[Q] Dead boot, Wrong flashed firmware on Fei-Teng S3 mt6575 - General Questions and Answers

Hello! Everyone... Help me!.. Sorry for my bad english!... i flashed wrong preloader on my mtk 6575 S3 Clone. It's Fei-Teng. Pls guide me .. how can i restore stock rom on my phone!... :crying: Most of online forum show me there's no way to recover it. But i believe our xda must hv the soluton!.. Thanks in advanced!

phyoewai said:
Hello! Everyone... Help me!.. Sorry for my bad english!... i flashed wrong preloader on my mtk 6575 S3 Clone. It's Fei-Teng. Pls guide me .. how can i restore stock rom on my phone!... :crying: Most of online forum show me there's no way to recover it. But i believe our xda must hv the soluton!.. Thanks in advanced!
Click to expand...
Click to collapse
Hi.. Guys!
There's no one to answer me! but i found this thread http://forum.xda-developers.com/showthread.php?p=34912486#5 n i get my phone alive back as fastboot mode ( maybe download mode) ... ! thx millon for the deveolper who post that thread!.. i still difficult to flash the preloader file cuz i found every roms as cwm flashable zip. Can anyone tell me how can i generat scatter file from cwm flashable zip!. pls pls.. i'm awaiting... thx in advanced!

foloow his
phyoewai said:
Hi.. Guys!
There's no one to answer me! but i found this thread http://forum.xda-developers.com/showthread.php?p=34912486#5 n i get my phone alive back as fastboot mode ( maybe download mode) ... ! thx millon for the deveolper who post that thread!.. i still difficult to flash the preloader file cuz i found every roms as cwm flashable zip. Can anyone tell me how can i generat scatter file from cwm flashable zip!. pls pls.. i'm awaiting... thx in advanced!
Click to expand...
Click to collapse
http://www.chinaphonearena.com/forum/Thread-Hard-bricked-mt6589-plz-help

Related

My Device Is Not Working..... pls Help pls....

Hello Sir,
First of alll i am sorry for my bad english...
I have a Karbonn A1 device non rooted....with stock rom and stock recovery..
But Few days ago I got all software such as the rom flashing tool i.e."Common Downloader" and also the stock rom files such as recovery.img, userdata.img, system.img etc. I also downloaded stock rom files of Sony Ericsson W8..... so while installing stock rom on my Karbonn A1... I replaced Karbonn's system.img with Xperia w8's system.img..... while installing at 91% it showed "download fail"..... and my device restarts...
Now my device has started but system force closes after every 2 seconds.... When I think to again install the stock rom back.... My computer does not showing COM Port of my device... also my stock recovery is working..... So Pls pls pls ps Help If any one knows how to solve this problem.....
Pls HElp Sir Pls Help pls Help..
All ideas are appreciated..
Thank You... pls rply me fast.. Pls sir
Sir I have downloaded its original rom and original flashing tool......
What I have to do next.....
Because flashing needs COM port to be located but My PC is not showing COM port of my device..
Pls help Sir Pls help
Thank You
Silly question, but have you installed the correct drivers for your phone on your computer?
AlanVG said:
Silly question, but have you installed the correct drivers for your phone on your computer?
Click to expand...
Click to collapse
Yes Sir,
I have installed the correct drivers of my device and even tried on another computer also.. but still it is not showing the COM ports.
Pls help Pls help Sir
Thank you
Micheal Dan said:
phone can be opened means ok!
i suggest you these two:
1. download an original rom.
2. change to other computer and flash again carefully.
calm down and more careful!
Click to expand...
Click to collapse
Sir I have downloaded its original rom and original flashing tool......
What I have to do next.....
Because flashing needs COM port to be located but My PC is not showing COM port of my device..
Pls help Sir Pls help
Thank You
If com isn't showing then there is only one thing you can do go to customer care......
Gam3boy said:
If com isn't showing then there is only one thing you can do go to customer care......
Click to expand...
Click to collapse
+1
Sent from my HTC One X using xda premium
Micheal Dan said:
phone can be opened means ok!
i suggest you these two:
1. download an original rom.
2. change to other computer and flash again carefully.
calm down and more careful!
Click to expand...
Click to collapse
ya... calm down should b "STRESSED" upon

