Related
Im rooted my desire Z yesterday to the gingerbread sense 3.0/3D rom.
im very happy that i have done it and my battery experience is either improved.
but my experience of the reaction time, smooth animation ect. were kindly bad
this is why i want to overclock my processor, but the rom included the new kernel 2.6.35.10 to be exactly. this kernel is not yet overclockable and i wanna know why.
- why make different kernels need different methods of overclocking
- why can it by bad if you overclock it to high.
- can i just flash another kernel to overclock my new gingerbread sense 3.0 rom.
Soulbody said:
Im rooted my desire Z yesterday to the gingerbread sense 3.0/3D rom.
im very happy that i have done it and my battery experience is either improved.
but my experience of the reaction time, smooth animation ect. were kindly bad
this is why i want to overclock my processor, but the rom included the new kernel 2.6.35.10 to be exactly. this kernel is not yet overclockable and i wanna know why.
- why make different kernels need different methods of overclocking
- why can it by bad if you overclock it to high.
- can i just flash another kernel to overclock my new gingerbread sense 3.0 rom.
Click to expand...
Click to collapse
if you overclock the processor of your device you can smoke your DZ
but if you do it with careful it is not bad for your device.
the kernel that you have its a stock kernel (factory kernel) and its not customized for to be over/underclocked... you should flash another kernel for to change CPU speeds...
nornally you can overclock your desire z (good machine mate ) 1.300mhz-1500mhz i not recommend to do overclock upper than 1500-1700... i had read some threads that some people was smoked his device (all with the proccessor QUALCOMM SNAPDRAGON 1ghz)another think its the freeze problem when you overclock your processor too much.. be careful!
and one important thing.. also its important if you do underclock.... don´t put it under 245mhz more or less because maybe your device don´t has sufficient power to exit of stanby mode
i recommend that ALWAYS do overclock with SETCPU.apk that its available free for XDA MEMBERS its the most safety mode
sorry for my english
SERGI.3210 said:
if you overclock the processor of your device you can smoke your DZ
but if you do it with careful it is not bad for your device.
the kernel that you have its a stock kernel (factory kernel) and its not customized for to be over/underclocked... you should flash another kernel for to change CPU speeds...
nornally you can overclock your desire z (good machine mate ) 1.300mhz-1500mhz i not recommend to do overclock upper than 1500-1700... i had read some threads that some people was smoked his device (all with the proccessor QUALCOMM SNAPDRAGON 1ghz)another think its the freeze problem when you overclock your processor too much.. be careful!
and one important thing.. also its important if you do underclock.... don´t put it under 245mhz more or less because maybe your device don´t has sufficient power to exit of stanby mode
i recommend that ALWAYS do overclock with SETCPU.apk that its available free for XDA MEMBERS its the most safety mode
sorry for my english
Click to expand...
Click to collapse
EDIT:for to do overclock you must to download a new kernel (compatible with your current rom) and flash it from recovery or via adb you decide!
cheeeerrrssss mate
Noob
Hey guys, just wanted to know if theres an easier way to overclock the newest htc kernel?
Hey guys, just wanted to know if theres an easier way to overclock the newest htc kernel?
Click to expand...
Click to collapse
YOU CANT OVERCLOCK AN STOCK KERNEL YOU MAY TRY AN OVERCLOCKABLE KERNEL IN DEVELOPMENT SECTIION OF YOUR DEVICE..
Sent from my NEXUS Susing the XDA mobile application powered by Tapatalk
How to Remove the CPU Speed limit of 600Mhz on Android 2.2, When I use Andoird 2.3 on this Device [Commtiva Z51], I am able to Clock the CPU at ~800Mhz, I want to do this on Android 2.2, I have a rooted Device.
Maybe a CPU Tuner
I am sure you can find a free one on Google Play you should take a look.
akshatcool12345 said:
How to Remove the CPU Speed limit of 600Mhz on Android 2.2, When I use Andoird 2.3 on this Device [Commtiva Z51], I am able to Clock the CPU at ~800Mhz, I want to do this on Android 2.2, I have a rooted Device.
Click to expand...
Click to collapse
What you are referring to is known as overclocking (oc)...in order to overclock, you need a custom kernel, since (mostly) the stock kernel doesnt support oc
...
[Fyi, Android 2.3 is better than 2.2 in a lot of ways...]
