Cant install new recovery - HTC Sensation

Hi, ive been trying to S-off and root my HTC sensation using this guide
http://forum.xda-developers.com/showthread.php?t=1870233
ive managed to get up to step 2, but unable to flash a new recovery using instructions in this guide and also whilst trying kgs utility…. Im pulling my hair out tbh been at it for hours…
so basically, I unlocked my phone, then have got s-off..but now cant get new recovery to get rooting.
when I use the utility in theafore mentioned guide. It either cant find device or just hangs. When I use the kgs utility, it looks promising until I get the message the system cannot find the bacth label specified - dl_4ext_found
any ideas?

try this
boot your device into bootloader
connect your device into pc via usb(it should say fastboot usb)
now in your pc place the recovery.img in the folder where you have adb and fastboot files
open a command window in that folder and do this command
fastboot flash recovery recovery.img

hi rzr86, thanks for the help. tried what you said, but it tells me remote not allowed. any ideas?
c:\android>fastboot flash recovery recovery.img
sending 'recovery' (6348 KB)...
OKAY [ 1.619s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.936s
c:\android>

gdallas said:
hi rzr86, thanks for the help. tried what you said, but it tells me remote not allowed. any ideas?
c:\android>fastboot flash recovery recovery.img
sending 'recovery' (6348 KB)...
OKAY [ 1.619s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.936s
c:\android>
Click to expand...
Click to collapse
hmm ok,
do you have htc drivers installed?
also check if you are using 2.0 usb ports
enable also usb debugging mode
edit:i just inform you also that the recovery can be renamed as recovery.img
i mean when you perform the command do it like this
fastboot flash recovery <the name of recovery>

rzr86 said:
hmm ok,
do you have htc drivers installed?
also check if you are using 2.0 usb ports
enable also usb debugging mode
edit:i just inform you also that the recovery can be renamed as recovery.img
i mean when you perform the command do it like this
fastboot flash recovery <the name of recovery>
Click to expand...
Click to collapse
hi, i noticed that even though I now have S-off, my phone went back to "locked" status. So i tried uinllocking it again, and currently it is now. I flashed the recoevry again as per your instruiction, and seems to have worked!! but not really sure, how would i tell? is there a simmilar way to root it too as when i use the kgs utitly is now goes into a boot loop when i attempt to root.
thanks

gdallas said:
hi, i noticed that even though I now have S-off, my phone went back to "locked" status. So i tried uinllocking it again, and currently it is now. I flashed the recoevry again as per your instruiction, and seems to have worked!! but not really sure, how would i tell? is there a simmilar way to root it too as when i use the kgs utitly is now goes into a boot loop when i attempt to root.
thanks
Click to expand...
Click to collapse
that's why you couldn't perform the command
if i remember well after S-OFF an unlocked bootloader goes again locked
but there was no need to unlock it again
you could use an eng hboot(juopunutbear) which is unlocked
nevermind
flash this zip from recovery now
http://download.chainfire.eu/310/SuperSU/UPDATE-SuperSU-v1.04.zip
it will give you root

hi and thanks..
So i should capy this to my SD card, then what? sorry for the noob questions.

gdallas said:
hi and thanks..
So i should capy this to my SD card, then what? sorry for the noob questions.
Click to expand...
Click to collapse
Hi,
Yes.
Copy to the root of your sd card.
Flash like a ROM.

malybru said:
Hi,
Yes.
Copy to the root of your sd card.
Flash like a ROM.
Click to expand...
Click to collapse
thanks gents

hmm, i think i must be doing this wrong guys. it thought I flashed the recoevery ok, but then when i hit powerdown on the recovery option, it goes to an HTC logo for a while, then i see my vodafone logo etc and then have a clean install of the orginal rom i guess.
Where am i going wrong?
Many thanks

hey man u just saved my life lol
rzr86 said:
try this
boot your device into bootloader
connect your device into pc via usb(it should say fastboot usb)
now in your pc place the recovery.img in the folder where you have adb and fastboot files
open a command window in that folder and do this command
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
My htc sensation was just rebooting couldnt get into recovery, i had clockwordmod recovery, i thought i lost my phone, i searched on xda and saw ur post, and i fixed my phone thnx to you,
So just wanted to say thank you very much.

