I do apologize for filling up this forum with yet another "Did I brick..." question, but I'm really at my wits end and need some guidance.
This morning I decided to update my kernel to ElementalX 5.0. Prior to this I was using the 4.5b kernel and had no issues, but I wanted to move to the stable release and hadn't had any issues in the past. I have ViperXL 3.2.3 installed on this as well. I have yet to apply S-Off as I haven't had any real issues at the time and wanted to wait for the weekend when I had enough time to dedicate to the process (life is hectic blah blah blah).
I downloaded and installed the 5.0 kernel as I had previously, making a nandroid prior to the install. I decided to try some of the overclocks/undervolts that everyone raves about so during the install I chose the 2.1GHz overclock (because I can always step it down if it gets flaky, right?) as well as overclocking the GPU and undervolting to 850. I also went with zRAM as usual. After this was done and the phone rebooted twice (a common occurrence) I was brought to the window where Android was optimizing my apps. After that completed, I was brought to my home screen where I saw the clock and everything else. It looked like yet another successful install....and then the phone went black. Since then I have been unable to get it to boot. Pressing and holding the Power + Volume Down does nothing. I've held it for over a minute and no blinking capacitive lights or anything. The charge light does not come on when it's plugged in and, while my computer first tried to install the drivers when I plugged it in, I received an error saying the device was unplugged and no matter what I do I cannot get it to try to install again. Device Manager doesn't show it as being plugged in and it no longer comes up in Windows Explorer. Prior to the install the batter was at 83% and I have had it plugged in now for almost 20 minutes and still the charge light has not illuminated.
I never thought it would be possible to kill this phone, but I think I successfully did. Does anyone have any insight, suggestions, or helpful pointers. Yes, I know this was a risk I took doing this and I am not going to bemoan the fact that I did this to myself...I just really want to know if it's possible to resurrect this phone.
HTC OneXL
Hboot 1.14
S-On
Leave it plugged in to a wall charger for a while
a box of kittens said:
Leave it plugged in to a wall charger for a while
Click to expand...
Click to collapse
So do that as opposed to plugging it into a PC? Asking since I don't have a cube with me at the moment and will need to run home at lunch to grab one if the case.
Yes into the wall charger...and hold power for thirty seconds does anything light up?
As for my own experience I have had trouble getting my phone to reboot or get into the bootloader when it plugged in. The charger seems to keep the phone turned on while it charging. Try unplugging it from the charger and try again.
Sent from Xparent Red using my Venomized Evita
This happened to me too, but I got it to reboot by holding down the power button. What's happened is that the phone thinks the battery is dead. When it comes back up, you'll probably show 1% charge. Somehow or another, the battery monitor data gets corrupted. I think it's related to the general battery data bug that's plagued this phone from the beginning.
Your phone clearly can't handle 2.1 and undervolting (I increased my voltage to run 2.1). Bump up the voltage when you get it back up.
Pdj7969 said:
So do that as opposed to plugging it into a PC?
Click to expand...
Click to collapse
Definitely. The wall charger is much faster than USB from a computer.
IT LIVES!!!!
I ran home and grabbed my wall charger and brought it back to work. I plugged the phone into the charger and let it sit. After about 2 minutes, the charging LED lit up. I gave it about 15 minutes and then tried to power it on but it was no go, turning off the charging light and not doing anything, so I let it charge for another 30. When I thought it should be good and ready, I decided to go ahead and attempt to boot into the bootloader, as my fear was that the undervolt and massive overclock would most likely bring me back to square one. Holding down Power and Volume Down, I said a silent prayer to the device gods.....and the capacitive buttons began flashing.
Once I got into the bootloader, I quickly booted into TWRP, cleared cache and Dalvik, and then reinstalled ElementalX 5, this time choosing the stock voltage and not overclocking the GPU. I kept the overclock at 2.1 because, like I said before, if the phone is flaky, I can dial back the speed and restore functionality. I like the idea of having the option to go balls-to-the-walls if I WANT to, but not necessarily will I go that route.
