse
TWRP is recovery. You don't need to flash a recovery.
Also, you are not even remotely bricked. If the screen turn on, the phone is not bricked, and is usually easily recoverable. Not knowing what to do is not being "bricked" or "partially bricked". It just means you need to read more.
You may just need to flash boot.img using fastboot. ViperXL is supposed to flash boot.img within the AROMA installer (even on hboot 1.14), but it doesn't always work for everyone.
Also, be sure to factory reset (within TWRP, not in hboot) and also wipe Dalvik and cache (also in TWRP) before installing the any new ROM, as failure to do so can also result in bootloops. Don't ever factory reset in hboot, since it will corrupt the SD card, and you will have to reformat using your computer if that happens.
No offense, but it seems you lack some understanding of basic concepts (what recovery is, how to run RUU), and it would probably be a good idea to read and learn more before flashing anymore ROMs or doing any more mods. Failure to fully understand the things you are doing to your phone can result in a real brick (which you do not have).

I stayed up till late this morning trying to help him and last I heard he installed a Rom without flashing g apps package. I have tried to correct the issue but have not heard anything else. Please take the time to research what you are doing before flashing a Rom. Soft bricks are really tricky.
AT&T HTC OneX
Android 4.1.1
ViperXL
---------- Post added at 12:23 PM ---------- Previous post was at 11:52 AM ----------
redpoint73 said:
TWRP is recovery. You don't need to flash a recovery.
Also, you are not even remotely bricked. If the screen turn on, the phone is not bricked, and is usually easily recoverable. Not knowing what to do is not being "bricked" or "partially bricked". It just means you need to read more.
You may just need to flash boot.img using fastboot. ViperXL is supposed to flash boot.img within the AROMA installer (even on hboot 1.14), but it doesn't always work for everyone.
Also, be sure to factory reset (within TWRP, not in hboot) and also wipe Dalvik and cache (also in TWRP) before installing the any new ROM, as failure to do so can also result in bootloops. Don't ever factory reset in hboot, since it will corrupt the SD card, and you will have to reformat using your computer if that happens.
No offense, but it seems you lack some understanding of basic concepts (what recovery is, how to run RUU), and it would probably be a good idea to read and learn more before flashing anymore ROMs or doing any more mods. Failure to fully understand the things you are doing to your phone can result in a real brick (which you do not have).
Click to expand...
Click to collapse
I know the ViperXL 3.1.0 will install with aroma on hboot 1.14. Any newer version will need to a flash boot image using fastboot or gui just to be safe.

[TOOL] MID change without ENG HBOOT | Aroma GUI

This tool will allow you to easily change MID directly from custom recovery (without ENG HBOOT!!!).
YOU MUST BE S-OFF!
Before using this tool you need to be sure you are using latest version of custom recovery (TWRP or CWM). The current downloads for both CWM and TWRP can found below:
The latest M7 U/UL TWRP can be downloaded HERE. I recommend using TWRP 2.6.3.3.
The latest M7 U/UL CWM can be downloaded HERE.
This will work for Intarnational version, GE, T_Mobile, AT&T and Verizon but NOT TESTED for SPRINT DEVICE!!!
To use this tool please copy zip file to your phone and then boot into custom recovery and choose Install. Then browse to where you copied zip file and select it. Aroma installer will begin. Choose options you want to run.
There will be created backup of original block on /sdcard before making changes.
Please save this backup on your computer (in case of restore) .
Reboot into bootloader after installing and check your new modelid (MID):
Code:
fastboot getvar mid
The echo command can be problematic in aroma, but I solved these problem.
I tested this tool! Everything works!
If AROMA Installer stops at 0% then you must to press Power button and hold 15-17 seconds to reboot. Then go into recovery and start installation again. This will help you.
***Credits***
amarullz for his AROMA Installer Script.
scotty1223 for his ADB shell commands. Threads HERE.
crushalot for his [TOOL] Lock/Unlock Bootloader + Remove Tampered | Aroma GUI and idea.
***Download***
MID_Change_TOOL_v.1.01.zip - 2.66 MB
md5: ae54b6e28a925270661994dbe16eb742
Enjoy!

reserved

any idea why the aroma installer never moved passed 0.00%? Any way I can boot up? Stuck on the aroma installer
***Edit***
Nevermind. I got out of Aroma installer

I recommend using TWRP 2.6.3.0
If AROMA Installer stops at 0%, then you must to press Power button and hold 15-17 seconds to reboot. Then again go to recovery and start installation. This will help.

