Related
Looks like my worst fears came true. I applied a Metamorph that was supposed to be compatible with all froyo based HDPI Devices, but I guess that wasn't true. It worked at first then I applied another mod from the same thread, then **** hit the fan.
Now my g2x is stuck in a boot loop. I have a stock recovery, and I'm on a mac to make things worse. Please help.
You'll need to fix from hboot guy
Sent from my Supersonic running MikGinger Sense 2.1
evasilisin said:
You'll need to fix from hboot guy
Sent from my Supersonic running MikGinger Sense 2.1
Click to expand...
Click to collapse
How do I do that? Specifically on a mac...
I was there yesterday, try a full restore. Volume down and power when phone is off.
Brought mine back to life.
samson_420 said:
I was there yesterday, try a full restore. Volume down and power when phone is off.
Brought mine back to life.
Click to expand...
Click to collapse
Brings me to the recovery (Open box with a green android), then it just continues looping the startup screen.
Can someone please help, my g2x is a paper weight right now
Pull the system dump from the development section. Push the framework-res file via adb while the phone is boot looping or while in cwm if that works.
You should always have a nandroid backup before modifying system files. If you have one, just restore /system.
The first option is the easiest.
Sent from my LG-P999 using XDA App
DeezNotes said:
Pull the system dump from the development section. Push the framework-res file via adb while the phone is boot looping or while in cwm if that works.
You should always have a nandroid backup before modifying system files. If you have one, just restore /system.
The first option is the easiest.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
I can't figure out how to pull the framework-apk from the system dump. When I type in ./adb devices into terminal, none come up. This is while the boot screen is looping and while it's in stock recovery. I don't have cwm installed
Go to the development section and download the dump in the post labeled T-Mobile g2x dump. Unzip him. After it's unzipped, find /system/framework/framework-res.apk. That's the original file. You news to replace that one with your modified one. Adb is an easy way to do that.
If you're rooted, you should be able to adb push that file to overwrite the modified one. If its not working, you may need to enable read+write on system.
I haven't rooted yet since this is a trial device, so I can't give you a step by step. And I'm typing this on the phone. :-/
Sent from my LG-P999 using XDA App
There are cwm instructions for Mac + Linux (thats what it looks like you're on based on your post). Try installing that to get adb working.
Sent from my LG-P999 using XDA App
I can't figure out how to get CWM onto my phone on a mac, adb can't even see the phone.
It's not even turning on now... I'm really worried.
what a helpful community we have here
rashad1 said:
what a helpful community we have here
Click to expand...
Click to collapse
Good way to ask for help... Everyone has given you directions. Your phone isn't a brick. Get on a windows PC and push everything over. Next time, be a bit more careful and flash a recovery image and nandroid before editing things.
Sent from my LG-P999 using XDA App
don't you have to adb shell to see devices in recovery?
rashad1 said:
what a helpful community we have here
Click to expand...
Click to collapse
First of all, I understand that you're worried about your phone, but don't get mad at us when we didn't do anything and we are, in fact, trying to help. Second, in order to fix your phone using your own computer, you're probably going to have to install a Linux distribution such as Ubuntu. I don't think anyone has found a way to use nvflash on a Mac thus far. Installing Ubuntu is fairly easy and wouldn't take long.
Check out this: https://help.ubuntu.com/community/M...telInstallation#Dual-Boot: Mac OSX and Ubuntu
which stock image do I download? There are several threads.
Do I get it from TMobile G2X dump, or T-Mobile G2X P999 Facotry Firmware, or Stock NANDROID Restore Froyo 2.22 Rooted LG-P999-V10f 4-23-2011
How do I get my computer to recognize the phone? when enter ./adb devices, nothing comes up
Can someone post the framework-res.apk for me please?
How do I restore the firmware with nvflash? I'm borrowing my brothers HP windows 7 computer
rashad1 said:
which stock image do I download? There are several threads.