After the lengthy kernel install and the normal 2 boots, I was met with my beautiful Viper lock screen. Thank you guys so much for the insight into needing to charge from the wall instead of the PC. I never imagined the computer would refuse provide a charge to it if it was completely dead (or the phone thought it was completely dead...once I got into TWRP it stated battery life was 86%). I am calibrating the battery now as I just realized it hasn't been done in probably 6 ROM installs.....derp!
Since this issue is resolved now, the thread can be closed. Thanks again, all!
Pdj7969 said:
I never imagined the computer would refuse provide a charge to it if it was completely dead
Click to expand...
Click to collapse
USB charging might still work, it would just take a lot longer. Some folks have had to plug there wall charger for hours or overnight, even on the wall charger, to get their phone booted again. So the wall charger is just better since its faster.
redpoint73 said:
USB charging might still work, it would just take a lot longer. Some folks have had to plug there wall charger for hours or overnight, even on the wall charger, to get their phone booted again. So the wall charger is just better since its faster.
Click to expand...
Click to collapse
And it may have, but the thing I noticed in the 90 or so minutes it was connected to my work PC was that the phone was the coldest it had ever been since I got it, meaning that the usual warmth caused by charging was not present at all. I did notice in Device Manager that when I plugged in the phone, it would register the phone as an HID (Human Input Device) and then it would disappear, only to reappear again and then disappear once more. This would happen non-stop until I disconnected it, so perhaps that's why it didn't charge at all during the time it was plugged into the computer? In any event, good ol' wall current supplied the juice necessary to bring this sucker back to life, so I'll file this info in my memory banks and make sure I have a wall charger at my desk from now on.
Related
OK, never had any auto resets, just had to manually restart often to cure various ills. Then yesterday it was stuck on the dimmest backlight setting. This morning picked it up from charging overnight and it's 100% dead. Switched batteries, plugged it into various computers and USB power sources. Dead.
Anyone brought a G2x back to life?
Have you tried a wall charger? If your battery discharges completely, like deader than dead, then sometimes you have to plug it into a wall charger and leave it there for several minutes before the phone will even show its connected to a charger.
I guess the real question to ask first is, what did you have it plugged in to? What kind of charger? Was it plugged into a surge protector?
It was plugged into the LG wall charger it came with overnight. I tried a iGo USB wall -> USB power supply and a USB port on my desktop windows PC.
dylanear said:
OK, never had any auto resets, just had to manually restart often to cure various ills. Then yesterday it was stuck on the dimmest backlight setting. This morning picked it up from charging overnight and it's 100% dead. Switched batteries, plugged it into various computers and USB power sources. Dead.
Anyone brought a G2x back to life?
Click to expand...
Click to collapse
It depends on how dead it is, if its a hardware defect of some sort then you're probably SOL. But, you don't have to be able to turn it on per se to use NVFlash, so if I were you I would try to see if you can get the device to be recognized using the APX drivers. If you can, then you might have a chance.
My G2x died after freaking up during one of the Davlik cache clears....
It originally would boot up and get stuck at "LG", but after a while it was completely unresponsive (not even a Boot Logo) and wouldn't even turn on. I thought it was fried. Luckily we have NVFlash that you can use without booting the phone up.
Take the battery out and press and hold the VOL keys, then plug it in. Your PC should "ping" letting you know something was connected. Then just reflash a recovery.
I did this a ton of times and it didn't work at first. I kept flashing stock then CWM, then stock, then CWM (different versions too). Eventually it displayed the LG logo and allowed me to boot into CWM where I flashed a new rom.
Been solid ever since.
I also read about this in the Asus Transformer forums (cause I just picked one up) and read about a guy experiencing the same thing.
Worth a shot. The NVFlash method will at least let you know if it is DEAD or just not working. If NVFlash doesn't connect then it is hosed. If NVFlash connects and accepts a new recovery, then something just got corrupted.
