Database Info

[Q] Serious Restarting Problem

ok so I was using my 1+1 as usual but suddenly this cm launcher stop responding error came with a window saying report or ok..whatever u press the window kept coming up so I had to reset my device deleted all my media and everything and then the phone restarted loading screen came load finished and the welcome screen came...but I can't get pas the welcome screen anymore...by the time i select the language the phone restarts and keep on restarting on the same place...I tried flashing stock rom using 1+1 toolkit but it didn't work...any idea??

Ishan Sardar said:
ok so I was using my 1+1 as usual but suddenly this cm launcher stop responding error came with a window saying report or ok..whatever u press the window kept coming up so I had to reset my device deleted all my media and everything and then the phone restarted loading screen came load finished and the welcome screen came...but I can't get pas the welcome screen anymore...by the time i select the language the phone restarts and keep on restarting on the same place...I tried flashing stock rom using 1+1 toolkit but it didn't work...any idea??
Click to expand...
Click to collapse
You might wanna try this
I had a constant CM lockscreen has stopped issue and the above method fixed it.

[Q] Nexus 6 (CM12) Won't Boot Properly (URGENT!)

Hello XDA!
This morning, I attempted to flash Cyanogenmod 12 (CM12) onto my Google Nexus 6 using this youtube tutorial that I cannot link in this post, because I am a new member. The title of the video is "How to install CyanogenMod 12 Official Lollipop on the Nexus 6" It can be found on youtube.
Whenever I boot up the phone, it shows the "Google" screen. then the Cyanogenmod boot animation appears. A white popup shows up saying "Android is Starting Up. Finishing Boot" The entire screen then comes to life with cyanogen's default background. Finally, an error message consumes the screen saying "ENCRYPTION UNSUCCESSFUL. Encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible. To resume using your phone, we need to preform a factory reset. When you restore your phone after the reset, you'll have an opportunity to restore any data that was backed up to your google account." The only button shown on the screen says "RESET PHONE". If clicked, the phone reboots, but before it can boot it gets stuck loading the TWRP Recovery application. What happens is, it'll show the TWRP logo, then the screen will turn off, then it'll show the TWRP logo again, then this loop will repeat endlessly. The only thing that I could do was reboot the phone into the boot loader by holding down the power button, and the volume down button. From here, I attempted to boot into recovery mode. The same thing happens, the TWRP screen loads, then disappears, and that just repeats itself endlessly. I also tried to preform a factory reset, but that didn't work.
As you can see, I really need some help.
The encryption failing may be caused because I came off of a custom ROM where I had the phone's encryption disabled.
THANK YOU VERY MUCH, and if I can provide any information, please ask.

[Completed] Phone stuck at android robot logo on micromax a120

Hello,
To begin with, I had rooted my micromax a120 with the help of Vroot through pc almost a year ago. Just today when I was checking out an app called '3c toolbox pro', I chose an option that read 'clear cache'. Immediately thereafter I recieved several messages of apps getting closed or not working. I thought that a normal reboot would do the trick but I was wrong. At first the phone opened to a complete black screen with nothing but time and signal strength of my telecom provider(which had changed color ) and nothing else!
I pressed power button(which only had two options of 'power off' and 'reboot') to power off. When I switched it back on it was stuck at 'Canvas' logo for a long time after which it started to Bootloop.
I tried going into recovery mode and wiping cache first(no solution) and then wiping data/factory reset(again no solution).
It was stuck at android robot logo and as I am writing this it has been switched off and not turning on even when connected to the charger.
Heck! I think it is bricked.
Help anyone???
thanks!!
edit: phone has finally switched on but still stuck at the android robot logo(no loop)

