Database Info

A few questions about flashing and kernels.

Since I want to flash the thalamus kernel on my Nexus S with JB, I have to be on a rom and given that no JB factory image is available yet I don't really get what I should do.
When the OTA came out I was on a deoxedex, zipaligned, etc. stock rom of ICS, so, in order to elude the error status 7 issue I flashed the 4.0.4 factory image from google and then flashed the OTA update.
If I want to flash a JB rom, do I have to re-flash an ICS rom? And if so, can it be a non-stock rom or I would get the error status 7 message again?

No. You just need to make sure you have a custom recovery, like CWM. I was on ICS and then flashed a JB ROM with no issues.

chronophase1 said:
No. You just need to make sure you have a custom recovery, like CWM. I was on ICS and then flashed a JB ROM with no issues.
Click to expand...
Click to collapse
Well, factory images just came out so it's fine now.

Haha. I was JUST about to post that. Good news for everybody.

Cant flash BAKED TF300T Blackbean rom anymore.

I would like to flash back the BAKED TF300T Blackbean rom. But after flashing sean's JellyBean-Hydro 1.4.6 i cant flash the rom anymore, i get stuck in Asus logo like many others. Im rooted and with unlocked bootloader. Im using TWRP JB version as Recovery now. Tried both CWM's also. CWM touch, wont make any difference. Normal CWM doesnt even work anymore.
I also played around with the fastboot and installed the stock WW30 (un-bootable), still cant flash the Blackbean. Is there currently anyway for me to flash it?
Hope i didnt forgot anything important to tell
Thanks

Heatti said:
I would like to flash back the BAKED TF300T Blackbean rom. But after flashing sean's JellyBean-Hydro 1.4.6 i cant flash the rom anymore, i get stuck in Asus logo like many others. Im rooted and with unlocked bootloader. Im using TWRP JB version as Recovery now. Tried both CWM's also. CWM touch, wont make any difference. Normal CWM doesnt even work anymore.
I also played around with the fastboot and installed the stock WW30 (un-bootable), still cant flash the Blackbean. Is there currently anyway for me to flash it?
Hope i didnt forgot anything important to tell
Thanks
Click to expand...
Click to collapse
No, there is no way to flash the older roms after JB update till now. You are stucked with Stock JB or hydro until the devs come out with a solution to downgrade to ICS

mikaole said:
No, there is no way to flash the older roms after JB update till now. You are stucked with Stock JB or hydro until the devs come out with a solution to downgrade to ICS
Click to expand...
Click to collapse
Okay, currently im trying to flash any other JB rom to try out, stuck on bootlogo almost everytime. Even the Hydro's re-flash did cause the stuck in logo.
EDIT: Ok, looks like im currently stuck in Asus logo and no system. I hope that the dev's can figure something out.

I was just wondering, aint the Blackbean Jelly Bean rom?
EDIT: Is it the JB bootloader causing that i cant boot into any rom i have flashed?

Heatti said:
I was just wondering, aint the Blackbean Jelly Bean rom?
EDIT: Is it the JB bootloader causing that i cant boot into any rom i have flashed?
Click to expand...
Click to collapse
Bkackbean and other custom jb roms are still using the ics kernel so until it's implemented on cm10 you can't flash after being on hydro or stock jb
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

[Q] PlEASE HELP! Problem whit install rom!

I download asus original firmware and put in sd card ( internal and external ) when i flash it from recovery thats not done! it's not complete process and sey faild!
should i relock bootloader or instal stock boot.img or somting?!
my previuse rom is origial and update to 9.4.4.40 and i try to install [ROM] ASUS-HYDRO 4.4-(8/10)-TF300/TF300tg--Super Fast!!!! but after finish and reboot stuck on logo so i wipe it and try to install original firmware but it dosent work!!!
Pleeeeeeeease Help meeeee

vahid-hetfield said:
I download asus original firmware and put in sd card ( internal and external ) when i flash it from recovery thats not done! it's not complete process and sey faild!
should i relock bootloader or instal stock boot.img or somting?!
my previuse rom is origial and update to 9.4.4.40 and i try to install [ROM] ASUS-HYDRO 4.4-(8/10)-TF300/TF300tg--Super Fast!!!! but after finish and reboot stuck on logo so i wipe it and try to install original firmware but it dosent work!!!
Pleeeeeeeease Help meeeee
Click to expand...
Click to collapse
Isn't 9.4.4.40 JB? If so you can only run a JB based rom. The dev for that hydro rom also has one for JB, that is what I'm running!
Good Luck!

