Database Info

[Q] Enrcyption Support for ClockWorkMod Recovery

Hello,
i have just installed the official stock ICS 4.0.3 Rom to my Nexus S and everything was really fine... until i tried to root it. As someone who tries to take security seriously, i immediately encrypted the device using the tools provided by ics (works ok).
but unfortunatly it's now not possible anymore to mount /sdcard while in recovery, which makes rooting and installing updates impossible (or is there any other way? eg. fastboot?).
therefore my question: will clockworkmod recovery support ics encrypted devices in the (near) future? i know its gonna be a p.i.a. to type a password with only the volume buttons, but hey
i like the encryption and would like to keep it, but not beeing able to use recovery like before is a big drawback...
greetings
Georg

Same for me.
Hope to see encryption support in clockworkmod soon.
I bought Rom manager premium even if I never flash from rm just to support the developers... hope they will be able to get it sorted out

Op -- I'm interested in this for when my phone (EVO 3D) finally gets ICS. Will you post an update to this thread if you hear anything?
BTW, with TWRP getting touchscreen support, it can't be too much longer before CWM gets touchscreen since I think the guys in TWRP were going to start contributing to CWM, from what I've heard anyway. So that would solve the password typing problem.

Georg, thanks for asking this question as I've been wondering the same exact thing. Hopefully we'll get a good answer soon.

Alternatives for ClockworkMod Recovery
I encrypted my device (the Exchange account I added required it) n... now I cant do anything in recovery ... it wont mount the drive ... any suggestions for a replacement ...
thanks ...

mrosensweig said:
I encrypted my device (the Exchange account I added required it) n... now I cant do anything in recovery ... it wont mount the drive ... any suggestions for a replacement ...
thanks ...
Click to expand...
Click to collapse
Its because the way encryption works you have to boot and enter code, that's the whole point, no recovery can do it atm
Sent from my ice cream powered Nexus S

small update:
nothing new on the subject, but i didnt check out the new touch recovery (anyone tried it yet?).
in the mean time i went back to an unencrypted CM9...

I didn't read anything about encryption so did not upgraded to the touch recovery yet

you should lock the bootloader if someone is nagging you

jomir said:
small update:
nothing new on the subject, but i didnt check out the new touch recovery (anyone tried it yet?).
in the mean time i went back to an unencrypted CM9...
Click to expand...
Click to collapse
Jomir, what was the procedure you used to get back to CM9? Is it possible to repartition, erasing the encrypted partitions so a new rom can be flashed? How?
Thx,
rmsilva

rmsilva123 said:
Jomir, what was the procedure you used to get back to CM9? Is it possible to repartition, erasing the encrypted partitions so a new rom can be flashed? How?
Thx,
rmsilva
Click to expand...
Click to collapse
Restore a backup or do a clean install(format boot, system, cache and data)
Sent from my ice cream powered Nexus S

DarkhShadow said:
Restore a backup or do a clean install(format boot, system, cache and data)
Sent from my ice cream powered Nexus S
Click to expand...
Click to collapse
Thanks for the reply, DarkhShadow. The problem is that CWM can't wipe or format these partitions, since it can't mount /sdcard (which is encrypted). If I could only access the external sdcard from within CWM, I could just wipe everything and then install a new rom. But since it can't mount /sdcard, I can't access sd-ext. nvflash is not an option, since my TF101 is B90. Is there a way to either restore the stock recovery (overwrite CWM) or boot from the external SD so I can run a script such as "super wipe full" (http://forum.xda-developers.com/showthread.php?t=1245892)? Maybe there's a way to run the wipe script through adb? If I can just format the partitions (which is what the script does), then CWM would be able to mount /sdcard and, consequently, the external SD and I can flash a new rom (such as revolution HD 3.0.1).
Thanks,
rmsilva

Honestly idk then, try a factory reset on phone(ie booted up) and then maybe it will be unencrypted?
Sent from my ice cream powered Nexus S

The funny thing is that stock recovery on an encrypted phone can write to the disk, but only from a warm reboot (perhaps the kernel stays resident?).
When I say write to disk I say apply the leaked OTA update, 4.0.4 for the VZ Gnex. And correct me if I am wrong, it's writing and mounting the disk, no?
Anyhow, this is done from stock recovery which is open source. So you ask yourself, why can't Koush support mounting the disk from a warm recovery state reboot? Maybe he doesn't know this?
DarkhShadow said:
Its because the way encryption works you have to boot and enter code, that's the whole point, no recovery can do it atm
Sent from my ice cream powered Nexus S
Click to expand...
Click to collapse

rmsilva123 said:
Jomir, what was the procedure you used to get back to CM9? Is it possible to repartition, erasing the encrypted partitions so a new rom can be flashed? How?
Thx,
rmsilva
Click to expand...
Click to collapse
i did a factory reset (from the settings menu), installed recovery per adb/fastboot and installed cm9 from sdcard in recovery.

Use tmpfs to install a new ROM in crypted system
Hello Everyone
To flash a new ROM you can do as follows:
boot in Recovery
format cache partition
from your PC use adb to mount /sdcard as tmpfs:
adb shell mount -t tmpfs none /sdcard​
put your ROM on the (fake) sdcard
adb push <your rom> /sdcard​
use the recovery to flesh the ROM as usual
This worked form me.
Sorry to be late...