Do I get it from TMobile G2X dump, or T-Mobile G2X P999 Facotry Firmware, or Stock NANDROID Restore Froyo 2.22 Rooted LG-P999-V10f 4-23-2011
How do I get my computer to recognize the phone? when enter ./adb devices, nothing comes up
Can someone post the framework-res.apk for me please?
How do I restore the firmware with nvflash? I'm borrowing my brothers HP windows 7 computer
Click to expand...
Click to collapse
Here are the drivers so that your computer can recognize your phone
http://forum.xda-developers.com/showthread.php?t=1044881&highlight=drivers
Hope that helps
moshe22 said:
Here are the drivers so that your computer can recognize your phone
http://forum.xda-developers.com/showthread.php?t=1044881&highlight=drivers
Hope that helps
Click to expand...
Click to collapse
my mac doesn't recognize it in adb mode, and it doesn't need a driver
If you can borrow a friend's windows PC, install the LG desktop app. It has a recovery option (assuming it can still communicate with the phone). That's probably the fastest way to get back to stock.
How long did it take?
samson_420 said:
I was there yesterday, try a full restore. Volume down and power when phone is off.
Brought mine back to life.
Click to expand...
Click to collapse
How long did it take?
ok so i rooted my xoom the other day flashed hammer head 2.1. restored my tablet to stock rooted rom buwhen i did i have now found a way to lock my device. i can boot up and have my su icon available to me however i cannot gain root access even through adb it tells me the file system is read only. so i figured i some how unrooted the device and proceeded to begin the root process for honeycomb. however when trying to push su over to the tablet it tells me the file failed to transfer because the file system is read only what do i do now? Any help would be appreciated.
Ok i have now some how erased my device completely it stops at the moto dual core boot screen. I still have cwm but thats it. Im at a loss guys. Bout to warranty this by runnin over it!
Sent from my ADR6400L using XDA Premium App
josephparlangeli said:
Ok i have now some how erased my device completely it stops at the moto dual core boot screen. I still have cwm but thats it. Im at a loss guys. Bout to warranty this by runnin over it!
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
your a noob mate seriously... these board are full of people like you... 1.. download the stock images from
http://developer.motorola.com/products/software/MZ604_HWI69.zip/
if your device is a wifi only and then push the files with fastboot...
ie.. unzip the folder into where the adb fastboot exe are
1. fastboot flash system system.img
2. fastboot flash boot boot.img
3. fastboot flash user user.img
4. fastboot flash recovery recovery.img (as you obviously cant handle root..)
Dont have to be an ass about it. But yeah already tried that when i try to push the files it tells me there is no such directory found. So i made sure in cwmr the system was mounted then it tries to transfer but tells me the directory is read only. So i tried the unlock procedure to make sure the tablet was unlocked. everything goes smoothly till i try to transfer the files again.
Sent from my ADR6400L using XDA Premium App
josephparlangeli said:
Dont have to be an ass about it. But yeah already tried that when i try to push the files it tells me there is no such directory found. So i made sure in cwmr the system was mounted then it tries to transfer but tells me the directory is read only. So i tried the unlock procedure to make sure the tablet was unlocked. everything goes smoothly till i try to transfer the files again.
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
Not talking mounting in cwm here bud
Get to fastboot mode not android recovery same process power plus vol down
Then flash the files not push as mounting in cwm only put the files on sd card not flashing it outright from what your reply was
I was a noob once and soft bricked everything and yet i read and read and fixed stuff myself through searching.. Cuz ultimately if its bricked what do u have to lose then ey lol just find and try everything cant make a worse paperweight than one u may already have eh
But get to fastboot not cwm then flash the files like i said and it will almost certainly work
Sent from my HTC Sensation 4G using XDA Premium App
Thats my other problem my sd card slot isnt wrkn that was my initial instinct. If i try to flash to the sd card it says no directory found. Ive used 3 different sd cards and get the same message. Im really thinkin i got a bad sd slot even when it was rooted and running i had issues with the sd card not wrking. I had several back ups on it when it did wrk and those dissappeared as well. I bought the xoom soley because of the sd card slot was pretty much going to be my saving grace when doing back ups if i ever messed up. I tried wrking it in fastboot as well if i try to flash to the system its read only. If i flash to the sd card directory not found. I know these questions are irritating to more savy individuals and i looked around trust me the last thing i like to do is say der i dun broke it i need an adult. Im just makin sure i didnt over look something more savy ppl know about. I honestly think its bricked at this point. Ive tried what you said and any other way i can think of but i alway get some kind of error.
