1. Open Odin.exe (UnZip from Odin.zip)
2. Go into Download mode (Put your device in Download Mode by pressing Volume Down + Home + Power and plug it to your PC)
3. Select OPS - AriesVE.ops (UnZip from AriesVE.zip)
4. Select BOOT - Boot_loader.tar
5. Flash it and bootloop into recovery never gona happen.
All the files is attached...
thanks
Related
Here's the complete steps for rooting Samsung Galaxy ACE II (for newbie) thanks to this site (http://support.evanhe.com/2012/11/13/how-to-root-samsung-galaxy-ace-ii/)
1. Download this (https://www.opendrive.com/files/63284615_5VxZV/RootPack.zip)
2. Connect your phone to the PC with the USB cable and open it up in the file manager. (You can then also backup all your stuff.)
3. Right click RootPack.zip and choose extract here, then copy upd.zip to “Phone” on the file manager. Leave your phone connected to the PC via USB up to step #8
4. In the extracted files of RootPack.zip open Odin3-v1.85 -> Odin3 v1.85.exe
5. Click on PDA and choose I8160XXLD8_ready_to_root_ANT.tar.md5 that you’ll find in the extracted files of RootPack.zip Do not click start.
6. Boot your phone in download mode (hold vol down + home + power) and wait a few seconds so that your PC detected it.
7. Now click start in Odin. If the box on the left upper side isn’t turning green hit start a 2nd time.
8. Once odin has finished, disconnect your phone from the USB and boot your phone into recovery mode (vol up + home + power)
9. Select update from SD Card via the volume keys and select upd.zip and flash it.
This is for newbie like me. Credits to evanhe
Cache
can we install the cwm from cahce
if our device is rooted ?
Note Until i have 10 posts, i can't put External links or pictures .So to see the full article with links and images please visit the source : cloudandro.com/Topics/revu_5_en.html
Prerequisite :
This root is for the 4.2.2 version.
Installation on your responsibility.
These steps will increase the counter.
Use the original cable of the phone.
Your mobile should have 70 – 80% battery.
Download Samsung Keys
Taking a backup copy of the phone.
Unzip attached file using Winrar,WinZIP or 7zip.
Method of installation:
Download recovery file in your computer CWM-touch_i9082_chotu.tar.zip.
After unziping it you will get this file : CWM-touch_i9082_chotu.tar.md5.
Download Odin3 v3.04 unzip,and run it.
Place recovery file in the PDA box .
Now, switch off your phone.
Then boot it into Odin/Download mode by pressing and holding Volume down + Home + Power Key (long Press).
I9082 DownlodingMod
Now connect the phone and start it.
You will see a warning: Press the volume up button.
Note: If failed Delete the MD5 the name will be like this CWM-touch i9082 chotu.tar and then try again.
Now download the root file UPDATE-SuperSU-v1.51.zip and Place it in the external memory(sdcard).
Now switch off ypur phone.
Then boot it into Odin/Download mode by pressing and holding Volume down + Home + Power Key (long Press).
Choose these commands:
install zip from sdcard.
choose zip from sdcard.
Look for the recovery file.
Choos it and do yes.
After installing return to main menu and choose : reboot system now
Now your phone is routed.
Thats all .
I wanna share my knowledge here
Learning from my experience using Samsung's devices, I found similarities in the way of reversing Samsung devices to stock rom.
So this guide should be practice for almost all Samsung devices
Ok, let's get started
First, download all these stuff
1. Samsung USB Driver or go to this Thread (install it)
2. Samsung Kies (install it)
3. Odin v.4xx or Odin v1-3 or go to this Thread (just open when need it)
4. And of course your stock rom
Download from here (choose the right stock rom and the newest depend on your model)
5. Extract the stock rom using winrar/7zip
-you should 3 files PDA_xx.tar.md5, Phone/Modem_xx.tar.md5 and CSC_xx.tar.md5 or more
-If you have just two files, .xxxx.tar.md5 & SS_DL.dll, i'll give it the guide too
Second, Go to download mode
- For device with Menu button : hold power button+menu button+volume down (vol -)
- For device without Menu button : hold power button+volume down (vol -)
For the 3 Files or more
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Choose PDA (browse it from your extracted stock rom)
- Choose phone/modem (browse it from your extracted stock rom)
- CSC (browse it from your extracted stock rom)
- If there's more files, just put it on the same box of the files names
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
For 2 files only
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Just choose PDA and browse it the file(forget about SS_DL.dll or XX.dll file)
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
If there's something miss or wrong, please tell me, I'll fix it this ASAP
And Let's helping people
I wanna share my knowledge here
Learning from my experience using Samsung's devices, I found similarities in the way of reversing Samsung devices to stock rom.
So this guide should be practice for almost all Samsung devices
Ok, let's get started
First, download all these stuff
1. Samsung USB Driver or go to this Thread (install it)
2. Samsung Kies (install it)
3. Odin v.4xx or Odin v1-3 or go to this Thread (just open when need it)
4. And of course your stock rom
Download from here (choose the right stock rom and the newest depend on your model)
5. Extract the stock rom using winrar/7zip
-you should 3 files PDA_xx.tar.md5, Phone/Modem_xx.tar.md5 and CSC_xx.tar.md5 or more
-If you have just two files, .xxxx.tar.md5 & SS_DL.dll, i'll give it the guide too
Second, Go to download mode
- For device with Menu button : hold power button+menu button+volume down (vol -)
- For device without Menu button : hold power button+volume down (vol -)
For the 3 Files or more
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Choose PDA (browse it from your extracted stock rom)
- Choose phone/modem (browse it from your extracted stock rom)
- CSC (browse it from your extracted stock rom)
- If there's more files, just put it on the same box of the files names
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
For 2 files only
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Just choose PDA and browse it the file(forget about SS_DL.dll or XX.dll file)
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
If there's something miss or wrong, please tell me, I'll fix it this ASAP
And Let's helping people
1- download twrp http://techerrata.com/file/twrp2/jfltexx/openrecovery-twrp-2.8.4.0-jfltexx.tar
2- go download mode
3- run Odin load file as AP then click start
4- go to recovery by powering off your device and hold volume up + home + power button
5- download SuperSU https://mega.co.nz/#!HNkSWaTa!vW1QUpiMTqXuwjVEd8RVCsXj1xGp-x6-lxl_XOd-UlI
6- insert the zip from twrp
7. download root browser https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree&hl=en
8. go to system file and roll down to build .prop
9. roll down and insert
Code:
fw.max_users=30
fw.show_multiuserui=1
save it and restart your phone this method work with all samsung device that have lollipop
tell me if you have any problem
i wish it work with all