What about a nandroid backup or restore? How big is /cache?
orcruin said:
Hello Everyone
To flash a new ROM you can do as follows:
boot in Recovery
format cache partition
from your PC use adb to mount /sdcard as tmpfs:
adb shell mount -t tmpfs none /sdcard​
put your ROM on the (fake) sdcard
adb push <your rom> /sdcard​
use the recovery to flesh the ROM as usual
This worked form me.
Sorry to be late...
Click to expand...
Click to collapse

Sorry I didn't try with a nandroid backup but I think it is too big to fit the device memory...
You can backup data inside the sd partiton (phone up and running, just to don't lose data...), boot into recovery, format sdcard partition, mount it, put the backup in the sdcard and after install the nandroid backup...
I think that it could work but I am not sure. If after formatting the sdcard you can mount it, the task is done. You can put the backup on it using adb push and flash using recovery.
If you try please give me some news.
Regards

orcruin said:
Hello Everyone
To flash a new ROM you can do as follows:
boot in Recovery
format cache partition
from your PC use adb to mount /sdcard as tmpfs:
adb shell mount -t tmpfs none /sdcard​
put your ROM on the (fake) sdcard
adb push <your rom> /sdcard​
use the recovery to flesh the ROM as usual
This worked form me.
Sorry to be late...
Click to expand...
Click to collapse
I'm kind of a noob when it comes to adb. What is that process doing exactly? How big is the fake sdcard? I want to make sure I understand all the implications before I dive in. Of course I need HTC to release a ICS ROM first. ;-)

thx1200 said:
I'm kind of a noob when it comes to adb. What is that process doing exactly? How big is the fake sdcard? I want to make sure I understand all the implications before I dive in. Of course I need HTC to release a ICS ROM first. ;-)
Click to expand...
Click to collapse
First it formats the cache partition. Then mount the /sdcard so that you can access it from your pc. After you mount the /sdcard, you can put your rom zip into it. After the zip has been transferred into /sdcard, you can flash the zip as usual.
Since nexus s doesn't have sdcard slot, it mounts the internal storage as '/sdcard' to treat it like a sdcard, thus 'fake' sdcard. The 'fake' sdcard is around 13GB.

[Q] [RESOLVED!] Help! Recovery Can't Mount SD Card

Can't mount SD card in recovery. See http://bit.ly/LgBTUN.
Tried fix permissions, mount sdcard in recovery says Error mounting /sdcard, other stuff too. Still no go.
Found forum posts with same problem in several HTC phones but don't think the fix works for TF101.
I'd like to put the Megatron ROM on my TF101 though I'd be happy just to get ASUS upgrades. They keep failing - I think from my Dvorak keyboard mod (see device config below).
Any ideas?
TF101. Stock, rooted rom with modded key mapping for Dvorak keyboard when docked. Android Version 3.2.1. Kernel 2.6.36.3 [email protected] #1, Build Number HTK75.US_epad.8.6.5.19-20111107.

Can you still boot Android or did you already wipe?
I also see ROM manager, which is usually bad news for the TF...
That's a rather old recovery, if you can get ADB access you can try my PERI tool to reflash a newer recovery that should mount properly, and then flash a ROM with that.
Good luck!

First, thanks for the help.
I tried your tool. Besides having entertaining comments, it just left me frustrated.
You can see some screenshots at https://docs.google.com/open?id=0B46V3MQdpAUOek1GRGlvS0FKTms
I'm wondering if the problem is that I can't mount / as RW. Perhaps I'm just not getting the right args to adb's mount command. I think I should be able to remount / RW as I can run "adb shell" and then "su" to get the "#" prompt.
I do think part of the problem is that /sdcard is not actually my sdcard. It is a symlink to /mnt/sdcard which is where the physical sdcard is mounted.
I tried to modify init.ventana.rc. I think that is the right file - I just found it by poking my head around. This is what I wanted to change:
Code:
on early-init
mount debugfs debugfs /sys/kernel/debug
export EXTERNAL_STORAGE /mnt/sdcard
mkdir /mnt/sdcard 0000 system system
# for backwards compatibility
symlink /mnt/sdcard /sdcard
But I can't mount / RW so I can't change it. I tried this:
Code:
$ adb root
adbd cannot run as root in production builds
$
I'm definitely rooted. I can su to root in ADB. I also have a SuperUser that seems to be working.

Update: I can mount / RW via ES File Explorer. I can then adb shell, su, and then update files in /. I pushed my updated init.ventana.rc but when I rebooted it reverted to the original.
I'm terribly frustrated.
Any ideas? I seem to have a totally useless CWM. I can't even put a file on /sdcard/update.zip because the sdcard isn't booted when I'm in recover.
Once I get / mounted RW, can I just copy a working CWM into some system directory?

I've spent half my day messing around with this thing. I'm very comfortable with the command line and would happily do a manual install if someone could tell me how to do that.
I tried the adb equivalent of:
Code:
run_program("/sbin/busybox", "dd", "if=/tmp/recoveryblob", "of=/dev/block/mmcblk0p4");
using the 5.5 recoveryblob but it didn't seem to do anything. If I just knew the magic commands, I'd be happy to do them.

Hi there.
I just released the beta version of my EasyFlasher tool.
Try using that, it'll flash Rogue Recovery for you which should successfully mount the sdcard.

You may need to use that (It's Nvflash based) It won't work on a Tf101G or Sl101 though. Give it a shot.
PERI didn't work because your ADB drivers don't work.

Thanks for your help. I finally got a working CWM by following this thread. I then flashed the CWMs you pointed to.
Problem solved.
Though I can always f-up my upgrade to CM9 and be back here for help in a few hours.

Too Funny
I just posted my thanks reply and then noticed that you two pointed me to the solution that I found.
I appreciate your help and timeliness (and your nvflash program too).
Neil

Got my TF101 BK70 SBK1 in same situation and this thread helped me a lot.
Just put my tf into apx mode (hold up + power for 7 seconds, screen stays black but device manager can see APX device connected, then use Universal Naked drivers to fix it.
After that, just open EasyFlasher and choose which recovery you want.

I also had the same problem, I didn't see this thread so I used this workaround:
if you have the keyboard dock you can mount an external usb drive as the sdcard (under the mount options) and do all the backups/flashing from there
Sent from my Transformer using xda app-developers app

There are two sd cards, the internal sd card which is the phone's built-in USB storage, and external sd card which is the removable sd card that is physically located at the back of the phone and is sealed by your phone's battery.
so technically speaking you should be choosing the "choose zip from external sd card" based on how you described storing your rom.
I'm not sure as to why your sdcard is unmounted, but you can remount it back using CWM. There should be a "mounts and storage" section in CWM menu, where you can remount the internal USB storage by selecting "mount /sdcard".
If you want to recover the data in your Android phone, just go to http://android-recovery.net/.

