Database Info

[ADB] Trying to backup - Birck? Hope not

Hi! I was trying to backup my Orange Monte Carlo following a Portuguese tutorial but I'm stuck in the middle and I've got no help! Hope you can provide some! These are the steps I followed (translated)
1 - Install ADB Made Easy;
2 - Open cmd;
3 - Activate cellphone debug mode;
4 - Connect via usb (without mass storage) and install drivers if request [it was requested and i installed];
5 - Run adb devices, it should show your device [it did];
6 - Run adb reboot bootloader, your cellphone will boot in Fastboot, wich is an Android image without menus [correct until here];
7 - Run fastboot devices, your device yor a question mark(?) should show up (advance to next step), else you miss drivers [step not completed];
cmd says 'fastboot' is not recognized as a command. Now my phone is stuck connected to the computer with an adriod pick and I have no clue on what to do next!

Don't know where you were going with this but to reboot your phone just pull the battery ..
Not bricked

shanman-2 said:
Don't know where you were going with this but to reboot your phone just pull the battery ..
Not bricked
Click to expand...
Click to collapse
Thank you! Do you have any idea why the last command doesn't work? I believe it has something to do with file location... I'm trying to backup my Monte Carlo. Next steps were to "fastboot boot recovery.img" and then backup.

It should be in the platform-tools directory of the android-sdk. Verify that it's there...if so cd to that directory and it should work

I already fixed it for myself, thanks! Now I can't seem to be able to install clockwork!
Doing <<fastboot boot "C:\Users\R&J\Downloads\recovery.img">> reboots the device but doesn't enter recovery.
Doing <<fastboot flash recovery "C:\Users\R&J\Downloads\recovery.img">> , <<fastboot reboot>> and <<adb wait-for-device reboot recovery>> results the phone entering android's default recovery (no acess to backup feature).
Any way to help? Thank you!

The first command <<fastboot flash recovery "C:\Users\R&J\Downloads\recovery.img">> is trying to write the recovery.img you downloaded to a recovery partition on your device. It may not be overwriting the original recovery.
try changing permissions by doing
adb shell
su
chmod 777 /recovery
then try to flash again

Lol it seems like I have been luck enough to solve my own problems, I have sucessfully installed ClockworkMod Recovery 4.0.1.4 unofficial MoDaCo Edition using a bat file . Now I can't seem to find a way to flash recovery back to stock. I though this was an option inside the modded recovery. Any tips? Thanks again!
EDIT: I have the stock recovery file . God... this tutorials I'm folowing aren't that noob friendly...

I'm lost installing CMW

OMG yes i know im a newb but there is a first time for everybody for anything.
So i'm trying to unlock, root, install cwm and install custom roms but ive looked at all the instruction from many thread and a lot of them had missing steps
Anyways, i've downgraded from JB to 4.0.3, rooted, unlocked and now i'm trying to install CWM. So i installed android SDK and all tools, i've put recovery image in same folder as fastboot.exe, i've booted the tablet and selectied USB icon but wtf do i do now??
I'm basically here:
** FastBoot Method **
1) Install Android SDK
2) Download CWM Recovery image from the original thread and check the MD5 sum (don't skip MD5 check,is there to make sure the file is not corrupted)
3) Copy the downloaded file in the same directory as your fastboot.exe (unless you have /platform-tools in PATH then you can flash from anywhere)
4) Turn off your device and boot into fastboot mode (power on while holding volume down, then select the usb icon and hit volume up to confirm)
5) Plug the device into your computer
6) Run the following command via the command line:
fastboot -i 0x0B05 flash recovery recovery.img
fastboot reboot
Where do i get this command line?? is it command line from windows such as CMD?? cause if it is, i've tried it and nothing. Do i have to point to where is the recovery image?? Its in C:\Users\Patrick\AppData\Local\Android\android-sdk\platform-tools but i'm lost from that point, i'm not sure what command line i have to use, and how to set it up so i can tell it where to look.
Can anybody help me please?