Sent from my ADR6400L using XDA Premium App
Sent from my ADR6400L using XDA Premium App
What version of clockwork mod recovery are you using?
I believe is 4.0.0.2 i just got to wrk i know its the latest release tho.
Sent from my ADR6400L using XDA Premium App
josephparlangeli said:
I believe is 4.0.0.2 i just got to wrk i know its the latest release tho.
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
I would use this recovery instead of 4.0.0.2.
Ok thats a very helpful link. Did not know they had a special recovry for the xoom or realize that it wiped out all media if i didnt have this recovery. Lesson learned however i think its bricked solid now cuz it wont charge or come on at all may very well be a bad unit but i c where i went wrong with su as well i flashed 3.0 with out the chmod 4577 during the su update from cwm. Well im going to grab another one from bb and c what happens the unit is non responsive at this point. Thanks to everyone that posted here for the help.
Sent from my ADR6400L using XDA Premium App
josephparlangeli said:
Ok thats a very helpful link. Did not know they had a special recovry for the xoom or realize that it wiped out all media if i didnt have this recovery. Lesson learned however i think its bricked solid now cuz it wont charge or come on at all may very well be a bad unit but i c where i went wrong with su as well i flashed 3.0 with out the chmod 4577 during the su update from cwm. Well im going to grab another one from bb and c what happens the unit is non responsive at this point. Thanks to everyone that posted here for the help.
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
you needed to flash the recovery with FASTBOOT.. not adb push chmod stuff; much easier and the process works
read the top post again.. get the recovery.img file (the v3 one the other fellow told you to grab)
1. hold the volume down button and the power button... some text will come on up the top about fasboot protocol and then
2. leave it plugged in to your computer and DONT TOUCH THE XOOM...
3. get your cmd.exe prompt window out and navigate to where your adb.exe AND fastboot.exe files are (should be tools or platform-tools...)
4. Place the recovery.img file into the explorer window where the adb.exe and fastboot.exe both are.... (this should be there as u keep trying to use adb commands but do it again to make sure)
5. type fastboot flash recovery recovery.img
thats the recovery.img flashed...
Got my xoom replaced the other day works fine have root flashed the above mention cwm and everything worked fine. Funny thing tho when they checked to see if the original device had been unlocked they said it was still locked and they gave me a replacement. Other wise id have had to use the warranty i bought. Just thought that was odd.
Sent from my ADR6400L using XDA Premium App
josephparlangeli said:
Got my xoom replaced the other day works fine have root flashed the above mention cwm and everything worked fine. Funny thing tho when they checked to see if the original device had been unlocked they said it was still locked and they gave me a replacement. Other wise id have had to use the warranty i bought. Just thought that was odd.
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
Well, there's your answer. You did not successfully unlock.
Glad that you learned some useful things.
flying honey comb on xoom mz601
Hi everybody. I install new image for my xoom MZ601 (tiamat last version).
Xoom from Hongkong (CHINA) with 3G.
i make all steps about unlock bootloader and root. After all that steps - i have ClockworkRecovery v 3.2.0.0 (solarnz-R4c-100611-1150). After reboot (motorola logo) i see all time honeycomb flying.
I need help.
opps: i unbrick my device on android 3.0.1. Now try again to install 3.2 by Tiamat
3.2 doesn't work. SAD
aKolp2010 said:
Hi everybody. I install new image for my xoom MZ601 (tiamat last version).