I.AM.H3RO said:
I am sure you can find a free one on Google Play you should take a look.
Click to expand...
Click to collapse
??? What are you trying to tell??
Typed using a small touchscreen
I already have No-frills CPU control from the play store and it works but not over 600Mhz and yes, it is Overclocking (OC), I am running a custom rom, Android 2.3 Roms are available but i am not using those as they drain the battery really fast (even without overclocking). It seams like it is a limitation with Android 2.2 as I have tried other Roms also and they too have the same problem.
No nothing like that...
Oc is kernel dependent...you can make an oc kernel for froyo also...
And if you oc, you will get faster battery drain, and maybe heat issues...
Typed using a small touchscreen
Overclocking
Currently I am using this Rom (Jellybean <link> slinkme.co.cc/jellybean <link> [Added like this as I cant add links now]) , As far as I know this supports overclocking. And also if this kernel does not support Overclocking, Can you give me a OC kernel for Android 2.2.1 (This Rom).
All devices are different, and so is their kernel/rom/etc....you cannot use stuff for my device on yours...
And jellybean is sypposed to be android 4.x/5...and not 2.2.1
Give me a screenshot of the stuff written in about phone...then maybe I can point you to the right direction...
Typed using a small touchscreen
Jellybean is my Rom name, it is Android 2.2.1, I want a Kernel that Supports OC, Do you have one ? Android Jellybean is 4.1.
My Device : http:~//~slinkme.co.cc/mydevice (Remove ~ for the link)
My Rom : http:~//~slinkme.co.cc/jellybean (Remove ~ for the link)
Not very original calling it jelly bean
Sent from my GT-S5360 using XDA
Firstly, I just don't blankly visit random websites...
And secondly, I asked for screenshot for about phone...
If you want help, you've got to LET ME HELP!
Or just plain get ignored...
Typed using a small touchscreen
Just flash an overclock kernel, then install setcpu and overclock
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
a.cid said:
Firstly, I just don't blankly visit random websites...
Click to expand...
Click to collapse
That (slinkme.co.cc) is just a URL Shortener Website like goo.gl.....
a.cid said:
And secondly, I asked for screenshot for about phone...
Click to expand...
Click to collapse
I have changed all that but you might need the kernel version so this is it...
Kernel Version: Apps_2.6.23.9
Crash_HF said:
Just flash an overclock kernel, then install setcpu and overclock
Click to expand...
Click to collapse
I know that, Can you give me kernel that supports Overclocking..
I already have setCPU, No-Frills CPU Control, Antutu CPU Master..
Can anybody help me please !!
Sent from my Z71 using xda premium
i think you can use Set CPU. you can find its on google play or appstore.vn/a
the easiest way...ask your rom developer to make a kernel with OC support. you can't compile a kernel for your device and neither me since I don't even know what your device is.
thanhhai8888 said:
i think you can use Set CPU. you can find its on google play or appstore.vn/a
Click to expand...
Click to collapse
I already have setCPU , No frills and antutu CPU master.
I need to flash a OC kernel to the device but I can't find one.
Sent from my Z71 using xda premium
akshatcool12345 said:
I already have setCPU , No frills and antutu CPU master.
I need to flash a OC kernel to the device but I can't find one.
Sent from my Z71 using xda premium
Click to expand...
Click to collapse
You really should listen to these guys & ease up on the attitude. YOU'RE the one needing help and they really are trying.
What kind of PHONE do you have & ROM are you running? THAT determines the kernel.
Be carefull,
It can damage your device...
(Sorry for my bad English)....
Every ChaCha user know that, we have no chance to under/overvolting, gpu overclocking.
Can somebody make a kernel for us? Actually i dont know anything about kernel im just a user. It can be very hard, impossible etc. I need an information about it...
I'm using cm10 rom by adlx. Thank you!
is there any kernel overclocked for chacha?
overclocking htc chacha
is there any kernel that can be over clocked for chacha?
we cant over clock chacha. becouse htc company maximum overclocked cpu ARM V6 600mhz To 800Mhz. i dont think this phone accept more overclock
egean said:
(Sorry for my bad English)....
Every ChaCha user know that, we have no chance to under/overvolting, gpu overclocking.
Can somebody make a kernel for us? Actually i dont know anything about kernel im just a user. It can be very hard, impossible etc. I need an information about it...