polish_pat said:
OMG yes i know im a newb but there is a first time for everybody for anything.
So i'm trying to unlock, root, install cwm and install custom roms but ive looked at all the instruction from many thread and a lot of them had missing steps
Anyways, i've downgraded from JB to 4.0.3, rooted, unlocked and now i'm trying to install CWM. So i installed android SDK and all tools, i've put recovery image in same folder as fastboot.exe, i've booted the tablet and selectied USB icon but wtf do i do now??
I'm basically here:
** FastBoot Method **
1) Install Android SDK
2) Download CWM Recovery image from the original thread and check the MD5 sum (don't skip MD5 check,is there to make sure the file is not corrupted)
3) Copy the downloaded file in the same directory as your fastboot.exe (unless you have /platform-tools in PATH then you can flash from anywhere)
4) Turn off your device and boot into fastboot mode (power on while holding volume down, then select the usb icon and hit volume up to confirm)
5) Plug the device into your computer
6) Run the following command via the command line:
fastboot -i 0x0B05 flash recovery recovery.img
fastboot reboot
Where do i get this command line?? is it command line from windows such as CMD?? cause if it is, i've tried it and nothing. Do i have to point to where is the recovery image?? Its in C:\Users\Patrick\AppData\Local\Android\android-sdk\platform-tools but i'm lost from that point, i'm not sure what command line i have to use, and how to set it up so i can tell it where to look.
Can anybody help me please?
Click to expand...
Click to collapse
change directory to the folder the recover/fastboot is in, using the CMD on windows. So:
"cd C:\Users\Patrick\AppData\Local\Android\android-sdk\platform-tools"
make sure the recovery is called "recovery.img" and that its in the "platform-tools" folder alongside the fastboot.exe, then run the commands:
"fastboot -i 0x0B05 flash recovery recovery.img"
and
"fastboot reboot"

polish_pat said:
OMG yes i know im a newb but there is a first time for everybody for anything.
So i'm trying to unlock, root, install cwm and install custom roms but ive looked at all the instruction from many thread and a lot of them had missing steps
Anyways, i've downgraded from JB to 4.0.3, rooted, unlocked and now i'm trying to install CWM. So i installed android SDK and all tools, i've put recovery image in same folder as fastboot.exe, i've booted the tablet and selectied USB icon but wtf do i do now??
I'm basically here:
** FastBoot Method **
1) Install Android SDK
2) Download CWM Recovery image from the original thread and check the MD5 sum (don't skip MD5 check,is there to make sure the file is not corrupted)
3) Copy the downloaded file in the same directory as your fastboot.exe (unless you have /platform-tools in PATH then you can flash from anywhere)
4) Turn off your device and boot into fastboot mode (power on while holding volume down, then select the usb icon and hit volume up to confirm)
5) Plug the device into your computer
6) Run the following command via the command line:
fastboot -i 0x0B05 flash recovery recovery.img
fastboot reboot
Where do i get this command line?? is it command line from windows such as CMD?? cause if it is, i've tried it and nothing. Do i have to point to where is the recovery image?? Its in C:\Users\Patrick\AppData\Local\Android\android-sdk\platform-tools but i'm lost from that point, i'm not sure what command line i have to use, and how to set it up so i can tell it where to look.
Can anybody help me please?
Click to expand...
Click to collapse
Yes, command line is in your PC. The location of the fastboot.exe located in c:\android-sdk\platformtools (if you install from sdk).
On your PC, open CMD and navigate to the above directory where fastboot.exe is. Make sure your recovery.img in also copied to this same folder. Now you can execute the fastboot comand:
fastboot -i 0x0B05 flash recovery recovery.img
fastboot reboot
---------- Post added at 05:52 PM ---------- Previous post was at 05:48 PM ----------
buhohitr said:
Yes, command line is in your PC. The location of the fastboot.exe located in c:\android-sdk\platformtools (if you install from sdk).
On your PC, open CMD and navigate to the above directory where fastboot.exe is. Make sure your recovery.img in also copied to this same folder. Now you can execute the fastboot comand:
fastboot -i 0x0B05 flash recovery recovery.img
fastboot reboot
Click to expand...
Click to collapse
I think it's easier for you to download Voodoo OTA root keeper to preserve root, then upgrade to JB, then use OTA root keeper to restore root. After this you can install TWRP recover by download goomanager from the play store and install it, once you have twrp, you're home free.
Currently you are on ICS, becareful if you use a wrong version of cwm you could brick your device. Many ppl installed ICS cwm version then upgrade to JB without the right version and they bricked.