Xoom from Hongkong (CHINA) with 3G.
i make all steps about unlock bootloader and root. After all that steps - i have ClockworkRecovery v 3.2.0.0 (solarnz-R4c-100611-1150). After reboot (motorola logo) i see all time honeycomb flying.
I need help.
opps: i unbrick my device on android 3.0.1. Now try again to install 3.2 by Tiamat
3.2 doesn't work. SAD
Click to expand...
Click to collapse
You should open a new thread with your issue. Seems the OP in this one has fixed his issues by replacing his Xoom. You'll get better attention by creating a new thread in this forum.
Hello,
I've got a Skyrocket i727 and am stuck on the psneuter part when trying to root. I'm sorry for posting here since I'm sure the answers lie somewhere, but I've been researching since yesterday and haven't found it. I'm on a satellite internet connection that is pretttty slow.
Anyways, so I have the drivers installed, and then run SuperOneClick as Admin on windows 7. I click root and it runs until psneuter then appears to be stuck. It freezes there. When I close the black command screen that has opened it suggests I turn off debugging mode. When I try to close debugging mode it just stays at Waiting for Device...
So, what am I missing?
Thanks so much in advance.
SuperOneClick didn't work on mine because it had updated to 2.3.6 from 2.3.5...Which one do you have?
You need to use this method if your on android 2.3.6
http://forum.xda-developers.com/showthread.php?t=1340526
My phone
I'm using Gingerbread.uckj2
android 2.3.5
ddxv said:
I'm using Gingerbread.uckj2
android 2.3.5
Click to expand...
Click to collapse
Try this method. It worked better than any I've tried. Make sure you READ the OP. If you have any more questions let us know.
http://forum.xda-developers.com/showthread.php?p=19223405
Sent from my SAMSUNG-SGH-I727 using xda premium
So, I've done some reading about CWM and am still not quite sure what it is. Does it replace my current setup? Do I lose my stuff?
Edit: for anyone else following this topic I found this info about cwm:
http://www.addictivetips.com/mobile...-and-how-to-use-it-on-android-complete-guide/
Is it possible to do this without having an external sd card?
Must have external SD. CWM is an aftermarket recovery that replaces your stock recovery. It allows you to flash roms, make nandroid backups restore nandroid backups ect.....
Sent from my SAMSUNG-SGH-I727 using xda premium
ddxv said:
Is it possible to do this without having an external sd card?
Click to expand...
Click to collapse
I had this issue over the weekend. Go out to samsungs site and find the kids drivers. In the superclick in the "exploit" switch to zergrush, click root. It should say do you want to install drivers, click yes and it shouldn't take more then 10 minutes.
ok, so a few days ago i was flashing the G2x weapon rom onto my rooted G2x, but while i was in the clockwork mod to flash it it froze on me, i left it like that for an hour or so, but it didnt work, so i took the battery out. now whenever i turn it on, it loads the LG screen, then nothing, the screen stays turned on, but its black, ive tried to boot it into recovery mode but that does not work either. What should i do?
Did you do One-Click NVFlash>? if u used Rom Manager you probably fake flashed and thats why its not working for you. You should use NVflash followt he steps and boot up into recover and restore a back up. GOod Luck
thanks ill try that
ed116 said:
Did you do One-Click NVFlash>? if u used Rom Manager you probably fake flashed and thats why its not working for you. You should use NVflash followt he steps and boot up into recover and restore a back up. GOod Luck
Click to expand...
Click to collapse
+1
Also try holding the vol down+pwr for longer than usual might just be being difficult
Making bad decision's one at a time.
so when i get into nvflash it says usb not found,
i did all the steps, and had it all done, but it dosent find my phone
Did u install the drivers correctly? That's probably the problem if it says USB is not found. I believe there is a video about how to install the drivers. Ill look for the video now
Sent from my LG-P999 using xda premium
Sorry for the double post, and here is a video link
http://www.youtube.com/watch?v=nmzk92rV6k4&feature=youtube_gdata_player
I used Linux to nvflash mine so I haven't used this method but I'm sure a lot of other people have.
