Last night I was using my phone and it rebooted randomly, and when it came back up it got stuck at the AT&T logo. I pulled the battery and restarted several times with no luck. Even left it out overnight and tried again.
I can get the phone into 3e recovery just fine. Will clearing the cache possibly help? What information is on the cache that will be cleared?
I don't have an original charger cable right now, so I can't try download mode. I'm trying to avoid using Odin again, because I would rather not lose the huge amount of new contacts and notes I have in my phone, it would be a major setback.
My phone has also had some issues with a device I/O error, and I haven't been able to back up my phone, so I'm not even sure if download mode would work for me.
Please help!
Edit: As I was about to write that I have had this problem before.... my phone was at the AT&T screen and it magically works again.
InfuseIssues said:
Last night I was using my phone and it rebooted randomly, and when it came back up it got stuck at the AT&T logo. I pulled the battery and restarted several times with no luck. Even left it out overnight and tried again.
I can get the phone into 3e recovery just fine. Will clearing the cache possibly help? What information is on the cache that will be cleared?
I don't have an original charger cable right now, so I can't try download mode. I'm trying to avoid using Odin again, because I would rather not lose the huge amount of new contacts and notes I have in my phone, it would be a major setback.
My phone has also had some issues with a device I/O error, and I haven't been able to back up my phone, so I'm not even sure if download mode would work for me.
Please help!
Edit: As I was about to write that I have had this problem before.... my phone was at the AT&T screen and it magically works again.
Click to expand...
Click to collapse
I'm sorry if your not able to save all your contacts but the only way to stop your phone from flashing samsung over and over again is to use odin. Or the case could be is that your power button is either stuck or messed up.
Related
Hello everyone,
I searched the forums for awhile but could not find a satifying answer for my question. So i am hoping you guys will have an answer for me.
First of all i would like to point out that i am not looking for an answer for how to unbrick the phone. There are several guides and hopefully when i get home i will be able to fix the problem. *Fingers crossed*
I did not have my Galaxy S for long. After getting it and installing KIES and updating my firmware the battery life what terrible so I rooted the phone and then installed Gingerbread 2.3.6 JVU. it worked like a charm.
Yesterday when I was playing with the CWM application, I decided that i was going to back up the phone and backed it up using the application. This morning one of my programs was acting weird and I decided to restore the backup I have done yesterday.
Upon going into applications and CWM, I chose the restore option and started the process. Everything was going smoothly, the phone was plugged in to the charger as well.
When the phone rebooted after the initial process I am stuck at logo screen. i can go into download mode (That is why I am hoping that I will be able to unbrick it) however that is as far as the phone goes. When I try to go into CWM Recovery mode, I am once again welcomed by the phone getting stuck at logo screen.
Does anyone have any idea as to why this might have happened? To avoid future problems is there any extra steps I should have taken before using the CWM restore function?
Thanks for the help.
m_hawkmoon said:
Hello everyone,
I searched the forums for awhile but could not find a satifying answer for my question. So i am hoping you guys will have an answer for me.
First of all i would like to point out that i am not looking for an answer for how to unbrick the phone. There are several guides and hopefully when i get home i will be able to fix the problem. *Fingers crossed*
I did not have my Galaxy S for long. After getting it and installing KIES and updating my firmware the battery life what terrible so I rooted the phone and then installed Gingerbread 2.3.6 JVU. it worked like a charm.
Yesterday when I was playing with the CWM application, I decided that i was going to back up the phone and backed it up using the application. This morning one of my programs was acting weird and I decided to restore the backup I have done yesterday.
Upon going into applications and CWM, I chose the restore option and started the process. Everything was going smoothly, the phone was plugged in to the charger as well.
When the phone rebooted after the initial process I am stuck at logo screen. i can go into download mode (That is why I am hoping that I will be able to unbrick it) however that is as far as the phone goes. When I try to go into CWM Recovery mode, I am once again welcomed by the phone getting stuck at logo screen.
Does anyone have any idea as to why this might have happened? To avoid future problems is there any extra steps I should have taken before using the CWM restore function?
Thanks for the help.
Click to expand...