I'm using cm10 rom by adlx. Thank you!
Click to expand...
Click to collapse
Status have a 600 MHz processor that HTC overclock it to 800 MHz by releasing ChaCha. that frequency is maximum of this chip. that's all.:good:
>> Please press Thanks:good: if you find this post useful <<
First as always, I am not responsible for any damages caused by using any files I release.
ok, right down to the point of this post.
I built kernel with the help of faux123 with OC/UV & GPU OC and have been asked to release it, so here it is:
Downloads:
iconiaN Kernel for A700 Final version
Currently it only clocks to 1.5GHz (Used SetCPU) more work is still to be done
GPU is OC'd to 520MHz
I welcome feedback and suggestions :fingers-crossed:
Please do NOT package these kernels with a custom ROM, instead point your users to this thread
Massive thanks to faux123 for complying with GPL, as I borrowed the GPU OC & UV from his kernel sources.
GPL States I should provide full source, so here it is: on GitHub
Wow. That's definitely a must have! I hope this will change the experience and launches apps faster.
Aren't the CPU and the GPU put together in one socket?
Will this kernel be packaged in iconiaN 2.2 by any chance?
I wondered why you wrote that the GPU is clocked at 1.5 Ghz. That`s a little bit too high in comparison with the mali 400 and other mobile GPU. Now I looked at your github and I see 520 MHz. A really nice Overclock too. Maybe you have clocked the CPU to 1.5 GHz?
I will test the kernel in a few minutes. Big THX for this
I was tired.
Was thinking CPU lol.
Yes it is a 520MHz sorry
I've not done the cpu oc yet though.
Sent from my EndeavorU using xda app-developers app
Hmmm I`ve downloaded the ZIP file 2 times now from your github and when I try to install it I got "Installation aborted". No detailled error-message :-/.
Ill check it when home
Sent from my EndeavorU using xda app-developers app
Vorbeth said:
This is a quick draft post, I will add more info etc when I have time.
First as always, I am not responsible for any damages caused by using any files I release.
ok, right down to the point of this post.
I built kernel with a GPU OC to 520MHz, and have been asked to release it, so here it is:
Downloads:
iconiaN Kernel for A700 md5:4c721b5e48aac85ca9bb52d1499499f6
iconiaN Kernel for A701 - not yet available, in testing md5:c362485581dd770eebdc85dce2244410
I welcome feedback and suggestions :fingers-crossed:
Please do NOT package these kernels with a custom ROM, instead point your users to this thread
Massive thanks to faux123 for complying with GPL, as I borrowed the GPU OC from his kernel sources.
GPL States I should provide full source, so here it is: on GitHub
Click to expand...
Click to collapse
Vorbeth,
I downloaded and installed this last night. It was stable, but seemed to lag a bit. I think the OC of the GPU helps less than an OC of the CPU. Running the modified kernel OC'd at 1.4 seems to have a greater impact than OC'ing the GPU... it really seems like 1.3 GHz is not fast enough to support the higher clock speed on the GPU...???
Obviously, getting the both ramped up would seem to be the best scenario.
Your work on all of this for the A700 is very much appreciated!
Sent from my A700 using xda premium
This kernel does have the 1.4GHz cpu speed.
I'm going to see if I can push it a bit more.
Aiming for 1.6GHz CPU & 600MHz GPU.
Sent from my EndeavorU using xda app-developers app
Yes Sir! If 600 GPU aren`t stable, I think we can life with 500 too, when the CPU runs fine at 1,6 Ghz.
I`ve tested Wild blood(gameloft game with the Unreal engine 3, that works after I edited the build.prob) with your default kernel, and I think it was around 20 fps so I definitively need more horse-power
Sorry for the Double post, but I have downloaded your new kernel from google docs, and I`ve got no error during the CWM installation. So nothing to worry about Sir
Vorbeth said:
I built kernel with a GPU OC to 520MHz, and have been asked to release it, so here it is:
Click to expand...
Click to collapse
What is the original GPU speed of the A700?
It seems that wiki thinks it's already 520MHz:
http://en.wikipedia.org/wiki/Tegra#Tegra_3
TomONeill said:
What is the original GPU speed of the A700?
It seems that wiki thinks it's already 520MHz:
http://en.wikipedia.org/wiki/Tegra#Tegra_3
Click to expand...