buhohitr said:
Yes, command line is in your PC. The location of the fastboot.exe located in c:\android-sdk\platformtools (if you install from sdk).
On your PC, open CMD and navigate to the above directory where fastboot.exe is. Make sure your recovery.img in also copied to this same folder. Now you can execute the fastboot comand:
fastboot -i 0x0B05 flash recovery recovery.img
fastboot reboot
---------- Post added at 05:52 PM ---------- Previous post was at 05:48 PM ----------
I think it's easier for you to download Voodoo OTA root keeper to preserve root, then upgrade to JB, then use OTA root keeper to restore root. After this you can install TWRP recover by download goomanager from the play store and install it, once you have twrp, you're home free.
Currently you are on ICS, becareful if you use a wrong version of cwm you could brick your device. Many ppl installed ICS cwm version then upgrade to JB without the right version and they bricked.
Click to expand...
Click to collapse
Thanks but I've already downgraded. I'll try what the guy above said thank you for the help
Sent from my SGH-I747M using Tapatalk 2

when you are in the fastboot folder, you have to press control & right click inside the folder, and you will see the option to open a terminal.
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD

Pat,
If it makes you feel any better I had a heck of a time with this myself.
Once I realized I had platform tools in a folder on my PC desktop with the command prompt
in it I was able to flash.
Gotta say it wasn't easy to figure out in bits and pieces.
Sent from the inside out...

Thanks guys, you've been REALLY helpful! I completely forgot about the shortcut to open cmd in a folder, and i'm not sure if you were wrong or its because im on windows 8 but its ctrl + shift + right click
EDIT: now i get a problem, it do all this and i get "waiting for device"
i tried different USB ports, same deal...any ideas?
EDIT: EDIT: tried all USB port but one, the last one i used did the trick, thanks for all!

I'm having this exact same problem but changing USB ports is not working for me and I tried everything else. Would it help if I tried a different computer?
Sent from my Galaxy Nexus using xda app-developers app

mnk0ota said:
I'm having this exact same problem but changing USB ports is not working for me and I tried everything else. Would it help if I tried a different computer?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
try to open CMD as Administrator.

buhohitr said:
...
I think it's easier for you to download Voodoo OTA root keeper to preserve root, then upgrade to JB, then use OTA root keeper to restore root. After this you can install TWRP recover by download goomanager from the play store and install it, once you have twrp, you're home free.
Currently you are on ICS, becareful if you use a wrong version of cwm you could brick your device. Many ppl installed ICS cwm version then upgrade to JB without the right version and they bricked.
Click to expand...
Click to collapse
I don't mean to threadjack, but this portion of your post caught my attention.
I just swapped a prime for an infinity. I rooted, installed rootkeeper, preserved root, upgraded to JB and restored root.
Are you saying I can install goomanager and update recovery without unlocking via the Asus tool?
If so, sweet!
Sent from my MB855 using Tapatalk 2

John Kotches said:
I don't mean to threadjack, but this portion of your post caught my attention.
I just swapped a prime for an infinity. I rooted, installed rootkeeper, preserved root, upgraded to JB and restored root.
Are you saying I can install goomanager and update recovery without unlocking via the Asus tool?
If so, sweet!
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
No. You will still have to unlock the bootloader to install a custom recovery, unfortunately.

Firebrazer said:
No. You will still have to unlock the bootloader to install a custom recovery, unfortunately.
Click to expand...
Click to collapse
Thanks... if it seems too good to be true it probably is.
Sent from my MB855 using Tapatalk 2

Need help preparing Xoom for official updates

Hey folks,
I´ve ran my MZ601 xoom on EOS builds over the last 1,5 years.
Obviously its unlocked and rooted. Currently its running CWM Recovery 4.0.0.4
Now I want to go back to stock to install the latest official updates to get the updated drivers for the UMTS radio/modem module.
After that I want to unlock and get root again to use any of the lastest custom Roms again.
Switching to a touch based recovery would be nice too.
I surfed around a bit and I´m rather confused which steps I need to perform in order to do this.
I guess I need to remove root and lock the bootloader again before I can install official updates ?
Could someone please toss me in the right direction? Maybe some step-by step list?