Need help with this can't mount /sd card /
Here is what I am getting (pics). This is on the Tf101 with CWM via 1 click root method

[Q] TF101 Installing Custom ROM on Encrypted device

I recently managed to successfully root my TF101.
I installed CWM (Via ROM Manager) and downloaded CM9
I boot into CWM and attempt to do a nandroid...can't find path.
I attempt to just install from SDCard...can't find path
Realization (and research) hits that CWM can't see the external sd, and the system doesn't see it as SDCARD but EXT-.
CWM can't see the internal SDCard because apparently on the Tablet the ICS encryption locks that down (but doesn't on my EVO since the SC Card isn't part of the internal storage)
I attempt to perform a factory data wipe to clear out the encrtyption , but upon reboot CWM loads. I try to perform the boot-launcher data wipe, but then CWM loads.
I try to use CWM to factory reset but since it can see the damned SDCard because of the encryption, no dice.
My machine is not bricked, as I can still boot into the previous install but I can't seem unable to format the thing to install CM9.
What to do, and thanks.

It has been said multiple times before DO NOT USE ROM MANAGER.
Either use Thing O Doom's peri to install a different CWM or Gnufabio's Recovery installer or NVFlash a rom to completely wipe. And don't use encryption there is no point 99% of the time

I didn't check here first, which is obviously what was my first mistake.
Will any of those recoveries be able to access and format the SD Card area?
Also, I use encryption as I do have sensitive things on my machine that I don't want exposed in case the machine is stolen. First time I've ever had it give me a problem, as the phone encrypts differently.

Team roug's recovery has internal and external sd support and i think the encryption is an ics/tegra 2 bug more than anything

Ok, so I managed to get the new recovery on via Thing O Doom's peri. And I was able to install Revolver via the ext card...but upon boot I was prompted for my encryption pin and got the message that android was updating...My Build number is now Revolver but everything is the same as it was. I still can't factory wipe this damned thing.
Upon request to wipe, it boots back to recovery and says formatting data and cache, data wipe failed.
Tis site states http ://0xfeedface.org/blog/lattera/2012-06-04/installing-cm9-encrypted- android-tablet
The dilemma
When you encrypt your Android device, the /data partition is what gets encrypted. The partition in full is encrypted and cannot be mounted within CWM. CWM also cannot perform a wipe, since it cannot mount the /data partition. And CWM cannot mount the external SD card. This is our dilemma. No access to the internal SD. No access to the external SD. No way to perform a wipe and format the internal SD from CWM.
The Solution
What we need to do, then, is use adb while the tablet is in recovery mode to reformat the internal SD card, thereby removing the encryption. On the US Transformer Prime, the internal SD card is at /dev/block/mmcblk0p8. The partition for our spare SD card will be at /dev/block/mmcblk1p1. You will need to replace those device entries for any other device you might attempt this on. After formatting the internal SD card, we will mount it and then mount the external SD card at /data/media:
In CWM, wipe cache
adb shell
mke2fs -t ext4 /dev/block/mmcblk0p8 # Warning: This can take a while. Be patient.
mount /data
mount /dev/block/mmcblk1p1 /data/media
Now go back to CWM on your device, then go ahead and flash your CM9 and gapps zips like normal. You now have CM9 installed! The /data partition is not encrypted. If you do not need to flash any other ROMs (unlikely if you're reading this article), feel free to re-encrypt your device.
Click to expand...
Click to collapse
I don't know the block numbers for the TF01

you need to undo the encryption before you can wipe anything

You can't. Hence my problem. I cannot mount,delete, or format the SDCard. It sounds like the process in the above post is the solution, but I don't know how to find out what block numbers the tf101 uses.

If you don't mine losing your data NVflashing a rom will resolve all the problems

Yep nvflash will do the trick otherwise as the solution you found yourself explains
Use adb in recovery ( in other words hook it up on a pc ) for this you will need android sdk runnin on your pc
More info about adb u can find here
http://forum.xda-developers.com/showthread.php?t=1751439&highlight=adb+help
Good luck

Thanks to all, I have resolved my issue!
I had to download the stock rom, extract the blob, and use Wheelie for PC to NVFlash everthing abck to stock. I was then able to update over OTA, and use the excellent Thing O Doom's peri to re-root and flash the working recovery.
There should be several items in the Root FAQ up top, such as:
If you are encrypted and going to root, factory reset to get rid of the encryption FIRST since the encryption locks down the SDCARD partition (Unlike on the phone)and none of the recoveries can access it to mount. DON"T use ROM manage on the TF101 and always, always check XDA first.
:good:

darthrater said:
Thanks to all, I have resolved my issue!
I had to download the stock rom, extract the blob, and use Wheelie for PC to NVFlash everthing abck to stock. I was then able to update over OTA, and use the excellent Thing O Doom's peri to re-root and flash the working recovery.
There should be several items in the Root FAQ up top, such as:
If you are encrypted and going to root, factory reset to get rid of the encryption FIRST since the encryption locks down the SDCARD partition (Unlike on the phone)and none of the recoveries can access it to mount. DON"T use ROM manage on the TF101 and always, always check XDA first.
:good:
Click to expand...
Click to collapse
That FAQ is sadly pretty outdated, I wish I could liberate the OP
Glad all is working now though.

[Q] Help! TWRP Won't Mount /sdcard for flashing!

I ran a recovery in TWRP to get my phone back to the phones original rom after being on AOKP JB Build 4 on my AT&T One X, but now it stays on the HTC boot screen with the red legal warning on it and TWRP can't mount /sdcard to flash back to another rom. I really hope that this isn't a brick but can someone shine some light on this issue and a possible fix? Help would be greatly appreciated!
Update: Was able to get AOKP flashed back by mounting /data as /sdcard, phone boots into it and I can use it, but the internal storage (/sdcard) is nonexistent and won't mount.

format sdcard in your computers os. make sure not to factory reset or clear storage in bootloader or it will corrupt sdcard.

DvineLord said:
format sdcard in your computers os. make sure not to factory reset or clear storage in bootloader or it will corrupt sdcard.
Click to expand...
Click to collapse
I can't get the phone to mount as a removable drive because of the problem with /sdcard, so I can't format it from my computer.

c_h0use said:
I can't get the phone to mount as a removable drive because of the problem with /sdcard, so I can't format it from my computer.
Click to expand...
Click to collapse
Don't worry about the red text. We all have that. And it is not bricked.
Can you turn the phone on with the stock ROM you flashed? If so, can you mount the SD card while it is on, booted up in phone mode? If, mount it there, then move your new rom to your phone.

