Related
First off Im new here. Well I haven't posted on xda before, but I've spent enough time reading.... anyway, have an vzsgs3 cwmr bootldr unlocked flashed taste of beans... then wiped flashed slimrom and then nandroid'D stock over that.got the wonderful nonvzw triangle of death.... after that I flashed stock root66 via Odin. Lost my imei in that whole process. Didn't have it backed up either.went through pretty much every post that related to the sgs 3 and imei.Now I have a 4g ONLY device.I also found out that you cannot make or receive calls on 4g and the tower negotiation/propagation takes place over the cdma network. If I restart my phone every time I move to a different tower I can use it on 4g to surf the web. No call or texts ever. If I leave the range of a tower, I get a /0 slash zero for reception. Reboot and 4g is back.This is strictly 4g ONLY.it will not and cannot connect to the mobile network .try to dial out, error: mobile network not available. Factory reset several times. Phone is back to oob stock. I would be tempted to say there is something mucked up in the nv rf items. By flashing and resetting, it would set everything back to stock except the radio FW. Switched Sims with a working one... same. Imei is fixed, about status shows it correct as well as the correct phone number and everything else. Where should I go from here.? Let me know what info u need and ill post it.thx!
mrfishjosh said:
First off Im new here.... !
Click to expand...
Click to collapse
Nobody? I can't use my phone, somebody has to know somthing bout it? I've spent hours googleing and searching the forums... no luck, it would be helpful if somebody could post something that might lead me in the right direction... ANY help is greatly appreciated!
No one is gonna reply because you suck at writing stuff out and cant understand what you are saying.
As for your phone, the imei has been restored but the phone is still borked? Did you odin back to stock after all those issues? That would have reflashed your modem. Did you check the md5 on the crap you flashed too?
Sent from my CleanRom'd Galaxy SIII
http://rootzwiki.com/topic/34053-officialmodems-verizon-sgs3-sch-i535-odin-or-recovery-flashable/
I would odin back to stock if that doesn't work. Try to instal one of these basebands from the link. I'm pretty sure flashing stock with odin does thatthough. I'm a noob but that is my best guess. Good luck.
There is a tool on here that you can fix your IMEI with, if you haven't already. I would try to reprovision the SIM if you have done everything else.
Sent from my SCH-I535 using xda premium
Searched for SIM reprovision. Dialed the *xxxx*xxxx# number and it worked. Thanks! Problem solved
mrfishjosh said:
Searched for SIM reprovision. Dialed the *xxxx*xxxx# number and it worked. Thanks! Problem solved
Click to expand...
Click to collapse
Glad it worked for you! It is nice to see someone actually try to and fix a problem instead of running to Verizon and getting another phone.
Sent from my SCH-I535 using xda premium
Read all of the post and the one bellow it from cschmitt before you do anything. This also might be illegal in the USA if you bought your phone after 1/26/2013
The last few days it's been going around unlocking the note II and gs3 with some settings(http://forum.xda-developers.com/showpost.php?p=34661189). Well the good news is the method can be used on our phones! I don't know what modems work I know two that don't. I was able to use the T989 modem (Tmo_SGH-T989_UVLE1_radio.zip)to unlock my phone but others have reported UCLD2 (a skyrocket modem) works as well. after I unlocked I switched back to UCLI3 and the phone is still unlocked.
You'll need to be on a stock(or stock based) rom and you should make sure the number matches the text next to it. All you need to do is touch the row to select it. I did these steps with a O2 sim card in my phone. after the reboot your phone might take a second but it should connect to the network and be happy with your non att sim.
I have not tested this on a rogers phone. It might work it might make your phone explode in your hand and kill you. For all I know it could do the same for other ATT phones.
f_v_man said:
Go to dailer screen. press *#197328640#.
press [1]DEBUG SCREEN
Press [8]PHONE CONTROL
Press [5] SIMULATION
Press [6] NETWORK LOCK
Press [3] PERSO SHA256 OFF
Wait exactly 30 seconds
press the menu key on the phone and select back option. This will take you back to NETWORK LOCK screen.
Press [4] NW LOCK NV DATA INITIALLIZ
Wait exactly one minute and reboot the phone.
Should be unlocked.
Click to expand...
Click to collapse
Confirmed, this method works to network unlock using stock UCLD2 rom and modems (the April 15th ICS 4.0.3 leak.) Links to the CWM-flashable stock ROM and modems can be found below. Unlock was performed on an AT&T locked SGH-I727 using a TMO SIM card.