Related

[Q] flashing ROM

Hi, i want to put this ROM in my phone :
http://forum.xda-developers.com/showthread.php?t=1096043
i unlocked the bootloader with HTC DEV and rooted
hboot - 2.00.0002
radio - 3822.10.08.04_M
can u tell me what i need to do to put this rom on my device
and tell me please what is use of RADIO and hboot ?
thanks !
IgorICS said:
Hi, i want to put this ROM in my phone :
http://forum.xda-developers.com/showthread.php?t=1096043
i unlocked the bootloader with HTC DEV and rooted
hboot - 2.00.0002
radio - 3822.10.08.04_M
can u tell me what i need to do to put this rom on my device
and tell me please what is use of RADIO and hboot ?
thanks !
Click to expand...
Click to collapse
1.First download Rom manager from market
2. Rom manager flashes ClockworkMod Recovery
3. Now download that rom and save to sd card
4. Now reboot into recovery from ROM manager
5. Inside recovery navigate to backup and restore. now make backup of your current ROM(Very important) or you can directly make backup from ROM manager
6) When you finish backing up,
7) format data/factory reset
8) From advanced, format data,system,cache
9) Also format cache partition
10) Finally, goto install from zip from SD card
11) Navigate your download rom and confirm by pressing YES
12) Wail till CWM flashes
13) Reboot and wait.........................done....
And never flash radio or hboot if it is not necessary.
i did all you said, and i was stuceked at htc logo for 20 mins...i pulled out battery
and tryed to go in recovery to restore backup, and now i'm sutcked at htc logo again
i have revoluntionary cwm...
what should I do ?
sagarda7 said:
1.First download Rom manager from market
2. Rom manager flashes ClockworkMod Recovery
3. Now download that rom and save to sd card
4. Now reboot into recovery from ROM manager
5. Inside recovery navigate to backup and restore. now make backup of your current ROM(Very important) or you can directly make backup from ROM manager
6) When you finish backing up,
7) format data/factory reset
8) From advanced, format data,system,cache
9) Also format cache partition
10) Finally, goto install from zip from SD card
11) Navigate your download rom and confirm by pressing YES
12) Wail till CWM flashes
13) Reboot and wait.........................done....
And never flash radio or hboot if it is not necessary.
Click to expand...
Click to collapse
@sagarda : You forgot a very important thing... He unlocked his phone using HTC dev site. That means the boot is still locked. So the kernel is still preserved from the old ROM, which is incompatible with the ROM he's flashed now, and this is never going to allow the phone to boot up with this new ROM.
So he has to flash boot.img separately from fastboot. I know you were only trying to help, but it's best to only give advice that you have actually tried yourself, otherwise you may end up bricking someone's phone trying to help him.
As for @igorICS, you need to extract boot.img from the ROM zip, and flash it separately using fastboot if you want to boot up this new ROM. And please learn to do some reading before taking the plunge, rather than later...
i pulled battery again and i enered recovery somehow, and recived message,
''can't mount ...''
and i just restored my backup
and i dont wanna **** around with this thing...
enigmaamit said:
@sagarda : You forgot a very important thing... He unlocked his phone using HTC dev site. That means the boot is still locked. So the kernel is still preserved from the old ROM, which is incompatible with the ROM he's flashed now, and this is never going to allow the phone to boot up with this new ROM.
So he has to flash boot.img separately from fastboot. I know you were only trying to help, but it's best to only give advice that you have actually tried yourself, otherwise you may end up bricking someone's phone trying to help him.
As for @igorICS, you need to extract boot.img from the ROM zip, and flash it separately using fastboot if you want to boot up this new ROM. And please learn to do some reading before taking the plunge, rather than later...
Click to expand...
Click to collapse
Thanks for your advice.why HTC dev released the method to unlock if that Does not let other to enjoy custom ROM?
sagarda7 said:
Thanks for your advice.why HTC dev released the method to unlock if that Does not let other to enjoy custom ROM?
Click to expand...
Click to collapse
Because they are a corporation. And corporations are known for this kind of stupidity.
Heard of Apple? They are the benchmark for all this nonsense!
I flashed CoreDroid room and after that i extracted boot.img from ROM.zip
and in fastboot entered this
C:\Android>fastboot flash C:\Desktop boot.img
sending 'C:\Users\Igor\Desktop' (2194 KB)... OKAY [ 0.374s]
writing 'C:\Users\Igor\Desktop'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.655s
i get FAILED result i dont know whats the problem but I wont try to boot my phone
im afraid getting stucked on htc logo again..
tell me whats wrong
im still S-on
2.00.0002 hboot
3822.10.08.04 radio
im waiting your reply . tnx
Tried to search the error here : http://forum.xda-developers.com/showthread.php?t=1357625
But, wait for other reply here. That may not be the solution to yours.
thats not a problem my bootloader is unlocked i wait other reply.
IgorICS said:
I flashed CoreDroid room and after that i extracted boot.img from ROM.zip
and in fastboot entered this
C:\Android>fastboot flash C:\Desktop boot.img
sending 'C:\Users\Igor\Desktop' (2194 KB)... OKAY [ 0.374s]
writing 'C:\Users\Igor\Desktop'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.655s
i get FAILED result i dont know whats the problem but I wont try to boot my phone
im afraid getting stucked on htc logo again..
tell me whats wrong
im still S-on
2.00.0002 hboot
3822.10.08.04 radio
im waiting your reply . tnx
Click to expand...
Click to collapse
MarlX said:
Tried to search the error here : http://forum.xda-developers.com/showthread.php?t=1357625
But, wait for other reply here. That may not be the solution to yours.
Click to expand...
Click to collapse
The command should be:
fastboot flash boot C:\Users\Igor\Desktop\boot.img
no way bro, maybe I'm retarded but this thing wont flash...i flashed sucsessfuly boot.img and im stucked on htc logo again...doesn't matter ill press thanks button cause you tried to help me.. this thing wont flash.. i dont know why..
IgorICS said:
I flashed CoreDroid room and after that i extracted boot.img from ROM.zip
and in fastboot entered this
C:\Android>fastboot flash C:\Desktop boot.img
sending 'C:\Users\Igor\Desktop' (2194 KB)... OKAY [ 0.374s]
writing 'C:\Users\Igor\Desktop'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.655s
i get FAILED result i dont know whats the problem but I wont try to boot my phone
im afraid getting stucked on htc logo again..
tell me whats wrong
im still S-on
2.00.0002 hboot
3822.10.08.04 radio
im waiting your reply . tnx
Click to expand...
Click to collapse
Just add a \ between Desktop and boot.img!
I try not to use desktop for cmd purposes...
Just to be 100% sure, follow the steps below:
1. Make a new folder in C:\ called boot
2. Now place the boot.img in the folder you created (C:\boot)
3. Now, using fastboot, type the following at the command prompt (for you, i see that it is C:\Android) ----- fastboot flash boot C:\boot\boot.img
4. Once you get a confirmation of a successful flash, type adb reboot
5. That's it. Enjoy your new ROM !