tobdaryl said:
Isn't 9.4.4.40 JB? If so you can only run a JB based rom. The dev for that hydro rom also has one for JB, that is what I'm running!
Good Luck!
Click to expand...
Click to collapse
Firmware 9.4.4.40 is for the TF300TG which is the tablet with 3G capabilities. I don't know of a ROM yet for the TG models that actually has the 3G working. .40 is still an ICS bootloader as far as I can tell, so if you haven't updated past this firmware (DON'T). As for the issues, we need a bit more detail on "what's broken" and what you did to get there before we can offer any true advice on how to fix or correct the issue.
For some generic help, I would recommend you get the TWRP recovery as the CWM for this tablet seems to have issues and the TWRP runs nicely for me so far, and is very easy to use. Flash the TWRP recovery and try your flash again. Also, if you are trying to flash to the latest stock firmware, make sure you extract the ZIP from the ZIP you downloaded from ASUS. ASUS will zip the firmware into another zip file that you have to unzip first to get the recovery to flash it properly.
Let us know what's up and if the generic help assisted.
-Nate

I think he forgot to back up and restore kernel etc. Might cause issues. That's my 2 cents
Sent from my HTC Ruby using xda app-developers app

[Q] Is it bricked or not?

Dear all
My tf700t stops at the first Asus monitor with nVidia logo down and unlocked at the top left. Have rooted it with unlocked it with Asus tool, rooted with "RootDebugfs," added TWRP via GooManager and tested several roms, but Asus will not boot. Having thus access to Fastboot and TWRP. The following roms is tried: "Mysticial ROM v1", "Team EOS ROM for the TF700" and "Maniacs ROM" for 4.0, but the same thing happens every time. Have tried all possible ways to delete cache but no result. I need help now.

alldog said:
Dear all
My tf700t stops at the first Asus monitor with nVidia logo down and unlocked at the top left. Have rooted it with unlocked it with Asus tool, rooted with "RootDebugfs," added TWRP via GooManager and tested several roms, but Asus will not boot. Having thus access to Fastboot and TWRP. The following roms is tried: "Mysticial ROM v1", "Team EOS ROM for the TF700" and "Maniacs ROM" for 4.0, but the same thing happens every time. Have tried all possible ways to delete cache but no result. I need help now.
Click to expand...
Click to collapse
It seems you picked three ROMS with problems to try for your 1st flash. I can't say anything about the Mystical ROM v1 (although it is based on a TF300 JB OTA) but the other 2 just may not boot at all (maniac is old old, and the EOS JB Rom v3 couldn't boot).
If you can try ZEUS v4 (ICS) or unofficial CM10 alphs latest 9/25 build (JB) you would be OK.
IF you are truly stuck, and you have a microsd card, follow the restore from a soft brick guide from here: http://forum.xda-developers.com/showthread.php?t=1803343
Please note that this guide references the .26 update...if you updated to the .30 update, use that stock rom (I think you can get it from the same place). Just follow the instructions and you should be back at square one-stock. Re-root and reinstall TWRP, then choose a ROM more wisely, by reading the threads to see what is working well.

okantomi said:
It seems you picked three ROMS with problems to try for your 1st flash. I can't say anything about the Mystical ROM v1 (although it is based on a TF300 JB OTA) but the other 2 just may not boot at all (maniac is old old, and the EOS JB Rom v3 couldn't boot).
If you can try ZEUS v4 (ICS) or unofficial CM10 alphs latest 9/25 build (JB) you would be OK.
IF you are truly stuck, and you have a microsd card, follow the restore from a soft brick guide from here: http://forum.xda-developers.com/showthread.php?t=1803343
Please note that this guide references the .26 update...if you updated to the .30 update, use that stock rom (I think you can get it from the same place). Just follow the instructions and you should be back at square one-stock. Re-root and reinstall TWRP, then choose a ROM more wisely, by reading the threads to see what is working well.
Click to expand...
Click to collapse
Sorry, no luck with the ZEUS v4. Same happen again. When booting, the first screen hangs....no weel either. Have been reading for 3 days now here on xda and tryed a lot of possible solutions. I cant get TWRP to mount a microsd card, have to rely on the pad itself. So, any other ideas?