This method is modem specific, as the service mode commands vary by modem. It does NOT work with UCLA3, UCLE2, or UCLF6 modems (NV initialize menu item is not present, or non-functional.)
Note: After 'Press [4] NW LOCK NV DATA INITIALLIZ' step the phone reports ' PERSO_NV_INIT is SUCCESSFUL', then it's safe to reboot.
Confirmed that IMEI is intact following network unlock, and that unlock persists following a ROM/modem flash (back to CM-10.0.0 and UCFL6 modems.)
Awesome find, my friend!
Links to CWM flashable zips:
UCLD2 modems: here
UCLD2 OEM Stock, rooted: here
kool, i added this thread to the sticky, even though its cheap to buy an unlock code for rogers(i paid under $8 from ebay), for att users its more expensive
Hi, I'm stock ICS on ATT, if I just flash the new modem will that make any difference on my ATT service? Like not get HSPA+ service. I am currently out of the country so I can't test it with my ATT sim. (had my phone line suspended)
Also using a SIM from the Philippines... Will the type of SIM card make any difference?
Sent from my SAMSUNG-SGH-I727 using xda premium
Let me get this straight. A STOCK rom like embryo? Or back to actual stock... I'm in slim bean 3.1. And then I have to flash a new modem? Current UCLI3. Thanks!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
kchen96 said:
Let me get this straight. A STOCK rom like embryo? Or back to actual stock... I'm in slim bean 3.1. And then I have to flash a new modem? Current UCLI3. Thanks!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
no, flash the files cschmitt posted
UCLD2 modems: here
UCLD2 OEM Stock, rooted: here
Click to expand...
Click to collapse
kchen96 said:
Let me get this straight. A STOCK rom like embryo? Or back to actual stock... I'm in slim bean 3.1. And then I have to flash a new modem? Current UCLI3.
Click to expand...
Click to collapse
First, a stock (or stock-based) ROM must be installed. Specifically, one that includes Samsung's serviceModeApp.apk in /system/app. This is required to support the *#197328640# dialer code that brings up the modem's service menu. ROM's such as CM9/CM10/AOKP/AOSP won't work for this because they don't have the service mode interface.
Second, a modem that supports the '[4] NW LOCK NV DATA INITIALIZE' command is required. The service mode menu items that are displayed and available are a function of the modem, not the ROM-- so only specific modems can be used to unlock with this method. So far it's confirmed that T-Mobile's UVLE1 and AT&T's UCLD2 have what it takes.
Just perform a nandroid backup of the current setup, flash an appropriate ROM and modem, factory reset, reboot, perform the network unlock, reboot, verify it's success with a non-accepted SIM, then restore the nandroid backup and re-flash the previous modem.
lart2150 said:
The last few days it's been going around unlocking the note II and gs3 with some settings(http://forum.xda-developers.com/showpost.php?p=34661189). Well the good news is the method can be used on our phones! I don't know what modems work I know two that don't. I was able to use the T989 modem (Tmo_SGH-T989_UVLE1_radio.zip)to unlock my phone. after I unlocked I switched back to UCLI3 and the phone is still unlocked.
You'll need to be on a stock rom and you should make sure the number matches the text next to it. All you need to do is touch the row to select it. I did these steps with a O2 sim card in my phone. after the reboot your phone might take a second but it should connect to the network and be happy with your non att sim.
I have not tested this on a rogers phone. It might work it might make your phone explode in your hand and kill you. For all I know it could do the same for other ATT phones.
Click to expand...
Click to collapse
Great job on the research buddy working fabulous on my all my rockets 3 to be exact lol although i am a person who doesnt mind paying its always awesome to have a free method
Awesomeness. I paid to unlock my old SR but I returned it due to battery issues (long story.) Being able to unlock my new phone and force 2G networks in CM10 would be awesome. I'll try this when I get home.
Tried it with the UCLD2 modem/rom and idk if it worked... Tried twice. Both times this happened. Wiped again re flashed. Same result.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
worked for me... does the unlock "stick" even if i change roms/radios?
norazi said:
worked for me... does the unlock "stick" even if i change roms/radios?
Click to expand...
