desire S stuck on startup... - HTC Desire S

help me i have problem in my desire s when i powered on stuck on startup
i try to flash but not accept any firmware coz hboot version very high
SAGA PVT SHIP S-ON RL
HBOOT- 2.00.0002
And SuperCId: HTC__001
i try many roms always getting error and i try to downgrade but downgrading solution not working in fastboot mode
please help me how solve that problem thanks in advance

imeicodes said:
i try to flash but not accept any firmware coz hboot version very high
SAGA PVT SHIP S-ON RL
HBOOT- 2.00.0002
Click to expand...
Click to collapse
That HBOOT version is not "too high" for flashing ROMs. See here: http://forum.xda-developers.com/showthread.php?t=1525100

Did you flash the boot.img of the roms you are trying?
"Unix is user-friendly. It's just very selective about who its friends are."

J_Schnacki said:
That HBOOT version is not "too high" for flashing ROMs. See here: http://forum.xda-developers.com/showthread.php?t=1525100
Click to expand...
Click to collapse
yes i try that one too when i install that rom show error on installation
E:Can't open /sdcard/Reaper_v4.0.zip
(bad)
Installation aborted
any other solution ??

jugg1es said:
Did you flash the boot.img of the roms you are trying?
"Unix is user-friendly. It's just very selective about who its friends are."
Click to expand...
Click to collapse
yes i did before flashing and after flash but condition still same stuck on startup logo

i have one more phone desire s it is working fine i want to update GB To ICS
i need info about some security
my phone info
SAGA PVT SHIP S-ON RL
HBOOT- 2.00.0002
Super CID: Orang001
i read some thread for downgrading hboot but after downgrade i need to flash any Official RUU or only Same REGION Ruu needed ?
If yes then please give me Orang001 RUU working link ... thanks in advance

This seems to be one of the few sites still holding RUUs http://www.tsar3000.com/Joomla/inde...-stock-roms&catid=65:htc-downloads&Itemid=107
"Unix is user-friendly. It's just very selective about who its friends are."

Related

Rooted, flashed recovery.. nothing but boot loop

I was able to get s-off using revolutionary
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.17.1111
RADIO-10.11.9007.15_M
eMMC-BOOT
Jun 2 2011,22:31:39
i also have cwm recovery
however, when i install ANY rom i end up in a boot loop. what could be the problem?
i think im supposed to install a 1.27 hboot? can anyone link me the file?
ill continue reading up in the mean time
Are you flashing the appropriate firmware for the ROM? For ICS ROM's you will need to update your firmware and HBOOT to V3.32 with HBOOT 1.27.000.
DonDizzurp said:
I was able to get s-off using revolutionary
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.17.1111
RADIO-10.11.9007.15_M
eMMC-BOOT
Jun 2 2011,22:31:39
i also have cwm recovery
however, when i install ANY rom i end up in a boot loop. what could be the problem?
i think im supposed to install a 1.27 hboot? can anyone link me the file?
ill continue reading up in the mean time
Click to expand...
Click to collapse
Hi,
Yes, you need to flash the appropriate firmware,which for ICS is 3.32
This will give hboot 1.27 ,and the radio you need as well.
Look HERE
It explains everything in detail,and gives you all the links you need...
thanks, ill check it out
EDIT: nice.. after searching for mirrors to files i got it working.. good stuff

[Q] bootloop

Hello Guys
so i got a new htc sensation
its rooted, S-OFF
whats written in fastboot is the following
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT- 1.27.1100
Radio- 10.11.9007.15_M
eMMC-boot
once i flashed the rom it boots enter the home screen, 3 seconds later freezes and goes to a bootloop what should i do?
-Alaa- said:
Hello Guys
so i got a new htc sensation
its rooted, S-OFF
whats written in fastboot is the following
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT- 1.27.1100
Radio- 10.11.9007.15_M
eMMC-boot
once i flashed the rom it boots enter the home screen, 3 seconds later freezes and goes to a bootloop what should i do?
Click to expand...
Click to collapse
Hi,
What have you been doing?
You have ICS hboot,but a GingerBread radio.
I suggest you reflash the 3.32 firmware.
Look HERE
i tried to put the firmware on sd and go to bootloader and i get this message
Model ID incorrect!
update fail
what next?
-Alaa- said:
i tried to put the firmware on sd and go to bootloader and i get this message
Model ID incorrect!
update fail
what next?
Click to expand...
Click to collapse
Hi,
It is all explained in the thread.
You need to find out your cid number ,and then, edit the text file in the firmware package.
i know but how i can know my cid if i can only access the bootloader?
-Alaa- said:
i know but how i can know my cid if i can only access the bootloader?
Click to expand...
Click to collapse
Hi,
You can get to bootloader,so choose fastboot:
"How to check your CID & MID:
You can do this one of the following ways."
1. fastboot load into the bootloader and do:
fastboot getvar cid
fastboot getvar mid
Thank You Man You Saved Me And Made My Day!
-Alaa- said:
Thank You Man You Saved Me And Made My Day!
Click to expand...
Click to collapse
:good:

RUU installation failed.

yesterday I had installed a tmobile ruu. The RUU changed my radio and my hboot. Now I wanted to install my RUU wich i have used at least 3 or 5 times. But it when wanted to run the ruu it says that i have to search a compatible ruu for my phone. but because i have already used the ruu i simply changed the radio to 1.11.50.05.28 but it don't work is it because i have a other hboot?
my ruu: RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
my bootloader:
***RELOCKED***
VLE PVT SHIP S-OFF RL
CID-11111111
HBOOT-1.14.0004
RADIO-1.11.50.05.28
OpenDSP-v31.1.0.45.0815
eMMC-boot
Aug 14 2012, 18:01:48
Click to expand...
Click to collapse
As you're s-off I think you should reflash stock recovery before you will be able to flash any other RUU successfully...
Also it's not necessary to lock/unlock bootloader once you are s-off.
rootrider said:
As you're s-off I think you should reflash stock recovery before you will be able to flash any other RUU successfully...
Also it's not necessary to lock/unlock bootloader once you are s-off.
Click to expand...
Click to collapse
Thanks i will try it. But Tage last times it was successfully even with TWRP and S-Off. Tested but it doesn't work

Back to stock rom but which one i need?

Hi,
I have a question: I will back to stock rom but i have try the versions on shipped-roms.com: http://www.shipped-roms.com/index.php?category=android&model=Ville but nothing works! Do you nn which version i need?
Relocked
VLE PVT SHIP S-ON RL
HBOOT-2.15.0000
RADIO-1.15.50.05.29
OpenDSP-v31.1.0.45.0815
eMMC-boot
Dec 14 2012,17:10:57:-1
xander1986 said:
Hi,
I have a question: I will back to stock rom but i have try the versions on shipped-roms.com: http://www.shipped-roms.com/index.php?category=android&model=Ville but nothing works! Do you nn which version i need?
Relocked
VLE PVT SHIP S-ON RL
HBOOT-2.15.0000
RADIO-1.15.50.05.29
OpenDSP-v31.1.0.45.0815
eMMC-boot
Dec 14 2012,17:10:57:-1
Click to expand...
Click to collapse
You're in the wrong forum, this is the Ville C2 forum. Allow me to redirect you to the Ville forum. :good:
Since you're S-ON, we need to know what your CID is... I think you should find in in bootlloader.
Another option is to get S- OFF and then you are able to use any RUU you want
And what goes wrong when trying to go back to stock?
Do you get any error messages?
FantasyGamer said:
Since you're S-ON, we need to know what your CID is... I think you should find in in bootlloader.
Another option is to get S- OFF and then you are able to use any RUU you want
Click to expand...
Click to collapse
I believe that's true only for RUUs older than Jelly Bean, JB RUUs do not accept other CIDs (also no super CID).
But I might be wrong!
FantasyGamer said:
Since you're S-ON, we need to know what your CID is... I think you should find in in bootlloader.
Another option is to get S- OFF and then you are able to use any RUU you want
And what goes wrong when trying to go back to stock?
Do you get any error messages?
Click to expand...
Click to collapse
When he copy the files he stops and says that the Ruu wrong version is!
Ok my CID is: HTC E_11!
Ok my CID is: HTC E_11! Can you tel me wich ruu i needed?

[Q] Please somebody HELP!!!!

I was on Viper and it was good and suddenly it got so slow so I wanted to change the rom
I upgraded the hboot from 2.15 to 2.16 using magiofuu i tried to put MagioRom on the sdcard but no use
and now I think i bricked the phone
Tampered
unlocked
vle pvt ship s-on rl
hboot-2.16.0000
radio-1.20.50.05.16
OpenDsp-v33.1.0.45.1128
eMMC-boot
anyway I tried a lot but nothing is working either
error no device
or error 99
and it was s-off I used rumrunner
RUU is not working as well
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4 (1).exe
is there anyway to s-off it please ?
and what recovery should I use !?
leosparta said:
I was on Viper and it was good and suddenly it got so slow so I wanted to change the rom
I upgraded the hboot from 2.15 to 2.16 using magiofuu i tried to put MagioRom on the sdcard but no use
and now I think i bricked the phone
Tampered
unlocked
vle pvt ship s-on rl
hboot-2.16.0000
radio-1.20.50.05.16
OpenDsp-v33.1.0.45.1128
eMMC-boot
anyway I tried a lot but nothing is working either
error no device
or error 99
and it was s-off I used rumrunner
RUU is not working as well
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4 (1).exe
is there anyway to s-off it please ?
and what recovery should I use !?
Click to expand...
Click to collapse
finally it worked
in recovery I used sideload and i put the rom magio on the sdcard
adb sideload magio.rom
then it didn't work just was stock on htc logo
afterwards i unzipped the boot.img from magio.zip and flashed it
fastboot flash boot boot.img
and then it worked like a charm
thank you all guys

Categories

Resources