[Q] Acer Iconia [A700] CAN'T UPDATE - Acer Iconia A700 and A510

Hi everyone, i'm new here as you can see... I had installed Android 4.2.1 CM10.1 Nightly ROM in the last 2-3 days but now I am to stock firmware, I've unrooted my device successfully after reading all the threads in this forum, BUT it seems that I can't find any method to download my original recovery kernel image because I can't install any new updates, it says: "Entering recovery kernel image" a loading bar appear under the android logo and after that an android logo with the red exclamation mark. I couldn't find any helpful information on how to bypass this error here in this forum so PLEASE HELP ME, I don't know what to do...I've spend almost 2 days trying to figure it out and nothing. THANK YOU IN ADVANCE and sorry for "my english".

When i put the device into fastboot mode and run the command "fastboot oem lock" i've got this message on the screen: "The system.img is not a official image"

I am assuming that no one knows... now i screwed up things and i deleted my recovery img, tablet doesn't enter recovery mode anymore. Please guys i'm begging you, i'm desperate...what should I do???

You cannot "re-lock" your bootloader once you have unlocked it. Although, a few users have has success re-locking it after installing certain ICS stock roms. You may have to try several ICS stock roms and get lucky.
You can get a stock recovery image for the 700/701 here in the dev forum. Just make sure you select the one for your OS. (ICS-JB). Don't mix them.
Typically, once you do OEM unlock, you will not be able to get OTA updates. 50-50
MD

Moscow Desire said:
You cannot "re-lock" your bootloader once you have unlocked it. Although, a few users have has success re-locking it after installing certain ICS stock roms. You may have to try several ICS stock roms and get lucky.
You can get a stock recovery image for the 700/701 here in the dev forum. Just make sure you select the one for your OS. (ICS-JB). Don't mix them.
Typically, once you do OEM unlock, you will not be able to get OTA updates. 50-50
MD
Click to expand...
Click to collapse
Thank you, i've made it reinstalling recovery image, everything working fine. From what I understand my warranty is gone, even if I install ICS they will know.
I can install updates but only manually...renaming file in update.zip but before modifying in "META-INF"...google...com the updater script the line with "assert prop".

Moscow Desire said:
You cannot "re-lock" your bootloader once you have unlocked it. Although, a few users have has success re-locking it after installing certain ICS stock roms. You may have to try several ICS stock roms and get lucky.
You can get a stock recovery image for the 700/701 here in the dev forum. Just make sure you select the one for your OS. (ICS-JB). Don't mix them.
Typically, once you do OEM unlock, you will not be able to get OTA updates. 50-50
MD
Click to expand...
Click to collapse
On the end of the update (flashing update.zip trough cwm) proces i got the question if i want to keep cwm recovery, when not stock was installed. (or am i confused?)

Related

Can you restore a nexus s to "factory" settings to receive OTA updates?

Hi Guys, as subject really! Is it possible to get the phone in a "Google" state to pull down updates, obviously meaning the impending ICS one!
B
I'm implying that you're on a custom ROM at the moment. You'll have to flash one of the stock ROM images, then you can get OTA's again.
It doesn't matter if you're rooted or have an unlocked bootloader.
Greetz
frutelaken said:
I'm implying that you're on a custom ROM at the moment. You'll have to flash one of the stock ROM images, then you can get OTA's again.
It doesn't matter if you're rooted or have an unlocked bootloader.
Greetz
Click to expand...
Click to collapse
Hey mate, thankyou for helping. I've not actually received it yet, bought one off ebay and I am just pre-empting - If you flash stock does the root and unlocked bootloader become standard again??
(I'm upgrading from an old Galaxy 3, so am reasonably familiar with flashing, but want a simple life now and am going stock Google )
B
Nope, flashing a stock image will not affect your bootloader being unlocked. You'll have to run the "fastboot oem lock" command to lock the bootloader again. Check one of the turorials here
Greetz
//edit: Actually, I'm suddenly not sure of this. Sunday evenings' got me confused. Please wait for someone else to verify.
Thankyou I'll have a look round
I have been flashing several ROMs using ROM Manager and the bootloader wasn't affected by this. The stock OTAs kept unrooting the phone though.
n00bfuscator said:
I have been flashing several ROMs using ROM Manager and the bootloader wasn't affected by this. The stock OTAs kept unrooting the phone though.
Click to expand...
Click to collapse
That's normal, the OTA's reset the permissions on key folders, effectively SU looses it's execute permissions, removing root. What i do now is download the OTA to the SD card, apply it, re-apply the SU.zip to keep root, modify the restore-recovery script so i can keep CWM, then reboot.
I'm not sure how it's going to go with ICS, but we shall see.