Hello,
I have a similar issue, i can get into TWRP recovery, but i am not able to mount sdcard. My mistake was that i did fastboot flash boot boot.img but i neglected to actually flash the room and i didn't put the rom in the sdcard, so now i need to mount the sdcard to load the rom to flash it, but that is where i am stuck, is there a way to copy files into the sdcard via adb or any other way?
Any help will be greatly appreciated it.
Thank you.

XRACER said:
Hello,
I have a similar issue, i can get into TWRP recovery, but i am not able to mount sdcard. My mistake was that i did fastboot flash boot boot.img but i neglected to actually flash the room and i didn't put the rom in the sdcard, so now i need to mount the sdcard to load the rom to flash it, but that is where i am stuck, is there a way to copy files into the sdcard via adb or any other way?
Any help will be greatly appreciated it.
Thank you.
Click to expand...
Click to collapse
I think what you need to do then is flash the ROM from your bootloader. I found this guide with directions explaining how to flash from the bootloader by googling How To Flash Rom from Bootloader in the XDA Wiki. Here are the steps
ROM Flashing
Obtain a ROM of your choice, and note the location on your computer.
reboot your device into fastboot mode via one of the following options.
adb reboot bootloader (requires USB debugging to be turned on).
power off the device then back on with 'vol up' + power button.
Wipe your device.
fastboot -w
Update your ROM.
fastboot update </path/to/your/RomFile.zip>
Your phone will update and automatically reboot into the new ROM.
ROM update without SDcard
If you don't have an sd card, or your slot is broken you can try this trick, but you will need a custom recovery like Clockwork.
Boot up your phone to recovery. And move your rom file to the adb directory, and start a command line ( cmd )
adb shell
mount data
adb push D:\custom_rom.zip /data/
Wait until the push finised, and restart your device to recovery again with "adb reboot-bootloader"
mount data
mount /data /sdcard ( mount the data folder into your sdcard folder, so your recovery will think that you have an sdcard installed )
Locate the ROM .Zip file you wish to flash.
Confirm the flash by following the on-screen instructions (ie: pressing the trackball, pressing the call button, etc.)
If no errors arise during the flashing process then the ROM flash was successful, Reboot the device.
With some root file explorer, remove the rom file if you don't need it anymore, to free up space.
Or use adb to remove the custom recovery
adb shell rm data/custom_rom.zip

thanks for the reply but the procedure is not working,
when in fastboot through cmd i get
fatsboot -w
erasing 'userdata'...
FAILED (remote: not allowed)
finished. total time: 0.003s
I made sure i am in fastboot USB

elphiz
XRACER said:
thanks for the reply but the procedure is not working,
when in fastboot through cmd i get
fatsboot -w
erasing 'userdata'...
FAILED (remote: not allowed)
finished. total time: 0.003s
I made sure i am in fastboot USB
Click to expand...
Click to collapse
Lol this just happen toe last night what u need to do is boot into bootloader then plug it USB cable to ur phone and format your sdcard it make sure u download a Rom to your computer before this it can be any tom you like after you format you can put the Rom on ur sdcard and flash and u will be golden

loading into bootloader doesn't allow the computer to read/access the sdcard keep in mind this is the HOX so the sdcard is the internal memory, i could get into the recovery and then try to mount it that way and format from there but for some reason i can't select the option mount sdcard.

This works:
How to Fix corrupt/unmountable internal storage on the HTC One X/XL
http://forums.team-nocturnal.com/sh...storage-on-the-HTC-One-X-XL?p=13552#post13552

perfect thanks that did the job. now time to install the ROM!!!!
thanks a lot
hmmmm.... one more question would i need to flash the boot image as well before installing the ROM???
EDIT: i went ahead and just flashed the ROM, and everything is working fine.
Thank you to everyone

XRACER said:
perfect thanks that did the job. now time to install the ROM!!!!
thanks a lot
hmmmm.... one more question would i need to flash the boot image as well before installing the ROM???
EDIT: i went ahead and just flashed the ROM, and everything is working fine.
Thank you to everyone
Click to expand...
Click to collapse
If you're not on Hboot 1.14 then you don't have to flashboot flash boot.img. just flash the .zip from your sd card
Sent from my HTC One XL cellular device over clocked to 1.9Ghz

thank you sir!
king200 said:
This works:
How to Fix corrupt/unmountable internal storage on the HTC One X/XL
Click to expand...
Click to collapse
ok this did work and i appreciate the link. ive bookmarked it for future use. what sux is i assumed i bricked and have already had a new phone shipped. oh well guess i got a back up

will this work because my microsims card unable to mount /sdcard which i assume is the internal one will it work even if its blank/empty via computer because i have no working os on my phone i have incredible 4g so i hope you can help me

XRACER said:
loading into bootloader doesn't allow the computer to read/access the sdcard keep in mind this is the HOX so the sdcard is the internal memory, i could get into the recovery and then try to mount it that way and format from there but for some reason i can't select the option mount sdcard.
Click to expand...
Click to collapse
I did it. Apparently you can install a zip ROM from SD card once you repartition it from the recovery. There is an option to partition the SD card in the Recovery.
After that, restart the phone, go into recovery again, connect to the PC using a USB cable, and use the USB mount option if you want to copy the ROM without removing the microSD card from the phone. Copy the zip ROM to the sdcard and try installing the ROM again. It worked for me !
I was installing the Pico ROM from this tutorial:
www (dot) rootlord.com/2013/08/revert-htc-explorer-back-to-stock-rom (dot) html
I

