I installed and flashed the latest update of Jellybam on my HTC One X and the installation was successful. However after rebooting an error message keeps displaying saying the core process stopped working. what do i do?
jahangir22 said:
I installed and flashed the latest update of Jellybam on my HTC One X and the installation was successful. However after rebooting an error message keeps displaying saying the core process stopped working. what do i do?
Click to expand...
Click to collapse
Flash 4.1.0 or 4.0.0
DvineLord said:
Flash 4.1.0 or 4.0.0
Click to expand...
Click to collapse
I flashed the older rom i had (4.0.0) and it wont go past the boot screen
jahangir22 said:
I flashed the older rom i had (4.0.0) and it wont go past the boot screen
Click to expand...
Click to collapse
what hboot are you on? when flashing it were you coming from another rom? did you wipe cache dalvik and factory reset? i always wipe system but i notice most people here dont without issues. need moar info!
exad said:
what hboot are you on? when flashing it were you coming from another rom? did you wipe cache dalvik and factory reset? i always wipe system but i notice most people here dont without issues. need moar info!
Click to expand...
Click to collapse
I wasn't coming from another rom. I was updating jellybam. I had the 4.0.0 installed. I flashed 5.2.1 and it wouldn't work so i flashed 4.0.0 again. I cleared dalvik cache while flashing 5.2.1.
I full wipe everything when going to new rom, even external if i think the cache files are dirting things up.
jahangir22 said:
I wasn't coming from another rom. I was updating jellybam. I had the 4.0.0 installed. I flashed 5.2.1 and it wouldn't work so i flashed 4.0.0 again. I cleared dalvik cache while flashing 5.2.1.
Click to expand...
Click to collapse
still dont know what hboot youre on. did you try fastboot flashing the boot.img? may be best to just start fresh. clear cache, dalvik, system, factory reset. make sure md5 or sha1 match and maybe redownload just to be safe then reflash and if on a newer hboot fastboot flash the boot.img
exad said:
still dont know what hboot youre on. did you try fastboot flashing the boot.img? may be best to just start fresh. clear cache, dalvik, system, factory reset. make sure md5 or sha1 match and maybe redownload just to be safe then reflash and if on a newer hboot fastboot flash the boot.img
Click to expand...
Click to collapse
Thats the thing. I want to start fresh but i cannot get into recovery. I've tried everything but the phone just restarts and gets stuck at the boot screen. I cannot do it through my laptop either since it won't recognize the phone.
jahangir22 said:
Thats the thing. I want to start fresh but i cannot get into recovery. I've tried everything but the phone just restarts and gets stuck at the boot screen. I cannot do it through my laptop either since it won't recognize the phone.
Click to expand...
Click to collapse
can you get into the bootloader? press and hold power and volume down until you eventually get into bootloader.
exad said:
can you get into the bootloader? press and hold power and volume down until you eventually get into bootloader.
Click to expand...
Click to collapse
Tried that as well. it shuts down and once i leave the power and volume button it just restarts and same thing all over again
jahangir22 said:
Tried that as well. it shuts down and once i leave the power and volume button it just restarts and same thing all over again
Click to expand...
Click to collapse
yeah. dont let go. until it gets into bootloader. it powers off for like 7 seconds just keep holding until the bootloader comes up.
jahangir22 said:
Tried that as well. it shuts down and once i leave the power and volume button it just restarts and same thing all over again
Click to expand...
Click to collapse
I was finally able to get in the recovery and was able to restore the backup. Thank you for helping me out!
exad said:
yeah. dont let go. until it gets into bootloader. it powers off for like 7 seconds just keep holding until the bootloader comes up.
Click to expand...
Click to collapse
scratch that. when the screen turns off let go. count to 3 then press and hold again. make sure phone is not plugged in to power while doing this.
---------- Post added at 02:49 PM ---------- Previous post was at 02:49 PM ----------
jahangir22 said:
I was finally able to get in the recovery and was able to restore the backup. Thank you for helping me out!
Click to expand...
Click to collapse
ah good. no problem.
Related
I flashed AOKP 1.4 earlier today coming off of TN Special Edition, but decided i didnt like it. I then did a factory reset and flashed Cleanrom 5 and SP1, but my phone just boots into the cleanrom boot screen, says no signal, and thjen flashes pop-ups such as "com.android.phone has stopped" and "android.process.acore" has stopped" before continuously rebooting. The RUU would not work. Please help, I am panicking!