All good now! I unplugged, removed battery, let sit a while. Put the battery back in and it booted! Yet more strange behaviour from the G2x, but as usually I get it working again and stick with this phone.
But today I got a second from craigslist to play with alternate ROMs. Trying CM7.1 RC1 first, it's working pretty good on my Nook.
I was away from home for 2 days and forgot my charger. Naturally the battery died.
I came home and charged the phone (plugged in the USB cable), left it for an hour or so and tried to turn it on. I got a "spinning" black and white wheel (which is actually frozen). Next comes the grey image of an empty battery which doesnt show charging (filling with green) even when the phone is plugged in. The home, back, etc. etc. buttons flash white for a moment and the phone turns off. Try again, same thing.
I thought maybe the USB wast connecting or charging so i took the battery out and charged it on an external charger which shows that it is full. Put it in, same thing.
Tried hard reset but cant complete it because samsung logo screen doesnt come on, only "empty battery" image.
Phone doesnt show up on my mac. etc. etc.
I am out of ideas...
btw no kind of water contact or dropping.
I really hope someone has another suggestion or can point me in the right direction.
Thanks for reading.
oops didnt read full post
Try going to att and use a charged battery there. Your battery may just be dead from over discharging.
RUNNERX said:
oops didnt read full post
Try going to att and use a charged battery there. Your battery may just be dead from over discharging.
Click to expand...
Click to collapse
thanks. i plugged it in and will let it sit for a while. i did try to turn it on as soon as i plugged it in and still saw the battery which didnt appear to be charging, but i know from previous experiance that when a phone is really dead the battery wont start it immediately even when plugged in.
thanks for the advice. my fingers are crossed
edit: ok. i'll try that also. if i can get away with just replacing the battery thats fine
this happened to me several times as well. My fix was easy.
Plug it in and forget about it for an hour. Unplug it, power it up, plug back in as soon as you see it start to boot. Should boot and charge.
I don't know why, but when its DEAD dead DEAD, it won't boot while its plugged in, nor will it show charging.
I hope that helps!
hopeful...
madamimadam said:
this happened to me several times as well. My fix was easy.
Plug it in and forget about it for an hour. Unplug it, power it up, plug back in as soon as you see it start to boot. Should boot and charge.
I don't know why, but when its DEAD dead DEAD, it won't boot while its plugged in, nor will it show charging.
I hope that helps!
Click to expand...
Click to collapse
Thank you for the advice. I am happy to know someones dealt with this before and I am not the only one.
I just want to be sure. When you say that it starts to boot up, do you mean the samsung logo or the b/w wheel with empty (grey) battery image?
I tried to plug in the USB when the empty batt. was showing but it didnt seem to respond. Also I am wondering, when it finally connects do you still just let it charge or do you fully boot it up? Also does the battery show that it was keeping a charge from the first hour you left idle or does it only start to keep the charge after youve done this process?
Sorry for all the questions. This is just a bit for me....
update: OMG! just plugged it and instead of an empty batt. it was 90% green! phone still shut off again but i am very hopeful something is going on. I am going to keep messing around
update2: thank you so so much. This finally worked. saved me a considerable amount of money and untold grief. Basically I followed your directions in hyper mode. Power on, USB (in/out/in/out/in/out), phone shuts off, immediately power on again, etc., etc., until it worked.
Thank you.
FYI, a proper charger (instead of a PC's USB port) will cause the device to go into a higher-current charging mode that MIGHT have behaved better.
You can only charge your phone when its off on stock. Being in a rom it will reboot hence your frozen spinner and grey battery. Try it now that your battery is fully charged a d it will just reboot.
