Guys the fix was included in the original script and hence this thread as of now is no longer active.
for further queries please go to the original script thread here
Dark Passenger said:
Hi INT2ext4+ works on android 4.2.1.(Device : Galaxy Fit GT-S5670)
ScreenShots.
and for those dying for to use it here is the fixed script (yes its a flashable zip)
Credits::good:
vvFiCKvv : for finding the error and showing how to fix it.
dk75 : for sharing it with us.
dark passenger : for posting the fixed zip here(just modded original zip) and testing.
if you appreciate this please press thanks on all these guys posts.:good:
Click to expand...
Click to collapse
I've installed S2E on thos ROM. Need I reinstall CM 10.1? Where is tutorial for this?
ZmisiS said:
I've installed S2E on thos ROM. Need I reinstall CM 10.1? Where is tutorial for this?
Click to expand...
Click to collapse
tutorial added to first post. no just remove the revert all settings in the app(and hope they fit into /data) and delete the script its something s2e like the script will automatically move all apps and dalvik cache and everything except /data/data to /sd-ext nothing to configure.
Dark Passenger said:
Hi INT2ext4+ works on android 4.2.1.(Device : Galaxy Fit GT-S5670)
ScreenShots.
and for those dying for to use it here is the fixed script (yes its a flashable zip)
Credits::good:
vvFiCKvv : for finding the error and showing how to fix it.
dk75 : for sharing it with us.
dark passenger : for posting the fixed zip here(just modded original zip) and testing.
if you appreciate this please press thanks on all these guys posts.:good:
How to Install guide
1.remove all app2sd scripts from init.d folder inside /system/etc you should have two scripts only smothing like 90userinit and 00banner or module if any other script that has 2ext or app in it please delete them.(only app2sd scripts matter no other script)
2.uninstall all related apps for the same scripts.
3.reboot into recovery.
4.under mount & storage(or something similar) chose mount /system & /data and /sd-ext
5.go back and choose install zip
6. select Fixed-Int2ext4+.zip and flash.
7 go back to mount & storage and unmount /data & /sd-ext.
8.format /sd-ext from the same menu.
reboot and enjoy.
Note : this will work for only ext 4 partition(if you format sd-ext using cwm 5 its ext 4) will upload int2ext+ soon if requested.
Click to expand...
Click to collapse
This is works for me. Thanks.
ZmisiS said:
This is works for me. Thanks.
Click to expand...
Click to collapse
how is your internal storage showing 1 GB space??
pl share wat n how did u do dat.
Rohit02 said:
how is your internal storage showing 1 GB space??
pl share wat n how did u do dat.
Click to expand...
Click to collapse
I've partitioned the SD Card on FAT32 and ext4. For ext4 I made 1 GB. My SD Card is of 16 GB. Rest is FAT32.
The first make partition FAT32 and then ext4.
Rohit02 said:
how is your internal storage showing 1 GB space??
pl share wat n how did u do dat.
Click to expand...
Click to collapse
it mounts your /sd-ext partition as /data hence internal storage is the size that your /sd-ext is.
also its easier to partition with cwm and keep swap as 0.
Help me!
why I can't mount sd-ext?
PrimZaap said:
why I can't mount sd-ext?
Click to expand...
Click to collapse
What do you use, CWM 5, CWM 6 or Amon-RA?
ZmisiS said:
What do you use, CWM 5, CWM 6 or Amon-RA?
Click to expand...
Click to collapse
CWM5
PrimZaap said:
CWM5
Click to expand...
Click to collapse
Is it partition SD Card O.K.? If yes, try CWM6 or Amon-RA.
PrimZaap said:
CWM5
Click to expand...
Click to collapse
first try installing script without mounting /sd-ext but follow all other steps(mainly mount /system & /data flash script & later unmount /data and format /sd-ext).
If this doesnt work(I seriously doubt it won't still) it means that the /sd-ext partition is corupt(many reasons) so do this flash amon ra and choose fix sd-ext partition the n flash cwm 5 again and format sd-ext partition.
still doesnt work(really still doesnt ?!?!?!) post here the full porblem you face then and if you tried both these solutions.
Good luck.
Dark Passenger
Dark Passenger said:
first try installing script without mounting /sd-ext but follow all other steps(mainly mount /system & /data flash script & later unmount /data and format /sd-ext).