Q A700: Is it possible to lock an unlocked A700?

As I have no succes in installing the OTA update for my A700, and cant get the solution offered somewhere else here to work, i have a question:
Is it possible to lock an unlocked A700 again? After which - i think - it should be able to install the OTA.
Anyone here knows if this is possible?
I was in the same situation, until I flashed an emea_cus1 version. I hope you get this answered, or someone comes up with a flashable pa_cus1 version.
Consider this a bump...
Sent from my A700 using XDA Premium HD app
Can you or anyone tell me what is the difference between emea_cus1 & pa_cus1 versions?
As above, anyone with flashable pa_cus1 version?
i heard that 'unlock' is unrecoverable. Maybe it's work if you can use Flash Tool to flash the whole system by computer.
but there'r no any resources available by now.
I had to do this myself a couple days back so I could return to stock. I made this quick link-list.
1. Get Android SDK & the official Acer USB Drivers http://developer.android.com/sdk/index.html http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=4318
2. Unlock the bootloader: http://forum.xda-developers.com/showthread.php?t=1710755
3. Install Clockwork Recovery: http://forum.xda-developers.com/showthread.php?t=1791165
- I had to install this recovery.img using the BAT file from this post. IMPORTANT! DO NOT INSTALL THE recovery.img FROM THAT LINK! It will brick you. Replace it with the one from the thread above (6.0.1.0).
4. Download the appropriate ROM for your device. You'll want the first CUS1 as it is 1.0.29: http://forum.xda-developers.com/showthread.php?t=1729692
5. Follow the directions in this link. If you can't get update.zip to run from an external SD (I couldn't) then try it from the root directory of your internal SD (I just noticed the post was updated after I messaged him). http://forum.xda-developers.com/sho...m.xda-developers.com/showthread.php?t=1812635
After you've done it all, be sure to choose "NO" when you reboot the system from CWM, otherwise CWM is still going to be there and you're probably going to be unable to get future updates.
It took me about two hours of trial and error to figure all this out, and in the end my bootloader was relocked, my root was unrooted, and I was on stock 1.0.29 and able to get OTA updates.
ExtremeRyno said:
I had to do this myself a couple days back so I could return to stock. I made this quick link-list.
1. Get Android SDK & the official Acer USB Drivers http://developer.android.com/sdk/index.html http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=4318
2. Unlock the bootloader: http://forum.xda-developers.com/showthread.php?t=1710755
3. Install Clockwork Recovery: http://forum.xda-developers.com/showthread.php?t=1791165
- I had to install this recovery.img using the BAT file from this post. IMPORTANT! DO NOT INSTALL THE recovery.img FROM THAT LINK! It will brick you. Replace it with the one from the thread above (6.0.1.0).
4. Download the appropriate ROM for your device. You'll want the first CUS1 as it is 1.0.29: http://forum.xda-developers.com/showthread.php?t=1729692
5. Follow the directions in this link. If you can't get update.zip to run from an external SD (I couldn't) then try it from the root directory of your internal SD (I just noticed the post was updated after I messaged him). http://forum.xda-developers.com/sho...m.xda-developers.com/showthread.php?t=1812635
After you've done it all, be sure to choose "NO" when you reboot the system from CWM, otherwise CWM is still going to be there and you're probably going to be unable to get future updates.
It took me about two hours of trial and error to figure all this out, and in the end my bootloader was relocked, my root was unrooted, and I was on stock 1.0.29 and able to get OTA updates.
Click to expand...
Click to collapse
Thanks for your answer. Now I just am left with one question. I have image version Acer_AV043_A700_1.026.00_WW_GEN1
The CUS1 you mention can be flashed over that without a problem, after which I should be able to use the OTA from Acer?
CheopsChefren said:
Thanks for your answer. Now I just am left with one question. I have image version Acer_AV043_A700_1.026.00_WW_GEN1
The CUS1 you mention can be flashed over that without a problem, after which I should be able to use the OTA from Acer?
Click to expand...
Click to collapse
Whoops..I originally posted this on another forum where someone asked the same question. They had the US tablet. Get the appropriate file for your country/device. After you flash your country's stock, you will be able to get OTA updates. This relocks and unroots your device back like new.
ExtremeRyno said:
Whoops..I originally posted this on another forum where someone asked the same question. They had the US tablet. Get the appropriate file for your country/device. After you flash your country's stock, you will be able to get OTA updates. This relocks and unroots your device back like new.
Click to expand...
Click to collapse
i need to take my a701 back to acer so i have flashed my a701 back to ICS with Acer_AV043_A701_1.015.00_WW_GEN1 (got from somewhere in this forum i think, i forgot ... sorry). the process went without any trouble.
but my bootloader is still unlock.
when i try the fastboot oem lock .. it showed the lock lock and the door icon on the display ... choose the lock ... and the display show "Please wait.."
wait for more than half an hour .. still "Please wait" and i decided to turnoff the device.
my question is how long does it take to relock (fastboot oem lock) the bootloader? please advice. Thanks