You'll presumably want Build H.6.1-38-1 for Retail Europe from here.
Returning to stock:
Extract the files from the link above to your adb/fastboot directory if you have one. If you don't have one I've uploaded them for you here.
Connect your Xoom to your PC then open command prompt from your adb folder. (Hold shift > right click on adb-fastboot folder > click Open Command Window Here)
Type adb devices and hit enter, if no devices are listed then ensure USB debugging is switched on in Settings > Development > and tick USB Debugging, then try again.
If it still doesn't appear then download Motorola USB drivers here and try again.
If fine then run:
adb reboot bootloader​Then run the following to flash the stock image:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock​
Flashing userdata.img is going to remove all your files so back everything up first.
This should unroot your Xoom anyway, not entirely sure if the lock is required to receive updates, but it's simple to unlock again.
Once booted and through initial setup you should receive several over the air updates. (I believe the stock image is Android 3.2)
Unlock:
Connect your Xoom again and open command window in the adb-fastboot folder as before.
Run:
adb reboot bootloader
fastboot oem unlock
fastboot reboot​You'll now be unlocked.
Install Touch Recovery and Root:
Next download ClockworkMod Touch recovery from here, rename it to just recovery.img for simplicity, and copy the image to the adb-fasboot folder.
Download Xoom Universal Root from here.
Copy that file to your sdcard.
Then run:
adb reboot bootloader
fastboot flash recovery recovery.img​(assuming you renamed it)
Once verified, reboot by holding Volume up and Power. (Keep connected to PC and keep command prompt open)
Important: When you see the Motorola logo wait about 3 seconds and hit volume down. You should see 'Android Recovery' in the top left corner, now press volume up to enter recovery.
From recovery go, Install zip from sdcard > choose zip > and select Xoom-Universal-Root.zip
Important: After the root flashes do not reboot.
Run:
adb remount
adb shell mv /system/recovery-from-boot.p /system/recovery-from-boot.p.old
adb shell mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.old​Then select reboot in ClockworkMod recovery and boot as normal.
If you are unable to use adb in recovery, then you can enable this through Windows by doing the following:
Whilst in recovery and connected to your PC, open Device Manager, find your Xoom, usually under 'Other devices'.
Then right click on your Xoom > Update driver software... > Browse my computer for driver software > Let me pick from a list of device drivers on my computer > Pick your Xoom (either one if there's two shown)
Windows should confirm the driver installed then adb should work in recovery.
Finally, run:
adb reboot recovery​If ClockworkMod touch recovery is still there then all is good!
Hopefully I've made sense! Any questions, just ask.
Repeat of downloads:
Download Motorola USB Drivers (Device Manager) here.
Download ClockworkMod Touch recovery here.
Download Xoom Universal Root here.

Wow, what a detailed guide
Thank you sir

No problem!
Let me know how it goes, hopefully shouldn't have any problems.

Resetting worked great :good:
Right now I´m in an OTA marathon
all that unlock, root and recovery stuff sounds familiar so I don´t expect any problems.
Thanks so far :good:

alecbond said:
From recovery go, Install zip from sdcard > choose zip > and select Xoom-Universal-Root.zip
Important: After the root flashes do not reboot.
Run:
adb remount
adb shell mv /system/recovery-from-boot.p /system/recovery-from-boot.p.old
adb shell mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.old​Then select reboot in ClockworkMod recovery and boot as normal.
Finally, run:
adb reboot recovery​If ClockworkMod touch recovery is still there then all is good!
Click to expand...
Click to collapse
Ok, so this is not working
after I flash touch recovery and do thta reboot thing I can enter touch recovery, thats fine.
Flashing universal root, fine.
THEN,
adb remount
adb shell mv /system/recovery-from-boot.p /system/recovery-from-boot.p.old
adb shell mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.old
gives me error since in recovery mode there ist no adb connection
Whatever when I choose to reboot the system, recovery warns me that it will get overwritten by boot and ask me to disable this.
Shall I do this?
EDIT: Nevermind, I decided to be a little brave and just confirmed that message.
Now touch clockwork seems to be persistent and I´m a happy Xoomer again

