Related
Hi,
Do anyone knows if there is a real advantage in creating a partition in the phone sd card, [sd-ext]?
I read that it solves this error: E:can't mount /dev/block/mmcblk1p2
(File Exists).
But, does the phone has a real gain when you format and create a new sd-ext partition?
Thanks,
If you have a ROM that has data2ext or app2ext then you'll notice a speed increase as well as a drop in usage on your phone's internal memory. I have a MT3GS and with data2ext I went from an 1100 in quadrant to a 1600
dbzfanatic said:
If you have a ROM that has data2ext or app2ext then you'll notice a speed increase as well as a drop in usage on your phone's internal memory. I have a MT3GS and with data2ext I went from an 1100 in quadrant to a 1600
Click to expand...
Click to collapse
Thanks for the quick reply,
When you say, data2ext or app2ext, are you saying app's that can be installed in the ex-sd card?
Can I do that in cwm or there is a better way?
Cheers,
Data2ext and app2ext are ROM add-ons that enable you to either move the entire data partition to your sd-ext or just all of your installed apps. If you use data2ext your apps are automatically moved since they're stored in the data partition. You would flash them the same way you flash a ROM if the mods are available for your phone. Just search the forum for your phone if you want to know if you have those options.
Thanks mate,
I installed move2sd enabler.
So I can to move all the apps to the sd-ext partition I created?
I'm going to search for that.
I honestly haven't used move2sd so I'm not sure how that works. It should be a separate script like I mentioned before.
I created a new partition in clockworkmod 512mg 32mg swap.
The phone restarts, all seems ok, but when I restart again in CWM and select format sd-ext partition, it says that I don't have one.
I'm trying to find a way to fix this issue but until now nothing...
Check if you have a blocksize of 4096 (there's a command, don't know it offhand) and make sure it's actually an ext partition, it might be a different type or may be the wrong type of ext, such as ext2 when it needs ext3 or vice versa.
Already did the check,
su
sf
And there's no new partition created.
CWM erased all the data inside my card but did not create a new partition.
Do you thing it's because I have lagfix on with ext4 part type?
Honestly I have no idea. I used the parted script/command from adb to do my partitioning. Maybe try that or try converting to ext2?
Thanks,
I'm going to try and take a look in to that.
I see a lot of posts that say to use RA-Recovery with sdk adb but does it works with an SGS?
I don't know honestly, you'll need to look in the SGS forum and see if a Ra recovery is posted there. Parted works with adb and can be added to any ROM regardless of recovery menu.
From what I saw Ra-recovery is not for sgs's.
I still didn't saw any posts that explains how to do a sd-ext new partition for a Samsung Galaxy S, only for HTC's and other phones.
If you happen to find anything that explains how to do this for a SGS be a friend and tell me ok?
Thanks
A friend of mine has an SGS so I'll ask him and see what he's done with his. I know he rooted and flashed CM to it but i'm not sure if he did anything else like data2ext or anything like that.
Thanks mate,
I'll be waiting for your reply...
I am struggling to get Stock ROM and A2SD working.
I fully wiped the phone and installed the latest RUU and all the updates.
I then installed CWM 5028, superuser and then Dark Tremors A2SD.
I then partitioned the SD Card using CWM, but everytime when I load up the phone it doesn't recognise sd-ext.
I tried a2sd check but it says sd-ext isn't mounted so I can't do a2sd reinstall.
I have partitioned the card so many times in CWM, trying with no swap, with swap, 512Mb sd-ext, 1024Mb sd-ext, formating sd-ext after partitioning, tried a different sd card...
Nothing seems to work...
I even tried putting the SD card in my PC and using GParted to change the sd-ext partition to ext2 from CWM ext4, but that didn't help...
I've had this working before so I'm not sure what I'm doing wrong. Does it need a specific version of hboot?
CHACHA PVT SHIP S-OFF
HBOOT-1.13.0000
MICROP-0557
RADIO-7.51.35.19
Feb 7 2012,18:20:56
Hmm, I'm using Link2SD with an ext4 partition on CM9. Haven't tried DarkTremor on this one, but afaik I used it on SuperOSR, with the same partition.