[Q] Custom CWM and root for ZTE V967S

Hi. I´m new in this forum...and need help.
Somebody can tell me if there are some custom CWM to this phone? and how to root it?
I have searched in the forum but i didn´t find anything. Bruno talk about make a custom CWM for it in his V987 thread but there is no.
Thx.
gargamelxda said:
Hi. I´m new in this forum...and need help.
Somebody can tell me if there are some custom CWM to this phone? and how to root it?
I have searched in the forum but i didn´t find anything. Bruno talk about make a custom CWM for it in his V987 thread but there is no.
Thx.
Click to expand...
Click to collapse
Check here.
http://forum.xda-developers.com/showthread.php?t=2300622
suoko said:
Check here.
http://forum.xda-developers.com/showthread.php?t=2300622
Click to expand...
Click to collapse
Ok suoko Thx.
I will subscribe to your threat waiting for some english CWM, while i will try with the chinesse one. Thanks.
suoko said:
Check here.
http://forum.xda-developers.com/showthread.php?t=2300622
Click to expand...
Click to collapse
Sorry suoko for quote you other time. I´m new in this forum and cant post in your V967S thread. To install the new firmware that solve the touchscreen problem, what is the method? Must I install new CWM or can I install it with the stock CWM simply with "install zip from sdcard"? Stock CWM support backup?
Thx for your support.
Search youtube and you will surely get some videos with step by step information about installing custom rom.
Sent from my LG-E400 using xda premium
Thx for your answer. But this ROM isn´t a custom ROM. It´s a official ROM and i dont know if stock CWM is totally functional to install it.
gargamelxda said:
Thx for your answer. But this ROM isn´t a custom ROM. It´s a official ROM and i dont know if stock CWM is totally functional to install it.
Click to expand...
Click to collapse
I used the default recovery to install the new ZTE build. By "default recovery" I mean the recovery that etotalk put on it. I have no idea if it's the original one or a modded one. Since the phone is chinese the original recovery could have been in chinese language like the cwm one.
I'll try using the http://builder.clockworkmod.com now.
It might accept the chinese cwm one and spit out an english one
The recovery from etotalk can be installed via "etotalk tools".
If you need both of them just ask.
http://www.youtube.com/watch?v=T2cf3mAPOD0
U need UncleTools then update recovery with .img file (it other threqd someone posted it)
This way u got chineese CWM but is easy to find update rom from SD
If u need LeWA rom 4.2.1 tell me
U can see this rom on this video and other my videos show camera sample videos
http://www.youtube.com/watch?v=T2cf3mAPOD0
Regards
BoNt3k and suoko, thx for your answer and help. In a few days I will have the V967S and i want to be ready for root, custom CWM... Now i think that i will can do it.
Thx very much!!
Hey suoko, here is a new ROM to our phone. Have you try it? http://www.needrom.com/mobile/zte-v967s-2/
Hi suoko,
Can you send or post the CWM english recovery.img file ( For mobileUncle tools )
Thanks a lot.
Regards
Geheimke
geheimke said:
Hi suoko,
Can you send or post the CWM english recovery.img file ( For mobileUncle tools )
Thanks a lot.
Regards
Geheimke
Click to expand...
Click to collapse
I think that you may post here http://forum.xda-developers.com/showthread.php?t=2300622&page=2 that is the thread of suoko. Here is possible that he does not read this
gargamelxda said:
Hey suoko, here is a new ROM to our phone. Have you try it? http://www.needrom.com/mobile/zte-v967s-2/
Click to expand...
Click to collapse
No, I'm not going to test experimental roms with this phone cause I'm not going to risk hw failures this time.
The only thing I'd do is remap partitions to have one single internal one but I can happily live with current partitioning.
I'll wait for an official update from zte this time, they look pretty active, like zopmobile devs.
Regarding the english cwm, no, I don't have one.
Sent from my ZTE V967S using Tapatalk 4 Beta
Google Apps
How to install Google Apps without change original room? It's really necessary install CWM?
CWM recovery for V967S v 6.x
Dear Owners, here is a CWM recovery for the ZTE V967S
This contains the correct model name "P188F07".
MD5 sum: fc14578682f3ece49c2211f09d83a090
English
cappa72 said:
Dear Owners, here is a CWM recovery for the ZTE V967S
This contains the correct model name "P188F07".
MD5 sum: fc14578682f3ece49c2211f09d83a090
Click to expand...
Click to collapse
It's in English?
flahvioo said:
It's in English?
Click to expand...
Click to collapse
Yes, it is.
cappa72 said:
Yes, it is.
Click to expand...
Click to collapse
What is the best store to buy the device? And what online store you bought?
I bought mine from etotalk, there are no earphones included but the service is ok
ZTE V967s_need for boot.img
Hello,
I made a mistake using SP flash tool and changed boot.img ... now I can boot only into recovery ... any update I tried from recovery CWM6.0.1.2 seems to install but ends in a boot logo screen and so remains for long long time
I think I need the original boot.img ... can anyone help me?
Regards,
Adrian