Sorry, I had meant to reply during my lunch break.
Edit: Realised the time on the second of your posts, so wouldn't have been much help on my lunch anyway
Well I believe I just learned something new!
Either that or I'd forgotten it asked.
I assume it disables the action rather than deletes those files.
My method was just so you can use the reverse rename in future to re-enable the overwrite on boot.
In future, not that you'll necessarily ever need this information, you can enable adb in recovery through windows by doing the following
When in recovery and connected to your PC, open Device Manager, find your phone, usually under 'Other Devices'.
Then right click > Update driver > Browse my computer > Let me pick from list > Pick your phone (either one if there's two shown)
Should confirm driver installed then adb should work.
I didn't include the above previously as I couldn't remember having to do it personally.
Glad to hear all is well though!

alecbond said:
You'll presumably want Build H.6.1-38-1 for Retail Europe from here.
Returning to stock:
Extract the files from the link above to your adb/fastboot directory if you have one. If you don't have one I've uploaded them for you here.
Connect your Xoom to your PC then open command prompt from your adb folder. (Hold shift > right click on adb-fastboot folder > click Open Command Window Here)
Type adb devices and hit enter, if no devices are listed then ensure USB debugging is switched on in Settings > Development > and tick USB Debugging, then try again.
If it still doesn't appear then download Motorola USB drivers here and try again.
If fine then run:
adb reboot bootloader​Then run the following to flash the stock image:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock​
Flashing userdata.img is going to remove all your files so back everything up first.
This should unroot your Xoom anyway, not entirely sure if the lock is required to receive updates, but it's simple to unlock again.
Once booted and through initial setup you should receive several over the air updates. (I believe the stock image is Android 3.2)
Unlock:
Connect your Xoom again and open command window in the adb-fastboot folder as before.
Run:
adb reboot bootloader
fastboot oem unlock
fastboot reboot​You'll now be unlocked.
Install Touch Recovery and Root:
Next download ClockworkMod Touch recovery from here, rename it to just recovery.img for simplicity, and copy the image to the adb-fasboot folder.
Download Xoom Universal Root from here.
Copy that file to your sdcard.
Then run:
adb reboot bootloader
fastboot flash recovery recovery.img​(assuming you renamed it)
Once verified, reboot by holding Volume up and Power. (Keep connected to PC and keep command prompt open)
Important: When you see the Motorola logo wait about 3 seconds and hit volume down. You should see 'Android Recovery' in the top left corner, now press volume up to enter recovery.
From recovery go, Install zip from sdcard > choose zip > and select Xoom-Universal-Root.zip
Important: After the root flashes do not reboot.
Run:
adb remount
adb shell mv /system/recovery-from-boot.p /system/recovery-from-boot.p.old
adb shell mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.old​Then select reboot in ClockworkMod recovery and boot as normal.
Finally, run:
adb reboot recovery​If ClockworkMod touch recovery is still there then all is good!
Hopefully I've made sense! Any questions, just ask.
Repeat of downloads:
Download Motorola USB Drivers (Device Manager) here.
Download ClockworkMod Touch recovery here.
Download Xoom Universal Root here.
Click to expand...
Click to collapse
Hey, you did a great guide! Would you mind if I put that in the FAQ Thread?
"We think so supersonic and we make our bombs atomic" - Eagle Fly Free (Helloween)
Sent from my Nexus 10 using Tapatalk HD

XxLordxX said:
Hey, you did a great guide! Would you mind if I put that in the FAQ Thread?
Click to expand...
Click to collapse
No problem, I'd be honored!