Click to collapse
Maybe your backup was corrupted somehow. You could have tried wiping the dalvik cache after restoring your backup (before rebooting), but its too late now. Since you can get into download mode, you can easily fix the problem (your device is just soft bricked - nothing to worry too much about).
Theonew said:
Maybe your backup was corrupted somehow. You could have tried wiping the dalvik cache after restoring your backup (before rebooting), but its too late now. Since you can get into download mode, you can easily fix the problem (your device is just soft bricked - nothing to worry too much about).
Click to expand...
Click to collapse
The phone rebooted automatically. Did not give me the chance to do anything beforehand.
As you said the phone was soft bricked so when i got home that day i just fixed it. No problem. However I am really really into getting to find out how a 1 day old back up can get corrupted.
Hi guys, my phone is right borked and I hope someone can help me out. I've been searching forums all day and I find bits and pieces of advice that apply to parts of my situation, but haven’t found a fix yet.
I installed CyanogenMod on my Rogers Samsung G3 a couple months back. Everything has been going smoothly until last night when I installed an update.
The phone rebooted and got stuck on the Samsung splash screen with the blue cyanogen dude. I left it for 30 min and when I got back, it was still the same.
I took the battery out, turned it back on and ended up in the same spot. I took the battery out again, turned it on and left it over night. Same thing this morning.
On advice from this forum I put the phone in recovery mode. I thought I had TWRP, but Clockwork Recovery comes up.
I did a factory reset, and cleared the cache. Rebooted and still the same thing.
I tried to flash the ROM, but it doesn't work. The android dude just lies there, dead. Poor guy.
I plugged it into my computer but even though the computer makes the connection ‘cah-ching’ its not recognized. Through the recovery screen I tried unmounting and mounting everything, and mounting as usb and the computer still won’t pick it up. I uninstalled Kies, and the drivers for the phone and re installed everything. The driver pop up says MTP has failed.
Any suggestions?
Hey lads,
I got a really weird problem and I've tried nearly everything I can think of. I had EMUI 2.3(b121sp06) and I tried the online OTA update to b307 if I remember right(was automatically suggesting the update) and at the update screen it loaded to about 99% and then stopped. Said not to press power while on this screen but obviously it wasn't going to finish. So I reset the phone and it started the "recovery loop", so basically keep trying to apply the update. I had to flash CWM to break out and flashed the whole system by hand(recovery,system,boot,cache,cust and userdata img files) and it starts up but it keeps resetting and seemingly it's random. Android boots up, I don't touch the phone--> boom reset. Weird thing is it even does it in recovery.
If I really want to explain the problem it's like as if my finger got stuck on the power button(that naturally made me think that the button might be f*cked), but booting into fastboot and not having resets cleared my suspicion. What I also noticed is that every time it boots up it doesn't recognize the sim card and I have no signal or whatsoever.
Tried multi tool unbricking method -> doesn't work
Tried factory reset from stock recovery(had to be fast so it doesn't reset before) ->doesn't work
Tried wiping dalvik cache and factory reset from CWM ->doesn't work
Tried killing battery by letting it keep resetting -> battery drained, reset loop stopped ->put the phone on charger->reset loop started again
I have no f*cking clue how can I get out of this, will keep trying though. Any help is appreciated, thank you!
Hi
Did you try to remove the Sd Card ? Honor 6 reboot is often due to faulty SD Card.
Which model do you have ? L04 ?
B307 upgrade sure ?
Seb
Yes, that was my first idea, still does it though. I have the L02 and I'm not positive it was b307, but it started with 3, could be b303 if there is one.
I don't know for L02 but for L04 there is a Full ROM that you can flash with the three buttons method. (Vol+,Vol-, power and put the ROM in /dload folder on the SD card).
Maybe there is such thing for L02 ?
There is, but as I said the phone restarts even in recovery. It's like the phone restarts every 30 secs except for fastboot.
if it's not SD card or internal flash problem so, it seems to be hardware related to me (
Would make sense but it occurred only after I tried OTA. Would be really surprised if that killed that hardware :-/
xXPhoenixXx said:
Would make sense but it occurred only after I tried OTA. Would be really surprised if that killed that hardware :-/
Click to expand...