[Q] HTC One S Root OTA Update Questions

Hello Everyone,
As of today, my phone received the new OTA Update for my HTC One S. However, obviously I cannot update due to my phone being rooted. As a person who is still relatively new with rooting (about a month rooted with my phone-first time), I have a couple questions.
First and foremost, have you guys enjoyed the OTA Update so far? I have read about the list of improvements, and they look promising.
Secondly, I obviously want to stay rooted, are there any suggestions about how to update and then have my phone rooted? Preferably without losing my root, but I don't think that's possible.
Thirdly, I saw a thread about the viper (I believe that's what it's called) rom and that could be my possible solution. But, I am rooted on stock rom and have never put on another rom before. So what are your thoughts on this rom?
Thanks in advance
Sent from my HTC VLE_U using xda app-developers app
Problem Fixed
DrOfLife said:
Hello Everyone,
As of today, my phone received the new OTA Update for my HTC One S. However, obviously I cannot update due to my phone being rooted. As a person who is still relatively new with rooting (about a month rooted with my phone-first time), I have a couple questions.
First and foremost, have you guys enjoyed the OTA Update so far? I have read about the list of improvements, and they look promising.
Secondly, I obviously want to stay rooted, are there any suggestions about how to update and then have my phone rooted? Preferably without losing my root, but I don't think that's possible.
Thirdly, I saw a thread about the viper (I believe that's what it's called) rom and that could be my possible solution. But, I am rooted on stock rom and have never put on another rom before. So what are your thoughts on this rom?
Thanks in advance
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Hey Dr.
I had the same issue and fixed it. I'm enjoying the OTA update...seems snappier and the option to change the menu button and get rid of that eyesore at the bottom of the screen is great....See this post on how to fix it:
http://forum.xda-developers.com/showthread.php?p=32069130
All you have to do is download the stock recovery (link located in the post above), rename it "Recovery.IMG" and put it in the /Data/Recoveries folder that your All In One Kit uses. Then open up the All In One root kit, flash the stock recovery, and reboot your phone. It should look the same, and give you the same notification that an update is available. Install the update, and then reflash your TWRP or CWM and reroot (the OTA unroots the device, so you need to reinstall SuperSu.
Thanks to all the people that have helped me do the same!!!
fsustrength said:
Hey Dr.
I had the same issue and fixed it. I'm enjoying the OTA update...seems snappier and the option to change the menu button and get rid of that eyesore at the bottom of the screen is great....See this post on how to fix it:
http://forum.xda-developers.com/showthread.php?p=32069130
All you have to do is download the stock recovery (link located in the post above), rename it "Recovery.IMG" and put it in the /Data/Recoveries folder that your All In One Kit uses. Then open up the All In One root kit, flash the stock recovery, and reboot your phone. It should look the same, and give you the same notification that an update is available. Install the update, and then reflash your TWRP or CWM and reroot (the OTA unroots the device, so you need to reinstall SuperSu.
Thanks to all the people that have helped me do the same!!!
Click to expand...
Click to collapse
I keep flashing the stock recovery with all-in-one and then downloading and installing the update. Everytime, about halfway it goes back to the red triangle with the exclamation point and restarts the phone five minutes later.
I check software and its still 4.0.3 and the update redownloads. I've tried several "stock recoveries" and the update afterwards... never works.
TheAdictsPunk said:
I keep flashing the stock recovery with all-in-one and then downloading and installing the update. Everytime, about halfway it goes back to the red triangle with the exclamation point and restarts the phone five minutes later.
I check software and its still 4.0.3 and the update redownloads. I've tried several "stock recoveries" and the update afterwards... never works.
Click to expand...
Click to collapse
I have also tried the steps and have run into the same problem. All is well when I flash into recovery, but when the phone starts updating about quarter or half-way through it also gives me the same red error message and the phone restarts soon after with no update. I have tried several times with the same problem.