Guide to fix TWRP or CWM bootloop

This is how i fix my TF300TG stuck on recovery. I hope the steps descried below will help.
Long story, short:
For some reasons, seems like the WIPE command from TWRP and CWM recovery screw the partitions.
No partitions or microSD card can be mounted.
The tablet is now booting only in recovery mode or in fastboot mode (the screen with three icons - RTK, Android and WIPE) instead of Android.
IMPORTANT:
If your tablet reboot in fastboot mode DONT WIPE IT AGAIN! Just skip step 4.
First of all, MAKE SURE YOR BATTERY IS CHARGED!
Recharge your tablet for at least two hours.During the flashing process the tablet doesn`t charge.
Use the original Asus USB cable that came with the tablet or a high quality replacement cable. Cheap cables can and will cause problems.
Use a laptop or desktop with known good USB ports. If you have problems, try a diferent computer, some USB chips can cause troubles.
Disable the antivirus or screensaver, sleep etc...
1.Download these files:
from ASUS website: http://www.asus.com/Tablets_Mobile/ASUS_Transformer_Pad_TF300TG/#support
Drivers&Tools, on the OS tab select Android
click on Utilities and download latest version of ASUS PC Sync (you will need this for drivers)
click on Firmware and download the lastest available (you will need this for BLOB file)
Minimal ADB and Fastboot: http://d-h.st/gbx
install ASUS PC Sync and Minimal ADB and Fastboot (on fastboot installer check the box that make a shortcut to desktop)
unzip the firmware file downloaded from ASUS site
you will get a second zip file, unzip this one too
the folder unzipped from the second one contain a file called blob
copy or move the folder to the root of your drive C: or D: or whatever drive letter you have
2.Installing drivers:
connect your tablet to PC
you will get a message about Windows couldnt find driver bla...bla, ignore it and keep your tablet plugged
IMPORTANT: even if you previously installed ASUS PC Sync or other drivers and Windows recognize your tablet, you still need to change the driver.
right-click on My Computer-Properties and click Device Manager
find the Asus Android device - should be with an exclamation mark on it (the driver is not installed sign)
right-click on it and choose:
Update Driver Software..., Browse my computer for driver software, Let me pick from a list of device drivers on my computer, Have disk, Browse
go to C:\Program Files or Program Files (x86), ASUS, ASUS Android USB Drivers, Android and select android_winusb.inf
Asus Android Composite ADB interface will appear in the list of device drivers - don`t hit next yet!
uncheck Show Compatible Hardware and select Asus Android Bootloader Interface from the list, now hit next
3.ADB mode:
open Minimal ADB and Fastboot from desktop - from this point, keep it open
type: adb devices - and you should see some numbers under the List of device attached - thats your tablet
if you can`t see the tablet, try this command: adb start-server
4.Booting to "fastboot":
there are two ways to do this:
a) from adb window type: adb reboot bootloader
or
b) reset and hold vol-down (didn`t work for me, but maybe will work for someone else)
the three icons will appear on screen - NOW YOU ARE IN FASTBOOT MODE
if none of the above work try this:
in adb window type: adb reboot
wait until the tablet enter in recovery menu and type in adb window:
adb shell dd if=/dev/zero of=/dev/block/mmcblk0p3
adb reboot bootloader
5. Flasing the blob
the credits for this part goes to buster99. He is the one who figured out the right commands for formatting partitions and flashing back the OS
here is his post: http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
here we go, one at the time in adb window:
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
fastboot -i 0x0B05 flash system x:\your blob folder\blob (here you enter the path to your blob file, must end with blob, to point at the file)
fastboot -i 0x0B05 reboot
THE FLASH SYSTEM COMMAND WILL TAKE SOME TIME
be pacient and wait until the progress bar is 100% full on the tablet and you get the command prompt back in the adb window.
After reboot, the Android is back on.
Cheers and good luck!!

A big thank you alexhosu,
several months ago that my tablet was blocked, but I still kept hope
a solution would be found. I'm really happy for you and thank you again for sharing.
Long live XDA

me too
Thanks from me too; was enjoying 5.0 (timduru) on my TF300 when I went to upgrade and idiotically managed to get into a TWRP bootloop(interrupted a format of \data and then used 'wipe' from the boot screen by mistake...)
Your solution has saved my tablet
Am now carefully reinstalling Katkiss

Thanks
This saved my (veggie) bacon too, something went wrong when flashing new ROM (most likely user error - e.g. my fault). Tablet woud go into an eternal boot wouldn't finish booting, nandroid recovery did the same. Used this technique and have a working stock ROM from which I intend to reinstall TimDuru's Lollipop.
Thanks again