Click to collapse
Have u fixed the issue yet????
kamalnath93 said:
Have u fixed the issue yet????
Click to expand...
Click to collapse
Unfortunately not, I'm out of ideas, trying to negotiate with the seller to sort something out, I think the phone is beyond saving
Same thing happened with me. Don't have any solution. Have you fixed it?
xXPhoenixXx said:
Hey lads,
I got a really weird problem and I've tried nearly everything I can think of. I had EMUI 2.3(b121sp06) and I tried the online OTA update to b307 if I remember right(was automatically suggesting the update) and at the update screen it loaded to about 99% and then stopped. Said not to press power while on this screen but obviously it wasn't going to finish. So I reset the phone and it started the "recovery loop", so basically keep trying to apply the update. I had to flash CWM to break out and flashed the whole system by hand(recovery,system,boot,cache,cust and userdata img files) and it starts up but it keeps resetting and seemingly it's random. Android boots up, I don't touch the phone--> boom reset. Weird thing is it even does it in recovery.
If I really want to explain the problem it's like as if my finger got stuck on the power button(that naturally made me think that the button might be f*cked), but booting into fastboot and not having resets cleared my suspicion. What I also noticed is that every time it boots up it doesn't recognize the sim card and I have no signal or whatsoever.
Tried multi tool unbricking method -> doesn't work
Tried factory reset from stock recovery(had to be fast so it doesn't reset before) ->doesn't work
Tried wiping dalvik cache and factory reset from CWM ->doesn't work
Tried killing battery by letting it keep resetting -> battery drained, reset loop stopped ->put the phone on charger->reset loop started again
I have no f*cking clue how can I get out of this, will keep trying though. Any help is appreciated, thank you!
Click to expand...
Click to collapse
Its might be a battery problem Or power flex cable. Try to turn on the phone during charge
guys im facing the same problem now... waiting for any solutions
I have tried stop & uninstall some app
I've tried as quickly as I can when the phone (nokia x) is on, then I stop> uninstall I consider potentially cause this problem (facebook, whatsapp, uc browser) and then it managed to prevent the continuous restarts. but problems arise even though the application had me uninstall and then I restart the phone. and it is back again, I uninstalled the app that has remained with the error settings and restart repeatedly. who knows what else : '(
xXPhoenixXx said:
Hey lads,
I got a really weird problem and I've tried nearly everything I can think of. I had EMUI 2.3(b121sp06) and I tried the online OTA update to b307 if I remember right(was automatically suggesting the update) and at the update screen it loaded to about 99% and then stopped. Said not to press power while on this screen but obviously it wasn't going to finish. So I reset the phone and it started the "recovery loop", so basically keep trying to apply the update. I had to flash CWM to break out and flashed the whole system by hand(recovery,system,boot,cache,cust and userdata img files) and it starts up but it keeps resetting and seemingly it's random. Android boots up, I don't touch the phone--> boom reset. Weird thing is it even does it in recovery.
If I really want to explain the problem it's like as if my finger got stuck on the power button(that naturally made me think that the button might be f*cked), but booting into fastboot and not having resets cleared my suspicion. What I also noticed is that every time it boots up it doesn't recognize the sim card and I have no signal or whatsoever.
Tried multi tool unbricking method -> doesn't work
Tried factory reset from stock recovery(had to be fast so it doesn't reset before) ->doesn't work
Tried wiping dalvik cache and factory reset from CWM ->doesn't work
Tried killing battery by letting it keep resetting -> battery drained, reset loop stopped ->put the phone on charger->reset loop started again
I have no f*cking clue how can I get out of this, will keep trying though. Any help is appreciated, thank you!
Click to expand...
Click to collapse
Hey I tried to root my phone and its stuck in the same restart loop. I am trying to install some roms, CM or stock. U also try and let me know if it works.
Kuber.ksp said:
Hey I tried to root my phone and its stuck in the same restart loop. I am trying to install some roms, CM or stock. U also try and let me know if it works.
Click to expand...
Click to collapse
my phone is working only on charhing.. pufffff
snrtrt said:
my phone is working only on charhing.. pufffff
Click to expand...