[HELP PLZ !] Need samsung galaxy s4 clone gti9500 mt6575 stock rom !

Hi ,
I need samsung galaxy s4 clone gti9500 mtk6575 stock rom to flash it , because my phone is dead after flashing a wrong preloader :crying:
& I don't have a back up :crying::crying:
Please Help Me !!!
& Thank's in advance
I have the same unit, I have the stock rom but its flashable. do u have cwm?
Sent from my Samsung Galaxy Note III using Xparent Blue Tapatalk 2
Uppp upppp uppp
Demi29 said:
I have the same unit, I have the stock rom but its flashable. do u have cwm?
Sent from my Samsung Galaxy Note III using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
No , phone is dead , not booting , not charging .
I heared that if I can enter META MODE I'll be able to flash the stock ROM using SP FLash tool
as in this topic : http://forum.xda-developers.com/showthread.php?t=1943442
Now I found 2 stock ROMS , but I'm not able to enter to META MODE ;(
Give to me the link of stock ROMS PLZ
Sent from my GT-I9500 using xda premium
Jonathan.97 said:
Give to me the link of stock ROMS PLZ
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Can you share me the link for ROM's
i have same problem with my S4 clone. since two day ago i was search how to solve from some anywhere.
until find this stok rom mtk 6575 .can download from (sorry ican insert llink, newbie. ) maybe with PM.
then flash with SPflashtool , as i use SP_Flash_Tool_v3.1328.0.183 -->
and don't forget to install MT6575/6577 USB VCOM drivers
when flashing with spf. when inserting a USB from your PC to your phone while holding vol +.
after flash succed. phone unbricked . i was happy
but there's any problem. SIM CARD not detected. no baseband. imei not valid. but camera phone normally.
then i try factory MODE by press power holding vol up
then choose clear eMMC.
reboot phone.
worked by me
invalid imei - use mobile uncle tool
worked. by me
n sorry bad english.
Hope it help you all guys.... please thanks.
xdain said:
i have same problem with my S4 clone. since two day ago i was search how to solve from some anywhere.
until find this stok rom mtk 6575 .can download from (sorry ican insert llink, newbie. ) maybe with PM.
then flash with SPflashtool , as i use SP_Flash_Tool_v3.1328.0.183 -->
and don't forget to install MT6575/6577 USB VCOM drivers
when flashing with spf. when inserting a USB from your PC to your phone while holding vol +.
after flash succed. phone unbricked . i was happy
but there's any problem. SIM CARD not detected. no baseband. imei not valid. but camera phone normally.
then i try factory MODE by press power holding vol up
then choose clear eMMC.
reboot phone.
worked by me
invalid imei - use mobile uncle tool
worked. by me
n sorry bad english.
Hope it help you all guys.... please thanks.
Click to expand...
Click to collapse
Hi.. does air gesture work...
Remove http and share the link..or pm me please
naresh.garapati said:
Hi.. does air gesture work...
Remove http and share the link..or pm me please
Click to expand...
Click to collapse
air gesture not in tis ROM . download d**s.google.com/file/d/0B6uumU74LB_xb0ZNaGRBUWRILWc/edit?usp=sharing replace * with oc
for air gesture you can download from 4shared.com/zip/f8kv45kK/6575_47_air_gestureGT-I9500_13.html but remember Its for mtk 6577.
Hope help for you all
HIT thanks.
need rom plz
Demi29 said:
I have the same unit, I have the stock rom but its flashable. do u have cwm?
Sent from my Samsung Galaxy Note III using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
i have cwm please send me rom or its link
thanks in advance
Galaxy S4 MT6575
xdain said:
i have same problem with my S4 clone. since two day ago i was search how to solve from some anywhere.
until find this stok rom mtk 6575 .can download from (sorry ican insert llink, newbie. ) maybe with PM.
then flash with SPflashtool , as i use SP_Flash_Tool_v3.1328.0.183 -->
and don't forget to install MT6575/6577 USB VCOM drivers
when flashing with spf. when inserting a USB from your PC to your phone while holding vol +.