Followed the instructions.. Worked well, but getting error 963 when installing/updating anything in Play Store. Seems to be related to storage permissions. Some users are suggesting using format instead of erase. What's the difference? Could that help.
I did factory reset, reflashed and used fix permissions in TWRP but no luck...
alexhosu said:
This is how i fix my TF300TG stuck on recovery. I hope the steps descried below will help.
Click to expand...
Click to collapse

Big thanks from me.
I killed my tablet with an accidental restore to factory defaults while in cm12, an got stuck in an endless bootloader boot loop.
my tablet came back too life at the end of section 4 after adb shell dd if=/dev/zero of=/dev/block/mmcblk0p3.
although getting adb to talk to the tablet was a fluke.
I just kept trying to send "adb shell dd if=/dev/zero of=/dev/block/mmcblk0p3" while the tablet was loading (boot looping)

6 months of believing my tablet was dead, after letting CM12 do its own update thing, and now, thanks to the above instructions, I'm back online and its working with the stock rom.
Thank you so much for this. No idea why I couldn't find these instructions before, then I just gave up, back in business now!

Thanks a lot for your guide, this is what helped me fortunately unbrick my device, i was stuck in a boot loop with a broken recovery

Another tablet saved. Know your work is appreciated.

i have the same problem, the system doesn't pass the ASUS logo, i tired to log into fastboot (reset + volume down) and i was able to see the three icons but adb doesn't recognize my device. i see the drivers are correctly installed but no working adb. Any help is highly appreciated.

ajeevlal said:
i have the same problem, the system doesn't pass the ASUS logo, i tired to log into fastboot (reset + volume down) and i was able to see the three icons but adb doesn't recognize my device. i see the drivers are correctly installed but no working adb. Any help is highly appreciated.
Click to expand...
Click to collapse
Did you try entering "fastboot devices" or just "adb devices"? adb wont find your device in the bootloader, but using fastboot commands should unless it truly is not connecting for some reason.

Act32.97 said:
Did you try entering "fastboot devices" or just "adb devices"? adb wont find your device in the bootloader, but using fastboot commands should unless it truly is not connecting for some reason.
Click to expand...
Click to collapse
yeah Fastboot devices worked but it was not letting me flashing the rom, when i push the blob file it says 'sending' and stays in the same state for days.

ajeevlal said:
yeah Fastboot devices worked but it was not letting me flashing the rom, when i push the blob file it says 'sending' and stays in the same state for days.
Click to expand...
Click to collapse
I would try moving the blob to the root of the C drive and try the 7th command "fastboot -i 0x0B05 flash system C:\blob" just to make sure sometime of file permission type issue isn't happening on the pc side. Other than that the only kind of issue I think it could be would have to be the connection with the drivers, although if erasing the partition's works fine, I don't really see what could be going on.

I followed all the steps and delete, but when loading the file update.blob I get this error:
C: \ Users \ mikel> C: \ Users \ mikel \ Android \ android-sdk \ platform-tools \ fastboot flash system update.blob
error: can not load 'update.blob'
Can someone help me out?

TF300T KissKat
Theziggy said:
This saved my (veggie) bacon too, something went wrong when flashing new ROM (most likely user error - e.g. my fault). Tablet woud go into an eternal boot wouldn't finish booting, nandroid recovery did the same. Used this technique and have a working stock ROM from which I intend to reinstall TimDuru's Lollipop.
Thanks again
Click to expand...
Click to collapse
Hey, I know that I'm a couple years late on this. But, I was just given a Asus Transformer TF300T, and attempted to install the Kisskat custom rom. I unlocked the device with little issues. Rooted with little issues. But when it came to flashing the rom. I get his error saying that "no MD5 file found" and holds it there for a couple of minutes. Then gives me the failed install. My only option is to boot into recovery and restore the stock JB 4.2. If you could point me in the right direction, I would greatly appreciate it. I've searched the forum for someone with a similar issue, and couldn't find it. I hope that I'm not alone on this one. It would kill me to be stuck with the stock rom.