Root official ics for desire s

has anyone already tried to root there official ics Rom that was released yesterday? And how?
Sent from my HTC Desire S using xda premium
Once you've installed the RUU, use ADB to push 4ext recovery, then reboot into recovery and flash the Supervisor 3.1.3 file - once you then reboot into the full system again you will have root access and can install the 4ext updater from the Play Store and update recovery to the latest version.
SimonTS said:
Once you've installed the RUU, use ADB to push 4ext recovery, then reboot into recovery and flash the Supervisor 3.1.3 file - once you then reboot into the full system again you will have root access and can install the 4ext updater from the Play Store and update recovery to the latest version.
Click to expand...
Click to collapse
anyone can confirm this is working?
mayurh said:
anyone can confirm this is working?
Click to expand...
Click to collapse
Yes. I can - that's why I posted the solution.
Or you can just use the search button. :banghead:
SimonTS said:
Once you've installed the RUU, use ADB to push 4ext recovery, then reboot into recovery and flash the Supervisor 3.1.3 file - once you then reboot into the full system again you will have root access and can install the 4ext updater from the Play Store and update recovery to the latest version.
Click to expand...
Click to collapse
Simon your DS was S-ON and you got it S-OFF with this procedure.
You pushed the 4ext recovery on a S-ON bootloader, right?
thank you
linqdesires said:
Simon your DS was S-ON and you got it S-OFF with this procedure.
You pushed the 4ext recovery on a S-ON bootloader, right?
thank you
Click to expand...
Click to collapse
No, my DS was S-Off - done with XTC-Clip 18 months ago.
Go to recovery mode;
choose .zip from sd card
Flash this
100%
potencia said:
Go to recovery mode;
choose .zip from sd card
Flash this
100%
Click to expand...
Click to collapse
give thanks is for free
For the people, like me, who have only done the HTCdev unlock ( S-ON ), it's quite easy to update the software/ROM using the RUU.
After downloading the RUU from here : http://forum.xda-developers.com/showthread.php?t=1857478 I just immediately ran it, but it failed with an error along the lines of : RUU, security fail! update fail!
So after a bit of googling around I figured that the RUU might simply not be happy with the phone being in an unlocked state, so after doing the following the RUU ran successfully :
1. Re-lock the bootloader with the "fasboot oem lock" command. The output after running the command shows the lock process was successful but moaned about something else failing, still not sure what that was. So after doing this my phone was kinda stuck in the bootloader, where it says ***relocked*** at the top and ***security warning!*** right underneath it. Everytime I reboot or powercycle it would just boot straight back into the bootloader with the warnings, which worried me a little bit.
2. In the bootloader I selected fastboot and connected the USB cable, and then I ran the RUU again. This time it completed successfully after some time. My HTC sync was installed but not running, so seems like that isn't even needed ?
And that's actually it. This process obviously puts the phone in a relocked state, and an overall factory configuration, it also restores the recovery ROM to the factory image or whatever.
No success
Hi,
I try to root my S-off /XTC Clip/ device, BUT:
1. 4ext pushed with adb - OK
2. I try to install recovery - 4ext wants busybux
3. I downloaded busybox - but it wants a rooted devices I got a message that "unrooted device" and busybox is closed
So I don't have recovery menu
What could be the solution ?
w_hy said:
Hi,
I try to root my S-off /XTC Clip/ device, BUT:
1. 4ext pushed with adb - OK
2. I try to install recovery - 4ext wants busybux