Click to collapse
If you look here https://github.com/iconiaN/android_kernel_acer_a700/commit/b2e3176ae3bd68d38835e776443cb84f82272b7e
You will see that it was 416MHz, the same as the nexus 7 and One X
Thank you for your reply. Seems like iiki doesn't have the correct information, since the One X is also listed there where the GPU says 520MHz.
Holy crap, THIS is getting attention on the friggin homepage, but this thread isn't? What is wrong with xda?
Hi, can I use this kernel with the nightly's build of cm 10?
BonzenPaule said:
Hi, can I use this kernel with the nightly's build of cm 10?
Click to expand...
Click to collapse
You may need to repack it with the CM10 ramdisk, but other than that it should work
Is it easy to implement NTFS write capabilities into the kernel?
Sean09 said:
Is it easy to implement NTFS write capabilities into the kernel?
Click to expand...
Click to collapse
This will be fixed at the weekend, with my current work hours I currently don't have time to compile the kernel and get it uploaded
Thanks Vorbeth - when you do get around to it, is it possible to post a link to a flashable kernel version that we can use with the CM10 nightlies?
This has been out a while now (and I've not had time to try it myself), but has anyone out there been using this this past while? Thoughts? Anyone? Bueller?
Finally after someone pm'd me I looked back into GPU Overclocking.
New thread created issues with old thread OP permissions (people seem to be asking the same questions over and over again all information will be kept in OP & DO READ THE THREAD, repetitive questions will now be ignored)
Benefits:
Smoother UI
Handle 2d & 3d core GPU intensive applications & games
Currently only 2D core has been overclocked working on 3D core OC
2D-core original value - 192mhz OC to 245mhz DONE achieved 25% performance boost grp_2d_clk outputs 245760000hz
3D-core original value - 245mhz OC to 300+mhz WIP hoping to achieve 40-50% performance boost
2D-core OC only Download: Coming soon...
Download Links for other devices coming soon...
Works for all HTC Sense/Cm9/Cm10 kernels (Just ask a kernel developer for your device to implement the source code)
Note: Don't have internet on PC so providing 3 main files that need replaced for 2D-core OC to work
Download link to source code: http://d-h.st/wbH
3D-CORE OC TESTS Download: Coming soon...
Do check under sys/kernel/debug/htc_clock/clks/ look for file with all clocks & look for GRP_clks (Graphics clock)
OK so basically today I've been thinking and I've come to the conclusion that I will release the 2D-core OC patch As Soon As Possible, 3D-core Core OC is NOT Impossible but for now I'll give it a break, I will attempt 3D-core OC If/When I can get a hold of a msm7x30/msm8x55 device, as it will make it much easier for both me & users.
So for now you can enjoy the 50mhz increase/bump up, perf boost 25% in 2D-core (will increase performance in both 2D/3D intensive appications as 2D-core is used for 3D AFAIK and increase User Interface performance (Note: This will not take a hit on battery life)), I will also release a couple of fixes on patchas kernel that shouldnt be there/set etc.
(Theres a device available in my area for roughly £90, if anyone wants to contribute towards getting that device or can donate a device , more than welcome and shoot me a PM so I can list you here.)
(This isnt a promise of 3D-Overclock if you donate, if you donate please do so expecting nothing I will only attempt 3D-overclock)
Working device list - all kernel 3.0+ msm7x30/msm8x55 soc devices.
Main thread is in Desire HD Android Development section: http://forum.xda-developers.com/show....php?t=2368497
thanks for your work
i m just curious
what s the difference with this:
3d: https://github.com/kylon/AndromadusMod-New/commit/bccb6227f629d5dbb6687e0aa851dd86b4fac01a
2d/ increase 3d: https://github.com/kylon/AndromadusMod-New/commit/e623d0449be04081d0418b799fbe3737371dd56c#diff-137 (this is a big commit, sorry)
there is a good performance boost with this, also, now, you can see 8fps on Antutu (openGL 2.0) (6/6.5 before)
tested on cm10.1
What is this.? Kernel patch... Working with our desire S with cm 10.1 instaled and stock kernel that come with Flinny last 24.2 test built?