Gosfgiants said:
I flashed AOKP 1.4 earlier today coming off of TN Special Edition, but decided i didnt like it. I then did a factory reset and flashed Cleanrom 5 and SP1, but my phone just boots into the cleanrom boot screen, says no signal, and thjen flashes pop-ups such as "com.android.phone has stopped" and "android.process.acore" has stopped" before continuously rebooting. The RUU would not work. Please help, I am panicking!
Click to expand...
Click to collapse
did you ever take the 2.20 update?
If so did you remember to flash the boot.img in fast boot?
If that's not the problem maybe a bad flash? go to recovery again and re-wipe then reflash
gunnyman said:
did you ever take the 2.20 update?
If so did you remember to flash the boot.img in fast boot?
If that's not the problem maybe a bad flash? go to recovery again and re-wipe then reflash
Click to expand...
Click to collapse
No i never took an OTA update, but i am on 2.29 instead of stock 1.85. In the aroma installer in Cleanrom i did click flash boot.img ( or i think i did anyway, i clicked "Yes") How do i boot into fastboot? I usually use the extended power settings, but it reboots before i can do that. Also when flahsing the RUU, it says failed, but it also says that i should be at the HTC screen with exclamation points in each corner, but those exclamation points dont appear.
Gosfgiants said:
No i never took an OTA update, but i am on 2.29 instead of stock 1.85. In the aroma installer in Cleanrom i did click flash boot.img ( or i think i did anyway, i clicked "Yes") How do i boot into fastboot? I usually use the extended power settings, but it reboots before i can do that. Also when flahsing the RUU, it says failed, but it also says that i should be at the HTC screen with exclamation points in each corner, but those exclamation points dont appear.
Click to expand...
Click to collapse
just ref lash it. You never took the OTA which means your HBOOT is still the old one. I bet you didn't say yes to boot.img
gunnyman said:
just ref lash it. You never took the OTA which means your HBOOT is still the old one. I bet you didn't say yes to boot.img
Click to expand...
Click to collapse
Are you talking about Cleanrom or the RUU? It reboots into the set up screen whenever i try to boot into bootloader (By holding power and the volume rocker), but that quickly crashes and reboots into the same screen again, so i don't know how i would be able to reflash it. If you are talking about the RUU, I have tried reflashing it three times, and every time it says "Utility can not update device"
Gosfgiants said:
Are you talking about Cleanrom or the RUU? It reboots into the set up screen whenever i try to boot into bootloader (By holding power and the volume rocker), but that quickly crashes and reboots into the same screen again, so i don't know how i would be able to reflash it. If you are talking about the RUU, I have tried reflashing it three times, and every time it says "Utility can not update device"
Click to expand...
Click to collapse
hmm
so you can't get into the bootloader at all?
which RUU are you trying to run?
gunnyman said:
hmm
so you can't get into the bootloader at all?
which RUU are you trying to run?
Click to expand...
Click to collapse
I cant figur eout a way too, and i am trying to flahs the 1.85 RUU,which i have used before.
this happened to me yesterday going from TN SE 3.7RC1 to the stable 3.7. I was able to get into recovery though, wipe everything, and get back up and running (but did not run a TB beforehand :crying Don't know what caused the bootloop though.
Gosfgiants said:
I cant figur eout a way too, and i am trying to flahs the 1.85 RUU,which i have used before.
Click to expand...
Click to collapse
ok so your phone powers up into a bootloop is that right?
Do you ever see a screen after the HTC screen with the red writing on it? If you do, plug in the phone and open a command prompt. I assume you have ADB installed. If you don't see the link to ADB/Fastboot in my signature.
Anyway, when you see the screen after the HTC screen with the red warning on it, type adb reboot recovery. THAT should get you back to twrp and let you ref reflash.
gunnyman said:
ok so your phone powers up into a bootloop is that right?
Do you ever see a screen after the HTC screen with the red writing on it? If you do, plug in the phone and open a command prompt. I assume you have ADB installed. If you don't see the link to ADB/Fastboot in my signature.
Anyway, when you see the screen after the HTC screen with the red warning on it, type adb reboot recovery. THAT should get you back to twrp and let you ref reflash.