Hey, thank you for your work. But i have questions why would i want to change MID? What is the difference between MIDs?

adakaya1994 said:
Hey, thank you for your work. But i have questions why would i want to change MID? What is the difference between MIDs?
Click to expand...
Click to collapse
Why change MID? Answer - here.

i was looking for this yesterday. thank you ... i am trying to change my MID. twrp 2.6.3.3 and it stucks at 0%.
---------- Post added at 01:59 PM ---------- Previous post was at 01:57 PM ----------
tried it again and flashed successfully. don't give up tryin' guys

fethi2 said:
i was looking for this yesterday. thank you ... i am trying to change my MID. twrp 2.6.3.3 and it stucks at 0%.
---------- Post added at 01:59 PM ---------- Previous post was at 01:57 PM ----------
tried it again and flashed successfully. don't give up tryin' guys
Click to expand...
Click to collapse
Yeah, right. You had to try again, see my post.

Golv said:
I recommend using TWRP 2.6.3.0
If AROMA Installer stops at 0%, then you must to press Power button and hold 15-17 seconds to reboot. Then again go to recovery and start installation. This will help.
Click to expand...
Click to collapse
thanks works great!!) and also please note that this tool is for dev edition too..

Just wanted to say thank you for your work bro. I am such a noob when it comes to changing MID's and this did the trick for me. Highly appreciate it! :highfive:

Golv, just wanted to say thanks. And I would reiterate his point that you need TWRP 2.6.3.0 for this to work.

Hello and I wanted to say it works! for me i work on ClockWork Mod.:good::good:

If I go supercid and supermid can I then get updates not intended for my country? Can I use this tool on Htc one max?

jaypeg123 said:
If I go supercid and supermid can I then get updates not intended for my country?
Click to expand...
Click to collapse
No, you can't. If you change mid and sid for another country, you must change rom and firmware for this country to receive OTA.
jaypeg123 said:
Can I use this tool on Htc one max?
Click to expand...
Click to collapse
I don't know partition table of HTC One Max, so I can't give advice.
If partition table is identical to HTC One (M7), then you can use this tool.

Thanx Glov,
I used the old method for a long time but tonight i tried your flashable zip and it worked fantastically using Philz modified CWM Recovery!!!

im just not sure about this tool, it flash some numbers to the parition, isnt fastboot oem writemid PNxxx the same?

darkarvan said:
im just not sure about this tool, it flash some numbers to the parition, isnt fastboot oem writemid PNxxx the same?
Click to expand...
Click to collapse
The tool can be useful for those, who don't have a computer
Sent from my HTC One using Tapatalk 4 Pro

thanks, didn't thought of that!

darkarvan said:
im just not sure about this tool, it flash some numbers to the parition, isnt fastboot oem writemid PNxxx the same?
Click to expand...
Click to collapse
Have you checked this command line? Is it works on stock hboot or just on engineering hboot?

please make for PN0751000
i change my htc one dual to PN0710000
ineed back to PN0751000
pleaseeeeeeeeeee
thanks.

[Q] one xl bricked need help

I have a one xl cid rogers001 hboot 2.14, baseband 0.23a.3 2.09.29.... jb 4.1 with sense 4+
I tried unlock bootloader by htcdev => ok
install recovery => ok. and when i installed this rom: http://forum.xda-developers.com/showthread.php?t=1868236, it was stuck in bootloader. i fogot root my phone before.
so i relock my device, and tried to flash this stock rom using adb : OTA_EVITA_UL_JB_45_S_Rogers_WWE_3.17.631.2_0.23a.3 2.09.29_10.128.32.34a_release_299850qstr7rxdbfuofl 6j.zip (was found in this thread: http://forum.xda-developers.com/showthread.php?t=2119610)
On cmd via fastboot i type fastboot erase cache =>ok
fastboot oem rebootRUU => ok
fastboot flash zip "filename.zip" It says " (remote: 12 signature verify fail") in the end cmd
What should i do now?
Thanks for reading and help me pls!!!!