If this doesnt work(I seriously doubt it won't still) it means that the /sd-ext partition is corupt(many reasons) so do this flash amon ra and choose fix sd-ext partition the n flash cwm 5 again and format sd-ext partition.
still doesnt work(really still doesnt ?!?!?!) post here the full porblem you face then and if you tried both these solutions.
Good luck.
Dark Passenger
Click to expand...
Click to collapse
In Amon-RA I've formated sd-ext in the way that I went to on wipe sd-ext. It works for me. I've flashed script with Amon-RA.
ZmisiS said:
Is it partition SD Card O.K.? If yes, try CWM6 or Amon-RA.
Click to expand...
Click to collapse
I have Amon-RA,, and I have a new problem. how to format/sd-ext in Amon-RA?
PrimZaap said:
I have Amon-RA,, and I have a new problem. how to format/sd-ext in Amon-RA?
Click to expand...
Click to collapse
I'm already write.Format sd-ext in Amon-RA to go to Wipe/wipe sd-ext.
First Post Updated added INT2EXT and also added a little description for each script.
Amon-ra recovery is good but i personally preffer cwm 5 and really dont trust cwm 6.
Dark Passenger said:
First Post Updated added INT2EXT and also added a little description for each script.
Amon-ra recovery is good but i personally preffer cwm 5 and really dont trust cwm 6.
Click to expand...
Click to collapse
With CWM 5 I have problem with restore. With Amon-RA I have not had any problems.
ZmisiS said:
With CWM 5 I have problem with restore. With Amon-RA I have not had any problems.
Click to expand...
Click to collapse
since I had a bad experience with cwm 6 i dont trust that and personally dont like amon-ra so cwm 5 is the best for me.
but each his own right.
Dark Passenger said:
since I had a bad experience with cwm 6 i dont trust that and personally dont like amon-ra so cwm 5 is the best for me.
but each his own right.
Click to expand...
Click to collapse
Yes, I agree. I'm only mentioning their experiences.
Problem with Amon-RA is it that he don't flashing custom ROM on stock ROM.
Thanks for your help,, and it work
Related
Hello,
I made this port some time ago with little help from seo, but didn't make a new thread for it. Now I want more people to look at it and use it because it have many new futures and make flashing ROMs more fun
So this is actually the amon_RA latest recovery for Nexus One.
What I made is just to port it to work with our phones.
Features :
Reboot system now :: reboot your phone
USB-MS Toggle :: enable/disable USB mass storage (use when the phone is connected to your PC)
Backup/Restore
Nand backup :: Make a selective Nandroid backup
Nand restore :: Restore a Nandroid backup
Backup Google proprietary system files :: Makes a backup of the Google proprietary system files in /cache/google
Restore Google proprietary system files :: Restores the Google proprietary system files from /cache/google
Flash zip from sdcard.
Choose zip from sdcard :: Flash a zip update file from any (sub)-directory on your sdcard
Toggle signature verification :: Toggles the signature verification for zip files.
Wipe
Wipe ALL data/factory reset :: wipes /data + /cache + entire ext partition + all apps installed on your sdcard (froyo a2sd).
Wipe /data :: wipes /data.
Wipe /cache :: wipes /cache.
Wipe /sdcard/.android_secure :: wipes all apps installed on your sdcard (froyo a2sd).
Wipe /sd-ext :: wipes the entire ext partition on your sd (if present).
Wipe Dalvik-cache :: wipes the dalvik-cache located in /cache + /data + /sd-ext is present.
Wipe battery stats :: reset the battery calibration.
Wipe rotate settings :: reset the sensor calibration.
Partition sdcard
Partition SD :: Interactive SD partitioning
Repair SD:ext :: Repair the ext partition
SD:ext2 to ext3 :: Convert ext2 to ext3
SD:ext3 to ext4 :: Convert ext3 to ext4
Mounts
(Un)Mount /system
(Un)Mount /cache
(Un)Mount /data
(Un)Mount /sd-ext
(Un)Mount /sdcard
Other
Fix apk uid mismatches :: Does extacly that
Move recovery.log to SD :: Moves the recovery log file to your sdcard. (Use when you want more detailed recovery log information)
Power off :: Powers off your phone
Click to expand...