after flash succed. phone unbricked . i was happy
but there's any problem. SIM CARD not detected. no baseband. imei not valid. but camera phone normally.
then i try factory MODE by press power holding vol up
then choose clear eMMC.
reboot phone.
worked by me
invalid imei - use mobile uncle tool
worked. by me
n sorry bad english.
Hope it help you all guys.... please thanks.
Click to expand...
Click to collapse
Hello can you PM Me the link of the ROM For S4 MT6575? Thanks
ROM
hello can you pm me the link for stock ROM Also? I need it for my dads phone thanks
xdain said:
i have same problem with my S4 clone. since two day ago i was search how to solve from some anywhere.
until find this stok rom mtk 6575 .can download from (sorry ican insert llink, newbie. ) maybe with PM.
then flash with SPflashtool , as i use SP_Flash_Tool_v3.1328.0.183 -->
and don't forget to install MT6575/6577 USB VCOM drivers
when flashing with spf. when inserting a USB from your PC to your phone while holding vol +.
after flash succed. phone unbricked . i was happy
but there's any problem. SIM CARD not detected. no baseband. imei not valid. but camera phone normally.
then i try factory MODE by press power holding vol up
then choose clear eMMC.
reboot phone.
worked by me
invalid imei - use mobile uncle tool
worked. by me
n sorry bad english.
Hope it help you all guys.... please thanks.
Click to expand...
Click to collapse
Hello,
i have same problem , can you send me link of rom which you use for your mobile ?
thanks for your help in advance.
[email protected]
javedsipra said:
Hello,
i have same problem , can you send me link of rom which you use for your mobile ?
thanks for your help in advance.
[email protected]
Click to expand...
Click to collapse
this link: sory i can insert link.
NOTE: this fro MTK 6575_S01
Demi29 said:
I have the same unit, I have the stock rom but its flashable. do u have cwm?
Sent from my Samsung Galaxy Note III using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
please sir , send me flashable rom to me . i have same unit and i have cwm. i have imei problem.
please help me and send me link please ................................................
thanks in advance.
[email protected]
---------- Post added at 06:09 PM ---------- Previous post was at 06:01 PM ----------
Demi29 said:
I have the same unit, I have the stock rom but its flashable. do u have cwm?
Sent from my Samsung Galaxy Note III using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
Demi29, please send me link of flashable rom , i have cwm but i have imei problem so i want to install stock rom. i have lost my stock rom and i have not backup. please help me . i say you thanks in advance for this kindness.
[email protected]
skype: javed.sipra
Demi29, please send me link of flashable rom , i have cwm but i have imei problem so i want to install stock rom. i have lost my stock rom and i have not backup. please help me . i say you thanks in advance for this kindness.
[email protected]
skype: javed.sipra
Click to expand...
Click to collapse
in case imei problem may can use Mobile Unlce tool
n how used it? just searc google . there are some article how repair IMEI with Mobile Uncle Tool
sory my bad english
hope help all guys
please hit thank
MT6575_S01 s4 clone Rom link
Friends,
Here is the link for the ROM of s4 Clone with air gestures and smart stay
https://drive.google.com/file/d/0B71TBuFNpJLJMTEwWWVtOGJRMms/edit?usp=sharing
Hi,
Thx for this
I ask your permission on google to have this file (mike) Hope it works
mc4one said:
Hi,
Thx for this
I ask your permission on google to have this file (mike) Hope it works
Click to expand...
Click to collapse
let me know if it works
Need samsung galaxy s4 clone gti9500 mt6575 stock rom !
Hi friend, you can think about use some date recovery. From the internet, you can find some free date recovery tool help you.Honey, it can really recovery your all the files.MoonarStore Good luck!