It might be something with the stock kernel, but I'm not sure. There was a thread around here regarding Dark Tremor's; you should check that one as well.
Alex C. said:
Hmm, I'm using Link2SD with an ext4 partition on CM9. Haven't tried DarkTremor on this one, but afaik I used it on SuperOSR, with the same partition.
It might be something with the stock kernel, but I'm not sure. There was a thread around here regarding Dark Tremor's; you should check that one as well.
Click to expand...
Click to collapse
Yeah I did think it might be the kernel from what I've been reading. But I first did this setup before there was any custom ROMs available when the phone first came out after s-off with xtc clip, so that worked with the stock rom then.
What I remember from before is when you open up CWM and go to mounts and storage, if it is working correctly then it should be mounted in there without you having to manually asking it to mount it.
Mine is never mounted in there, but mounting it manually seems to work...
I can read the partition in windows using ext explorer
I did read some install notes that says you should mount sd-ext in CWM before installing A2SD in CWM. I might try that and see if it makes a difference, but I'm pretty sure the install script does all that...
Maybe I should try Link2SD? I did look for A2SD+ but I couldn't find a download link for that.
I'm currently running bhundven's herring CM9 with no kernel modifications and CWM 6. I find that the internal storage for this phone is very low and only holds a small amount of applications, especially since many apps seem to not want to install at all (about 3/4 of the time I try to install things, I get either "Package invalid" or "Insufficient space available", which is extremely annoying and might be a separate problem).
Is there any way that I can get sd-ext to work on this phone with this setup? I'd rather not switch kernels (I'd love to get TWRP recovery but the flashable doesn't work for me and I don't want to switch kernels).
cpkelley94 said:
I'm currently running bhundven's herring CM9 with no kernel modifications and CWM 6. I find that the internal storage for this phone is very low and only holds a small amount of applications, especially since many apps seem to not want to install at all (about 3/4 of the time I try to install things, I get either "Package invalid" or "Insufficient space available", which is extremely annoying and might be a separate problem).
Is there any way that I can get sd-ext to work on this phone with this setup? I'd rather not switch kernels (I'd love to get TWRP recovery but the flashable doesn't work for me and I don't want to switch kernels).
Click to expand...
Click to collapse
I haven't used it but this app should do the trick.
https://play.google.com/store/apps/details?id=eu.codlab.int2ext
Let me know if it works.
I prefer Mounts2SD, which lets you completely configure things. I was running PACman with cache and dalvik offloaded which worked quite well. And free is a good price.
https://play.google.com/store/apps/details?id=com.spazedog.mounts2sd
That seems like it just switches the internal and external storage, not making an ext partition on the SD card. But can things like this really be done through an app? I thought these things had to be done through init.d or build.prop scripts.
Sent from my SGH-T959V using xda app-developers app
The app creates an init file. Or so it appears. Like I said I don't use it. It seems that raze does and I'd defer to him here. Either his app or the one I linked should work fine.
Thanks (given) to both of you. And any ideas on what else might be causing the invalid packages when downloading from the play store? It happens even though I have much more free app space than I would need (eg. I had 119 MB of free space and a 30 MB app download failed).
EDIT: Just tried using Mounts2SD, but it couldn't find the sd-ext partition. Do I need to create that manually, and how?
Sent from my SGH-T959V using xda app-developers app
Titanium backup had a feature to integrate app updates into the Rom.
Sent from my SAMSUNG-SGH-I547 using xda app-developers app
Another way is to create ext4 partition (about 1G is usually enough) on you SD card with free MiniTool Partition Wizard and then use Link2SD to link apps/dalvik to this partition. I've been using it like this for a long time and it works fine. There are plenty of guides on the Web how to do that.
I used CWM or TWRP to create the sd-ext partition. You need to create that first somehow... if MiniTool Partition Wizard will do it without wiping the sdcard, that's better than recovery though.
My method was boot to recovery, mount sdcard, copy everything to computer HD, unmount sdcard, partition sdcard with 2 GB sd-ext (because I wanted lots of space, but I'd probably cut it down to 1 GB next time), mount sdcard, copy everything back from computer HD, unmount sdcard, reboot to system. Then launch Mounts2SD, pick what format you want the sd-ext in (FAT or ext2 are the fastest, but you can take ext3 or ext4 if you're not going to just disable the safety features) and what stuff you want moved over.