Click to collapse
Use the trackball (up+down) to navigate through the menu, press the trackball to select items. Use the Volume-down key to go back to a previous menu.
Download:
recovery-RA-magic+-v2.2.1-bladyle.img
MD5sum: 98A8CAE41C0A7D2AEF69A4F62F2F6475
Install:
From fastboot:
Code:
Copy recovery-RA-magic+-v2.2.1-bladyle.img to a location where fastboot can find it.
Boot your phone into fastboot mode (power on while holding the back)
Connect your phone via usb to your pc/mac/...
fastboot devices (to make sure that fastboot "sees" your phone)
fastboot flash recovery recovery-RA-magic+-v2.2.1-bladyle.img
You can use RadioSwitchGUI_v4 too!
If you want just to try it:
Code:
fastboot boot recovery-RA-magic+-v2.2.1-bladyle.img
Thanks and credits go to :
Amon_RA
seo
carz12
sorry. ask a stupid question.is this recovery for 32a, 32b or both?
Sent from my Dream/Sapphire using XDA App
smartvincent said:
sorry. ask a stupid question.is this recovery for 32a, 32b or both?
Sent from my Dream/Sapphire using XDA App
Click to expand...
Click to collapse
sorry i forgot to mention this...it is for 32a only
I can try to make 32b version too but I need someone to test it.
Bladyle said:
sorry i forgot to mention this...it is for 32a only
I can try to make 32b version too but I need someone to test it.
Click to expand...
Click to collapse
If you make a 32b version i'd gladly test it
I've been using this recovery for some time and it runs perfectly. And it works in both new and old radio. Great work!
Note: It's features and not futures.
using this recovery too and im really happy with this! thank you Bladyle! great job!
thank you guys
BTW I need some testers to PM for 32B/MyTouch 1.2 port
I'm also using this on my Old Radio Magic, haven't tested on new radio yet
it works well
New radio, excellent work
Sent from my Sapphire using XDA Premium App
works like a charm with new radio
Bump. This amazing recovery need to be on the first page!
kanttii said:
Bump. This amazing recovery need to be on the first page!
Click to expand...
Click to collapse
Thanks mate!
This is my default recovery on my device.
Bladyle said:
Thanks mate!
This is my default recovery on my device.
Click to expand...
Click to collapse
For me too. When you first posted it, I didn't dare to try, but after a few days I did..and since then I have been using this all the time! A week ago I tried CWM to see if a ROM could be flashed through that, but since CWM is so frustrating with all the nonononono's I had to get back to yours. And it's amazing as I already said!
Thank you!
Hi bladyle ,
I´ve read this thread about your updated RA-recovery. Because of the fact, that I´ve a google branded magic, I can´t flash this recovery. So my ask to you, if you could make a 32B Version or could tell the steps, how to port a recovery from another device.
Greets
I would also be glad to test a 32B port of this. Just let me know!
Can somebody reupload this? Please...
blaster44 said:
Can somebody reupload this? Please...
Click to expand...
Click to collapse
first post updated
Bladyle said:
first post updated
Click to expand...
Click to collapse
my bad....
Wow...New radio version thanks for the great work
Sent from my HTC Magic
I'm glad you like it
Hi Thanks for a very nice rom
I am tesing and if nay bug foud ill try to post if i am allowed ...
But i am unbale to enable int2Ext+ in my Phone.... i tried
Reflashing the ROM
Reflashing zip......
Could soen one expalin me setp by step...cuz the instructions at this page didnot work...
My cell phone is LG P500
Thankyou very much for your help.....
Unable to enable int2Ext+ (Fixed for JB 4.2.2)
Its becoming annoying as the memory is very low and i barely have a few apps but are needed 200mb internal memory is so low CronModINt2Ext+ fixed for 4.2.X did not work........ :crying:
Also if my recovery is an Issue
Also which recovery is stable enough and formats the sd-ext in ext4 ..... i am using CWM 5.0.2.6
My device is LG P500.......
Thanks
Personally I'm using AmonRA recovery (link in signature).
it formats ext2 and then you can "upgrade" it to ext3 and ext4.
installing the script is very simple:
1) mount /system, mount /data, mount /sd-ext.
2) install zip.
3) unmount /data, unmount /sd-ext.