Sent from Optimus-Prime's Samsung Infuse 4G
just had the same problem tonight, but when I pulled out the battery it had a fried electronics smell in the battery
Same thing happened to me driving home from Thanksgiving break. I've come to the conclusion that if you flash a non Samsung from then you have to have the infuse on to charge. Even with a dead battery I managed to get the infuse on, then immediately shut the screen off for about 30 sec before proceeding to quickly turn setcpu into power save mode before shutting screen off and leaving it off for a few hours. Should veeerryyy slowly but surely charge (stupid samsung ..... takes forever to charge and there are times when the battery goes down in heavy CPU apps or when on 4g, I noe its safer that way but its not like I'm going to have that phone for the next 5 years)
Sent from my SGH-I997 using XDA App
So glad I found this. My wife's "Infused" Infuse was "acting weird" according to her. Said there was a weird "DOS" like screen for a second, then the dead/grey battery logo. Take bat out and put back in. Nothing. Plug in and start up and it either goes from the Samsung logo to off, and repeat that, or show the Dead/Grey battery thing again. Well, tried the turn on while unplugged, and immediately plug in, and it started up. Even said the batt was 96% charged! Really confusing. So are there any other ROMs usable on this thing? Infused is OK, but man, just not nearly as good as my N1 running CM7.
Thanx again for the tip!
jwrezz said:
So glad I found this. My wife's "Infused" Infuse was "acting weird" according to her. Said there was a weird "DOS" like screen for a second, then the dead/grey battery logo. Take bat out and put back in. Nothing. Plug in and start up and it either goes from the Samsung logo to off, and repeat that, or show the Dead/Grey battery thing again. Well, tried the turn on while unplugged, and immediately plug in, and it started up. Even said the batt was 96% charged! Really confusing. So are there any other ROMs usable on this thing? Infused is OK, but man, just not nearly as good as my N1 running CM7.
Thanx again for the tip!
Click to expand...
Click to collapse
everything in development is.... obviously. Also, do make sure your read everything first lol it can really help you and other people at the end.
I got the infuse for me and the wife in early December. After the initial charge she used hers for about a day and half then tried to charge it.
Nada.
Tried different USB cables, swapped batteries. Turned out the USB port died. Talk about a PIA!!!
Best buy swapped it out no problem and let me keep all the stuff in the old box.
Just picked up a Skyrocket last night.
When the phone is on the charger and you do a power off it looks like she is shutting down, but then goes right back on. Took the charger off and then she powers off as normal.
Anyone else have this or seen this?
This is normal for all phones besides maybe a couple. For example if you're sleeping and you get a big metal pipe shoved up your arse wouldn't you wake up?
Even if you shut it down, if the SR senses there's power there than its going to use it for charging against your will.
Sent from my SGS2 Skyrocket Running NeXuSM0D v2.1
Thanks For the reply MOD1441. I understand that it should charge when it's off and the charger is plugged in, But if I want the device powered off it should stay off and charge.
Ive never seen this on a device.
If it goes back on to a screen with a battery charging than the phone is OFF. That's not android, that's part of the devices kernel (It's built in to the hardware)
it does a reboot. Goes right to lock screen. Will not power offf. Do you have the skyrocket?
turn it off and then plug it in.
Had the same issue with a couple of different roms. I don't know if its kernel or rom related, but try some different ones and see if it goes away.
thepcpilot said:
it does a reboot. Goes right to lock screen. Will not power offf. Do you have the skyrocket?
Click to expand...
Click to collapse
Oh I see. This happened to me on my T-Mo GS2. It was the kernel. I recommend flashing the stock kernel or going back to stock via Odin
Sent from my SGS2 Skyrocket Running NeXuSM0D v2.1
Oh wait, you just got it recently, I think you have a defective device, because its never happened to me
Sent from my SGS2 Skyrocket Running NeXuSM0D v2.1
M0D1441 said:
This is normal for all phones besides maybe a couple. For example if you're sleeping and you get a big metal pipe shoved up your arse wouldn't you wake up?
Click to expand...
Click to collapse
Hahahah, love the scientific explaination
skyrocket wont shut off figured out!!!