Edit: Just found this link, which I haven't used but which explains how to do the sd-ext with MiniTool... apparently MiniTool DOES still wipe the partitions though, so you may as well just use CWM/TWRP and make your life easier.
http://forum.xda-developers.com/wik...#using_MiniTool_Partition_Wizard_Home_Edition
Theraze said:
I used CWM or TWRP to create the sd-ext partition. You need to create that first somehow... if MiniTool Partition Wizard will do it without wiping the sdcard, that's better than recovery though.
Click to expand...
Click to collapse
MiniTool will wipe the sd card to create the new partition as well. I wish there was a way to do it without wiping the card but there is not. So back that stuff up first.
Madein Cyberspace said:
MiniTool will wipe the sd card to create the new partition as well. I wish there was a way to do it without wiping the card but there is not. So back that stuff up first.
Click to expand...
Click to collapse
I used GParted to partition my SD card. NO WIPING. Move, resize, add partitions.
nevkuril said:
Another way is to create ext4 partition (about 1G is usually enough) on you SD card with free MiniTool Partition Wizard and then use Link2SD to link apps/dalvik to this partition. I've been using it like this for a long time and it works fine. There are plenty of guides on the Web how to do that.
Click to expand...
Click to collapse
Yes, but our herring kernel does not support EXT4 partition, I tried it myself
and it didn't work. I had to create EXT3 which is supported by almost all kernels.
Eh, my results varied. Worked fine for me with ext4. And worked fine for my wife as well.
Rebel_X said:
Yes, but our herring kernel does not support EXT4 partition, I tried it myself
and it didn't work. I had to create EXT3 which is supported by almost all kernels.
Click to expand...
Click to collapse
The OP says he's running CM9. That's what I'm running but I use Proton kernel as CM9 kernel has a video bug, and ext4 partition works just fine for me. Strange if Bryan really removed ext4 support, it's just a line in the config file.
Successfully made the partitions last night but my phone won't mount the SD card anymore. Was trying ext3, I'll try ext2 and ext4.
EDIT: Fixed the problem, changed my partition to ext2 and set both partitions to "Primary" (not sure which one did the trick).
cpkelley94 said:
Successfully made the partitions last night but my phone won't mount the SD card anymore. Was trying ext3, I'll try ext2 and ext4.
Click to expand...
Click to collapse
Make sure that you make the first partition Primary/FAT32. This will be your normal SD card. Just take about 1GB of space from it at the end. Then make second partition Primary/ext4 with size to the end of the card. You can try ext2/3 but I don't think it is really necessary.
MiniTool will NOT wipe your partition if you do it right.
dsexton had a guide posted on how to do it.
Is it worth making a swap partition? If I remember correctly it significantly degrades the life of the SD card (and microSD's are delicate as it is), and I don't know if it would significantly increase performance.
cpkelley94 said:
Is it worth making a swap partition? If I remember correctly it significantly degrades the life of the SD card (and microSD's are delicate as it is), and I don't know if it would significantly increase performance.
Click to expand...
Click to collapse
I also created 128MB swap partition, not supported too and not mounted.
I tried to used swapper2 app from the market, but it says not supported by
kernel. Now I lost that space till I feel motivated to format or repartition the SD
card again.
I am using hefe kernel btw on AOKP milestone 6-5.
No swap.
Sent from my SGH-T959V using xda app-developers app
Hi Friends
Yesterday I flashed my HTC Explorer with CM10.1 Beta 5 ([DEV][ROM][JDQ39E][4.2.2] CyanogenMod 10.1.2 | BETA#5 | 25/07/13 | WILD FOR THE NIGHT) . But with this build my phone is not mounting the second partition of size 2GB (total 16gb card) which I have created from recovery menu. I have tried with the Mini partition tool on windows for FAT32 too, but still its not mounting my either Link2SD, mount2SD or by the kernel (About Phone -> System partion).
Please help me as without mounting the 2nd partition I can not install any other app as very very less space is available after CM 10.1.
Thank you.