[Completed] PLZ PLZ pLZ help only u can save me..

hello friends i really need ur help plz .....i had recently install custom rom on my phone samsung galaxy s duos gt7562 byhttp://forum.xda-developers.com/android/development/lolipop-extreme-rom-samsung-s-duos-2-gt-t3030181 even before knowing . i had not seen model name correctly i installed it through cwm now phone is not even starting iknow i had no option but if u had then plz assist me my wattsapp 9795158553.... plz yr help kro my dad will kill me
pkprashant said:
hello friends i really need ur help plz .....i had recently install custom rom on my phone samsung galaxy s duos gt7562 byhttp://forum.xda-developers.com/android/development/lolipop-extreme-rom-samsung-s-duos-2-gt-t3030181 even before knowing . i had not seen model name correctly i installed it through cwm now phone is not even starting iknow i had no option but if u had then plz assist me my wattsapp 9795158553.... plz yr help kro my dad will kill me
Click to expand...
Click to collapse
Hi
Thank you for using XDA assist.
Did you take a nandroid back up before flashing? If yes then restore it.
If not , try to flash the stock image .
You can ask here http://forum.xda-developers.com/showthread.php?t=2506692 .
Good luck.
Vivek_Neel said:
Hi
Thank you for using XDA assist.
Did you take a nandroid back up before flashing? If yes then restore it.
If not , try to flash the stock image .
You can ask here http://forum.xda-developers.com/showthread.php?t=2506692 .
Good luck.
Click to expand...
Click to collapse
brother i think u did not got my problem my phone 'samsung galaxy gt7562' is not showing anything it seems to be a case of hard brick no logo no recovery or download odin mode it is reallt irritating
pkprashant said:
brother i think u did not got my problem my phone 'samsung galaxy gt7562' is not showing anything it seems to be a case of hard brick no logo no recovery or download odin mode it is reallt irritating
Click to expand...
Click to collapse
You can try to ask in the forum I linked you.
Thnx brother
Thread closed, thank you

Need TWRP 2.6.3.0 img file [canvas 2 A110]

Please help me guys , I need TWRP 2.6.3.0 for canvas 2 A110 , Someone please provide me the link or share the recovery file if you have now . Thanks in advance , I need it to restore my old backup but I can't find the recovery image now please help
Please some one share the recovery img , I really need that ASAP .
mdezazrock said:
Please some one share the recovery img , I really need that ASAP .
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=46137237&postcount=16
Thank you so much Anik1. Im really thankfull to you buddy , you made my day

Categories

Resources