Sent from my LG-P999 using xda premium
moeahmad1995 said:
Sorry for the double post, and here is a video link
http://www.youtube.com/watch?v=nmzk92rV6k4&feature=youtube_gdata_player
I used Linux to nvflash mine so I haven't used this method but I'm sure a lot of other people have.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1054492
This was written for Windows users, I followed this one myself, pretty straight-forward, and "idiot proof". (If anything can be truly idiot proof. Cynical, who, me?)
so, ive flashed my phone through nvflash and i got clockwork mod up and running, but whenever i select the file to flash that is on my SD card, it says no files found. i even tried going to my backup on the clockwork file, and nothing.
reki94 said:
so, ive flashed my phone through nvflash and i got clockwork mod up and running, but whenever i select the file to flash that is on my SD card, it says no files found. i even tried going to my backup on the clockwork file, and nothing.
Click to expand...
Click to collapse
Since changing to Nvflash, did you download the rom you want to install and transfer it to the phone from your computer. Using Rom Manager it may not have left a copy on your phone.
If you cant hook up the SD card to the computer, get an external SD card and make sure u've installed clockwordmod with external sd, hook it up to a laptop with an SD card slot, and put it in , then take the mini sd and pop it in your phone, then boot up and that should do it good luck! atleast now your 1 step closer to recovering your phone
Ughh hate,seeing this happen...hope u flashed nV..all the best
Sent from my LG-P999 using xda premium
Hope you didn't brick your phone.
No you did not brick your phone. Rom manager downloads the file to sdcard/clockworkmod/downloads. Look there for the file. Only if you download a rom from your browser does it go to externalsdcard/downloads
Sent from my LG-P999 using xda premium
This thread is just to direct all the noobs into the right direction, related to root and flash new roms in the Inspire 4G.
[*]Rooting and reverting to stock
Due to the retirement of the Hack Kit, rooting methods have been reduced to:
http://forum.xda-developers.com/showthread.php?t=2168500
or if you are skilled in using adb and fastboot commands:
http://tau.shadowchild.nl/attn1/?cat=6
If you are still stuck and want to revert your phone back to out of the box, then use Marsdta's Guide:
http://forum.xda-developers.com/showthread.php?t=1396229
or Gene Poole's Tool (that will revert also S-OFF):
http://forum.xda-developers.com/showthread.php?t=1208507
[*]Flashing a Custom Rom
To flash a custom rom you need to be rooted and S-OFF (if u used the Hack Kit) or have and unlocked bootloader using HTCDEV tool (wich I don't suggest)
Once u are S-OFF and have CWM or some other custom recovery installed (I personally prefer 4ext) you have to follow these steps (read the dev's thread about particularities. This is just a general guide on how to do it):
Download the custom rom .zip file and put it in your sdcard. Make sure that u check md5sum first just to avoid bootloops.
Reboot phone in recovery. There are many ways to do that, the first can be using Rom Manager (I don't suggest using it for anything else but that) and choosing reboot in recovery option. The second way is to boot in bootloader (press power down and reboot choosing hboot) or just turn phone off and power it up pressing power and volume down. And the last is to use adb commands. Plug the phone as charge only with usb debugging on, open a cmd as admin or terminal as root in your PC and then type adb reboot recovery.
Once in recovery, you need to do a full wipe (wipe data / factory reset and wipe cache + dalvik cache). You can also format some other partitions such as data and system, but the full wipe will work.
When full wipe is finished, go to flash zip from sdcard option, choose zip file and then flash that file.
Reboot the phone once it has finished flashing and wait for the device to fully reboot. The first boot will take a while (probably longer than usual) so don't get scared.
If you flashed a CM based rom, you need to flash google apps separately as well, so find the gapps file corresponding to your rom and flash it in the same manner as above described.
Trouble Shooting
Bootloops: If your phone repeats over and over the bootanimation, don't panic, you are not bricked. Something must have gotten wrong but you can reboot in recovery and re flash the rom as previously described. If bootloop is still there, then try downloading the zip again or choose a diffrent rom.