Ok, first mistake is that you thought you needed to be rooted to flash the Viper ROM, you don't. All you need is an unlocked bootloader and custom recovery, which you had. You were probably stuck in the bootloader because you forgot to flash the boot.img from the ROM zip with fastboot, you need to do this because you're s-on.
The next mistake you made was attempting to flash an OTA. I don't know what made you think that you could do that but it definitely wasn't found in this forum (or anywhere for that matter). An OTA is only a partial OS, it relies on the correct stock OS to already be installed on the device to build on top of to update the existing OS. It failed for obvious reasons.
Unlock your bootloader again, flash a custom recovery again, and flash the ROM again. Make sure you flash the boot.img this time and it should boot right up. I'd strongly recommend you read the Evita FAQ thread and the How-To Guide For Beginners thread in my signature. Diving into modifying your device without the proper level of knowledge is a really bad idea.
Sent from my Evita

timmaaa said:
Ok, first mistake is that you thought you needed to be rooted to flash the Viper ROM, you don't. All you need is an unlocked bootloader and custom recovery, which you had. You were probably stuck in the bootloader because you forgot to flash the boot.img from the ROM zip with fastboot, you need to do this because you're s-on.
The next mistake you made was attempting to flash an OTA. I don't know what made you think that you could do that but it definitely wasn't found in this forum (or anywhere for that matter). An OTA is only a partial OS, it relies on the correct stock OS to already be installed on the device to build on top of to update the existing OS. It failed for obvious reasons.
Unlock your bootloader again, flash a custom recovery again, and flash the ROM again. Make sure you flash the boot.img this time and it should boot right up. I'd strongly recommend you read the Evita FAQ thread and the How-To Guide For Beginners thread in my signature. Diving into modifying your device without the proper level of knowledge is a really bad idea.
Sent from my Evita
Click to expand...
Click to collapse
fisrt, thanks for helping me. but i've flash boot boot.img file in .zip after i install rom from sdcard. after that, phone stuck in bootloader.
i've unlock bootloader and flash recovery again, and now it says can't mount sdcard. how can i copy viper rom into internal storage? sideload? flash zip? and after all, my phone still not root, can flash viper rom without root?
sorry for my english. thanks again!

somebody help me pls

veveve said:
somebody help me pls
Click to expand...
Click to collapse
Please be patient, we all have lives outside XDA.
veveve said:
fisrt, thanks for helping me. but i've flash boot boot.img file in .zip after i install rom from sdcard. after that, phone stuck in bootloader.
i've unlock bootloader and flash recovery again, and now it says can't mount sdcard. how can i copy viper rom into internal storage? sideload? flash zip? and after all, my phone still not root, can flash viper rom without root?
sorry for my english. thanks again!
Click to expand...
Click to collapse
Did you perform a factory reset from the bootloader at some point? If so you've corrupted your sd card, you should never perform a factory reset from the bootloader. If this is the case you'll need to use TWRP to wipe your sd card, then you should be able to mount it to Windows and use Windows Explorer to format. Once this is done you can for a ROM across again.
Exactly which build of Viper did you try to flash? What's the exact filename? Did you check the md5 before flashing?
Sent from my Evita

timmaaa said:
Please be patient, we all have lives outside XDA.
Did you perform a factory reset from the bootloader at some point? If so you've corrupted your sd card, you should never perform a factory reset from the bootloader. If this is the case you'll need to use TWRP to wipe your sd card, then you should be able to mount it to Windows and use Windows Explorer to format. Once this is done you can for a ROM across again.
Exactly which build of Viper did you try to flash? What's the exact filename? Did you check the md5 before flashing?
Sent from my Evita
Click to expand...
Click to collapse
yes, i did it more than once, now it's fixed, but when i mount it to Windows using TWRP, nothing happen, so i can't format it. and the same things when i tried to sideload. But in fastboot mode, it usual.
and i flashed the newest rom in this thread: http://forum.xda-developers.com/showthread.php?t=1868236 ViperXL 4.2 and i didn't check the MD5
back to my previous question, can i fash a custom rom without root?

