I just rooted my ATT One x and I need to install CWM so that I can install Cyanogen mod 10 jelly bean but I cant find any download files for it or any videos on how to do it. If someone can help that'd be great
-thanks
tfig88 said:
I just rooted my ATT One x and I need to install CWM so that I can install Cyanogen mod 10 jelly bean but I cant find any download files for it or any videos on how to do it. If someone can help that'd be great
-thanks
Click to expand...
Click to collapse
CWM is not supported. Flash TWRP found in the Android Development
You need to slow down and relax a little bit. Read more before flashing because this phone seems really easy to brick. There's a thread in development that has all the links you need. Its a sticky
Sent from my VENOMized HoxL
Related
Has anyone seen a Telus version rom floating around for the One S? I'll apologize now if this is the wrong section to post this!
The thread for RUUs is over there:
http://forum.xda-developers.com/showthread.php?t=1543588
If its not listed, PM the OP, I know he have that RUU. He will maybe ask for a donation but you will get it in matter of hours
Sent from my HTC One S using xda premium
Did you have any luck with this after?
The only links I can find to a TELUS RUU for the Ville are to filefactory (where I have to sign up for a $12/month subscription) or a dropbox file that doesn't work to restore my phone.
If you could hook me up with a link that would be stellar.
death link
The link provided in this tread are death any one have those file
I whant to came back stock
Pleas we need a good link
Gw4nM4n said:
The link provided in this tread are death any one have those file
I whant to came back stock
Pleas we need a good link
Click to expand...
Click to collapse
http://www.androidfiles.org/ruu/?dir=Ville
Telus ruu
I don't have a stock RUU for the HTC One S for Telus but you can download [ROM][S4] Android Sense Best Stock v3.0 | Jelly Bean | Sense 4+ | BEST JB from http://forum.xda-developers.com/showthread.php?t=2065357 and it will get your phone up and operating. This is BehradGH Rom Series and here's a big thank you for your work.
I had no operating system at all on my phone and I'm not going to tell you how that happened.
I went into recovery and mounted the SD card. I put the zip file in the TWRP Backup folder and ran it from there. I had trouble rebooting but when I read the directions and flashed the boot image from the ROM and then rebooted, it booted and everything went well and I'm using the phone now.
AJLucas said:
Has anyone seen a Telus version rom floating around for the One S? I'll apologize now if this is the wrong section to post this!
Click to expand...
Click to collapse
This site has a lot of RUUs, including a couple of Telus ones:
http://www.androidruu.com/index.php?developer=Ville
Hey Guys,
I currently have this phone and have installed the 4.0.4 ICS update from Bell. However, I just realized that I am not able to install CWM on this 4.0.4 which is very disappointing. I tried to follow the rooting procedure but I kept encountering stock boot which does now allow me to install ZIP for root/super user. One of my buddy told me that I have to downgrade. Can anybody confirm that. It seems like all the rooting procedures are only for gingerbread 2.3.4-2.3.6. If anybody can help me, much appreciated. Thx in advance
It will not work (someone correct me if im wrong) because you have the HD LTE version and this forum is for just the LTE version.
Sent from my SGH-I727R using xda premium
Crinkypops said:
It will not work (someone correct me if im wrong) because you have the HD LTE version and this forum is for just the LTE version.
Sent from my SGH-I727R using xda premium
Click to expand...
Click to collapse
U are correct. OP, u are in the wrong sub section, find the correct section for your phone
icenight89 said:
U are correct. OP, u are in the wrong sub section, find the correct section for your phone
Click to expand...
Click to collapse
But the skyrocket is basically the HD LTE without the HD screen, these two devices are crosslisted and always mentioned in the same discussions.
Not sure if the same applies to SR HD but I would lean towrd it's similar ...
Use ODIN to flash CWM recovery (use .tar format NOT .img = search the development section "sk8.... recovery")..Check only auto reboot in ODIN and click PDA tab and point the browser toward the .tar recovery then click start ... It will reboot automatically ...
Reboot again into recovery and install the zip for rooting , reboot , open SU and update as it asks you , you're done
See Vincom's thread about all that....It's sticky in SR forums development ..