Factory Reset: If you factory reset the phone and you are not stock, then the phone won't have a rom...you will get stuck in the splash screen (white screen with the green HTC). Just do as described above, get a rom to the sdcard and then flash it. You are not bricked, you are just stuck
Well, this was just to try to point you in the right direction. If you think that I missed something, feel free to tell me and will add it to the OP.....Salud! :good:
Reserved just in case
Well done glevitan. On a side note, I finally understood how to use adb. Thanks.
Sent from a dream.
Teichopsia said:
Reserved just in case
Well done glevitan. On a side note, I finally understood how to use adb. Thanks.
Sent from a dream.
Click to expand...
Click to collapse
Thanks, let's hope that people find it usefull...
To help your thread going however 'slightly' off topic it may be, but since you did mention adb, I finally managed to get apk multi tool and sdk manager installed, and with a slight hiccup getting the adb to recognize my device (I started all of this last night), I believe I have everything I need?
Now I need to learn what I can do with those.
All of this would have taken me half the time if I were 15 again
Sent from a dream.
Teichopsia said:
To help your thread going however 'slightly' off topic it may be, but since you did mention adb, I finally managed to get apk multi tool and sdk manager installed, and with a slight hiccup getting the adb to recognize my device (I started all of this last night), I believe I have everything I need?
Now I need to learn what I can do with those.
All of this would have taken me half the time if I were 15 again
Sent from a dream.
Click to expand...
Click to collapse
hahaha...ummmm you shouldn't have problems. Just install SDK and apk multi tool in the SDK>tools folder or somewhere else. Then from command prompt you should be able to run the commands for the apk multi tool. I use the apktool and I have no problem at all. The main thing is to have adb installed...but there's no need to have the phone plugged to use the apk tool.
In the case of your device, make sure that u have the HTC drivers installed, if you have HTC Sync, you should have them...to try that just plug the phone as charge only, make sure that usb debugging is on and then open a cmd as admin and type adb devices...you should see your HTCserialnumber....
I didn't know I didn't need to have the cell plugged in, nice to know.
I had done all of that and it was working.... IT WAS WORKING , I decided to move a few folders around, something got messed up, tried placing them where they were, still no go, it's not recognizing my device anymore.
Don't worry, I'll figure it out eventually, but the problem is my head is going to start hurting any minute now. I'll be back shortly to ask you something you mentioned and I've read which I simply don't get - well, maybe not as shortly as I would like.
Edit: whenever I run the adb devices command it has to be done withing the folder where the adb.exe is located, right?
2nd edit: found it and it's working.
To run the adb devices command, which means going to that specific folder, would be seperate from using the apk tool? Would have moving the folders around somehow messed up the way apk tool would work? Im not even sure if im asking the right question
3rd edit: when you said to install the apk tool and sdk in the same folder, well, I already installed both of them to the default location.... what do you mean by that? Should I move them if they are not there? And if I may ask why?
Sent from a dream.
Teichopsia said:
I didn't know I didn't need to have the cell plugged in, nice to know.
I had done all of that and it was working.... IT WAS WORKING , I decided to move a few folders around, something got messed up, tried placing them where they were, still no go, it's not recognizing my device anymore.
Don't worry, I'll figure it out eventually, but the problem is my head is going to start hurting any minute now. I'll be back shortly to ask you something you mentioned and I've read which I simply don't get - well, maybe not as shortly as I would like.
Edit: whenever I run the adb devices command it has to be done withing the folder where the adb.exe is located, right?
2nd edit: found it and it's working.
To run the adb devices command, which means going to that specific folder, would be seperate from using the apk tool? Would have moving the folders around somehow messed up the way apk tool would work? Im not even sure if im asking the right question
3rd edit: when you said to install the apk tool and sdk in the same folder, well, I already installed both of them to the default location.... what do you mean by that? Should I move them if they are not there? And if I may ask why?
Sent from a dream.
Click to expand...