I asked for the exact filename of the ROM for a reason, I need that please. Also, exactly which recovery are you using?
Sent from my Evita

Yes, you can flash a custom Rom without root. He already answered that. I strongly recommend reading up on your device before flashing anything else. I'd suggest starting with getting your phone s-off.

nem1yan said:
Yes, you can flash a custom Rom without root. He already answered that. I strongly recommend reading up on your device before flashing anything else. I'd suggest starting with getting your phone s-off.
Click to expand...
Click to collapse
I disagree. I think it's a better idea for him to get his head around the simple operations like flashing ROMs before attempting s-off.
Sent from my Evita

timmaaa said:
I asked for the exact filename of the ROM for a reason, I need that please. Also, exactly which recovery are you using?
Sent from my Evita
Click to expand...
Click to collapse
Full ROM:
Jelly Bean - Android 4.2.2 / Sense 5
ViperXL 4.2.0
Main Link: http://www.androidfilehost.com/?fid=23134718111254927
Mirror 1: http://goo.im/devs/Turge/ViperXL/ViperXL_4.2.0.zip
Mirror 2: http://d-h.st/z4Q
Click to expand...
Click to collapse
and at the first time, i used ClockworkMod Touch 6.0.2.8 Official from here: http://forum.xda-developers.com/showthread.php?t=2148909
after, i used this: twrp-2.7.0.8-evita.img
Thanks!

I know which ROM you're flashing, I need the filename, as it appears in your file browser or Windows Explorer or something. Like this:
Code:
Romname.zip
Sent from my Evita
---------- Post added at 01:19 AM ---------- Previous post was at 01:18 AM ----------
And you should always check the md5 of anything you're about to flash. You should do that now to make sure the file isn't corrupt.
Sent from my Evita

timmaaa said:
I know which ROM you're flashing, I need the filename, as it appears in your file browser or Windows Explorer or something. Like this:
Code:
Romname.zip
Sent from my Evita
---------- Post added at 01:19 AM ---------- Previous post was at 01:18 AM ----------
And you should always check the md5 of anything you're about to flash. You should do that now to make sure the file isn't corrupt.
Sent from my Evita
Click to expand...
Click to collapse
it is ViperXL_4.2.0.zip
i'll do it next time!

No sure, but i think you need to have an older version of twrp to flash the Viper like 2.6.1.0...

veveve said:
it is ViperXL_4.2.0.zip
i'll do it next time!
Click to expand...
Click to collapse
Did you check the md5? Does it match?
Sent from my Evita
---------- Post added at 08:49 AM ---------- Previous post was at 08:49 AM ----------
bzhmobile said:
No sure, but i think you need to have an older version of twrp to flash the Viper like 2.6.1.0...
Click to expand...
Click to collapse
You might be onto something.
Sent from my Evita

timmaaa said:
Did you check the md5? Does it match?
Sent from my Evita
---------- Post added at 08:49 AM ---------- Previous post was at 08:49 AM ----------
You might be onto something.
Sent from my Evita
Click to expand...
Click to collapse
I mean, i didn't do it and i will do it next time

bzhmobile said:
No sure, but i think you need to have an older version of twrp to flash the Viper like 2.6.1.0...
Click to expand...
Click to collapse
thanks, i will try.

Make sure you check the md5 before flashing. A corrupt zip could brick your phone.
Sent from my Evita

timmaaa said:
Make sure you check the md5 before flashing. A corrupt zip could brick your phone.
Sent from my Evita
Click to expand...
Click to collapse
but i still have trouble with mounting internal storage using TWRP on windows, should i try the older TWRP?

What version do you have installed?
Sent from my Evita

timmaaa said:
What version do you have installed?
Sent from my Evita
Click to expand...
Click to collapse
here
and at the first time, i used ClockworkMod Touch 6.0.2.8 Official from here: http://forum.xda-developers.com/show....php?t=2148909
after, i used this: twrp-2.7.0.8-evita.img
Click to expand...
Click to collapse