4) format (wipe) sd-ext
5) reboot
uf0999 said:
Personally I'm using AmonRA recovery (link in signature).
it formats ext2 and then you can "upgrade" it to ext3 and ext4.
installing the script is very simple:
1) mount /system, mount /data, mount /sd-ext.
2) install zip.
3) unmount /data, unmount /sd-ext.
4) format (wipe) sd-ext
5) reboot
Click to expand...
Click to collapse
Nope it didnt work ... although my recovery is CWM 5.0.2.0
FInally Flashed a new recovery (Amon RA)....
Flashed a new Rom.... PAC ROM 20.0
And used the fiexd INT2EXT+.....
It Worked Thanks
Right now i am on cm 10.1 . Jelly Bean 4.2.2 . I have tried all method of partition but its not working i.e int2sd , app2sd and with minipartition tool , i have created partition with CWM 6.0.2.8 . Please Need urgent Help ?
rkumbhar said:
Right now i am on cm 10.1 . Jelly Bean 4.2.2 . I have tried all method of partition but its not working i.e int2sd , app2sd and with minipartition tool , i have created partition with CWM 6.0.2.8 . Please Need urgent Help ?
Click to expand...
Click to collapse
connect sdcard to pc via card reader & check in minitool partition wizard..you may have made the partitions logical or something..post the details here.
You need to make all partitions as Primary & with a sequence.
Affangta said:
connect sdcard to pc via card reader & check in minitool partition wizard..you may have made the partitions logical or something..post the details here.
You need to make all partitions as Primary & with a sequence.
Click to expand...
Click to collapse
No i have mad e partiton primary i just used this method > 1. delete your sd-ext partition (JUST YOUR SD-EXT PARTITION)
2. create partition
3. set as Primary
4. and CHOOSE ext4!!,
5. ok and then,
6. Apply
rkumbhar said:
No i have mad e partiton primary i just used this method > 1. delete your sd-ext partition (JUST YOUR SD-EXT PARTITION)
2. create partition
3. set as Primary
4. and CHOOSE ext4!!,
5. ok and then,
6. Apply
Click to expand...
Click to collapse
then the problem is in the memory script..have you tried those scripts on other roms? do they work?
Affangta said:
then the problem is in the memory script..have you tried those scripts on other roms? do they work?
Click to expand...
Click to collapse
NO didnt tried anyother rom please suggest me rom which is stabe and easily supports memory script
rkumbhar said:
NO didnt tried anyother rom please suggest me rom which is stabe and easily supports memory script
Click to expand...
Click to collapse
Change your recovery and try.. Then use the scripts i hope you know the permissions and all for scripts to work..
recovery
rkumbhar said:
Right now i am on cm 10.1 . Jelly Bean 4.2.2 . I have tried all method of partition but its not working i.e int2sd , app2sd and with minipartition tool , i have created partition with CWM 6.0.2.8 . Please Need urgent Help ?
Click to expand...
Click to collapse
Change your recovery and partition your sd card with Recovery it happens with me on everytime with mini partition tool but Recovery Soved it.....preferable Philz Recovery.:good:
maksuperlink said:
Change your recovery and partition your sd card with Recovery it happens with me on everytime with mini partition tool but Recovery Soved it.....preferable Philz Recovery.:good:
Click to expand...
Click to collapse
ok then after that which software or script should i use
recovery
rkumbhar said:
ok then after that which software or script should i use
Click to expand...
Click to collapse
Use Philz recovery for partition but first backup your all data
I have minicm9 build 7 and i want move /data and /cache to sd partions without flashing new kernel because it make higher ram and battery usage
in mounts2sd there is a option for mounting these two partitions to ext.
shubhojit89 said:
in mounts2sd there is a option for mounting these two partitions to ext.
Click to expand...
Click to collapse
In app?
michal16 said:
In app?
Click to expand...
Click to collapse
Yes in the app
shubhojit89 said:
Yes in the app
Click to expand...
Click to collapse
There is only mounting cache
Mounts2sd
michal16 said:
There is only mounting cache
Click to expand...
Click to collapse
It seems like you are not well versed with mounts2sd..
I use int2ext.. In order to make you understand i installed it did it..
Open Mounts2sd app..
Install the startup script..