Click to collapse
yeah it does
kchen96 said:
Tried it with the UCLD2 modem/rom and idk if it worked... Tried twice. Both times this happened. Wiped again re flashed. Same result.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
If you look at the OP he used ANOTHER sim card when doing all this. I think if you have an AT&T SIM in it doesn't work. I'm guessing that's it as I had an AT&T SIM in while I was doing it and it didn't work. Try a T-Mobile or other GSM sim and see what happens. I'll be doing that later.
Update: Apparently you do NOT need to have another SIM card in when you do this, as I was working on unlocking the phone with a T-Mobile card in and before I finished (I mean like I was on step 2) I got a T-mobile signal and was able to browse the web. Best advice I can give is when you reboot, make sure you wait for a good minute to see if the phone was unlocked, as you won't get a signal immediately even if it works.
WORKS ON ROGERS i727r
Just posting that I used the rom / modem posted in the 2nd post, and it worked great.
Thank you.
Worked like a dream.
Rocking a T-Mobile pre-paid SIM now.
Nice to have options.
Just did this about an hour ago it seemed to work c: recovered my backup and my service is fine. Gonna try on my brothers T-Mobile sim when I get home. Didn't flash another radio again though. Gonna try this one. I have constant text and call retrieving problems so yeah..
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I would like to report that I was successful unlocking while using skyICS, I just flashed the modem from the second post
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Tested last night. Method confirmed.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Smash2Bash said:
Tested last night. Method confirmed.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
word of advice may want to block out your number!!!
Yeah I noticed that but was a random sim doesn't even work anymore.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I helped a friend of mine root and flash his Galaxy S3 yesterday.. He ended up not liking the ROM we flashed onto the phone because MMS was not working on it. It was the Team Venom ROM I believe.. Then we tried flashing another ROM today (Illusion 1.1.1) and it messed up his service completely. The phone wouldn't connect to Verizon's network at all (it wouldn't send/receive text messages or phone calls) so we tried going back to Team Venom because we know it worked.. Now no matter what ROM we attempt to flash, it just either says, "Searching for service..." or "Hands free setup failed, retrying."
We attempted going through some steps we found in a post here on XDA about changing CDMA mode to RUIM, but there is no option for RUIM mode in his network settings.
I have at&t and have no idea how Verizon's network works or how to fix it, so some help would be greatly appreciated. Thanks.
It should have an option for sim in CDMA subscription type. Also go to phone status is his imei there?
Sent from my VS920 4G using xda app-developers app
kintwofan said:
It should have an option for sim in CDMA subscription type. Also go to phone status is his imei there?
Sent from my VS920 4G using xda app-developers app
Click to expand...
Click to collapse
Yes, we found the IMEI and managed to get it fixed. Disregard this thread please.
TreyChristopher said:
Yes, we found the IMEI and managed to get it fixed. Disregard this thread please.
Click to expand...
Click to collapse
Now back it up before flashing anything else
Sent from my VS920 4G using xda app-developers app
help
TreyChristopher said:
Yes, we found the IMEI and managed to get it fixed. Disregard this thread please.
Click to expand...
Click to collapse
I just did the same thing how did you fix it???
rworster said:
I just did the same thing how did you fix it???
Click to expand...
Click to collapse
what "same thing" and have you done the following:
check your phone status in system
system >about phone >phone status
if your imei is correct (a bunch of long numbers) then do following:
if you can boot up and just can't connect, go into system:
system settings >more >mobile networks >CDMA Subscription >select RUIM/SIM
this should fix your non-connect problems. IF YOU have done all this, and it still doesn't work, starting hitting google to find a solution that works, as this has been the main culprit.
:cyclops:
anyone know how to restore the hidden menu that allows the prl to be updated?
i am on the stock jb rom from the fxz thread. rooted of course.
currently i go into the ##DATA# menu but there is no view option to update the prl?
i admit i could be derpy and missing something obvious..
wolficus said:
anyone know how to restore the hidden menu that allows the prl to be updated?
i am on the stock jb rom from the fxz thread. rooted of course.
currently i go into the ##DATA# menu but there is no view option to update the prl?
i admit i could be derpy and missing something obvious..
Click to expand...
Click to collapse
I haven't been on stock in a while, but I thought there was an option in Settings --> System update or something? There should be a 'Update PRL' option.
Dang... my bad. I should have mentioned it being a custom prl for roaming with 3g.
Sent from my XT897 using Tapatalk 2
What do you mean 'restore'? Maybe I missed it (or just don't remember it otherwise), but I don't ever remember reading about the P-Q having such a feature in a menu. The only way I've known to manually push a different PRL is via QPST.