However, thanks fsustrength for the instructions, before I was getting no where, but now I almost got it
Sent from my HTC VLE_U using xda app-developers app
ckpv5 said:
As there are many questions on how to do OTA update & to revert to stock after a device is rooted and bootloader unlocked; I made this simple guide which I hope will help the newbies especially.
NOTE : always do a backup and a nandroid backup before trying any of these.
OTA update:
A) ROM is stock, bootloader unlocked, stock recovery and not rooted.
- just run the OTA update, there is no need to relock the bootloader
B) ROM is stock, bootloader unlocked, CWM recovery and not rooted.
- flash the stock recovery that comes with your RUU, extract the RUU for the stock recovery.
* boot to bootloader
* fastboot flash recovery recovery_signed.img
* fastboot reboot-bootloader
* fastboot erase cache
* fastboot reboot
- run the OTA update
C) ROM is stock, bootloader unlocked, stock recovery and rooted
- download OTA Rootkeeper from Play Store
- run the OTA Rootkeeper and click protect root
- run the OTA update, there is no need to relock bootloader
- Once done, run OTA Rootkeeper and click restore root
D) ROM is stock, bootloader unlocked, CWM recovery and rooted
- download OTA Rootkeeper from Play Store
- run the OTA Rootkeeper and click protect root
- no need to relock bootloader
- boot to bootloader and fastboot flash the stock recovery
- run the OTA update
- Once done, run OTA Rootkeeper and click restore root
E) ROM is custom, bootloader unlocked, CWM recovery and rooted and you have a stock nandroid backup
- flash the stock boot.img if after nandroid restore, you have a bootloop
- flash the stock recovery.img
- relock the bootloader - fastboot oem lock
- boot your device and run the OTA update
F) ROM is custom, bootloader unlocked, CWM recovery and rooted and you don't have a stock nandroid backup
- if you dont have the stock nandroid backup, you need to run RUU
- before you can run the RUU you need to:
* flash the stock recovery.img
* flash the stock boot.img (maybe no need)
* relock the bootloader - fastboot oem lock
* run RUU
- run device setup
- run the OTA update
Flashing RUU to revert to stock or to update your One V after you have a custom ROM installed.
- you must have the correct RUU for your device.
- if you are not sure, download CID Getter from Play Store and run it, it will show your CID.
- with your CID, you may be able to find a correct RUU for your device
then (even though some people may not agree with this, but this will bring no harm and it is noob-proof) do this:
1- flash a stock recovery.img
fastboot flash recovery recovery_signed.img
fastboot reboot-bootloader
fastboot erase cache
2- flash a stock boot.img
fastboot flash boot boot_signed.img
fastboot reboot-bootloader
fastboot erase cache
3- re-lock bootloader
fastboot oem lock
fastboot reboot-bootloader
fastboot erase cache
4- flash RUU
Note : for people with ERROR 155 UNKNOWN ERROR they need to go into HBOOT and select FASTBOOT and run the RUU to revert to stock (thanks Lloir)
And usually:
Error 155 - usually wrong recovery.img /wrong boot.img
Error 140 - wrong bootloader / bootloader unlocked
Error 131 - wrong RUU for your device
Credit to all XDA members that posted all the guides in various forum thread and some from own experience which I compiled here for easy reference.
Click to expand...
Click to collapse
Some wonderful person wrote a guide for the One V. Every though it's not the same phone the rules are the same. If these instructions help you click the link and thank the guy for writing it.
http://forum.xda-developers.com/showpost.php?p=27288357&postcount=1
Wow, that is a very useful guide right there! However, while reading the guide, Step D is exactly what both TheAdictsPunk and I seem to have done (I'm making an assumption that he did). I did in fact have and used the root keeper app, put it on temporary unroot, and flashed the stock rom and ran the update. Yet, I still run into the problem of the red error sign. I'm sure there is a factor that maybe could cause it to stop, but I cannot put a finger on it.
However, I did notice something while following the procedures of the guide on my phone. When I flash the stock rom on my phone, I have to re-download the system update. While downloading the system update I notice that some of my apps get root permissions from SuperSu in the background, even though in root keeper I temporarily took off root. Rootkeeper also states that my phone is unrooted. Could this problem cause the red error message? If so, any way to fix it?