After install reboot..
Now again open the app
Go to settings tap the middle one with settings icon..
As you have already seen the cache one..
Scroll down to system..
Tick on all the options except dalvich one..
Dont tick on anything else
Restart your device..
Open mounts2sd app again you will /data mounted to ext partition and data partition being increased..
Hit thanks
shubhojit89 said:
It seems like you are not well versed with mounts2sd..
I use int2ext.. In order to make you understand i installed it did it..
Open Mounts2sd app..
Install the startup script..
After install reboot..
Now again open the app
Go to settings tap the middle one with settings icon..
As you have already seen the cache one..
Scroll down to system..
Tick on all the options except dalvich one..
Dont tick on anything else
Restart your device..
Open mounts2sd app again you will /data mounted to ext partition and data partition being increased..
Hit thanks
Click to expand...
Click to collapse
Now i can safely overclock?
michal16 said:
Now i can safely overclock?
Click to expand...
Click to collapse
Can you exactly tell me what do you need cz I can't understand what do you want and what to do..
Check the thread of that rom you will find the oc kernel plus the partitions you need to install oc kernel..
Plus the ques given doesnt link to oc kernel..
via Apache Helicopter
i have minicm9 build 7 and it have OC implemented but not mounting /data and /cache as microsd partitions so i will burn NAND. I want mount /data and /cache as microsd partitions to safely overcock (will not burn NAND). Custom kernel mounting but when i got it i have bigger ram and battery usage.
Hi guys,
I'll share some scripts (flashable) that I've made to help with xperia l internal memory shortage.
1. First one is the link2sd-enabler.zip: http://www24.zippyshare.com/v/UduJGjqJ/file.html.
For this to work you'll need a second partition on the external sdcard formated as ext4. So first partition is the vfat one, the second primary partition on the external sd card is the ext4 one. Currently I have a 8Gb ext4 second partition.
Installation procedure: prepare your external sdcard, flash the zip, install link2sd application.
2. Second is the 01link2sdmm: http://www86.zippyshare.com/v/9DSgorlH/file.html.
The link2sd application does not automatically link the oat directory of the application. This directory contains the compiled application in the form of an odex file. For big apps this file is pretty big. So this script will automatically link this directory to the sdcard second partition for the applications that are linked to the sdcard. This works in conjunction with the link2sd-enabler.zip script.
Installation procedure: put this script in the /etc/init.d directory with the proper permissions. This way it will run at boot. If you want to run this directly after you link an app you'll need to use automagic and make a rule to run this script after you exit the link2sd application.
Observations: This script is not needed if you switch the internal partitions because you'll have enough space to keep the odex file internally. It's your choice.
3. Third script is the mm-partition-swapper.zip: http://www10.zippyshare.com/v/eyRO7gLw/file.html.
This one will switch your sdcard and userdata partition on your current mm rom. This was tested on rr573 that I have installed, but it should work in other mm roms as well.
Installation procedure: Make sure you have enough space on the external sd card so the script will be able to save your current data partition files. Save the files that you need from your internal partition to your external sd card. Make a backup of your current rom from twrp in case something wrong happens. Format from TWRP the internal sd card as ext4. Flash the zip. If everything works ok then you'll have a rom with the internal partitions swapped and you'll have 4Gb of user data available (minus your space for the already installed apps).
!!!!!!!!!!!!!!!!!!Very important!!!!!!!!!!!!!!!!!!
Don't try formatting the internal sdcard as ext4 with twrp version 3.0.2! It seems that his twrp version does not support this. I'm using twrp 2.8.7.0 by Barbarosa.
Observations: Twrp does not support backing up/restoring internal sd. If you swap partitions you'll have to backup your ext4 internal sd manually from within twrp connected through adb (with a simple tar command)
4. I think 256 ZRAM for the rr573 rom is too big so this zip will change this to 128MB:
mm-128Mb-zram.zip:http://www103.zippyshare.com/v/XjVAnXEl/file.html.
Please make a backup before flashing the swap zip and report if this worked for you.
Hope this helps,
Thanks.
cojocar.andrei said:
Hi guys,
1. First one is the link2sd-enabler.zip:
For this to work you'll need a second partition on the external sdcard formated as ext4. So first partition is the vfat one, the second primary partition on the external sd card is the ext4 one. Currently I have a 8Gb ext4 second partition.