3. I downloaded busybox - but it wants a rooted devices I got a message that "unrooted device" and busybox is closed
So I don't have recovery menu
What could be the solution ?
Click to expand...
Click to collapse
Read the instructions correctly. Install RUU. Put phone into FastBoot mode. Use ADB to push recovery to phone. Reboot into recovery. Flash superuser from zip. Reboot phone properly. Install BusyBox from Play Store.
steps made by me
SimonTS said:
Read the instructions correctly. Install RUU. Put phone into FastBoot mode. Use ADB to push recovery to phone. Reboot into recovery. Flash superuser from zip. Reboot phone properly. Install BusyBox from Play Store.
Click to expand...
Click to collapse
1. Install RUU. -- OK
2. Put phone into FastBoot mode. -- OK
3. Use ADB to push recovery to phone. -- OK
4. Reboot into recovery. -- NOT OK -- there is no recovery menu just the red triangle.
w_hy said:
1. Install RUU. -- OK
2. Put phone into FastBoot mode. -- OK
3. Use ADB to push recovery to phone. -- OK
4. Reboot into recovery. -- NOT OK -- there is no recovery menu just the red triangle.
Click to expand...
Click to collapse
Post the exact steps and output of what you're doing. Recovery obviously isn't getting successfully installed. Which recovery are you using as well?
Isn't fastboot flash recovery recovery.img the command to flash a recovery?
Sent from my Desire S using xda app-developers app
c.m.b said:
Isn't fastboot flash recovery recovery.img the command to flash a recovery?
Click to expand...
Click to collapse
Yes
SimonTS said:
Post the exact steps and output of what you're doing. Recovery obviously isn't getting successfully installed. Which recovery are you using as well?
Click to expand...
Click to collapse
Steps made by me:
1. installed RUU -- OK
2. downloaded recovery.zip, extracted recovety.img (same directory as adb/fastboot)
3. restart phone to bootloader, fastboot usb mode
4. used "fastboot flash recovery recovery.img" command
5. got the next output:
G:\0\1>fastboot flash recovery recovery.img
sending 'recovery' (3768 KB)... OKAY [ 0.655s]
writing 'recovery'... FAILED (remote: not allowed)
finished. total time: 0.655s
In the recovery.zip file there is a version file:
ext.version=1005.3.0
ext.build=0
and recovery.md5:
3fd4750734837f6bce55b63def1e0a8b
w_hy said:
Steps made by me:
1. installed RUU -- OK
2. downloaded recovery.zip, extracted recovety.img (same directory as adb/fastboot)
3. restart phone to bootloader, fastboot usb mode
4. used "fastboot flash recovery recovery.img" command
5. got the next output:
G:\0\1>fastboot flash recovery recovery.img
sending 'recovery' (3768 KB)... OKAY [ 0.655s]
writing 'recovery'... FAILED (remote: not allowed)
finished. total time: 0.655s
In the recovery.zip file there is a version file:
ext.version=1005.3.0
ext.build=0
and recovery.md5:
3fd4750734837f6bce55b63def1e0a8b
Click to expand...
Click to collapse
What#s your current hBoot? And make sure you using the recovery files from 4EXT_Recovery_v2.2.7_RC5.zip
SimonTS said:
What#s your current hBoot? And make sure you using the recovery files from 4EXT_Recovery_v2.2.7_RC5.zip
Click to expand...
Click to collapse
hboot is 2.00...
Can you give me a link for EXT_Recovery_v2.2.7_RC5.zip, please?
w_hy said:
hboot is 2.00...
Can you give me a link for EXT_Recovery_v2.2.7_RC5.zip, please?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=21895635&postcount=172
SimonTS said:
http://forum.xda-developers.com/showpost.php?p=21895635&postcount=172
Click to expand...
Click to collapse
So:
hboot: 2.02.0002
s-off /xtc clip/
recovery.img: what you said /puted in new directory togeather with adb.exe and fastboot.exe/
command: as before
result: the same:
G:\0\4>fastboot flash recovery recovery.img
sending 'recovery' (5624 KB)... OKAY [ 0.987s]
writing 'recovery'... FAILED (remote: not allowed)
finished. total time: 0.988s