Click to expand...
Click to collapse
Alright, i am donwloading the SDK. Is there anyway to make it go faster i am installing the 4.03 and 4.1 using the SDK manager, and it is taking a while. Or is there a way to just download ADB? I have an old script called ADB that i used to root with.
Gosfgiants said:
Alright, i am donwloading the SDK. Is there anyway to make it go faster i am installing the 4.03 and 4.1 using the SDK manager, and it is taking a while. Or is there a way to just download ADB? I have an old script called ADB that i used to root with.
Click to expand...
Click to collapse
Look at my thread. There's an attachment with all you'll need
gunnyman said:
Look at my thread. There's an attachment with all you'll need
Click to expand...
Click to collapse
Ya i see that now, sorry about that. whenever i try to run ADB, it juts rapidly runs a script and shuts down though.
Gosfgiants said:
Ya i see that now, sorry about that. whenever i try to run ADB, it juts rapidly runs a script and shuts down though.
Click to expand...
Click to collapse
adb is a program that needs a command
adb reboot recovery for example.
gunnyman said:
adb is a program that needs a command
adb reboot recovery for example.
Click to expand...
Click to collapse
Yes! thank you so much! I was able to rbeoot into recovery! so now just reflash Cleanrom?
Yep.
gunnyman said:
Yep.
Click to expand...
Click to collapse
Gunny, you're a smart guy. Please, please help me out here. I'm offering a literal cash reward for help with this.
http://forum.xda-developers.com/showthread.php?p=31365825#post31365825
Hi, I was on CleanRom 5.1, flashed to ViperXL 3.1, but then I flashed back to CleanRom, and now my phone wont boot pass the "X" nexus logo. I hold down "power+volume", but it restarted the phone and repeated the same boot loop. What can I do to solve this? Thank you very much.
Did you full wipe?
1. Did you unlock your bootloader?
2. Power off your phone completely, and then hit the power+volume keys to turn it on and into recovery, sometimes it works better that way
Deleted read again just full wipe
Ok. I got it to boot into recover mode. FYI, my HBoot is 1.09. I can't find the Custom Roms file on my phone any more. What can i do to install a custom rom now?
Did you full wipe?
Click to expand...
Click to collapse
Yes, I believe I did a full wipe.
Did you unlock your bootloader?
Click to expand...
Click to collapse
Yes, I did
did you flash your boot img for viper through fastboot?
Click to expand...
Click to collapse
No, I did not flash a boot.img for viper.
tonie972 said:
Ok. I got it to boot into recover mode. FYI, my HBoot is 1.09. I can't find the Custom Roms file on my phone any more. What can i do to install a custom rom now?
Yes, I believe I did a full wipe.
Yes, I did
No, I did not flash a boot.img for viper.
Click to expand...
Click to collapse
Did you have twrp recovery?
tactical kitten said:
Did you have twrp recovery?
Click to expand...
Click to collapse
Yes
tonie972 said:
Yes
Click to expand...
Click to collapse
Well wipe system factory reset wipe caches than flash again
tactical kitten said:
Well wipe system factory reset wipe caches than flash again
Click to expand...
Click to collapse
How do I move the rom into the SD?
tonie972 said:
How do I move the rom into the SD?
Click to expand...
Click to collapse
What version of twrp r u on? But you should be able to mount storage in twrp
TWRP 2.3.1 - Format the SD and transferring Rom to SD. How do I flash the boot.img via fastboot?
What i always do and dont even care about if im flashing the same rom or a new is this:
Wipe Data/Factory Reset
Wipe System / Dalvik Cache / Cache
Flash boot.img
Flash ROM
Flash Gapps
Wipe Cache / Dalvik Cache
Reboot
It doesnt take you a lot of time and its going to work prety much every single time
You don't have to you're on hboot 1.09 ...but in clean roms aroma make sure you say to install boot img
well thats the point with all the roms that are out there haha you clean everything, always flash the boot.img, so you will never have to worry about if its gonna bootloop because of a different kernel or another file from another rom, the peace of mind of knowning your device its fully clean, besides it takes like 10 seconds more to do that
tried it again and it worked! thank you all!
pikul said:
well thats the point with all the roms that are out there haha you clean everything, always flash the boot.img, so you will never have to worry about if its gonna bootloop because of a different kernel or another file from another rom, the peace of mind of knowning your device its fully clean, besides it takes like 10 seconds more to do that
Click to expand...