So your skyrocket wont shut off and sometimes it drains and wont turn on and vibrates while off well I hadthesesame problems and I finally figures it outand its an easy fix. Your skyrocket came with a square power adapter so use that next time you charge it up and it works like it did when you first bought the phone. It turns off and the charging battery animation comes back. Hope this works for all you having this same issue.
*scratches head* ..uuh, yea. In re: to what @warren_gamer said, I agree. But check this out...
I have a factory replacement from AT&T, stock, un-rooted. I have drained the battery down until phone powers off. Upon plugging in with original power adapter and cable, the phone vibrated while off and then turned itself on. I have NEVER been able to get the phone to stay powered off while charging.
The first new SR I had, out of the box, did charge with a battery animation.
So, I'm under the assumption that its a kernel & hardware issue. It's annoying but so is a large pipe up your arse.
I just tested this with mine.
If I turn it off *before* plugging in the power, it turns back on when I plug it in.
If I turn it off *after* plugging in the power, it stays off for me.
Power right now = my computer.
Jack Shaftoe said:
I just tested this with mine.
If I turn it off *before* plugging in the power, it turns back on when I plug it in.
If I turn it off *after* plugging in the power, it stays off for me.
Power right now = my computer.
Click to expand...
Click to collapse
Have you solved this yet? I've had a Skyfire for about 2 months. It always shut off normally, charged at the battery filling display, until this week. I plugged it in to the USB port on a Delta 757 to charge and since then it will not turn off. I've uninstalled the apps that were installed after that, etc. I don't have the Samsung charger with me. I've removed the battery and put it back in to no avail, but maybe I didn't remove it long enough.
Sometimes the answer is right in the question
santonoff said:
Have you solved this yet? I've had a Skyfire for about 2 months. It always shut off normally, charged at the battery filling display, until this week. I plugged it in to the USB port on a Delta 757 to charge and since then it will not turn off. I've uninstalled the apps that were installed after that, etc. I don't have the Samsung charger with me. I've removed the battery and put it back in to no avail, but maybe I didn't remove it long enough.
Click to expand...
Click to collapse
You said it yourself " I don't have the Samsung charger with me." This phone is sensitive to the correct (or enough perhaps) charging voltage. Once you get home or wherever your charger is, try it again, you may get a positive result from doing so... Worth checking out in any event.
By the way, I assume when you say "since then it will not turn off" that you man it will not turn off while charging, correct? If it won't turn off period, you obviously have deeper troubles. What I would advise is, when you have the Samsung charger: Shut the phone off first, then cable it to the charger. Then, when it boots (which I would expect it to do as this is normal) try to shut it down. Hopefully having the 1.0 amp charger on there will show it who da boss!
I do fing it AMAZING there these come with a 5.0v 1.0a chargeer, the same as the Note, I believe (at least as far as amperage) - I suspect it is because of the big honkin' 1850ma battery these have to overcome the demands of LTE. Shoot, my Transformer Prime has a 1.0a Charger for a Tablet, with 2 batteries, though the voltage is higher.
When I first got my skyrocket it would stay powered off while charging. Once I upgraded to the leaked ROMs it will no longer stay powered off when charging. As a workaround I leave the phone in flight mode.
Hi all,
So my transformer is bricked... completely been trying hard reboot, APX mode, holding power button, HDMI output the list goes on.
My only final resort is what I've read is draining the battery down and trying to recharge it? (Just need some confirmation here please if possible).
I've kept it in the dock, what I've noticed is, in the morning it was green LED now its gone to the amber so something is draining the battery I"m hoping I can get this down to 0.
How long do you guys think with both dock + pad and most likely on standby. Not too sure of the issue here
Anyway, I'm really reluctant to send this back to Asus RMA because in short:
1. First time I sent it, it got returned like a squeaky box. Every where you held it you heard a creak like it was about to snap. They didn't fix some things, and more dust ended up in my camera lens... + had to pay postage..