TWRP Mounting SD card
DvineLord said:
format sdcard in your computers os. make sure not to factory reset or clear storage in bootloader or it will corrupt sdcard.
Click to expand...
Click to collapse
So I think I may have currupted my sdcard. I'm running CM-12 4/21/15 nightly. I'm a nubie at this stuff and have read everywhere I can think of on the forums. When I try to reboot to bootloader from TWRP recovery if goes immediately to the do no remove USB connection FIRMWARE Update. I am worried that this will un-root me with AT&T being jerks and fixing the bumped bootloader. So, I have always just pulled the battery, plus it never has any progress on the %downloaded bar.
To try to fix the issue I may have just made it worse and created too many partitions or corrupted the SD by doing exactly what you said not to do above. Before I did a TWRP wipe (not the advanced version) the SD card was mounted, but some apps like google play music kept saying external storage removed. I did the wipe and saw the factory reset screen and said ok. I had to download all my apps again and then switched to Google Now launcher I orginally rooted and bootloader unlocked with bump on a different smaller external SD card. I wasn't sure if that had anything to do with it.
I'm almost unsure what to ask you or other more experienced users what to do.

eee. how about on my samsung galaxy j5 sm j500h? i wanted to mount my phone to pc but i cant. was planning to fix my phone cause im stucked on bootlogo due to flashing xposed-v72-sdk22-arm.zip. Hoping that you guys can help me out.

[SOLVED] Decryption Unsuccessful and a currently bricked M8

I previously ran LolliGPE but was long overdue for an update. I downloaded the latest version and copied the image to my phone and flashed the ROM. I decided to go try a dirty install first to see if I could keep everything I had, since I had already been running a previous version and after reviewing the changelog did not see anything recommending to wipe clean. After installing successfully, Android asked me to enter my password to decrypt my data (I don't recall ever encrypting my data?), and so I did. It then told me that my password was right, but the data was corrupt, and presented me a button to reset my phone. The button redirected me to recovery and automatically attempted to wipe /data and then re-mount it, but the wipe failed. I rebooted again with the same issue, same failed attempt to wipe. I went to install the zip again, and this time do a full wipe, but it was unable to mount my phone's storage nor my SD card. I am not able to mount either at all now.
What's the best course of action? I'd like to retain as much as I can and avoid wiping all of the internal storage clean. Is there a simpler fix to this or am I doomed?
HBOOT: 3.19.0.0000
RADIO: 1.09.20.0926
OS: 3.28.605.4
EDIT: For anyone else having a problem like this that at least wants to get their data back, here's what you should do (I assume you know how to work with Linux!):
Make sure you have the latest version of TWRP and ADB.
Boot the phone into recovery mode and connect the phone to your computer via USB
Run "ls -al /dev/block/platform/msm_sdcc.1/by-name" and check the output. Make a note of the partition marked "userdata" - for me, it was /dev/block/mmcblk0p48.
Either: simply use adb pull to copy this file to your computer (this will require about 26 gigs of space), or attempt to mount the file. To use adb pull, execute "adb pull /dev/block/<ID> ./data" (ID being what you marked down). Your data partition will be copied to /data. To mount, use "mount -t ext4 /dev/block/<ID> /userdata". Whatever's left of your data will be on your phone's new /userdata folder.
Use ADB to pull what files you want from /userdata. If you pulled the partition, skip this step.
If you copied the files you wanted over, you're done. If you pulled the entire partition, you're going to want to try and mount it. On Windows, there are various tools to mount Linux partitions, a quick Google will find some good ones. However, if the data is corrupt, it will not work. I recommend attempting to repair the partition on linux, with the command "e2fsck -f -y /path/to/data", replacing the path to your data file as necessary. Once done, run "mount -t ext4 /path/to/data /mnt/data", replacing the paths as necessary.
Once mounted, you can access your data wherever it was mounted. If e2fsck appeared to fix many errors, chances are most of your data will be in the lost+found folder, and you'll need to sort through this yourself. If you're lucky, then your data will be intact and readily usable. Internal SD card data is located at ./media/0.
To fix the partitions and get Android back up and running, you need to install the latest firmware, format your data in TWRP, factory reset, and then flash a ROM again. Here's what I did to do that, without an SD card. If you have an SD card, simply copy your ROM zip to the SD card and skip the final steps:
Make sure you have the latest version of TWRP and ADB, and download the latest copy of the firmware (check the development forum here).
Boot the phone (doesn't matter to what) and run adb reboot bootloader. When your phone reboots, double-check by running fastboot reboot-bootloader.
Put your phone in RUU mode with fastboot oem rebootRUU. The phone will restart and the HTC logo will come up.
Wait a couple seconds, then run fastboot flash zip firmware.zip, where firmware.zip is the firmware you want to flash.
The first time you do this, it will fail saying something like "FAILED (remote: 90 hboot pre-update! please flush image again immediately)". Ignore this, run the last command again: fastboot flash zip firmware.zip
The progress bar will appear and begin filling. Wait until fastboot is finished flashig it (the progress bar may not fill completely), wait an extra 5 seconds or so, and then do fastboot reboot.
The phone will reboot. Android will still be messed up, but you can verify the partitions are in working order by checking adb shell cat /proc/emmc.
Once you know the partitions are working, get back into TWRP/recovery: adb reboot recovery
Format /data and wipe /cache, /data, dalvik/art cache, etc (factory reset). You will lose the contents of your internal storage and everything else.
If you don't have the ROM zip on an sd card, make sure the zip is in the same directory as adb and run adb push rom.zip /sdcard/rom.zip, where rom.zip is the ROM. You can also copy it to the external sd by swapping /sdcard/rom.zip with /external_storage/rom.zip.
Once copied, reboot into recovery and flash the zip. Back to normal!

Update:
It's a firmware problem. Apparently there was a new firmware update that the ROM uses that I don't have. mmcblk0p42 was changed to "vzw_logger" (which I don't have), making mmcblk0p49 userdata instead of previously mmcblk0p48. The data partition it expects to be /data is /cache. Got this information by comparing 'cat /proc/emmc' with information of the latest version I found here.
Is there a way to fix this that allows me to preserve the contents of my internal storage (/sdcard)? Can I just flash an older version of the ROM to backup my data?