PythonFanTN said:
What do you mean 'restore'? Maybe I missed it (or just don't remember it otherwise), but I don't ever remember reading about the P-Q having such a feature in a menu. The only way I've known to manually push a different PRL is via QPST.
Click to expand...
Click to collapse
Ahh ic... the restore was based on other forum reading were they mentioned how to flash a prl just by using the hidden menus. They mentioned a view option which got hidden in a later sprint update.... might have been for other phones only though.
If that's the case... then I will work on the qpst method.
I am rather new to custom prl updating...
Sent from my XT897 using Tapatalk 2
I will just leave this here.
http://forum.xda-developers.com/showthread.php?t=1880781 & http://forum.xda-developers.com/showthread.php?t=1211157
Just make sure you search for drivers on windows *in all modes* becase there is a diffrent driver needed to see the phone while it is in bootloader mode than what is needed while the system is running.
hfase said:
I will just leave this here.
http://forum.xda-developers.com/showthread.php?t=1880781 & http://forum.xda-developers.com/showthread.php?t=1211157
Just make sure you search for drivers on windows *in all modes* becase there is a diffrent driver needed to see the phone while it is in bootloader mode than what is needed while the system is running.
Click to expand...
Click to collapse
hehe i had actually sent those as links to my email so i could find them thanks though.
i did find a couple of errors with them... 1. i had to get qpst 378 for the new jb rom. then it would see my phone.. the other was getting into the bootloader menu. i had to press up+down together to get the menu. pressing just down got me to fastboot. after a couple of hours i managed to figure it all out...
needless to say i am not using prl 56015 and now have full 3g roaming
i can see why you have to be careful with qpst though... it reminds me of the old nokia (candy bard phone days) diag program. oh you could mess a phone up good with that... all i wanted was to trun drm protection off so i could make my own ringtones
i thank you all for your help i will post a few notes on the other forums on what i had to do.. hopefully to help others.
Yeah I ran that PRL for a little while, it took so long to search though I decided to switch back to 16015.
I am pretty sure if you mess anything up with QPST you can fix by flashing the FXZ again. (that is, if you didn't make Sprint mad roaming a ton.) After you do that, and whatever PRL work you need you can then flash a recovery or rom again.
I believe there is an app to swap PRL's on the fly if you really want, but I think that would be on s4gru.com somewhere.
hfase said:
Yeah I ran that PRL for a little while, it took so long to search though I decided to switch back to 16015.
I am pretty sure if you mess anything up with QPST you can fix by flashing the FXZ again. (that is, if you didn't make Sprint mad roaming a ton.) After you do that, and whatever PRL work you need you can then flash a recovery or rom again.
I believe there is an app to swap PRL's on the fly if you really want, but I think that would be on s4gru.com somewhere.
Click to expand...
Click to collapse
not sure i follow what you mean by search? it connected right up to 3g for me.... if thats what you mean...
hmm... will have to keep that in mind. just in case i switch prls and kill it
wolficus said:
not sure i follow what you mean by search? it connected right up to 3g for me.... if thats what you mean...
hmm... will have to keep that in mind. just in case i switch prls and kill it
Click to expand...
Click to collapse
Yup that's what I meant, could be attributed to the area I am in though. Good luck!
whats the difference between a Ship & NoShip firmware. i have a Samsung Galaxy S3 SCH-S968C TracFone, i semi-bricked the phone trying to unlock it so it doesnt boot, only download mode works. i'm on the hunt to find a full firmware to write to the phone but i'm seing 2 firmwares, one labeled ship and one labeled no ship. the question is what is the difference between the two?
yanxs said:
whats the difference between a Ship & NoShip firmware. i have a Samsung Galaxy S3 SCH-S968C TracFone, i semi-bricked the phone trying to unlock it so it doesnt boot, only download mode works. i'm on the hunt to find a full firmware to write to the phone but i'm seing 2 firmwares, one labeled ship and one labeled no ship. the question is what is the difference between the two?
Click to expand...
Click to collapse
Use Kies to recover it... it works
Viper
help, please!!!!