Skypriest said:
Hello,
To begin with, I had rooted my micromax a120 with the help of Vroot through pc almost a year ago. Just today when I was checking out an app called '3c toolbox pro', I chose an option that read 'clear cache'. Immediately thereafter I recieved several messages of apps getting closed or not working. I thought that a normal reboot would do the trick but I was wrong. At first the phone opened to a complete black screen with nothing but time and signal strength of my telecom provider(which had changed color ) and nothing else!
I pressed power button(which only had two options of 'power off' and 'reboot') to power off. When I switched it back on it was stuck at 'Canvas' logo for a long time after which it started to Bootloop.
I tried going into recovery mode and wiping cache first(no solution) and then wiping data/factory reset(again no solution).
It was stuck at android robot logo and as I am writing this it has been switched off and not turning on even when connected to the charger.
Heck! I think it is bricked.
Help anyone???
thanks!!
edit: phone has finally switched on but still stuck at the android robot logo(no loop)
Click to expand...
Click to collapse
Hi, and thank you for using XDA Assist
Try here to ask,you may get a good answer.
Good luck!

[Karbonn Sparkle V] Device bricked, please help

My Karbonn Sparkle V appears to have bricked itself, I don't know why, I don't know how to fix it, and I don't have the money or time to replace it. I turned it off when I was going to a job interview, prior to which it was working fine. Afterwards I tried to turn it back on, and for the last 12 hours I've been fighting to get it working again with no success.
I can get into recovery mode, but nothing more. If allowed to try a normal boot, then it will either stay on the "Karbonn Smart" logo screen forever and ever amen, or it will APPEAR to boot, but once it reaches the lock screen it dies on its arse. The best-case is that the lock screen will stay up for about 3 seconds, then the screen will go black for another 3 seconds, and then we go back to the lock screen and the process repeats. OR, the lock screen comes up, 3 seconds, and then we go back to the bouncing dots loading screen forever and ever amen.
I tried a hard wipe from recovery mode - it's made absolutely no difference.
This is a stock phone which has only ever received the OTA updates; I've never rooted it, I don't have a custom recovery installed, and I've never used ADB before today.
I've downloaded a number of "stock ROMs" for this phone, but none of them actually work for me; it doesn't seem to matter whether I try to install them through Recovery mode\Apply update from ADB, or put them on the SD card and try "Apply update from SD card". For most of them, I get the error "failed to verify whole-file signature" and it won't install; I tried to install the stock file from https://forum.xda-developers.com/crossdevice-dev/android-one-general/ota-links-t3287707 but that doesn't get me much further; The error becomes
"Package expects build thumbprint of 6.0.1/MMB290/2459718:user/release-keys or 6.0.1/MMB29K/2419427:user/release-keys; the device has 6.0.1/MOB31E/3142026:user/release-keys"
Click to expand...
Click to collapse
I have pretty much no idea what I'm doing here; Please help.

Bootloop at Samsung logo

My S7 has suddenly rebooted and now it won't go pass Samsung logo. At the first few reboots I was able to see PIN unlock screen where it would eventually freeze and automatically reboot, but now as I removed SIM and microSD it will only boot to Samsung logo in best case.
I have tried to enter recovery mode, but it freezes after 7 seconds at initial screen stating "updating system files". I can only successfully enter download mode.
What should I do? The warranty is not valid anymore, could I flash it with odin? Is there any way to recover data from internal memory? Please help.

krneki10 said:
My S7 has suddenly rebooted and now it won't go pass Samsung logo. At the first few reboots I was able to see PIN unlock screen where it would eventually freeze and automatically reboot, but now as I removed SIM and microSD it will only boot to Samsung logo in best case.
I have tried to enter recovery mode, but it freezes after 7 seconds at initial screen stating "updating system files". I can only successfully enter download mode.
What should I do? The warranty is not valid anymore, could I flash it with odin? Is there any way to recover data from internal memory? Please help.
Click to expand...
Click to collapse
Hey, same problem here !
I have, in addition of all that, the famous "Black screen & blue led" issue when i try to boot up my S7.
But my phone keep freezing when he try to boot. Keep freezing and rebooting 30 seconds after i unlock the screen with the pin (when he can boot), and for the recovery, it works for me, but only once in ten ...
Every times he freeze at the boot, i must wait when the battery hae 0% and shut down automatically
i already tried to wipe cache, but the situation doesn't change anymore.
i don't know too how to recover the internal storage data ...
If someone can help us .. :fingers-crossed:
(For me, my phone is entirely stock, and never flashed)