Hi i made a format data from TWRP recovery, and now i am in a recovery loop and got error of mount partitions, i can access to recovery and the screen with 3 icons, but when i plug to my pc it shows as uknown usb, i install the drivers but dosent reconose as a fastboot device, in minimal adb when i write fastboot devices the result is empty pleace help me.

Muito obrigado!
I know this must seem odd, being such an old thread and all but, after several years adding apps and changing ROMs on my wife's TF300T (my gift!) only these past weeks I had the need to search for help, after installing nougatella 7.1, which I did with success, only to stumble on endless logo loops and loading processes without conclusion. Don't get me wrong, the ROM looks great and it wasn't that hard to install but, after two weeks or so, gave me this problem and after correcting it and installing again the ROM, I got in trouble again...
After some five hours googling and trying different stuff, I finally found this thread and twenty minutes ago (around 2:AM) my ASUS returned to its (Jellybean) life!
Alexhosu, thank you so very much for such a detailed, yet easy to follow guide and, if you happen to come to Portugal on vacation and visit Setúbal, I'll have a bottle of Moscatel waiting for you!
Many thanks to Droidbound (who got me off the hook the first time the tablet went nuts!), and also Kevinthefixer, Gtanner00 and some other very inteligent, patient and thoughtful people, and all the guys who shared their difficulties and in a way helped me find the people with the fix.
For anyone interested in trying this method, I would say that it's paramount that you should stick exactly with what is asked and should pay real atention to what is the correct ROM update to download and use. If anyone needs help with translation to Portuguese, just say so.
Again, thank you so much for this!
JMonteiro

alexhosu said:
This is how i fix my TF300TG stuck on recovery. I hope the steps descried below will help.
if none of the above work try this:
in adb window type: adb reboot
wait until the tablet enter in recovery menu and type in adb window:
adb shell dd if=/dev/zero of=/dev/block/mmcblk0p3
adb reboot bootloader
5. Flasing the blob
Click to expand...
Click to collapse
Thanks for your help :good: and I'm sorry for my basic English, but here is another tablet saved. Your instructions were clear and my tablet is working.
I hope this information helps, based in the next link (user sszyman): https://forum.xda-developers.com/showthread.php?t=2275035&page=9
in which he recommends using the following commands too:
adb shell dd if=/dev/zero of=/dev/block/mmcblk0p2
adb shell dd if=/dev/zero of=/dev/block/mmcblk0p8
adb shell dd if=/dev/zero of=/dev/block/mmcblk0p1
With these commands and "adb shell dd if=/dev/zero of=/dev/block/mmcblk0p3" I was able to solve my Bootloop problem.
Honestly I don't know which of the commands worked, I used all several times.

[Q] GooManager doesn't download and install TWRP

Hi
My problem is GooManager download the last version of twrp but it block on "download is now starting"
How can i resolve this problem ?
My TF700 is root and in Jelly Bean build 10.6.1.14.8
Thanks for the help

mamadeus said:
Hi
My problem is GooManager download the last version of twrp but it block on "download is now starting"
How can i resolve this problem ?
My TF700 is root and in Jelly Bean build 10.6.1.14.8
Thanks for the help
Click to expand...
Click to collapse
You can't, goo manager no longer supports installing recoveries.....
The only way to flash a custom recovery if you don't have one installed is from a PC using fastboot or using the dd method if you have root via a terminal:
Save the twrp recovery blob file from the TeanWin site to the same folder as fastboot.exe and rename it to twrp.blob
Then from a cmd prompt with your device in the bootloader and connected to the PC via usb type
fastboot -i 0x0B05 flash recovery twrp.blob
fastboot -i 0x0B05 reboot bootloader
OR
In a Terminal Emulator in android with a rooted device
Save it to the root of your /sdcard directly (internal memory only) and rename it to twrp.blob
Launch terminal emulator or connect to your computer and open an adb shell, then type the following:
su
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4
Then reboot to complete installation.

new version of Goo Manager fixes this
I couldn't imagine that Goo Manager would no longer install recoveries. An update just occurred for the app (2.1.3), and it's now working for me, though I have a different device. I hope it works for you too!