Use Int2sd+ for cm10.1
You can Google it & download
Note: you when flash ROM when mount system, data,sd-ext..and make ext3 partition
thekoolanie said:
Use Int2sd+ for cm10.1
You can Google it & download
Note: you when flash ROM when mount system, data,sd-ext..and make ext3 partition
Click to expand...
Click to collapse
Its still not working. I wonder, if we can do so many things in CM, why can not we simply integrate the script in to the rom itself. I'm damn sure 100% of HTC explorer users must be searching for a way to increase the internal memory of the phone also now a days sd cards are damn cheap.
There is a link
http://androidicablog.wordpress.com...rnal-memory-script-for-4-2-1-romsgalaxy-mini/
You can see my memory in this attachment
There is a link
http://androidicablog.wordpress.com...rnal-memory-script-for-4-2-1-romsgalaxy-mini/
You can see my memory in this attachment
---------- Post added at 06:04 AM ---------- Previous post was at 05:55 AM ----------
There is a link
http://androidicablog.wordpress.com...rnal-memory-script-for-4-2-1-romsgalaxy-mini/
You can see my memory in this attachment
mount2sd NOT mounted SD-EXT on Samsung Galaxy Y Pro Duos
hi,
I have a rooted Samsung GT-B5512. Init.d and mountd2sd installed.
Android 2.3.6, kernel: 2.6.35.7.
Trying to move a lot to SD card, including some system files since this is a low end device with little memory. Even with apps like link2sd after a large number of apps the int storage was full :/ therefore trying the mount2sd but it doesn't want to mount the sd partition.
The card (16GB) is formatted as follow: 13 GB FAT32, 1 GB EXT3.
In the section Storage\External mount2sd says Not mounted.
the busybox is installed, the startup script too. Driver is set to EXT but most of fields are grayed out.
Please help.
xda_keevvee said:
hi,
I have a rooted Samsung GT-B5512. Init.d and mountd2sd installed.
Android 2.3.6, kernel: 2.6.35.7.
Trying to move a lot to SD card, including some system files since this is a low end device with little memory. Even with apps like link2sd after a large number of apps the int storage was full :/ therefore trying the mount2sd but it doesn't want to mount the sd partition.
The card (16GB) is formatted as follow: 13 GB FAT32, 1 GB EXT3.
In the section Storage\External mount2sd says Not mounted.
the busybox is installed, the startup script too. Driver is set to EXT but most of fields are grayed out.
Please help.
Click to expand...
Click to collapse
remove any sd. ext you made..create new ext partition using recovery and try..
shubhojit89 said:
remove any sd. ext you made..create new ext partition using recovery and try..
Click to expand...
Click to collapse
thank you, I was struggling with this alone for too long ...
Did as you say but same results. Mount2sd doesn't see the SD-EXT.
FYI - I did not install the ClockworkMod,just run it from the Android recovery shell. Anyway it was able to successfully create partitions on the SD.
Don't know if that matters ...
Do you want me to post any screens, or log files (actually mount2sd log is empty, even though debug mode is checked).
Marek
xda_keevvee said:
thank you, I was struggling with this alone for too long ...
Did as you say but same results. Mount2sd doesn't see the SD-EXT.
FYI - I did not install the ClockworkMod,just run it from the Android recovery shell. Anyway it was able to successfully create partitions on the SD.
Don't know if that matters ...
Do you want me to post any screens, or log files (actually mount2sd log is empty, even though debug mode is checked).
Marek
Click to expand...
Click to collapse
ya u can post the screenshots..
vice ereafe
See enclosed. The log file is empty but check the debug
xda_keevvee said:
See enclosed. The log file is empty but check the debug
Click to expand...
Click to collapse
create partition through recovery and make it ext4 coz ext4 is mounted easily..
shubhojit89 said:
create partition through recovery and make it ext4 coz ext4 is mounted easily..
Click to expand...
Click to collapse
My ClockWordMod (CWM-6102) does only ext3 (did not find setting to change type). I'm not sure is there higher CWM for my cell.
I've made the ext4 using MiniTool Part under Windows but it looks like the Mount2SD does not support ext4 in my case. I can choose ext2, ext3, fat, auto but the ext4 is dimmed (could it be Android kernel related?).