Klayderpus said:
Update:
It's a firmware problem. Apparently there was a new firmware update that the ROM uses that I don't have. mmcblk0p42 was changed to "vzw_logger" (which I don't have), making mmcblk0p49 userdata instead of previously mmcblk0p48. The data partition it expects to be /data is /cache. Got this information by comparing 'cat /proc/emmc' with information of the latest version I found here.
Is there a way to fix this that allows me to preserve the contents of my internal storage (/sdcard)? Can I just flash an older version of the ROM to backup my data?
Click to expand...
Click to collapse
I posted a warning about this change in the general section early on. For you to have the partition changes means you are on the newer firmware which doesn't match what you posted above for os. You very likely at this point have nothing left to salvage. Are you on the latest twrp?

dottat said:
I posted a warning about this change in the general section early on. For you to have the partition changes means you are on the newer firmware which doesn't match what you posted above for os. You very likely at this point have nothing left to salvage. Are you on the latest twrp?
Click to expand...
Click to collapse
I am on the latest TWRP, yes. Since this post, I've actually been making good progress in getting the data partition back, or so I think. I've been using dd to copy /dev/block/mntblk0p48 to an image file, but got stuck when I reached the FAT32 limit, so I re-formatted my SD card, except now it's read-only.

Klayderpus said:
I am on the latest TWRP, yes. Since this post, I've actually been making good progress in getting the data partition back, or so I think. I've been using dd to copy /dev/block/mntblk0p48 to an image file, but got stuck when I reached the FAT32 limit, so I re-formatted my SD card, except now it's read-only.
Click to expand...
Click to collapse
If you Dd the entire data partition it's gonna be almost 25 gigs. If you can't mount data in twrp and find anything usable when browsing via adb in twrp there's probably not anything usable in there.

dottat said:
If you Dd the entire data partition it's gonna be almost 25 gigs. If you can't mount data in twrp and find anything usable when browsing via adb in twrp there's probably not anything usable in there.
Click to expand...
Click to collapse
I did a DD before while in ADB and it only got to about 1.3 gigs, but after running the image through e2fsck I actually found some images and downloads. I think there's usable stuff in there and I'd like to at least try to get it. There's family pictures and stuff on there that have some value to me. My SD card is 32 gigs so I could probably do it if anything for the hell of it.
Do you happen to know how I can get the SD card mounted? mount -o rw,remount /dev/block/mmcblk1p1 [some dir] is what I've been trying, but I've been getting either Read only filesystem or Invalid argument.
I might be a little crazy

Klayderpus said:
I did a DD before while in ADB and it only got to about 1.3 gigs, but after running the image through e2fsck I actually found some images and downloads. I think there's usable stuff in there and I'd like to at least try to get it. There's family pictures and stuff on there that have some value to me. My SD card is 32 gigs so I could probably do it if anything for the hell of it.
Do you happen to know how I can get the SD card mounted? mount -o rw,remount /dev/block/mmcblk1p1 [some dir] is what I've been trying, but I've been getting either Read only filesystem or Invalid argument.
I might be a little crazy
Click to expand...
Click to collapse
Its already mounted.. Just boot into TWRP while connected to your PC. Open cmd prompt in your adb directory.
adb shell
cd sdcard
ls
See if your internal SD card contents are listed.

dottat said:
Its already mounted.. Just boot into TWRP while connected to your PC. Open cmd prompt in your adb directory.
adb shell
cd sdcard
ls
See if your internal SD card contents are listed.
Click to expand...
Click to collapse
TWRP lists the internal SD card as being size 0 under Mount -> Select Storage and /sdcard is empty. I re-formatted my external SD card to make a full size image but that's what wasn't mounting.

Klayderpus said:
TWRP lists the internal SD card as being size 0 under Mount -> Select Storage and /sdcard is empty. I re-formatted my external SD card to make a full size image but that's what wasn't mounting.
Click to expand...
Click to collapse
Did you try the repair option for /data listed under wipe in TWRP?

dottat said:
Did you try the repair option for /data listed under wipe in TWRP?
Click to expand...
Click to collapse
Doesn't work. There's a couple of messages about not being able to mount /data and then:
Code:
Repairing Data using e2fsck...
E:Unable to repair '/data'.
E:Error repairing file system.

Klayderpus said:
Doesn't work. There's a couple of messages about not being able to mount /data and then:
Code:
Repairing Data using e2fsck...
E:Unable to repair '/data'.
E:Error repairing file system.
Click to expand...
Click to collapse
try this
adb shell
mount -t ext4 /dev/block/mmcblk0p49 /userdata
df
show me the output of df...
and if to be sure of which firmware you are on.. reboot recovery... and do the following....
adb shell
mount -t ext4 /dev/block/mmcblk0p48 /userdata
df
and show me that DF

I got all of my data back successfully. I'm updating the OP with the steps I did to get it back.
What's the next step? Change firmware? I have a local copy of what I needed from the phone, so anything's game now.
edit: /dev/block/mmcblk0p48 for me is userdata, 49 does not exist. Both mounts fail.
Code:
df
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 933044 24 933020 0% /dev
tmpfs 933044 20 933024 0% /tmp
/dev/block/mmcblk0p47 1030828 16464 1014364 2% /cache
/dev/block/mmcblk1p1 30647232 12 29090436 0% /external_sd
/dev/block/mmcblk1p1 30647232 12 29090436 0% /and-sec

Klayderpus said:
I got all of my data back successfully. I'm updating the OP with the steps I did to get it back.
What's the next step? Change firmware? I have a local copy of what I needed from the phone, so anything's game now.
edit: /dev/block/mmcblk0p48 for me is userdata, 49 does not exist. Both mounts fail.
Code:
df
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 933044 24 933020 0% /dev
tmpfs 933044 20 933024 0% /tmp
/dev/block/mmcblk0p47 1030828 16464 1014364 2% /cache
/dev/block/mmcblk1p1 30647232 12 29090436 0% /external_sd
/dev/block/mmcblk1p1 30647232 12 29090436 0% /and-sec
Click to expand...
Click to collapse
I would say update firmware. Since you confirmed blk48 as user data I know you don't have lollipop firmware.
I posted a firmware zip that contains the newest twrp which is compatible with lollipop in tigerstowns firmware thread. You can use that to update.
Then wipe and reinstall whatever Rom you want to use.

I fixed it this morning by updating firmware and will update the OP with the rest of the steps for the Googlers. Thanks again.