Click to collapse
Did you follow the guide here?
Sent from my Honor 8 using XDA Labs
In the past my battery lost it's endurance pretty much. Furthermore I've read that a defective battery causes lots of weird behaviours on our Honor 6, which was the same to mine.
In my case a replacement of the battery worked well, to get my Honor 6 back to life:
https://www.youtube.com/watch?v=ceyzXavxFAw
It's not that difficult and lasts approx. 30-45 mins. Spare Batteries are available for 6 - 10 bucks on ebay or directly from the chinese internet stores.
Borg666 said:
In the past my battery lost it's endurance pretty much. Furthermore I've read that a defective battery causes lots of weird behaviours on our Honor 6, which was the same to mine.
In my case a replacement of the battery worked well, to get my Honor 6 back to life:
It's not that difficult and lasts approx. 30-45 mins. Spare Batteries are available for 6 - 10 bucks on ebay or directly from the chinese internet stores.
Click to expand...
Click to collapse
It's really important that we use original chargers for the health of our device.
So it started out that CM 12 kept shutting down on me, the phone would occasionally just power off. I tried restoring some of my TWRP backups but they seemed to be corrupted.
So I decided to try RSD and reflash the stock firmware and go back to 4.4. I let it flash and then when I booted up I kept getting a message saying that the phone was going into cool down mode, but the phone never actually got hot. So I decided to try and reflash the stock 4.4 firmware again in RSD. This time I watched the phone screen as it went through and just after the system image (#7 of 17) I would get a message in "RED" letters that reads "sp space is not enough". It would continue to flash the rest of the images and then reboot. And it would have the same problem with saying the phone is going into cool down mode and sometimes it would shut off, but the phone never gets hot.
I thought maybe I had a bad download / firmware image so I tried several 4.4 images including one directly from Motorola but I get the same message every time I flash the stock 4.4 ROM.
*While it is plugged into the computer the phone stays on, but once I disconnect from the computer it shuts down again.
So I thought I would try flashing TWRP and CM 11 and then CM12, but the phone will boot up and then shortly after boot up it will shut down.
I have spent hours looking for a solution online and I do find that there have been multiple reports of this same problem along with photos of the phone screen message, but I have not found an explanation or a solution.
Does anyone have any idea what the problem is or how to fix it?
morr22066 said:
So it started out that CM 12 kept shutting down on me, the phone would occasionally just power off. I tried restoring some of my TWRP backups but they seemed to be corrupted.
So I decided to try RSD and reflash the stock firmware and go back to 4.4. I let it flash and then when I booted up I kept getting a message saying that the phone was going into cool down mode, but the phone never actually got hot. So I decided to try and reflash the stock 4.4 firmware again in RSD. This time I watched the phone screen as it went through and just after the system image (#7 of 17) I would get a message in "RED" letters that reads "sp space is not enough". It would continue to flash the rest of the images and then reboot. And it would have the same problem with saying the phone is going into cool down mode and sometimes it would shut off, but the phone never gets hot.
I thought maybe I had a bad download / firmware image so I tried several 4.4 images including one directly from Motorola but I get the same message every time I flash the stock 4.4 ROM.
*While it is plugged into the computer the phone stays on, but once I disconnect from the computer it shuts down again.
So I thought I would try flashing TWRP and CM 11 and then CM12, but the phone will boot up and then shortly after boot up it will shut down.
I have spent hours looking for a solution online and I do find that there have been multiple reports of this same problem along with photos of the phone screen message, but I have not found an explanation or a solution.
Does anyone have any idea what the problem is or how to fix it?
Click to expand...
Click to collapse
I had tried everything I could think of and it appeared that there was a partition problem. The phone continued to shut down and would only stay on while connected to the PC. If it were a PC I would reformat and re-partition the drive but I did not want to risk a permanent brick by messing with it.
So, as a last ditch effort to try and get my phone functioning again I let it download and install system updates. The phone is now working again, it has not shut down at all and there have been no warning messages about cool down mode.
BUT, I am now on "4.4.4, SU-5-24, build 23.3.24 dated 10-27-14. Since my boot loader is unlocked I flashed TWRP but it would not not accept Super SU zip so I am no longer rooted.