Click to collapse
When you wipe system in pretty sure it wipes kernel so no harm he diesnt have to go through the hassle of fastboot
tactical kitten said:
When you wipe system in pretty sure it wipes kernel so no harm he diesnt have to go through the hassle of fastboot
Click to expand...
Click to collapse
If you are on hboot<1.14, boot.img will be flashed automatically. So I agree that flashing boot.img "just in case" is pointless.
System always gets wiped when flashing the ROM, so again it doesn't need to be done separately.
---------- Post added at 02:12 PM ---------- Previous post was at 02:08 PM ----------
tonie972 said:
I hold down "power+volume", but it restarted the phone and repeated the same boot loop.
Click to expand...
Click to collapse
Unless you have a corrupt hboot, not being able to get into hboot is almost always a matter of pilot error.
People simply don't get the button sequence right. Hold volume down and keep holding it. Press power button for 3 seconds and release. Or if its stuck powered on on the splash screen, press power until the capacitive keys flash and the phone reboots. Keep holding volume down rocker until white hboot screen comes up. I think most people think you release power and vol down at the same time.
I rooted my phone and used firewater to get S-OFF (a lifesaver), then unfortunately installed a TWRP recovery that has completely messed up the device. It wouldn't respond at all and I was lucky enough to flash CWM when I got it back to bootloader. Now, at least I do have a recovery to work from.
I can't do a factory reset (just goes back to recovery), can't sideload a new ROM, and tried to flash a new boot.img and system.img from here:http://forum.xda-developers.com/showthread.php?t=2706233
None of these have worked and I'm at a loss in terms of what else I can do to get the phone working again. Any ideas????
Alex
Bump
Sent from my HTC One M8!
U WOT M8?
AP26322 said:
I rooted my phone and used firewater to get S-OFF (a lifesaver), then unfortunately installed a TWRP recovery that has completely messed up the device. It wouldn't respond at all and I was lucky enough to flash CWM when I got it back to bootloader. Now, at least I do have a recovery to work from.
I can't do a factory reset (just goes back to recovery), can't sideload a new ROM, and tried to flash a new boot.img and system.img from here:http://forum.xda-developers.com/showthread.php?t=2706233
None of these have worked and I'm at a loss in terms of what else I can do to get the phone working again. Any ideas????
Alex
Click to expand...
Click to collapse
Have you tried pushing back the stock recovery and then doing a factory reset?
droidkevlar said:
Have you tried pushing back the stock recovery and then doing a factory reset?
Click to expand...
Click to collapse
I have not. Where can I find the stock recovery?
AP26322 said:
I have not. Where can I find the stock recovery?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2708291
Stock recovery, boot and hboot are in there. I would start with the boot, then recovery, and then factory reset.
droidkevlar said:
http://forum.xda-developers.com/showthread.php?t=2708291
Stock recovery, boot and hboot are in there. I would start with the boot, then recovery, and then factory reset.
Click to expand...
Click to collapse
Thanks so much. Installed the boot, then recovery and it's back to working like a charm. Great to know all of these .imgs are in one place, too. You're a lifesaver!
http://forum.xda-developers.com/showthread.php?t=2708291
Try it.
AP26322 said:
Thanks so much. Installed the boot, then recovery and it's back to working like a charm. Great to know all of these .imgs are in one place, too. You're a lifesaver!
Click to expand...
Click to collapse
NP
I have rooted my OnePlus One a few days back. There was an update to 11.0-XNPH30O. When I hit the install button, it redirects me to the Team Win recovery mode. Then when I hit reboot, system. It still says "An update is available for your system" Do I have to flash a newer ROM? I'm sorry, I am really new to this as this is my first android phone, what are the precautions and pre-requisites I have to do? Will this wipe my phone? Do I have to manually wipe it? I'm sorry for these questions..
Thank you in advance.
skyhonor said:
I have rooted my OnePlus One a few days back. There was an update to 11.0-XNPH30O. When I hit the install button, it redirects me to the Team Win recovery mode. Then when I hit reboot, system. It still says "An update is available for your system" Do I have to flash a newer ROM? I'm sorry, I am really new to this as this is my first android phone, what are the precautions and pre-requisites I have to do? Will this wipe my phone? Do I have to manually wipe it? I'm sorry for these questions..