2. Half fixed, came back with wrong firmware (TW --> US). Could never update ever again, so microsd card updates FTW. No way was I planning on spending an extra month sending my TF back and forth... I paid extra to get the first batch B40 lol.. They replaced everything inside my TF motherboard, screen, Inside LED!?, buttons. Close to the works..
This happened right after I upgraded to ICS, it was the US stock rom booted up fine. my apps were updating, and as everyone else was saying about how some apps caused ICS to slow down I wasn't aware so I thought I would shut it down and power it back up. Since then it's not been able to come up ever again... Any suggestions?
What do you think?
Thanks in advanced.
One other thing, could someone check.. when tablet is docked and OFF. Do the usb ports still work?
Right now, when docked but "bricked" I can still charge my phone via USB.. If someone could test this that would be much appreciated as that could at least eliminate that my TF's battery is dead, right?
get it off the dock, hold volup+pwr, count to six and leave it for a couple of days. You can test if it's empty when you plug it in your pc via the cable. If you get the device plugged sound it means there's still juice there - unplug and press again volup+pwr. when you unplug it from the pc the tab shuts itself down.
if you don't volup+pwr before you plug in the usb it won't turn itself on. but it turns off automatically at unplug, as I said.
after the battery is down, plug the tab to the charger. I don't have the dock so I can only speak about the tab itself. Don't know why, but it works for me everytime. Hope it fixes yours, then, if possible, root and flash something.
bigblondewolf said:
get it off the dock, hold volup+pwr, count to six and leave it for a couple of days. You can test if it's empty when you plug it in your pc via the cable. If you get the device plugged sound it means there's still juice there - unplug and press again volup+pwr. when you unplug it from the pc the tab shuts itself down.
if you don't volup+pwr before you plug in the usb it won't turn itself on. but it turns off automatically at unplug, as I said.
after the battery is down, plug the tab to the charger. I don't have the dock so I can only speak about the tab itself. Don't know why, but it works for me everytime. Hope it fixes yours, then, if possible, root and flash something.
Click to expand...
Click to collapse
Hi there,
Thanks, I'll that a try.
It's definitely charging and discharging, the battery brick is warm.. I've never had to connect my tablet to a windows PC. Today I did, it didn't make a sound.. Do I need to fully charge to be able to turn it on?
Normally not. I plug mine to the charger, I don't remember if it stats or I have to press power, when it boots the battery stays at 0% for several minutes.
Sorry for the late reply, did you manage to wake it? It's a long procedure of waiting mainly and can get annoying.
I'm still trying, earlier you had a thread about it poping up through the computer. What was the command you used in Linux?
Windows gives me nothign even when there was power in it.
Thanks.
Thank you sooo much!! It finally has powered back on, I hope this doesn't happen again.
Hi All, my wifes s6 (using xtrestolite rom) has stopped taking a charge. Im trying to figure out what the issue is. Unfortunately im travelling for the next month so have limited trouble shooting options.
Background
- wife has been complaining that her phone battery dies quickly. I kind of dimissed her assuming it was in her head. she said it loses 10percent in standby mode in 1hr roughly. Shes been complaining about this for a week.
- yesterday at the airport her battery was at 12% and when we plugged it in to charge it wouldnt take a charge. Bolt icon did not come up and still said "connect charger" on the screen. Normally when connected the red Led comes on, but now it doesnt.
-our normal chsrging method is using and aukey 3port charger as fast charging mode.
Troubleshooting/diagnosis
- i have an s6 as well so i tested all the cables and chargers on my phone and it works. We even had the official samsung charger and cable but same issue.
- after the phone was completely dead, if you plug in the charging cable the charging bolt icon comes on for a few sec, the top left says "kernel is on seandroid enforcing" for a sec and then everything goes blank. Red charging led doesnt come on. So it seems like it detects the cable but wont charge enough to boot up.
- i was able to boot into twrp recovery but where its supposed to have a battery level its completely blank. Originally i was able to do this without any canles but then it wouldnt. My guess is that i orginally had a bit of juice and then it was completely dead.