Tried then also sd-ext and FAT, still Not Mounted ...
xda_keevvee said:
My ClockWordMod (CWM-6102) does only ext3 (did not find setting to change type). I'm not sure is there higher CWM for my cell.
I've made the ext4 using MiniTool Part under Windows but it looks like the Mount2SD does not support ext4 in my case. I can choose ext2, ext3, fat, auto but the ext4 is dimmed (could it be Android kernel related?).
Tried then also sd-ext and FAT, still Not Mounted ...
Click to expand...
Click to collapse
change to philz recovery.. i m using it for months.. it supports ext4.. ext4 is easily mounted.. i use ext4 and i never faced any kinda issue you r facing..
shubhojit89 said:
change to philz recovery.. i m using it for months.. it supports ext4.. ext4 is easily mounted.. i use ext4 and i never faced any kinda issue you r facing..
Click to expand...
Click to collapse
it was kernel thing (BTW - there are very few recovery binaries for this phone, CWM is for example mostly in use as a temporary executed, loaded each tip from ZIP).
I have updated kernel to this:
http://forum.xda-developers.com/showthread.php?t=1913349
and things automatically got mounted (even made a partition using my PC and working same good)
thanks for participation
I am new with data2sd.
I read from another discussion that in order to use data2sd on my TF700 tablet I have to create two partitions on my external SDcard (partition1 = FAT32, while the secod partition is ESXT4). I am using Samsung SDXC 64GB class 10 card. For some reason I could not format the EXT4 successfully. I have tried MiniTool partition and GPart USB and Disk boot.
With latest GPart I receive error "Input/Output errro during write on /dev/mmcblk0" with header message "Libpart Bug Found!".
I tried to leave the first partition empty then format the 2nd partition EST4 as well but it made no different.
Finally I ask a frined to format the card from his Apple laptop and he said he did it. However I am still unable to detect the 2nd paritition.
This time the Gpart softare has shown a Warning message as shown in the attachment.
Can anyone help me? Thanks
ciscozest said:
I am new with data2sd.
I read from another discussion that in order to use data2sd on my TF700 tablet I have to create two partitions on my external SDcard (partition1 = FAT32, while the secod partition is ESXT4). I am using Samsung SDXC 64GB class 10 card. For some reason I could not format the EXT4 successfully. I have tried MiniTool partition and GPart USB and Disk boot.
With latest GPart I receive error "Input/Output errro during write on /dev/mmcblk0" with header message "Libpart Bug Found!".
I tried to leave the first partition empty then format the 2nd partition EST4 as well but it made no different.
Finally I ask a frined to format the card from his Apple laptop and he said he did it. However I am still unable to detect the 2nd paritition.
This time the Gpart softare has shown a Warning message as shown in the attachment.
Can anyone help me? Thanks
Click to expand...
Click to collapse
I have heard that MiniTool has corrupted a few users SD when they use it. If it is still new, you can get the exchange from where you bought it.
Otherwise, you could try this to see if it works out for you.
You can use a card reader and plug it in your window pc. You need to reformat your SD with extfat. If everything works, then you can use gparted to format two partions, fat32/ext4, to use for data2sd.
If it is still not working, you can go to the SD card associate website and download the format4.0 tool. You need to install the software on your pc and use it to format your SD. In the pull down option, you need to select the "overwrite" option in the menu and hope that they can repartition your allocation table in order for your SD to work again. Good luck... :fingers-crossed:
Finally made EXT4 partition successfully but still fail on DATA2SD
I finally able to format my second partition with EXT4 using TWRP software. However my TF700 tablet is unable to mount the EXT4 or read it under storage menu. I read another forum saying the SDXC UHS-1 card cannot be used for my tablet. Is this true?
Can anyone confirm this? Thank you
EXT4 success but DATA2SD is still failing
Hi, thanks for your comment and advice.
I finally able to format my second partition with EXT4 using TWRP software. However my TF700 tablet is unable to mount the EXT4 or read it under storage menu. I read another forum saying the SDXC UHS-1 card cannot be used for my tablet. Is this true?