Klayderpus said:
EDIT: For anyone else having a problem like this that at least wants to get their data back, here's what you should do (I assume you know how to work with Linux!):
Make sure you have the latest version of TWRP and ADB.
Boot the phone into recovery mode and connect the phone to your computer via USB
Run "ls -al /dev/block/platform/msm_sdcc.1/by-name" and check the output. Make a note of the partition marked "userdata" - for me, it was /dev/block/mmcblk0p48.
Either: simply use adb pull to copy this file to your computer (this will require about 26 gigs of space), or attempt to mount the file. To use adb pull, execute "adb pull /dev/block/<ID> ./data" (ID being what you marked down). Your data partition will be copied to /data. To mount, use "mount -t ext4 /dev/block/<ID> /userdata". Whatever's left of your data will be on your phone's new /userdata folder.
Use ADB to pull what files you want from /userdata. If you pulled the partition, skip this step.
If you copied the files you wanted over, you're done. If you pulled the entire partition, you're going to want to try and mount it. On Windows, there are various tools to mount Linux partitions, a quick Google will find some good ones. However, if the data is corrupt, it will not work. I recommend attempting to repair the partition on linux, with the command "e2fsck -f -y /path/to/data", replacing the path to your data file as necessary. Once done, run "mount -t ext4 /path/to/data /mnt/data", replacing the paths as necessary.
Once mounted, you can access your data wherever it was mounted. If e2fsck appeared to fix many errors, chances are most of your data will be in the lost+found folder, and you'll need to sort through this yourself. If you're lucky, then your data will be intact and readily usable. Internal SD card data is located at ./media/0.
[/LIST]
Click to expand...
Click to collapse
I have a laptop running Ubuntu: where do I run the "ls -al /dev/block..." command? As in what folder do I need to be in? The phone only appears in an mtp capacity...
EDIT: I figured that out but now I am stuck at "adb pull /dev/block/<ID> ./data". My ID was mmcblk0p28 but the command returns "Bash: mmcblk0p28: no such file or directory exists"
EDIT 2: Got that command to work but the file is too large to write (My disk is FAT32 ). So I then tried the mount command but again got "no such file or directory exists".

Same Issue "Decryption Unsuccessful"
I was trying to apply the OTA update for 5.1 on my M8 converted to GPE 5.01, but had to update to the stock recovery, and found myself in the same situation with the "Decryption Unsuccessful" message.
Following Klayderpus' steps to recover, but I'm running into a few issues:
1) Windows not Ubuntu so some (many) of the commands do not apply.
2) The device is not responding to adb, although it was prior to the "upgrade". Fastboot is working.
3) TWRP was not on the device, in fact I never could get to the recovery after trying to install the stock recovery when I converted to GPE 5.01 many months ago
I have a fresh nandroid backup, so I am just trying to get the device running. Being without the phone is causing me great pain....
I upgraded the firmware to 4.16 and did the factory reset from the stock 4.16 recovery. The phone boots back to the "Decryption Unsuccessful" message.
I am not sure, but I think the next step for me to try is to install the GPE ROM from graffixnyc from the microSD card (need to find/buy that little SD adaptor)
Any help would be greatly appreciated!!
========================
Update;
Recovery does not see the SD card , so I won't be able to install from there.
I'll try flashing TWRP recover to see if that will show the contents of the external card
========================
Update 2:
TWRP does see the external card, but the install failed as it is unable to mount /data and /storage.
I'm out of ideas....HELP!!
========================
Update 3
I noticed the "factory reset" in HBOOT and thought I'd try that instead of the "Wipe" in TWRP, but only made things worse.
Now the phone comes up to the "Decryption Unsuccessful" where I can then take the reset to get it into TWRP recover
TWRP comes up directly into a screen where it's "Running OpenRecovery Script" and then reboots.
I'm going to quit now, as I am only making matters worse.....
========================
Update 4
I got TWRP to quit whatever it was doing.
Now, In TWRP > Wipe > Advanced Wipe, I cannot wipe or repair the Data partition. I see a message "Could not mount /data unable to find crypto footer". Trying to wipe the Davlik Cache fails, "Unable to mount /data, " Unable to mount storage".
========================
version-bootloader: 3.19.0.0000
version-baseband: 1.25.214500021.06G
version-main: 4.16.401.10
modelid: 0P6B12000
cidnum: 11111111
========================
I've bricked the phone and it looks permanent.
I found another thread where everyone was solving this issue running this command "mke2fs -T ext4 /dev/block/mmcblk0p8" in TWRP. I failed to notice that it was not an M8 device thread. The phone won't boot at all, and windows sees it as a usb drive.
Haste makes waste

Do you still have fastboot?
Check out the RUU collection here and grab what apllies to your device:
http://forum.xda-developers.com/ver...zw-m8-master-ruu-firmware-collection-t2946473
Make sure you use the HTC fastboot.exe from post 3

highplains914drifter said:
I was trying to apply the OTA update for 5.1 on my M8 converted to GPE 5.01, but had to update to the stock recovery, and found myself in the same situation with the "Decryption Unsuccessful" message.
Following Klayderpus' steps to recover, but I'm running into a few issues:
1) Windows not Ubuntu so some (many) of the commands do not apply.
2) The device is not responding to adb, although it was prior to the "upgrade". Fastboot is working.
3) TWRP was not on the device, in fact I never could get to the recovery after trying to install the stock recovery when I converted to GPE 5.01 many months ago
I have a fresh nandroid backup, so I am just trying to get the device running. Being without the phone is causing me great pain....
I upgraded the firmware to 4.16 and did the factory reset from the stock 4.16 recovery. The phone boots back to the "Decryption Unsuccessful" message.
I am not sure, but I think the next step for me to try is to install the GPE ROM from graffixnyc from the microSD card (need to find/buy that little SD adaptor)
Any help would be greatly appreciated!!
========================
Update;
Recovery does not see the SD card , so I won't be able to install from there.
I'll try flashing TWRP recover to see if that will show the contents of the external card
========================
Update 2:
TWRP does see the external card, but the install failed as it is unable to mount /data and /storage.
I'm out of ideas....HELP!!
========================
Update 3
I noticed the "factory reset" in HBOOT and thought I'd try that instead of the "Wipe" in TWRP, but only made things worse.
Now the phone comes up to the "Decryption Unsuccessful" where I can then take the reset to get it into TWRP recover
TWRP comes up directly into a screen where it's "Running OpenRecovery Script" and then reboots.
I'm going to quit now, as I am only making matters worse.....
========================
Update 4
I got TWRP to quit whatever it was doing.
Now, In TWRP > Wipe > Advanced Wipe, I cannot wipe or repair the Data partition. I see a message "Could not mount /data unable to find crypto footer". Trying to wipe the Davlik Cache fails, "Unable to mount /data, " Unable to mount storage".
========================
version-bootloader: 3.19.0.0000
version-baseband: 1.25.214500021.06G
version-main: 4.16.401.10
modelid: 0P6B12000
cidnum: 11111111
========================
I've bricked the phone and it looks permanent.
I found another thread where everyone was solving this issue running this command "mke2fs -T ext4 /dev/block/mmcblk0p8" in TWRP. I failed to notice that it was not an M8 device thread. The phone won't boot at all, and windows sees it as a usb drive.
Haste makes waste
Click to expand...
Click to collapse
If you have fastboot do the following commands
Fastboot oem task 28
Fastboot oem task 29
Then try to flash your rom or ruu.