Sent from my Desire S using Tapatalk 2
kylon said:
thanks for your work
i m just curious
what s the difference with this:
3d: https://github.com/kylon/AndromadusMod-New/commit/bccb6227f629d5dbb6687e0aa851dd86b4fac01a
2d/ increase 3d: https://github.com/kylon/AndromadusMod-New/commit/e623d0449be04081d0418b799fbe3737371dd56c#diff-137 (this is a big commit, sorry)
there is a good performance boost with this, also, now, you can see 8fps on Antutu (openGL 2.0) (6/6.5 before)
tested on cm10.1
Click to expand...
Click to collapse
Hi I'm unable to look at patch no.2 its too big for the laptop to handle but to comment on the first one it takes more than modifying the kernel graphics software layer platform data to overclock the kernel especially if its the 3d core it takes more, the msm7x30/msm8x55 is a very unique soc, im not sure where those values were pulled from but sure doesnt make sense. Afaik no one has yet managed 2d oc nvm 3d oc until now... :s
You can find them in the incredible s dev section
We have the same soc
Sent from my Desire S using Tapatalk 4 Beta
kylon said:
You can find them in the incredible s dev section
We have the same soc
Sent from my Desire S using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yeah basically ive seen it all, all the commits on the devices with this gpu oc only modified the kgsl pdata with random values they want LOL, its false that isnt how it works, the 2d oc i done is 100x easier than 3d oc and look, i modified more than the kgsl pdata just to get the 2d-core running a measly 50mhz boost.
Hi! How can apply this patch?
AFAIK you´re no kernel dev, right? Maybe by reading OP
Download Links for other devices coming soon...
Works for all HTC Sense/Cm9/Cm10 kernels (Just ask a kernel developer for your device to implement the source code)
Click to expand...
Click to collapse
El Aero said:
Hi! How can apply this patch?
Click to expand...
Click to collapse
Download the .zip and flash in the recovery.
NVardan said:
Download the .zip and flash in the recovery.
Click to expand...
Click to collapse
Lol
NVardan said:
Download the .zip and flash in the recovery.
Click to expand...
Click to collapse
not sure about this))
Отправлено c моего Desire S
El Aero said:
not sure about this))
Отправлено c моего Desire S
Click to expand...
Click to collapse
teadrinker said:
Lol
Click to expand...
Click to collapse
It didn't work for me too lol.
Sent from my Desire S using Tapatalk 4 Beta
NVardan said:
Download the .zip and flash in the recovery.
Click to expand...
Click to collapse
Nah. There is no zip. Link in the op is for source. So a developer like kaylon have to merge it. OP just posted the source he is trying to compile not made any kernel yet. If I'm reading the OP right.
Wow I'm still a noob
niravnn said:
Nah. There is no zip. Link in the op is for source. So a developer like kaylon have to merge it. OP just posted the source he is trying to compile not made any kernel yet. If I'm reading the OP right.
Wow I'm still a noob
Click to expand...
Click to collapse
Thanks for clarifying! I thought, it should have been flashed as a .zip. My noob level is over 9000.
I hope amidabuddha includes this in his awesome kernel
Sent from my Desire S using xda app-developers app
NVardan said:
Thanks for clarifying! I thought, it should have been flashed as a .zip. My noob level is over 9000.
Click to expand...
Click to collapse
Holy Jesus, just open the .zip you've downloaded...really :laugh:
seems it is not working on my kernel
based on what you said in the dhd dev section i should see 245mhz in /sys/kernel/debug/htc_clock/list_clocks or in /sys/kernel/debug/clk/grp_2d_clk/rate
but they say 192
while i can see 245 in sys/devices/platform/kgsl-2d0.0/kgsl/kgsl-2d0/gpuclk
your files are different, especially kgls_pwrctrl(you are using an old kgsl)
maybe the jb kernel needs some more edits
kylon said:
seems it is not working on my kernel
based on what you said in the dhd dev section i should see 245mhz in /sys/kernel/debug/htc_clock/list_clocks or in /sys/kernel/debug/clk/grp_2d_clk/rate
but they say 192
while i can see 245 in sys/devices/platform/kgsl-2d0.0/kgsl/kgsl-2d0/gpuclk
your files are different, especially kgls_pwrctrl(you are using an old kgsl)
maybe the jb kernel needs some more edits
Click to expand...
Click to collapse
Push your code to github n link me to it n ill have a look at it
I cannot push the code to github
I can give you my files, tonight
EDIT:
the 3d oc is still there, even if it is not a real oc, it gives us a performance boost