I finished reading up on it in the forums and realize I am pretty much screwed as far as root goes. But at this point I don't even care anymore. I just need to get the phone functioning correctly.
*So, I am still having the problem with flashing stock and getting the "red" letter message after system image boots saying "sp space not enough". So long as it is hooked up to the computer it stays on and if it is downloading or installing an update it stays on and I never get a warning about cool down mode and it does not shut off, but once I disconnect from the computer it starts all over again. The phone boots up but at random intervals it still either gets a pop up message saying that it has gone into "cool down mode" or it shuts off. It is not doing it as often as before, but it is still doing it. Does anyone have any suggestions on whats causing it or how to fix it? It sounds like a software / firmware issue but I am not sure how to fix it.
*Update. The phone is still not functioning correctly. At times it will appear to work fine for hours with frequent to heavy use at times then suddenly it will start acting up, the phone will shut down randomly and when it reboots some of my settings have changed. The temperature is usually pretty low but once in a while after a shut down I will check the temp when I'm able to reboot it and it will be high. When it shuts down like that I usually have trouble getting it to boot up again unless I plug in the factory cable, either in the PC or just the wall charge then it seems to boot up fine and I can even reboot it but once it shuts itself down it doesn't want to start again unless I use the factory cable.
It really does sound like a software / firmware / partition problem but after multiple attempts to flash the firmware with RSD I continue to get the same error message at the end of the system flash and the phone continues to have problems. Does anyone have any suggestions?
Got me an xt1080 which I'm trying to restore to stock, and in both House of Motor and RSDlite 6.2.4 at some point during the system partition flash 'so space is not enough' as well. The phone is in perpetual bootloop, unless I use a 'Factory/power' cord and starting up in fastboot (eventually). Tried both 1FF and CFC fxz files, no luck.
I'm really hoping you guys can help me out here. This is an S7 I bought from a Best Buy when I visited the US in 2017, and I got the Unlocked version so I would be able to use it back in my home country. Unfortunately, this is the second time I've had trouble with it in a span of 4 months and the first time it was a hardware problem and ended up quite expensive to get fixed.
Today I was using my phone normally when I decided to use the Google instant translation to translate something on my computer screen. That caused my phone to freeze, restart, and then tell me I was using an unauthorized flash and it was going to be locked, or something like that. Even after restarting a few more times, the phone would never get past that screen. I proceeded to factory reset/cache reset and from then on the phone just got stuck in a boot loop.
I learned that the fix would be to flash the phone. After a lot of work I found the G930UUESACSI1-20190930144640 firmware (the XAA version, for Unlocked) and successfully used Odin 3.13 at the Download Mode screen to flash my phone. It then restarted, went back to the blue screen, started installing some updates, when it was 100% it restarted again. Unfortunately, the loop remained. Galaxy S7 logo first, then the Samsung logo, then it just repeats.
I have also tried turning the phone off with the Recovery screen shut down option (since I can't seem to be able to turn it off with the power button right now), wait a few minutes, then turn it back on. Nothing changed.
Please, does anyone have any insight into this? What else could I possibly try, or what could I be doing wrong? I really don't want to send it to repair yet again in such a short time.
Many thanks in advance.
gabeblack said:
I'm really hoping you guys can help me out here. This is an S7 I bought from a Best Buy when I visited the US in 2017, and I got the Unlocked version so I would be able to use it back in my home country. Unfortunately, this is the second time I've had trouble with it in a span of 4 months and the first time it was a hardware problem and ended up quite expensive to get fixed.
Today I was using my phone normally when I decided to use the Google instant translation to translate something on my computer screen. That caused my phone to freeze, restart, and then tell me I was using an unauthorized flash and it was going to be locked, or something like that. Even after restarting a few more times, the phone would never get past that screen. I proceeded to factory reset/cache reset and from then on the phone just got stuck in a boot loop.
I learned that the fix would be to flash the phone. After a lot of work I found the G930UUESACSI1-20190930144640 firmware (the XAA version, for Unlocked) and successfully used Odin 3.13 at the Download Mode screen to flash my phone. It then restarted, went back to the blue screen, started installing some updates, when it was 100% it restarted again. Unfortunately, the loop remained. Galaxy S7 logo first, then the Samsung logo, then it just repeats.