dottat said:
If you have fastboot do the following commands
Fastboot oem task 28
Fastboot oem task 29
Then try to flash your rom or ruu.
Click to expand...
Click to collapse
No Fastboot, nothing. Device was charged, but now acts as if the battery is dead. the Power button does nothing even after a long press.
Bad day...

Klayderpus said:
I previously ran LolliGPE but was long overdue for an update. I downloaded the latest version and copied the image to my phone and flashed the ROM. I decided to go try a dirty install first to see if I could keep everything I had, since I had already been running a previous version and after reviewing the changelog did not see anything recommending to wipe clean. After installing successfully, Android asked me to enter my password to decrypt my data (I don't recall ever encrypting my data?), and so I did. It then told me that my password was right, but the data was corrupt, and presented me a button to reset my phone. The button redirected me to recovery and automatically attempted to wipe /data and then re-mount it, but the wipe failed. I rebooted again with the same issue, same failed attempt to wipe. I went to install the zip again, and this time do a full wipe, but it was unable to mount my phone's storage nor my SD card. I am not able to mount either at all now.
What's the best course of action? I'd like to retain as much as I can and avoid wiping all of the internal storage clean. Is there a simpler fix to this or am I doomed?
HBOOT: 3.19.0.0000
RADIO: 1.09.20.0926
OS: 3.28.605.4
EDIT: For anyone else having a problem like this that at least wants to get their data back, here's what you should do (I assume you know how to work with Linux!):
Make sure you have the latest version of TWRP and ADB.
Boot the phone into recovery mode and connect the phone to your computer via USB
Run "ls -al /dev/block/platform/msm_sdcc.1/by-name" and check the output. Make a note of the partition marked "userdata" - for me, it was /dev/block/mmcblk0p48.
Either: simply use adb pull to copy this file to your computer (this will require about 26 gigs of space), or attempt to mount the file. To use adb pull, execute "adb pull /dev/block/<ID> ./data" (ID being what you marked down). Your data partition will be copied to /data. To mount, use "mount -t ext4 /dev/block/<ID> /userdata". Whatever's left of your data will be on your phone's new /userdata folder.
Use ADB to pull what files you want from /userdata. If you pulled the partition, skip this step.
If you copied the files you wanted over, you're done. If you pulled the entire partition, you're going to want to try and mount it. On Windows, there are various tools to mount Linux partitions, a quick Google will find some good ones. However, if the data is corrupt, it will not work. I recommend attempting to repair the partition on linux, with the command "e2fsck -f -y /path/to/data", replacing the path to your data file as necessary. Once done, run "mount -t ext4 /path/to/data /mnt/data", replacing the paths as necessary.
Once mounted, you can access your data wherever it was mounted. If e2fsck appeared to fix many errors, chances are most of your data will be in the lost+found folder, and you'll need to sort through this yourself. If you're lucky, then your data will be intact and readily usable. Internal SD card data is located at ./media/0.
To fix the partitions and get Android back up and running, you need to install the latest firmware, format your data in TWRP, factory reset, and then flash a ROM again. Here's what I did to do that, without an SD card. If you have an SD card, simply copy your ROM zip to the SD card and skip the final steps:
Make sure you have the latest version of TWRP and ADB, and download the latest copy of the firmware (check the development forum here).
Boot the phone (doesn't matter to what) and run adb reboot bootloader. When your phone reboots, double-check by running fastboot reboot-bootloader.
Put your phone in RUU mode with fastboot oem rebootRUU. The phone will restart and the HTC logo will come up.
Wait a couple seconds, then run fastboot flash zip firmware.zip, where firmware.zip is the firmware you want to flash.
The first time you do this, it will fail saying something like "FAILED (remote: 90 hboot pre-update! please flush image again immediately)". Ignore this, run the last command again: fastboot flash zip firmware.zip
The progress bar will appear and begin filling. Wait until fastboot is finished flashig it (the progress bar may not fill completely), wait an extra 5 seconds or so, and then do fastboot reboot.
The phone will reboot. Android will still be messed up, but you can verify the partitions are in working order by checking adb shell cat /proc/emmc.
Once you know the partitions are working, get back into TWRP/recovery: adb reboot recovery
Format /data and wipe /cache, /data, dalvik/art cache, etc (factory reset). You will lose the contents of your internal storage and everything else.
If you don't have the ROM zip on an sd card, make sure the zip is in the same directory as adb and run adb push rom.zip /sdcard/rom.zip, where rom.zip is the ROM. You can also copy it to the external sd by swapping /sdcard/rom.zip with /external_storage/rom.zip.
Once copied, reboot into recovery and flash the zip. Back to normal!
Click to expand...
Click to collapse
Hey
I have a HTC one m7 verizon & same problem storage decryption failed. See my case here in below post. And please tell me if anything possible. Please......
http://forum.xda-developers.com/verizon-htc-one/help/storage-encryped-htc-one-m7-vzw-s-t3279869