I am out from QHSUSB but can't flash recovery!

Hello,
I do not know how but my phone get out from QHSUSB and now I can go to hboot.
The problem is there is no ROM when the phone boots. It's stuck on HTC logo.
I have unlocked the bootloader with HTCDEV but it is not S-OFF. Hboot is 1.18.
When I go to fastboot I can write "fastboot flash.... recovery.img" and it goes OK, but after restars bootloader I tried to go to recover but the phone just stuck on that logo again.
I have tried CWM and 4EXT but it is the same problem.
Can I flash RUU without recovery and ROM?
Help, please!
Hi
Did you see this Thread. Maybe this helps you to flash a ROM or Recovery.
[UNBRICK] HTC Unbricking Project
Dic3ptor said:
Did you see this Thread. Maybe this helps you to flash a ROM or Recovery.
[UNBRICK] HTC Unbricking Project
Click to expand...
Click to collapse
Yes, but I don't see instructions about installig RUU afeter unbricking.
I think that this will help but I want some one to explain more about this commands:
fastboot.exe erase cache
fastboot.exe oem rebootRUU
fastboot.exe flash zip path\to\firmware.zip
Filko84 said:
Yes, but I don't see instructions about installig RUU afeter unbricking.
I think that this will help but I want some one to explain more about this commands:
fastboot.exe erase cache
fastboot.exe oem rebootRUU
fastboot.exe flash zip path\to\firmware.zip
Click to expand...
Click to collapse
Normaly RUU (Rom Update Utility) is an exe that you can run from PC to bring a ROM or ROM update to your device. As far as i know.
Where did you find this three commands?
May you could post you question to the Unbrick thread to, i´m sure that there are people that can help better as i can, because i´m a Themer and not a Developer. ;D
I get this error:
C:\android-sdk\platform-tools>fastboot flash zip PG58IMG.zip
sending 'zip' (385351 KB)...
OKAY [ 56.459s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 58.077s
Filko84 said:
I get this error:
C:\android-sdk\platform-tools>fastboot flash zip PG58IMG.zip
sending 'zip' (385351 KB)...
OKAY [ 56.459s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 58.077s
Click to expand...
Click to collapse
Can you boot your device into Bootloader by pressing Volume Down+Power Button. If yes put the PG58IMG.zip on SD Card and Boot into Bootloader, normaly the device will flash the P58IMG.zip if you start into Bootloader.
Dic3ptor said:
Can you boot your device into Bootloader by pressing Volume Down+Power Button. If yes put the PG58IMG.zip on SD Card and Boot into Bootloader, normaly the device will flash the P58IMG.zip if you start into Bootloader.
Click to expand...
Click to collapse
I have tried but the ZIP just done nothing. Loaded and.. nothing.
I think the there is some other problem. May be some partition is not accessible.
Also I now see that I have to S-OFF to flash RUU tru fastboot.
Filko84 said:
I have tried but the ZIP just done nothing. I think the there is some other problem. May be some partition is not accessible.
Also I now see that I have to S-OFF to flash RUU tru fastboot.
Click to expand...
Click to collapse
Okay, normaly the device should flash Firmware (P58IMG) when booting in bootloader. You sure that you put it directly to SD and not in a folder. PLS ask in the Unbrick thread, there are a lot of people that are more fit in developing as i am. I telled you what i´m knowing. Sorry that i couldnt help you to bring your device back to life but maybe there are people that can help. Give it a try pls.
You got the fastboot command wrong, its:
fastboot flash recovery recovery.img
In any case you cant flash a firmware with S-ON that why the unbrick thread says find an RUU exe and run it
Jonny said:
You got the fastboot command wrong, its:
fastboot flash recovery recovery.img
In any case you cant flash a firmware with S-ON that why the unbrick thread says find an RUU exe and run it