-after leaving it plugged in for a sec, im able to turn it on where it boots and i can see it says 0% battery. It stays on for 5sec before turning off itself.
- i also tried plugging it into laptop, but laptop does not detect it. The phone does detect the power though and does the same as above but this time bolt charging icon stayes on for 1-2min before going off and seeing the "kernel is on seandroid icon". Once the seanadroid goes away nothing seems to happen. After doing this i was able to turn it on and it showed 1%. I thought this was promising but after trying this a few times ive never been able to get to 1percent again.
- with the brief charge thst i guess its getting, i was able to go i to twrp recovery and do a factory reset. This was with cable plugged in the whole time. Without cable in i dont think it would complete the action.
That about summarizes whats happened.
Ive concluded the following:
- charger and cables are ok and not the issue
- it is not the charging port since the phone does seem to be getting some juice bacause charging icon comes on for 2sec whenever cable is plugged in.
- its not a software/app issue since it wont charge even in recovery mode. Also factory reset was done and no luck.
My best guess is that the battery can only hold a 0-1% charge which is enough to register it being plugged in but not enough to do anything else. But if everything else is ok shouldnt it work when if the cable is just left in. This makes me think theres something else going on.
Any suggestions or theories would be much appreciated trying to decide if i should pay to get battery replaced.
Sorry for the long post. Figured it is best to give all info.
Thanks in advance!
Update June 3:
Hey everyone, just a correction on the above. It looks like it is able to charge in recovery (slowly). I realized that although there is no battery level during recovery, no charging led, and not booting up after being charged for a bit, maybe its just going slowly.
So i went into recovery and left it overnight on the non-fast charging and woke up after 8hrs and it was at 78percent!!!
Im not sure why it didnt go to 100% in 8hrs.
The phone still doesnt charge regularly when plugged in, so still need to fix that.
Do you guys think its a rom issue (only factory reset done before) ? I will see if i can get a rom for flashing.
Update 2:
Reflashed xtrestolite rom but still no luck. It wont charge.
Seems like a dead battery.
Sent from my SM-G920F using XDA-Developers mobile app
Battery.
Hey everyone, just a correction on the above. It looks like it is able to charge in recovery (slowly). I realized that although there is no battery level during recovery, no charging led, and not booting up after being charged for a bit, maybe its just going slowly.
So i went into recovery and left it overnight on the non-fast charging and woke up after 8hrs and it was at 78percent!!!
Im not sure why it didnt go to 100% in 8hrs.
The phone still doesnt charge regularly when plugged in, so still need to fix that.
Do you guys think its a rom issue (only factory reset done before) ? I will see if i can get a rom for flashing.
Update 2:
Reflashed xtrestolite rom but still no luck. It wont charge
Bump.
Went to the phone store and they said its probably not the battery but the ic chip for charging? This will cost 150, but doesnt include the screen if they break it...
Does this make sense since i can charge in recovery.
Thanks. Any direction or input is much appreciated.
Go on the local store and change your battery (if isn't in warranty)
Hi all, just wanted to update the post that the issue is semi-fixed.
I brought it into a repair shop who offered to diagnose the problem for free before paying to replace the battery.
He told me there was nothing wrong with it and not sure what my issue was. Plugs in the charger and lo and behold it was charging. He said he didnt do anytning to it except blow some compressed air on the port.
Im guessing the comporessed air cleaned out a short? So now it charges properly.
The issue remaining is that the pc doesnt detect the phone. It shows as charging on the phone but no conmection. Tried to install the latest samung driver (1.5.4xxx?) but no luck. On occation sometimes it says "usb port has malfunctioned" but other times nothing.
My s6 does actually connect, so definitely my wife's s6 itself and not comp. Im tempted to buy some comlressed air and give it ankther blow, but dont want to risk messing it up again. im pretty happy that it at least charges up.
Hope this helps others that might have similar issue.