okantomi said:
It seems you picked three ROMS with problems to try for your 1st flash. I can't say anything about the Mystical ROM v1 (although it is based on a TF300 JB OTA) but the other 2 just may not boot at all (maniac is old old, and the EOS JB Rom v3 couldn't boot).
If you can try ZEUS v4 (ICS) or unofficial CM10 alphs latest 9/25 build (JB) you would be OK.
IF you are truly stuck, and you have a microsd card, follow the restore from a soft brick guide from here: http://forum.xda-developers.com/showthread.php?t=1803343
Please note that this guide references the .26 update...if you updated to the .30 update, use that stock rom (I think you can get it from the same place). Just follow the instructions and you should be back at square one-stock. Re-root and reinstall TWRP, then choose a ROM more wisely, by reading the threads to see what is working well.
Click to expand...
Click to collapse
Thanks for tips mister, since I dont can find the right version from ASUS I have to ask...in Europe is it the WW version i suppose to use, and its the Firmware not the Source code?

alldog said:
Sorry, no luck with the ZEUS v4. Same happen again. When booting, the first screen hangs....no weel either. Have been reading for 3 days now here on xda and tryed a lot of possible solutions. I cant get TWRP to mount a microsd card, have to rely on the pad itself. So, any other ideas?
Click to expand...
Click to collapse
Why not installing a stock rom (the same version you had before the issues started) with TWRP, that should get you back on track.
Edit: Yes european version should be WW_SKU and please use the firmware not the source.

Got one step further ..or did I? Tryed to put in stock .30 used "fastboot -i 0x0B05 flash system blob" in fastboot usb-mode. Seemd ok until this message arrived: Failed to prosess flash system error (0x17003)
So, close but not there. There are some problem with flashing since other images also refuse to install. What now?

[Q] Question on ICS to JB update - Bootloader or Full?

Currently my TF300T is unlocked, rooted, ICS TWRP 2.3.1, nvflash blob files created (copies made and moved elsewhere) with AndroidRoot.mobi custom bootloader. I'm running stock ICS v9.4.3.17 and never ran any OTA's (one is downloaded/pending for install, but doesn't seem to do anything - likely because I'm unlocked?).
It's been recommended to just flash the JB bootloader & use a custom JB ROM rather than updating fully to JB (was said there are or had been, issues flashing the full JB from ASUS' website). With the nvflash blobs, I should be able to go back to ICS so I'd rather do a full update if possible. An earlier post [Q] Upgrade to JB bootloader from Unlocked ICS BL? asked the same but I need clarification on the answer (plus making sure - they were running ICS stock bootloader, not the custom from AndroidRoot like me):
mikaole said:
just fastboot TWRP for ICS and then flash the 1st JB StockRom(dl from Asus and unzip once) in TWRP.
Then fastboot TWRP for JB, then flash the latest JB StockRom(dl from Asus and unzip once) .
Then fastboot TWRP for JB and then the Rom you like
Click to expand...
Click to collapse
If reading right, in fastboot mode first flash ICS TWRP (I ignore as I already have it), then from TWRP install the 1st JB Stock ROM zip, reboot into fastboot mode, flash TWRP for JB (or should I use nvflash?), and lastly, reboot into TWRP and install the latest ASUS stock ROM zip (v10.4.2.18).
Figuring my steps are correct, what version from ASUS is considered the 1st ROM? Currently only v10.4.2.17 and v10.4.2.18 are available. Also wondering why the need to flash an earlier version of JB and then the most current? And lastly, have others in same situation done this successfully or encountered any issues I should be aware of?

I did this a short time ago to go from BB6 on ICS bootloaded to BB6 on JB. All I did was dropped back to stock ICS, upgraded TWRP, then drop the unzipped zip of the latest ASUS release. This got me stock JB on JB bootloaded. I then flashed the next BB6 version and went on my way.
The only painful part was that the post called for moving the blob to a specific folder and creating a command file. None of that worked for me. But leaving the unzipped zip file in the root of the SD card and rebooting worked flawlessly.
Good luck.
Sent from my Transformer Pad TF300T using Tapatalk HD

bsaman said:
I did this a short time ago to go from BB6 on ICS bootloaded to BB6 on JB. All I did was dropped back to stock ICS, upgraded TWRP, then drop the unzipped zip of the latest ASUS release. This got me stock JB on JB bootloaded. I then flashed the next BB6 version and went on my way.
The only painful part was that the post called for moving the blob to a specific folder and creating a command file. None of that worked for me. But leaving the unzipped zip file in the root of the SD card and rebooting worked flawlessly.
Good luck.
Sent from my Transformer Pad TF300T using Tapatalk HD
Click to expand...
Click to collapse
Thanks! So you were going from another set of instructions but ended up just flashed twrp-jb and installed the unzipped zip of Asus JB release via TWRP (I left out the revert to ICS part since I'm already there)? And do you have nvflash installed? No issue running the JB version of TWRP prior to upgrading to JB (had thought bootloader or ... would have an issue with it)? Would seem like order should be reversed, I may not be understanding it all fully!
Had come across various instructions but none seemed to fit being unlocked/rooted/nvflash/... and wasn't sure if would require different steps. Again thanks.