I have also tried turning the phone off with the Recovery screen shut down option (since I can't seem to be able to turn it off with the power button right now), wait a few minutes, then turn it back on. Nothing changed.
Please, does anyone have any insight into this? What else could I possibly try, or what could I be doing wrong? I really don't want to send it to repair yet again in such a short time.
Many thanks in advance.
Click to expand...
Click to collapse
You need to clear the cache after flashing to get out of the boot loop.
Use the download key combo to restart. As soon as the screen goes black move to Volume up+home+power.
In the recovery menu choose clear/ Wipe cache, then choose reboot.
I apologize for not updating this thread before when it was still recent. The fact is that I didn't manage to fix my phone; clearing the cache after flashing did nothing to stop the loop.
I ended up taking the phone to the people who have fixed it in the past and after more than one month, they gave up. So I got my phone back and I want to try to give it another go before I just sell it for parts.
Unfortunately, my phone has come back even worse. Now it has no Recovery Menu to speak of, at least none that I can access; after a few seconds of the blue text on the top saying that it's entering recovery mode, it then proceeds to a blue screen saying: "Security Error: This phone has been flashed with unauthorized software and is locked.". I can still access Download Mode.
I have attempted flashing a few firmwares that I believe should have worked with my SM-G930U. Odin listed the attempts as "pass" and, after restarting and going back to the Download screen, it says the binary is Official. However, after trying to restart the phone normally, it starts displaying the blue screen again, and then, after going to Download mode, the binary is reverted to "Custom".
I believe right now the order of the day is to get the recovery menu to work again so I can do all the cache cleaning that seems to be required after flashing firmware. Any ideas at all on how I should proceed? Is there something specific I should download to fix the recovery menu?
How many files are you flashing in Odin, is it just 1 file in the AP slot, or 4 files: AP, BL, etc.? Also, is your phone rooted?
Drunkpilot said:
How many files are you flashing in Odin, is it just 1 file in the AP slot, or 4 files: AP, BL, etc.? Also, is your phone rooted?
Click to expand...
Click to collapse
Never rooted, was using the phone legit before it froze and entered boot loop. I flashed all 4 files, multiple times.
Someone tried fixing my phone a few days after I replied to this thread and some progress seems to have been made, but now the phone cannot get past a black screen with a "SBL Error! rdx_init!" in red text, and "upload mode" in yellow text. Still cannot access Recovery Mode, but Download Mode still works.
I did a little Googling on rdx_init errors and it seems I need a firmware dump from another G930U or something like that...any ideas on how I can proceed?
Flash it with Eng Boot in all slots using patched Odin. Reboot to recovery and wipe it. Reboot system. Then root it with advanced adb root. Links for all of this are here in xda. Enjoy
STA1NL3SS said:
Flash it with Eng Boot in all slots using patched Odin. Reboot to recovery and wipe it. Reboot system. Then root it with advanced adb root. Links for all of this are here in xda. Enjoy
Click to expand...
Click to collapse
Sorry, I'm not an expert at this by any means, I'm not sure what files to get. So far I've found and downloaded the following:
S7_Oreo_Nougat_Adb_Advanced_Root_V10
S7_Oreo_Nougat_Adb_Advanced_Root_V12
S7_Oreo_Su_Binary_Only_ADB_Root
But I had no luck flashing any of these cause my binary is 10. Is there any more help you can provide me? I really don't know how to proceed
gabeblack said:
Sorry, I'm not an expert at this by any means, I'm not sure what files to get. So far I've found and downloaded the following:
S7_Oreo_Nougat_Adb_Advanced_Root_V10
S7_Oreo_Nougat_Adb_Advanced_Root_V12
S7_Oreo_Su_Binary_Only_ADB_Root
But I had no luck flashing any of these cause my binary is 10. Is there any more help you can provide me? I really don't know how to proceed
Click to expand...
Click to collapse
I thought I had one in my phone, but I don't. If you look at the thread where you downloaded the Root_V12, you will see it. It's near the end of the thread somewhere.