Click to expand...
Click to collapse
The comand is OK. And I get OK message that the recovery is flashed but it does not load.
Filko84 said:
The comand is OK. And I get OK message that the recovery is flashed but it does not load.
Click to expand...
Click to collapse
Flashing an RUU is a must after unbrick.
The error you got wile flashing the RUU is because your bootloader is unlocked.
Relock your bootloader using this command:
Code:
fastboot oem lock
Then, flash an RUU.
If you can paste the output of
Code:
fastboot getvar all
then I can provide you with a link to the appropriate RUU for you.
Please remove your IMEI & Serial Number from the output.
kgs1992 said:
Flashing an RUU is a must after unbrick.
The error you got wile flashing the RUU is because your bootloader is unlocked.
Relock your bootloader using this command:
Code:
fastboot oem lock
Then, flash an RUU.
If you can paste the output of
Code:
fastboot getvar all
then I can provide you with a link to the appropriate RUU for you.
Please remove your IMEI & Serial Number from the output.
Click to expand...
Click to collapse
I just was doing this fastboot oem lock but my battery is down.
I will charg for few hours and then I will try again.
The CID is HTC_032 and I think that the MID was PG58130.
I will get them again after charging.
Thank you.
Filko84 said:
I just was doing this fastboot oem lock but my battery is down.
I will charg for few hours and then I will try again.
The CID is HTC_032 and I think that the MID was PG58130.
I will get them again after charging.
Thank you.
Click to expand...
Click to collapse
Here are the appropriate RUUs:
Sensation
Sensation XE
kgs1992 said:
Here are the appropriate RUUs:
Sensation
Sensation XE
Click to expand...
Click to collapse
Thak you. I will try them.
Can I flash them just with starting exe and put the phone to fastboot usb or I have to do it other way?
Filko84 said:
Thak you. I will try them.
Can I flash them just with starting exe and put the phone to fastboot usb or I have to do it other way?
Click to expand...
Click to collapse
Yup. Just put the phone into fastboot & flash.
You need the one that is for your device. PG13001 is Sensation XE & PG13000 is Sensation.
You said your mid is PG58130 so I gave you both.
Choose the right one for your device.
================================================
You will also need to unlock your bootloader after flashing the RUU if you want to flash recovery.
Great to see that somebody can help him. Thx and thumbs up!
Send from my CoreDroid pocket rocket.
kgs1992 said:
Yup. Just put the phone into fastboot & flash.
You need the one that is for your device. PG13001 is Sensation XE & PG13000 is Sensation.
You said your mid is PG58130 so I gave you both.
Choose the right one for your device.
================================================
You will also need to unlock your bootloader after flashing the RUU if you want to flash recovery.
Click to expand...
Click to collapse
I have successfully flashed the RUU. The Hboot is now 1.27, but still no luck boot or getting to recovery.
Tried to flash custom recovery again. It was successfull but I can't get to it.
I think that partitions in nand /emmc/ are messed.
Some other ideas?
do
this
boot to recovery using this command
fastboot boot recovery.img
then if you booted up fine ..then flash a custom rom from it
ganeshp said:
do
this
boot to recovery using this command
fastboot boot recovery.img
then if you booted up fine ..then flash a custom rom from it
Click to expand...
Click to collapse
No, booted to the HTC logo and loop.
Filko84 said:
No, booted to the HTC logo and loop.
Click to expand...
Click to collapse
ok
did you flashed RUU with HTC-DEV unlocked bootloader ?
if yes ..then relock the bootloader ..fastboot oem lock and flash the RUU again
Also what is your cid ?
if possible ..post the output of this command (except IMEI)
fastboot getvar all