I'm not really a newbie, but haven't really had an android in my hands for a while and EVERYTHING IS SO DIFFERENT!!!! I have a gs3 (sch-s968c) which is the galaxy s3 available from straight talk. I wanted to reserve power and take out all the bloatware, so I attempted to root it, using Odin. I tried it 7 times so far and it has not been successful. Now when I enter recovery mode I keep getting a screen that says:
odin mode
product name:sch-s968c
custom Binary download: yes (7 counts)
current binary: Custom
system status: official
qualcomm secureboot: enable
followed by: "firmware upgrade encountered an issue. Please select recovery mode in kies & try again"
Here's the issues: I did not ensure that I had the correct drivers and didn't have kies set up (new to kies). I can not find drivers for this exact model, and the computer is not recognizing my phone when it's plugged in (no opportunity to explore phone files)
Right now I have the sd card out (it came from a sorry explanation for a droid from straight talk (lg optimus, I think). I CAN STILL, HOWEVER, GET INTO DOWNLOAD MODE.
PLEASE HELP ME!!!!
Quick Question
Where are you finding these firmwares? i flashed the wrong rom on it and i lost service...
Dat_Guy said:
Where are you finding these firmwares? i flashed the wrong rom on it and i lost service...
Click to expand...
Click to collapse
yes.. where please?
johneightyone said:
yes.. where please?
Click to expand...
Click to collapse
I've lost service as well. I rooted using the Impactor method. Root was successful, I downloaded and successfully flashed the latest version of CWM Touch Recovery, then I flashed the newest version of BeanStalk ROM. The phone wouldn't get passed the "Select Language" section without bootlooping. So I pulled the battery, booted back into Recovery, wiped and re-installed my Nandroid backup. After I restored, my phone wouldn't receive service or data. Also, under About Device/Status, the network now says Unknown, Mobile network type says Unknown, Service state says Out of service, and my Phone number also says Unknown. How do I re-register my device back onto the Straight Talk network?? If I install CM 10.2 will that fix my issues? Or am I at the mercy of the Straight Talk Customer Service gurus? Is there anyway to manually program my device back onto the network?
Bullhead00 said:
I've lost service as well. I rooted using the Impactor method. Root was successful, I downloaded and successfully flashed the latest version of CWM Touch Recovery, then I flashed the newest version of BeanStalk ROM. The phone wouldn't get passed the "Select Language" section without bootlooping. So I pulled the battery, booted back into Recovery, wiped and re-installed my Nandroid backup. After I restored, my phone wouldn't receive service or data. Also, under About Device/Status, the network now says Unknown, Mobile network type says Unknown, Service state says Out of service, and my Phone number also says Unknown. How do I re-register my device back onto the Straight Talk network?? If I install CM 10.2 will that fix my issues? Or am I at the mercy of the Straight Talk Customer Service gurus? Is there anyway to manually program my device back onto the network?
Click to expand...
Click to collapse
Have you tried this?
https://play.google.com/store/apps/details?id=com.tracfone.straighttalk.stdatasettings
johneightyone said:
Have you tried this?
https://play.google.com/store/apps/details?id=com.tracfone.straighttalk.stdatasettings
Click to expand...
Click to collapse
This APP is asking for a SIM card to be inserted into a GSM phone. MY phone is the CDMA variant that doesn't use a SIM card. Is there any other way to get this phone registered onto the network? I guess I'm about to call Straight Talk to see what their tech support (if any) can figure out.
If it helps any, My Network says Unknown, Service State says Out of service, Mobile network state says Disconnected, My phone number says Unknown, the MIN says Unknown, PRL version is set to 1, IP address is Unavailable, and under device it says Modified.
Bullhead00 said:
If it helps any, My Network says Unknown, Service State says Out of service, Mobile network state says Disconnected, My phone number says Unknown, the MIN says Unknown, PRL version is set to 1, IP address is Unavailable, and under device it says Modified.
Click to expand...
Click to collapse
at home, i have the packet for the BYOP plan, and in it is a QR code for both GSM and another for CDMA versions.. This is supposed to take you to download an app that will up your settings for you. Guess the linked one above is for GSM only. When i get home, I will scan that and give you the latest link.
Good luck with Straight talk "support"..
johneightyone said:
at home, i have the packet for the BYOP plan, and in it is a QR code for both GSM and another for CDMA versions.. This is supposed to take you to download an app that will up your settings for you. Guess the linked one above is for GSM only. When i get home, I will scan that and give you the latest link.
Good luck with Straight talk "support"..
Click to expand...