Hit Thanks if I helped you , an idiot was bragging on me on how many thanks he has compaired to his posts count forgetting that , unfortunately ,too many douches are here on the forums like himself(he has a sig like McDonald's billboard on the interstate saying "Hit thanks button" ...
element219 said:
Hey Guys,
I currently have this phone and have installed the 4.0.4 ICS update from Bell. However, I just realized that I am not able to install CWM on this 4.0.4 which is very disappointing. I tried to follow the rooting procedure but I kept encountering stock boot which does now allow me to install ZIP for root/super user. One of my buddy told me that I have to downgrade. Can anybody confirm that. It seems like all the rooting procedures are only for gingerbread 2.3.4-2.3.6. If anybody can help me, much appreciated. Thx in advance
Click to expand...
Click to collapse
you just need to downgrade back to the stock GB rom and then load the cwm and it will work perfectly, thats what happen to me this morning.
Maybe I need to refrain responding here for SGH-i757m, but please refer the the following thread.
http://forum.xda-developers.com/showthread.php?t=1707126
XT 925 jb 4.1.2 UL boot loader-Rooted via this method:
http://forum.xda-developers.com/showthread.php?t=2118483
save Android Newbie some time by answering some questions please:
When Rooting I did make a backup with cwmrecovery6028-xt925_20130219-epinter.img, Can the back up be moved to PC ?
Shall CMN get updated or leave it alone? if so , to what do I need to upgrade to?
Same with SU, any need to update ? used CWM-SuperSU-v0.99.zip
Any benefit from SU elite ?
Installed voodo, do u recommend any particular procedure?
Did another backup with Titanium Pro and carbons, moved both to PC, any recommendation?
Looking for 1% battery increments on notification bar too?
I believe I have the Rola HD where I wanted now with Apps, GPS... , but am open for any recommendations.
:good:
Coming from very old windows smartphones and iphone , I like Droid betta and definitely ROLA HD
Thanks to the XDA community and hopefully you guys wouldn't mind my thread and questions posted here.
Gracias
For any newbie that comes after me:
Yes you can ROOT MOTO HD JB on 4.1.2, just follow link I posted above and thank original poster.
Tricky part I came to was downloading ANDROID SDK WINDOWS
Getting the ROLA into recovery mode
flashing CWM- fellas, u need to run CMD in your pc inside of PLATFORM tools
I will be happy to answer if anyone need help.:good:
hbenz2008 said:
For any newbie that comes after me:
I will be happy to answer if anyone need help.:good:
Click to expand...
Click to collapse
So, man, I'm trying to update my Razr HD to JB.
I am rooted on ICS, and plan on installing the JB service version I got from here: http://forum.xda-developers.com/showthread.php?t=2095097
The thing is: as I haven't unlocked my bootloader, and would like to keep it that way, I've been trying to install the safestrap recovery I got from here: http://blog.hash-of-codes.com/downloads/safestrap/
But up till now, I've been receiving a FAILED message when installing the rom in the rom-slot-1.
Don't know where i'm going wrong. Any ideas? Or any other way I could install the ----- Android 4.1.2 Jelly Bean - 98.21.6.XT925.Brasil.en.BR -----
Service Version?
Thanks!
not sure if voodoo root keeper will survive jb 4.1.2 , look into that , also I suggest to post here
http://forum.xda-developers.com/showthread.php?t=1973904
good luck man,
I have download OTA ICS for Desire and it has a one thing name ''firmware'' how i can do with it??? help me please
chryzto said:
I have download OTA ICS for Desire and it has a one thing name ''firmware'' how i can do with it??? help me please
Click to expand...
Click to collapse
You really need to search and read so you can understand what you're doing and asking.
Also, the official ICS was rubbish - slow, flaky, not good. If you want ICS then flash one of the many good Custom ROMs instead.
I will back what Simon has said... if u still havent rooted yet... root ur phone... try to Get S-off , instructions can be found be in Development Section, Dont go for official OTA... i installed it and believe me it was a pain in a** . Once S-OFF u can flash many Roms out here and figure which onces best for u ...Happy Flashing
I have stock 4.4.2 android on my phone. I have no idea what to do. I couldn't find a video or anything to guide me through it. Can someone explain it or maybe link a video or forum post?
Blayton said:
I have stock 4.4.2 android on my phone. I have no idea what to do. I couldn't find a video or anything to guide me through it. Can someone explain it or maybe link a video or forum post?
Click to expand...
Click to collapse
Can't be done. Once you are on stock 4.4.2 with the locked bootloader, you cannot install any AOSP ROMs. You can run safestrap and there is currently only one 4.4.2 touchwiz based ROM to run through safestrap.
Sent from the Shark Tank using XDA Premium 4 mobile app
The first thing you need to do is root your phone. Use towel root (Google it).
[signature] thanks xda, I appreciate all the help [\signature]