[Q] Any possible way for me to successfully flash an RUU?

here's what i did so far
factory reset on clockworkmod
phone will no longer boot
find out only solution is to flash stock ruu through fastboot
right ruu for my hboot and carrier not available
i have roger001 and hboot 1.13 bought from canada fido
i find out i can supercid to install ruu's from other countries
supercid procedure requires me to gain access to sd
i cannot access it (usb debugging not enabled im guessing, a i cant enable it because phone stuck in bootloop)
so now i cannot supercid
so i can not install any ruu without errors
i somehow broke clockworkmod cant get into it either
i need a way to install an ruu by just using the adp fastboot usb
help.... im kind of desperate
Seriously? Not even a single reply? Does that mean that there's absolutely nothing I can do? Give me SOME feedback please.
Can't you just fastboot flash a recovery, boot said recovery, mount usb storage in recovery and put a rom, and then flash that rom? Probably should clear data and system before flashing...
Sent from my HTC One S using xda app
lampel said:
Can't you just fastboot flash a recovery, boot said recovery, mount usb storage in recovery and put a rom, and then flash that rom? Probably should clear data and system before flashing...
Sent from my HTC One S using xda app
Click to expand...
Click to collapse
what recovery should i fastboot? i'm looking for something other than CWM
I use twrp. Never had an issue with it.
Sent from my HTC One S using xda app
lampel said:
I use twrp. Never had an issue with it.
Sent from my HTC One S using xda app
Click to expand...
Click to collapse
hmm it won't let me....
when i type into command and prompt "fastboot flash recovery twrp.img"
i get the following:
sending 'recovery' (8288 KB)... OKAY [ 1.474s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.158s
it won't even let me flash twrp
In your picture your bootloader is relocked. Did you re-unlock it?
sushiemaker said:
hmm it won't let me....
when i type into command and prompt "fastboot flash recovery twrp.img"
i get the following:
sending 'recovery' (8288 KB)... OKAY [ 1.474s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.158s
it won't even let me flash twrp
Click to expand...
Click to collapse
lampel said:
In your picture your bootloader is relocked. Did you re-unlock it?
Click to expand...
Click to collapse
wow, thank you so much, I forgot to re-unlock it...
now I have managed to get twrp installed, and I'm at the mounting stage, but my computer gives me the following message:
"You need to format this disk before you can use it. Do you want to format it?" and there is a "Format" or "Cancel" button I can press.
Should I click Format? I didn't want to act too hasty.
edit: ok i formatted it, now im in the process of finding a rom, any suggestions?
Trickdroid and energy are both great if you like sense roms.
Sent from my HTC One S using xda app