Thank you in advance.
Click to expand...
Click to collapse
Did you check the current build on the phone, because there are two OTA's (one major and one minor). if you see 30O build on your about settings and yet you see an update available it is the small update. if you are still on 25R go to developer options and uncheck "update CM recovery" and try to do the OTA update again.
vamshi88 said:
Did you check the current build on the phone, because there are two OTA's (one major and one minor). if you see 30O build on your about settings and yet you see an update available it is the small update. if you are still on 25R go to developer options and uncheck "update CM recovery" and try to do the OTA update again.
Click to expand...
Click to collapse
I am still on 25R, the update CM Recovery option was unchecked and when I went to install update, it says XNPH30O Incremental. I press install update and it boots me to the TeamWin recovery
skyhonor said:
I am still on 25R, the update CM Recovery option was unchecked and when I went to install update, it says XNPH30O Incremental. I press install update and it boots me to the TeamWin recovery
Click to expand...
Click to collapse
why not just sideload the incremental. you can find the zip here.
http://forum.xda-developers.com/oneplus-one/general/cm-11s-30o-ota-slowly-rolling-t2844689
vamshi88 said:
why not just sideload the incremental. you can find the zip here.
http://forum.xda-developers.com/oneplus-one/general/cm-11s-30o-ota-slowly-rolling-t2844689
Click to expand...
Click to collapse
Will I have to wipe my phone first? I don't want to wipe it though.
skyhonor said:
Will I have to wipe my phone first? I don't want to wipe it though.
Click to expand...
Click to collapse
No you dont have to wipe anything(if you are on stock 25R), all apps and settings will be intact. Also did you make any changes like to mixer xml or lockscreen or anything else? you have to revert back to old ones or else the installation will fail.
vamshi88 said:
No you dont have to wipe anything(if you are on stock 25R), all apps and settings will be intact. Also did you make any changes like to mixer xml or lockscreen or anything else? you have to revert back to old ones or else the installation will fail.
Click to expand...
Click to collapse
I don't think so, but I did install nova theme and widgets, franco.kernel, smoothscrolling mod, and the 1+Volume Increase, will this affect anything? What is the difference between stock 25R and twrp? (I used twrp to root my phone) Also, what do you mean by "or else the installation will fail?" does that equal bricking phone or there will be a message that says "the installation has failed."
Thanks.
skyhonor said:
I don't think so, but I did install nova theme and widgets, franco.kernel, smoothscrolling mod, and the 1+Volume Increase, will this affect anything? What is the difference between stock 25R and twrp? (I used twrp to root my phone) Also, what do you mean by "or else the installation will fail?" does that equal bricking phone or there will be a message that says "the installation has failed."
Thanks.
Click to expand...
Click to collapse
the "franco.kernel, smoothscrolling mod, and the 1+Volume Increase" are mods so you will have to revert back to stock. if you dont want to/know how to revert back to stock then this thread can help you.
http://forum.xda-developers.com/oneplus-one/general/ota-8-17-cm11sfixed-zip-ota-to-stock-t2845075
Before you do anything read step 6 in this post just to understand what you are doing.
http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
after reading the thread if you need any help let me know.
vamshi88 said:
the "franco.kernel, smoothscrolling mod, and the 1+Volume Increase" are mods so you will have to revert back to stock. if you dont want to/know how to revert back to stock then this thread can help you.
http://forum.xda-developers.com/oneplus-one/general/ota-8-17-cm11sfixed-zip-ota-to-stock-t2845075
Before you do anything read step 6 in this post just to understand what you are doing.
http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
after reading the thread if you need any help let me know.
Click to expand...
Click to collapse
I have read it but it kind of confuses me a bit.
I have already flashed the META-INF.zip, so I'm guessing all the mods I put should be gone now.
Now I'm wondering, can I just transfer the cm-bacon-d22b777afa-to-0428073396-signed.zip (113mb file) to the phone and install it using TeamWin? After I reboot and power off/and power back on. then transfer the cm-bacon-0428073396-to-4f280f505a-signed.zip (8.12mb file) to the phone and install it using TeamWin.