Click to collapse
What I did, that doesn't mean that is the correct way.... I installed SDK and in the tools folder I installed the apktool. You don't need to be in that folder to run the adb command...I don't do it that way...I just run the command from where I am...
glevitan said:
What I did, that doesn't mean that is the correct way.... I installed SDK and in the tools folder I installed the apktool. You don't need to be in that folder to run the adb command...I don't do it that way...I just run the command from where I am...
Click to expand...
Click to collapse
Right now I feel I'm way over my head. And that includes my choice of using eclipse. I'm not even sure what I can do with all these tools...
My hat off to you guys.
Sent from a dream.
Teichopsia said:
Right now I feel I'm way over my head. And that includes my choice of using eclipse. I'm not even sure what I can do with all these tools...
My hat off to you guys.
Sent from a dream.
Click to expand...
Click to collapse
I don't know either....but it is worth trying....see Adam's tutorials...are awesome. Maybe some day I will learn what to do with all this as well!! lol
glevitan said:
I don't know either....but it is worth trying....see Adam's tutorials...are awesome. Maybe some day I will learn what to do with all this as well!! lol
Click to expand...
Click to collapse
Back and forth
I don't believe that was the link you gave me on the other side. Perhaps posting over here will refresh your memory...?
Sent from a dream.
Teichopsia said:
Back and forth
I don't believe that was the link you gave me on the other side. Perhaps posting over here will refresh your memory...?
Sent from a dream.
Click to expand...
Click to collapse
AHH I was talking about Adamsoutler´s tutorial in XDA TV. He explains how to set SDK and develop APKs....it is awesome!..look at the XDA TV thread.
Bump.
Sent from a dream.
not able to go back to stock
I unlocked my htc inspire and tried to root it. Now i ended up with a ccwm recovery and S on unlocked bootloader .
I tried to go back to stock rom and have tried this guide and other guides also but was unsuccessful . My phone is running gizroot v2 but with taht the wifi mac address is unavailable . So i canniot access wifi .
If i put PD98IMG .zip in the root directory then it does not prompt me to any installation in the bootloader .
Please help
krjkinan said:
I unlocked my htc inspire and tried to root it. Now i ended up with a ccwm recovery and S on unlocked bootloader .
I tried to go back to stock rom and have tried this guide and other guides also but was unsuccessful . My phone is running gizroot v2 but with taht the wifi mac address is unavailable . So i canniot access wifi .
If i put PD98IMG .zip in the root directory then it does not prompt me to any installation in the bootloader .
Please help
Click to expand...
Click to collapse
RUUs can not be flashed with an unlocked bootloader. Relock it first, then run the RUU.
Can some one help me. I want to riot my htc inspire 4g
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
romanvaldezo said:
Can some one help me. I want to riot my htc inspire 4g
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
This post is no longer timely. The tool it refers to has been retired. You can no longer get S-Off, but you can unlock the bootloader: http://forum.xda-developers.com/showthread.php?t=2169515.
hey
hey not being mean but you guys dont actually help ive been on this site looking for a tutorial for weeks and cant find one i need to root my htc inspire plzz help
rty123456 said:
hey not being mean but you guys dont actually help ive been on this site looking for a tutorial for weeks and cant find one i need to root my htc inspire plzz help
Click to expand...
Click to collapse
Hey, not being mean, but did you read the post right above yours...? Or anything in the Desire HD forums, which is the same phone and is more populated?
rty123456 said:
hey not being mean but you guys dont actually help ive been on this site looking for a tutorial for weeks and cant find one i need to root my htc inspire plzz help
Click to expand...
Click to collapse
Then are not reading the OP. You have all the information neeeded in there...if your first post in here Is to whine, then you have not Read the rules or understand the spirit of xda.
Follow the instructions And You will be fine, if You don't Get them take time To learn. Nobody Is going To do your homework.
I just recently rooted my inspire it took some time reading and a few attempts to get it down. But after my homework and grasping the concept it was fairly easy.
Sent from my Desire HD using xda app-developers app