Installation procedure: prepare your external sdcard, flash the zip, install link2sd application.
Click to expand...
Click to collapse
I've been struggeling for quite some time to get the link2sd app working since I flashed MM.
I've done a clean install, flashed the zip, installed link2sd, but I still get a 'mount script error, Cannot create script, mount: no such file or directory.' Anyone got an idea what I do wrong?
thx!
mikelektro said:
I've been struggeling for quite some time to get the link2sd app working since I flashed MM.
I've done a clean install, flashed the zip, installed link2sd, but I still get a 'mount script error, Cannot create script, mount: no such file or directory.' Anyone got an idea what I do wrong?
thx!
Click to expand...
Click to collapse
Check if you have in the /etc/init.d directory the 00link2sd script. For this script to work you need a rom with a working init.d (otherwise this won't work obviously...). If you have the script there, then check if you see a directory /data/sdext2 (if this directory is missing, but you have the 00link2sd script in the /etc/init.d directory, then this means you don't have init.d support in the rom). If you partition your sdcard correctly then the second ext4 partition of you sdcard should me mounted in the /data/sdext2 directory ... All these you need to check before installing the link2sd app...
Awesome! Thank you. I'll try this
cojocar.andrei said:
Check if you have in the /etc/init.d directory the 00link2sd script. For this script to work you need a rom with a working init.d (otherwise this won't work obviously...). If you have the script there, then check if you see a directory /data/sdext2 (if this directory is missing, but you have the 00link2sd script in the /etc/init.d directory, then this means you don't have init.d support in the rom). If you partition your sdcard correctly then the second ext4 partition of you sdcard should me mounted in the /data/sdext2 directory ... All these you need to check before installing the link2sd app...
Click to expand...
Click to collapse
I have the init.d folder, but it seems the sdext2 folder was only created after I installed the link2sd app.
I tried doing it all over again, but it still doesnt work, same messages...
mikelektro said:
I have the init.d folder, but it seems the sdext2 folder was only created after I installed the link2sd app.
I tried doing it all over again, but it still doesnt work, same messages...
Click to expand...
Click to collapse
Then your rom doesn't have init.d support. You need a kernel/rom (more precisely a ramdisk) with init.d support to use this ... The rr573 supports init.d ... Try it with this one ...
cojocar.andrei said:
Then your rom doesn't have init.d support. You need a kernel/rom (more precisely a ramdisk) with init.d support to use this ... The rr573 supports init.d ... Try it with this one ...
Click to expand...
Click to collapse
Thx! Which do you recommend? I've tried several in the last two or three months. Now I'm running AOSP-OMS.
I ran slim, RR and CM 13 beta before without any problems, just the storage issue.
mikelektro said:
Thx! Which do you recommend? I've tried several in the last two or three months. Now I'm running AOSP-OMS.
I ran slim, RR and CM 13 beta before without any problems, just the storage issue.
Click to expand...
Click to collapse
I've just told you. RR573. For a completely working camera on this one just replace a camera library... Search the rr thread...
Sent from the center of the galaxy
3. Third script is the mm-partition-swapper.zip: http://www10.zippyshare.com/v/eyRO7gLw/file.html.
This one will switch your sdcard and userdata partition on your current mm rom. This was tested on rr573 that I have installed, but it should work in other mm roms as well.
Installation procedure: Make sure you have enough space on the external sd card so the script will be able to save your current data partition files. Save the files that you need from your internal partition to your external sd card. Make a backup of your current rom from twrp in case something wrong happens. Format from TWRP the internal sd card as ext4. Flash the zip. If everything works ok then you'll have a rom with the internal partitions swapped and you'll have 4Gb of user data available (minus your space for the already installed apps).
Click to expand...
Click to collapse
I use rom AOSP OMS . file zip working?
Brick and problem other ?
Thx you building script .
Thx advanced
I am on stryflex MM ROM and TWRP 3.0.2.
I formatted internal storage as ext4, then flashed mm-partition-swapper.zip.
Says that there is no ext4fs partition and I tried reboot recovery and my phone is dead now, can't turn it on...
I don't blame you, I blame myself for trying. But please help. Flashtool doesn't recognize flash mode.