Can anyone confirm this? Thank you
Note: When flashing using that4 DATA2Sd kernel, the screen hung at Asus logo. Tried using Hunsbuah kernel too but no luck. I am using CROMI-X 4.7.0.
Is it a micro SD you are trying to use? The full sized SD in the dock won't work for data2sd.
You must use gparted to format the card. There is no other way.
Take the microSD out and check if it boots normally. You may have corrupted your card with Mini Tool...
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
ciscozest said:
Hi, thanks for your comment and advice.
I finally able to format my second partition with EXT4 using TWRP software. However my TF700 tablet is unable to mount the EXT4 or read it under storage menu. I read another forum saying the SDXC UHS-1 card cannot be used for my tablet. Is this true?
Can anyone confirm this? Thank you
Note: When flashing using that4 DATA2Sd kernel, the screen hung at Asus logo. Tried using Hunsbuah kernel too but no luck. I am using CROMI-X 4.7.0.
Click to expand...
Click to collapse
I am currently using an exactly the same SD as your. It is working for me. Something may be wrong your end..
Got the partition working and NOW is the mounting problem...
Finally i got my second partition working. The formatting worked after I recreated the partition table using gPART.
Now my ASUS TF700 could not mount the second partition of my Samsung card. It only read th first primary partition. After flashing ROM with CROMI-X 5.0 and select that_4 kernal (DATA2SD), it loop at initial Asus boot logo and then reboot repeatly and endlessly. Is there any step I am missing here? Thanks for any help here.
LetMeKnow said:
I am currently using an exactly the same SD as your. It is working for me. Something may be wrong your end..
Click to expand...
Click to collapse
am using MicroSDXC UHS-1 card 64GB
Hi,
I am using Samsung 64GB microSDXC UHS-1 card and I inserted it into the tablet directly. The tablet could read first FAT32 partition but not the second one (EXT4). I could see the second partition using Mini Partition Tool as well as GPART though.
I am thinking hard now on how to let my TF700 read the EXT4 second partition on my card. ANy idea? Thank you
sbdags said:
Is it a micro SD you are trying to use? The full sized SD in the dock won't work for data2sd.
You must use gparted to format the card. There is no other way.
Click to expand...
Click to collapse
Hi,
I've the same problem. I tried everything but my TF700 don't like the ext-partition.
SD-Ext Size : -1 MB on the first page of the installer is normal?
flatlenin said:
Hi,
I've the same problem. I tried everything but my TF700 don't like the ext-partition.
SD-Ext Size : -1 MB on the first page of the installer is normal?
Click to expand...
Click to collapse
Can you tell us all the steps and what tools did you use during the data2sd process? It is helpful with more details.
LetMeKnow said:
Can you tell us all the steps and what tools did you use during the data2sd process? It is helpful with more details.
Click to expand...
Click to collapse
I try
1. I bought a SanDisk Extreme with 32 GB
2. I have used gparted to partion my SD Card. First with 4 GB Fat32. Second with Ext4. Both are primary.
3. I flashed the new TRWP 2.6.1.0 on my Tab.
4. Reboot the recovery an flash mount-data2sd.zip
5. flashed the Cromi 5.0.1 odex and use _thats data2sd Kernel
6. I flashed data2sd-jb42-intmedia-that1.zip
My Tab runs with this but i can't use the Ext4 form my SD-Card.
Pics go to the internal storage.
regards Erik
flatlenin said:
6. I flashed data2sd-jb42-intmedia-that1.zip
My Tab runs with this but i can't use the Ext4 form my SD-Card.
Pics go to the internal storage.
Click to expand...
Click to collapse
That's what "intmedia" does.
The ext4 partition should contain your apps and app data.
_that said:
That's what "intmedia" does.
The ext4 partition should contain your apps and app data.
Click to expand...
Click to collapse
Thanks _that :good:
But one problem remains:
Wipe cache and davilik doesn't work correctly. After the wipe my tab don't update the apps during the boot of the rom.
flatlenin said:
Thanks _that :good:
But one problem remains:
Wipe cache and davilik doesn't work correctly. After the wipe my tab don't update the apps during the boot of the rom.
Click to expand...
Click to collapse
You have to use the mount-data2sd.zip from the data2sd thread to temporarily switch your recovery to use /data on the microSD card.