[Q] HTC One S can't pass the HTC logo

Hello
a few days ago I used "HTC ONE S AIO KIT" to install Jelly bean 4.2.2 on my HTC ONE S
I successfully installed the jelly bean and everything was fine
during the process, I created a backup from my phone in the ClockworkMod
today, I booted to ClockworkMod recovery > backup and restore > restore > and selected the backup file I created
the phone restarted and got stuck on the HTC ONE logo
I did everything I could in the past 2 hours, searching everywhere
even tried this command "fastboot flash boot "C:\...\boot.img"" but nothing worked - after doing this, the ClockworkMod gave me an error that said "can't mount /sdcard"
appreciate any help
Ok , I just updated to latest version of clockwork and still can not fix "can't mount sdcard" error
I have been doing this for 6 hrs now
can someone please help me ?
dnotoco some
jimlee2 said:
Ok , I just updated to latest version of clockwork and still can not fix "can't mount sdcard" error
I have been doing this for 6 hrs now
can someone please help me ?
Click to expand...
Click to collapse
install ruu original and unlok again is the most easiest for you
ZALACAYN2 said:
install ruu original and unlok again is the most easiest for you
Click to expand...
Click to collapse
thanks for the reply
I can't find the RUU for Fido/Rogers HTC ONE S
I searched for factory every where, I made a backup before but now I can't access the SD card to see if it it still there or not
jimlee2 said:
thanks for the reply
I can't find the RUU for Fido/Rogers HTC ONE S
I searched for factory every where, I made a backup before but now I can't access the SD card to see if it it still there or not
Click to expand...
Click to collapse
Well that is a pickle. Not having a RUU to fall back on.
Good news is you can still fastboot in bootloader.
So you can try different roms until one works. So at least you have a phone that works.
Push a rom to your phone
http://forum.xda-developers.com/showthread.php?t=1667929&highlight=adb+push
Flash a boot.img
http://forum.xda-developers.com/showthread.php?t=1752270&highlight=fastboot
fixing sd card mounting
http://forum.xda-developers.com/showthread.php?t=1630459
tivofool said:
Well that is a pickle. Not having a RUU to fall back on.
Good news is you can still fastboot in bootloader.
So you can try different roms until one works. So at least you have a phone that works.
Push a rom to your phone
http://forum.xda-developers.com/showthread.php?t=1667929&highlight=adb+push
Flash a boot.img
http://forum.xda-developers.com/showthread.php?t=1752270&highlight=fastboot
fixing sd card mounting
http://forum.xda-developers.com/showthread.php?t=1630459
Click to expand...
Click to collapse
I followed all these steps but I am not able to get it fixed
is it possible to help me via google talk or something? thanks
I get this error now when I try to flash a recovery
Code:
C:\Fastboot>fastboot flash recovery op
enrecovery-twrp-2.4.1.0-ville.img
sending 'recovery' (7820 KB)... OKAY [ 1.426s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.251s
I searched the forum and tried different methods to fix it but still no luck
I am going crazy over this problem
jimlee2 said:
I get this error now when I try to flash a recovery
Code:
C:\Fastboot>fastboot flash recovery op
enrecovery-twrp-2.4.1.0-ville.img
sending 'recovery' (7820 KB)... OKAY [ 1.426s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.251s
I searched the forum and tried different methods to fix it but still no luck
I am going crazy over this problem
Click to expand...
Click to collapse
Where did you download that recovery from?
Sent from my Nexus 7 using Tapatalk HD
khan.orak said:
Where did you download that recovery from?
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
from the original twrp site
Ok. Are you flashing the boot. img from the extracted rom zip that you are installing. I never used the c:/ blah blah. I always put the boot.img file in the same folder as adb and fastboot then with the phone in fastboot usb type fastboot flash boot boot.img in the command prompt on the computer. It sounds like you might have a bad recovery. Have you tried to flash a new recovery?
Sent from my HTC One using xda app-developers app

Categories

Resources