Click to collapse
That would be greatly appreciated! The Straight Talk support line was of no help at all. Basically just told me to get a new phone. I find it hard to believe that it's impossible to get the settings back to where they need to be. I appreciate your help!
Sent from my SCH-I545 using xda app-developers app
Bullhead00 said:
That would be greatly appreciated! The Straight Talk support line was of no help at all. Basically just told me to get a new phone. I find it hard to believe that it's impossible to get the settings back to where they need to be. I appreciate your help!
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Sorry, bad news... that QR code points to the app i already sent you.. so i guess that's not going to help.
I found this though..
http://apn-settings.com/straight-talk-apn-settings-configuration/
Might be worth trying to set your settings to that to see what happens.
I know when i flashed CM10.2 and CM11 on mine, the data settings worked without me having to change anything.. so that maybe something worth trying.
No luck with anything. I believe my problem was flashing a native Verizon TW ROM, instead of just going the AOSP route. Maybe the kernel or the modem/radio conflicted with it somehow, kicking it completely off of the network. What is the PRL supposed to be? My PRL is set to "1". I'm thinking that could be the reason it can't see the network.
Is there any way to either manually program the phone onto the network, or either reflash the stock kernel or radio?
Sent from my SCH-I545 using xda app-developers app
Bullhead00 said:
No luck with anything. I believe my problem was flashing a native Verizon TW ROM, instead of just going the AOSP route. Maybe the kernel or the modem/radio conflicted with it somehow, kicking it completely off of the network. What is the PRL supposed to be? My PRL is set to "1". I'm thinking that could be the reason it can't see the network.
Is there any way to either manually program the phone onto the network, or either reflash the stock kernel or radio?
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
See if this link helps at all.
http://forum.xda-developers.com/showthread.php?t=2557601&page=5
I think they were having the same thing.
Sent from my Transformer TF101 using Tapatalk
Bullhead00 said:
No luck with anything. I believe my problem was flashing a native Verizon TW ROM, instead of just going the AOSP route. Maybe the kernel or the modem/radio conflicted with it somehow, kicking it completely off of the network. What is the PRL supposed to be? My PRL is set to "1". I'm thinking that could be the reason it can't see the network.
Is there any way to either manually program the phone onto the network, or either reflash the stock kernel or radio?
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
hmm maybe dial which is the number to program phones *228990 .but it could brick (not responsible if it does.)
For what it's worth, check this out. It's possible CM is now ready for your device, but do not quote me on this.
http://review.cyanogenmod.org/#/c/61149/
Help
Bullhead00 said:
I've lost service as well. I rooted using the Impactor method. Root was successful, I downloaded and successfully flashed the latest version of CWM Touch Recovery, then I flashed the newest version of BeanStalk ROM. The phone wouldn't get passed the "Select Language" section without bootlooping. So I pulled the battery, booted back into Recovery, wiped and re-installed my Nandroid backup. After I restored, my phone wouldn't receive service or data. Also, under About Device/Status, the network now says Unknown, Mobile network type says Unknown, Service state says Out of service, and my Phone number also says Unknown. How do I re-register my device back onto the Straight Talk network?? If I install CM 10.2 will that fix my issues? Or am I at the mercy of the Straight Talk Customer Service gurus? Is there anyway to manually program my device back onto the network?
Click to expand...
Click to collapse
There isnt really a way to program the device manually...but might i make a suggestion? try resetting the phone. now that you have the nandroid restore done, try going ahead and doing a factory reset from the settings. Surprisingly it helped my issue.
I've ran into this problem myself. I tried restoring to a backup and installing different ROMs. The only thing that worked was to Odin back to stock ST and start fresh. I have the file if anyone needs it
Sent from my SCH-S968C using xda app-developers app
Debrick Image?
kenny1974 said:
I've ran into this problem myself. I tried restoring to a backup and installing different ROMs. The only thing that worked was to Odin back to stock ST and start fresh. I have the file if anyone needs it
Sent from my SCH-S968C using xda app-developers app
Click to expand...
Click to collapse
Can Someone do an adb shell and get me a debrick.img
su
and then
dd if=/dev/block/mmcblk0 of=/sdcard/debrick.img bs=4096 count=50000
or use ShabbyPenguins Unbrick-Creator.zip would have to google it wont let me post the link
Here is a link to my Odin file. Use this to return to stock sch-s968s. http://forum.xda-developers.com/showthread.php?p=51937481
Sent from my SCH-I535 using xda app-developers app