Don't use this method. Not safe.
Option58 said:
I am on stryflex MM ROM and TWRP 3.0.2.
I formatted internal storage as ext4, then flashed mm-partition-swapper.zip.
Says that there is no ext4fs partition and I tried reboot recovery and my phone is dead now, can't turn it on...
I don't blame you, I blame myself for trying. But please help. Flashtool doesn't recognize flash mode.
Don't use this method. Not safe.
Click to expand...
Click to collapse
Sorry to hear this. If the script gave you this error then the script did nothing to your phone. It just aborted the procedure because it did not find the sdcard formated as ext4. It must be the twrp version. I'm using twrp 2.8.7.0 by barbarosa. I think twrp 3.0.2 does not support formatting the internal sdcard as ext4. Most pobably the twrp version 3.0.2 formated something else as ext4 or whatever instead of internal sd... I did not know this. Sorry again...
Try to search the brick threads. If you still have a blue light when in flashmode I think you still have a chance to resurect it...
Sent from the center of the galaxy
I've modified the post to warn people of this twrp version. So, people, use only twrp 2.8.x.x to format the internal sdcard. I'm using 2.8.7.0 twrp version by Barbarosa. I don't know if other twrp versions support ext4 on internal sdcard.
Sent from the center of the galaxy
Thanks for the solutions. So now if I only need to swap internal sd and /data, i just need to flash 3rd script? I'm quite confusing about partitioning and memory stuffs
newguyknowsnothing said:
Thanks for the solutions. So now if I only need to swap internal sd and /data, i just need to flash 3rd script? I'm quite confusing about partitioning and memory stuffs
Click to expand...
Click to collapse
You have to have twrp 2.8.7.0, then format internal sdcard as ext4 (wipe settings) and then flash the zip...
Sent from the center of the galaxy
Yes, formatting internalSD as ext4 is tricky. My recovery was broken. Probably formatted something else. It wasn't your script.
However I have no volume up button on my phone (fell out) - no fastboot. And just volume down button (flash mode) and a somewhat broken USB cable. Phone not recognized by flashtool at all...
cojocar.andrei said:
You have to have twrp 2.8.7.0, then format internal sdcard as ext4 (wipe settings) and then flash the zip...
Sent from the center of the galaxy
Click to expand...
Click to collapse
Ok thanks! One more question, If I somewhat want to undo this, I need to back up the current MM rom before flashing the script? Will the internal sd and /data automtically be swapped back when I restore the back up?
newguyknowsnothing said:
Ok thanks! One more question, If I somewhat want to undo this, I need to back up the current MM rom before flashing the script? Will the internal sd and /data automtically be swapped back when I restore the back up?
Click to expand...
Click to collapse
After swapping the partitions your old backups of the rom will not work anymore (or probably they would just revert the swapping. Anyway if you want to restore a backup that's been done prior to swap it's better to format back by hand the internal sdcard to vfat and data to ext4)
For backing up a rom with swapped partitions you'll have to select the sdcard instead of data partition in the backup options... I did not try it yet...
Sent from the center of the galaxy
Option58 said:
Yes, formatting internalSD as ext4 is tricky. My recovery was broken. Probably formatted something else. It wasn't your script.
However I have no volume up button on my phone (fell out) - no fastboot. And just volume down button (flash mode) and a somewhat broken USB cable. Phone not recognized by flashtool at all...
Click to expand...
Click to collapse
I don't know, sorry. You have to search the brick threads...
Sent from the center of the galaxy
I ran the the link2sd enabler script on my rr573, works like a charm now.
Thank you so much, I needed this!
Didn't swapped the storages yet.
The dream is real!
Congratulations.
Seeking a long time for a script like mm-partition-swapper.zip
Before seeing your post, I had already made the formatting of SD0 (ext4) to try to install Link2SD to work with SD0 without work.
I used the TWRP 3.0.2.
I could easy return the partition to FAT.
I intend to make a clean installation of ROM on my device to then install your mm-partition-swapper.zip script.
As both the "DATA" as SD0 are empty you still think need to format with TWRP 2.8.7?
No way to change this script without the data transfer?
Only formatting partitions and inverted mounts?
If not necessary then ok...but... please clear this my doubts.
Again without getting tired ... very thank you even for your script.