LetMeKnow said:
I am currently using an exactly the same SD as your. It is working for me. Something may be wrong your end..
Click to expand...
Click to collapse
Hi, do you mind giving me tips on how to solve my problem? I am thinking if my tablet could not read the 2nd partititon on extenral MicroSD card, I will not get DATA2SD works no matter how. Please correct me if I am wrong. I have also installed mount-data2sd.zip from TWRP 2.6 and then flash Cromi 5.0 ROM using built-in DATA2SD kernel by that_4. the outcome is still negative.
Thanks
ciscozest said:
Hi, do you mind giving me tips on how to solve my problem? I am thinking if my tablet could not read the 2nd partititon on extenral MicroSD card, I will not get DATA2SD works no matter how. Please correct me if I am wrong. I have also installed mount-data2sd.zip from TWRP 2.6 and then flash Cromi 5.0 ROM using built-in DATA2SD kernel by that_4. the outcome is still negative.
Thanks
Click to expand...
Click to collapse
May I ask how do you try to read your ext4 SD? Did you flash _that's data2sd zip file? I don't recall that I have ever gotten any problems with the exactly SD that you have...
Edit: If you use _that data2sd kernel, then you don't need to flash _that's data2sd zip file.. However, it is not a bad idea to flash it again to see how your tablet responses..
LetMeKnow said:
May I ask how do you try to read your ext4 SD? Did you flash _that's data2sd zip file? I don't recall that I have ever gotten any problems with the exactly SD that you have...
Edit: If you use _that data2sd kernel, then you don't need to flash _that's data2sd zip file.. However, it is not a bad idea to flash it again to see how your tablet responses..
Click to expand...
Click to collapse
Hi, the way I checked is when I goto storage option, i could only see the internal and first partition on my external SDcard so I assume the 2nd partition is not recognized? Also using ES Explorer, I clicked "MicroSD" option and it only showed the content in the first SDcard partition.
These are the steps I did:
1- From TWRP 2.6.0, I flash a separate mount-data2sd.zip
2 - still in TWRP, once the above flashing complete, I flash CROMI-X 5.0 deodex and select that_4 data2sd kernel
3 - wipe cache and dalvik cache
4 - reboot system
5 - I got message there is no OS in the internal parition/disk do you want to continue? Since I got no choice, I clicked yes then the screen hang at initial Asus logo screen.
Luckily I have TWRP backup prior so I managed to restore my complete /data, /system and /boot or recovery.
Plz help and advice my misunderstanding or missing steps here. Thanks
ciscozest said:
Hi, the way I checked is when I goto storage option, i could only see the internal and first partition on my external SDcard so I assume the 2nd partition is not recognized? Also using ES Explorer, I clicked "MicroSD" option and it only showed the content in the first SDcard partition.
These are the steps I did:
1- From TWRP 2.6.0, I flash a separate mount-data2sd.zip
2 - still in TWRP, once the above flashing complete, I flash CROMI-X 5.0 deodex and select that_4 data2sd kernel
3 - wipe cache and dalvik cache
4 - reboot system
5 - I got message there is no OS in the internal parition/disk do you want to continue? Since I got no choice, I clicked yes then the screen hang at initial Asus logo screen.
Luckily I have TWRP backup prior so I managed to restore my complete /data, /system and /boot or recovery.
Plz help and advice my misunderstanding or missing steps here. Thanks
Click to expand...
Click to collapse
First, can you tell me what rom and kernel you are running? I don't think that you can see your ext4 on your external sd unless you are using data2sd.. For now, you can use gparted to see if there is a second partition with ext4.. I need to understand your system a little more in order to help you set up data2sd..
LetMeKnow said:
First, can you tell me what rom and kernel you are running? I don't think that you can see your ext4 on your external sd unless you are using data2sd.. For now, you can use gparted to see if there is a second partition with ext4.. I need to understand your system a little more in order to help you set up data2sd..
Click to expand...
Click to collapse
hi, I am using Cromi-X 5.0, TWRP 2.6.0, Samsung SDXC UHS-1 class 10 64GB MicroSD card. No keyboard dock used. Thanks