Will this work too? Thank you for helping, really means a lot.
skyhonor said:
I have read it but it kind of confuses me a bit.
I have already flashed the META-INF.zip, so I'm guessing all the mods I put should be gone now.
Now I'm wondering, can I just transfer the cm-bacon-d22b777afa-to-0428073396-signed.zip (113mb file) to the phone and install it using TeamWin? After I reboot and power off/and power back on. then transfer the cm-bacon-0428073396-to-4f280f505a-signed.zip (8.12mb file) to the phone and install it using TeamWin.
Will this work too? Thank you for helping, really means a lot.
Click to expand...
Click to collapse
Before you do anything Take a Nandroid back up, so that if anything goes bad you can just restore.
OK. Just download this zip and flash it using TWRP(since the post says you can do it without sideload).
https://docs.google.com/file/d/0BzgUrWZ7XZ0rcDA2YVZLZUY0YkU/edit
after this is flashed just reboot the device and go to developer options uncheck "update CM recovery" then go to "about" and look for update and it will be installed with no problems.
****NOTE****
If you run into a bootloop. Wipe both caches and try flashing again. If you get any FC then try setting permissions with another cache wipe.
vamshi88 said:
Before you do anything Take a Nandroid back up, so that if anything goes bad you can just restore.
OK. Just download this zip and flash it using TWRP(since the post says you can do it without sideload).
https://docs.google.com/file/d/0BzgUrWZ7XZ0rcDA2YVZLZUY0YkU/edit
after this is flashed just reboot the device and go to developer options uncheck "update CM recovery" then go to "about" and look for update and it will be installed with no problems.
****NOTE****
If you run into a bootloop. Wipe both caches and try flashing again. If you get any FC then try setting permissions with another cache wipe.
Click to expand...
Click to collapse
It said sideloading 100% in the command prompt (PC. But It says sideload failed on the phone, I will try flashing it using TWRP, a bit later. Thank you for helping.
vamshi88 said:
Before you do anything Take a Nandroid back up, so that if anything goes bad you can just restore.
OK. Just download this zip and flash it using TWRP(since the post says you can do it without sideload).
https://docs.google.com/file/d/0BzgUrWZ7XZ0rcDA2YVZLZUY0YkU/edit
after this is flashed just reboot the device and go to developer options uncheck "update CM recovery" then go to "about" and look for update and it will be installed with no problems.
****NOTE****
If you run into a bootloop. Wipe both caches and try flashing again. If you get any FC then try setting permissions with another cache wipe.
Click to expand...
Click to collapse
I ran into a bootloop like you predicted, how do I wipe both caches?
skyhonor said:
I ran into a bootloop like you predicted, how do I wipe both caches?
Click to expand...
Click to collapse
In TWRP go to WIPE>Advanced Wipe, in there check cache and Dalvik cache and swipe to wipe and reboot.
vamshi88 said:
In TWRP go to WIPE>Advanced Wipe, in there check cache and Dalvik cache and swipe to wipe and reboot.
Click to expand...
Click to collapse
It's not a bootloop the CM gear icon just keeps on spinning. How long do I have to wait? It's been spinning for a while now.
skyhonor said:
It's not a bootloop the CM gear icon just keeps on spinning. How long do I have to wait? It's been spinning for a while now.
Click to expand...
Click to collapse
TeamWin is still accessible though. I guess I'll have to Factory reset.
skyhonor said:
It's not a bootloop the CM gear icon just keeps on spinning. How long do I have to wait? It's been spinning for a while now.
Click to expand...
Click to collapse
it shouldn't take long, leave it for 10mins. if it is still stuck hold the power button for 10 sec or untill the screen goes off then hold power + volume down button untill 1+ logo appears then clear the caches as said above.
vamshi88 said:
it shouldn't take long, leave it for 10mins. if it is still stuck hold the power button for 10 sec or untill the screen goes off then hold power + volume down button untill 1+ logo appears then clear the caches as said above.
Click to expand...
Click to collapse
Okay I will come back in 10 minutes.
skyhonor said:
Okay I will come back in 10 minutes.
Click to expand...