wha2do said:
Would seem like order should be reversed, I may not be understanding it all fully!
Had come across various instructions but none seemed to fit being unlocked/rooted/nvflash/... and wasn't sure if would require different steps. Again thanks.
Click to expand...
Click to collapse
I think you're right... I was on BB6 w/ICS bootloader (NVflashed, though I don't think it matters) and had to roll back to ASUS ICS ROM first, then rooted, then upgraded to ASUS JB ROM, and then it goes blurry. Not sure if I upgraded TWRP or rooted stock JB at this point.
In any case, I followed the "update to JB" thread to a tee, and all went well except for the step regarding the actual JB update.
Sent from my Transformer Pad TF300T using Tapatalk HD

wha2do said:
Currently my TF300T is unlocked, rooted, ICS TWRP 2.3.1, nvflash blob files created (copies made and moved elsewhere) with AndroidRoot.mobi custom bootloader. I'm running stock ICS v9.4.3.17 and never ran any OTA's (one is downloaded/pending for install, but doesn't seem to do anything - likely because I'm unlocked?).
It's been recommended to just flash the JB bootloader & use a custom JB ROM rather than updating fully to JB (was said there are or had been, issues flashing the full JB from ASUS' website). With the nvflash blobs, I should be able to go back to ICS so I'd rather do a full update if possible. An earlier post [Q] Upgrade to JB bootloader from Unlocked ICS BL? asked the same but I need clarification on the answer (plus making sure - they were running ICS stock bootloader, not the custom from AndroidRoot like me):
If reading right, in fastboot mode first flash ICS TWRP (I ignore as I already have it), then from TWRP install the 1st JB Stock ROM zip, reboot into fastboot mode, flash TWRP for JB (or should I use nvflash?), and lastly, reboot into TWRP and install the latest ASUS stock ROM zip (v10.4.2.18).
Figuring my steps are correct, what version from ASUS is considered the 1st ROM? Currently only v10.4.2.17 and v10.4.2.18 are available. Also wondering why the need to flash an earlier version of JB and then the most current? And lastly, have others in same situation done this successfully or encountered any issues I should be aware of?
Click to expand...
Click to collapse
First I want to address your possible OTA. Processing requires stock recovery on your tablet. Having Twrp or CWM means the update will not process.
When you flash a complete stock rom from fastboot, Twrp, or CWM you are flashing stock recovery as it is included in the blob.
Most versions of Asus firmware can be found here! Don't forget to look at the second post as It includes the ICS stuff and older JB.
The first version of JB was to my knowledge JB 10.4.2.9.
Sorry, I forgot why flash first version of JB.
It has been said that is when your internal sdcard was repartitioned for JB.

tobdaryl said:
First I want to address your possible OTA. Processing requires stock recovery on your tablet. Having Twrp or CWM means the update will not process.
When you flash a complete stock rom from fastboot, Twrp, or CWM you are flashing stock recovery as it is included in the blob.
Most versions of Asus firmware can be found here! Don't forget to look at the second post as It includes the ICS stuff and older JB.
The first version of JB was to my knowledge JB 10.4.2.9.
Sorry, I forgot why flash first version of JB.
It has been said that is when your internal sdcard was repartitioned for JB.
Click to expand...
Click to collapse
Thanks for the info. To add to your one comment (for others that may come across this looking for add'l info), flashing a full stock rom will overwrite any custom recovery previously in place. TWRP (using the appropriate version for your firmware) or CWM will need to be reflashed again...
Checking, it does appear v10.4.2.9 is the first version of JB on the TF300T.
I've come across at least one or more posts/guides that mention ICS v9.4.3.30 should be installed before updating to JB - one being: [GUIDE]Upgrade your TF300t to Jellybean, recovery, root & remove bloatware[Noobproof]. I'm wondering if it's because that method updates to JB using the dlpkgfile (not sure what format it is)?
My take is doing the additional flash to v9.4.3.30 first can't hurt anything, but quite possibly unnecessary here? Any other thoughts or words of warnings from anyone? Thanks!