Click to collapse
It has been over 15 minutes... I think I'm experiencing what is called a soft brick? What can I do. I'm somewhat in panic mode.:crying:
skyhonor said:
It has been over 15 minutes... I think I'm experiencing what is called a soft brick? What can I do. I'm somewhat in panic mode.:crying:
Click to expand...
Click to collapse
did you power it off as i said.
vamshi88 said:
did you power it off as i said.
Click to expand...
Click to collapse
yes device is powered off now. I didn't do a Nandroid backup because I have titanium backup.
What's up everyone. So I went the flash an update of the ROM I've been running and ran into an issue after wiping and performing a factory reset. When I went to select the rom, twrp etc. all of the file were jumbled and just random letters and numbers!! I tried switching from A to B and that didn't work. I've tried everything but am stuck and really hoping someone can help me out!!
mpetruzz said:
What's up everyone. So I went the flash an update of the ROM I've been running and ran into an issue after wiping and performing a factory reset. When I went to select the rom, twrp etc. all of the file were jumbled and just random letters and numbers!! I tried switching from A to B and that didn't work. I've tried everything but am stuck and really hoping someone can help me out!!
Click to expand...
Click to collapse
TWRP is failing to un-encrypt. It happens, to some. Full power off and you should be ok. May take a few tries.
TonikJDK said:
TWRP is failing to un-encrypt. It happens, to some. Full power off and you should be ok. May take a few tries.
Click to expand...
Click to collapse
Thanks, what do you mean full power off?
mpetruzz said:
Thanks, what do you mean full power off?
Click to expand...
Click to collapse
Power the phone down instead if just rebooting it.
TonikJDK said:
TWRP is failing to un-encrypt. It happens, to some. Full power off and you should be ok. May take a few tries.
Click to expand...
Click to collapse
TonikJDK said:
Power the phone down instead if just rebooting it.
Click to expand...
Click to collapse
Gotcha, yeah I've tried that quite a few times and it's still not working.
Keep rebooting​ to recovery, sometimes it takes 3-10 times, you'll get it
Sent from my Pixel using XDA-Developers Legacy app
piperx said:
Keep rebooting​ to recovery, sometimes it takes 3-10 times, you'll get it
Sent from my Pixel using XDA-Developers Legacy app
Click to expand...
Click to collapse
I noticed my battery was under 50 so i charged it and am going to give it another go now
been at it for about 15 minutes and it's still not working. Anything else that might work??
I've personally never had to do it over 3 times
Sent from my Pixel using XDA-Developers Legacy app
mpetruzz said:
been at it for about 15 minutes and it's still not working. Anything else that might work??
Click to expand...
Click to collapse
Do you have a PIN set? If not you need that I believe.
You don't need a pin, since I've had this phone, odered first day available, I've never made/used a pin
Sent from my Pixel using XDA-Developers Legacy app
I've tried all night and cannot get it too work. I'm thinking I'm going to need to re flash the software. I don't have a pin always used the swipe pattern.
Anyone help out with the easiest way to do just start fresh??
mpetruzz said:
I've tried all night and cannot get it too work. I'm thinking I'm going to need to re flash the software. I don't have a pin always used the swipe pattern.
Anyone help out with the easiest way to do just start fresh??
Click to expand...
Click to collapse
Did you try flashing twrp again.
TheBurgh said:
Did you try flashing twrp again.
Click to expand...
Click to collapse
Can I flash it while in boot loader mode from my laptop??
Have you try fastboot to twrp via twrp img again, I had this problem a couple times and I just redone booting into twrp via the img file
Try again "fastboot boot twrp.img" and reflash rc1.zip
If issue still persist try reflash factory image (it will clean A/B partition with stock files) and then again "fastboot boot twrp.img" and flash rc1.zip
This should make twrp boot like new, give it a try.
TENN3R said:
Try again "fastboot boot twrp.img" and reflash rc1.zip
If issue still persist try reflash factory image (it will clean A/B partition with stock files) and then again "fastboot boot twrp.img" and flash rc1.zip
This should make twrp boot like new, give it a try.
Click to expand...
Click to collapse
Yup, decided to start fresh and it's working. Didn't want to have to do that but man she wasn't cooperating last night!!!
mpetruzz said:
Yup, decided to start fresh and it's working. Didn't want to have to do that but man she wasn't cooperating last night!!!
Click to expand...
Click to collapse
Glad you got it up n running