Sent from my HTC VLE_U using xda app-developers app
DrOfLife said:
Wow, that is a very useful guide right there! However, while reading the guide, Step D is exactly what both TheAdictsPunk and I seem to have done (I'm making an assumption that he did).
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
I did! Last night I even tried flashing the recovery image through fastboot instead of the all-in-one kit. Then, even, the recovery image wouldn't flash all the way through... maybe our phones are having a problem with the recovery being reflashed and not the update at all.
I had the same exact issue. I finally got fed up and just flashed the RUU with my computer and then just used the All-in-one program to re-root. I am now enjoying 2.31 and really glad I updated. Obviously the RUU wipes everything, but I had done a full backup using Titanium Backup, and then restored all the important settings and data (like accounts, wifi list, bookmarks, dictionary, etc.) (but not the system apps themselves! ) and it worked out pretty well. Still had some things to adjust, like sounds and such. If you want to keep your SMS's use the built-in backup in the messaging app, then restore after the update.. more reliable than any other app I've tried.
mmceorange said:
I had the same exact issue. I finally got fed up and just flashed the RUU with my computer and then just used the All-in-one program to re-root. I am now enjoying 2.31 and really glad I updated. Obviously the RUU wipes everything, but I had done a full backup using Titanium Backup, and then restored all the important settings and data (like accounts, wifi list, bookmarks, dictionary, etc.) (but not the system apps themselves! ) and it worked out pretty well. Still had some things to adjust, like sounds and such. If you want to keep your SMS's use the built-in backup in the messaging app, then restore after the update.. more reliable than any other app I've tried.
Click to expand...
Click to collapse
I'm strongly considering doing that, I can back all my contacts and apps and sms messages via Mobile Go. So, wiping my phone isn't too big of an issue for me because I can restore almost everything I need back on my phone. If you don't mind me asking, where did you get the source that you got the RUU? Also, I have never flashed an ruu before so is their a guide for our phone to flash a RUU?
Sent from my HTC VLE_U using xda app-developers app
DrOfLife said:
I'm strongly considering doing that, I can back all my contacts and apps and sms messages via Mobile Go. So, wiping my phone isn't too big of an issue for me because I can restore almost everything I need back on my phone. If you don't mind me asking, where did you get the source that you got the RUU? Also, I have never flashed an ruu before so is their a guide for our phone to flash a RUU?
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
http://www.lastnite.de/RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5.exe
Links to downloads are on that page.. just copy/paste.
Basically start your phone in fastboot, connect to usb, then run the ruu with admin privileges. Make sure you are on stock recovery, and already have the USB drivers installed on your PC (unless you're on Linux.. already has them.. and maybe Mac too?)
mmceorange said:
http://www.lastnite.de/RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5.exe
Links to downloads are on that page.. just copy/paste.
Basically start your phone in fastboot, connect to usb, then run the ruu with admin privileges. Make sure you are on stock recovery, and already have the USB drivers installed on your PC (unless you're on Linux.. already has them.. and maybe Mac too?)
Click to expand...
Click to collapse
Well I followed all your steps, and all was going well until I ran across RUU error 130, which states that it was using the incorrect RUU. I looked into it and I found that it was the Europe version, and I have the T-Mobile version of my phone. I'm assuming that this is the issue, am I right? Does the RUU in Europe different than the T-Mobile USA one? If so, are there any RUU's out there that cover my phone? I have searched for them with no luck..
Sent from my HTC VLE_U using xda app-developers app
DrOfLife said:
Well I followed all your steps, and all was going well until I ran across RUU error 130, which states that it was using the incorrect RUU. I looked into it and I found that it was the Europe version, and I have the T-Mobile version of my phone. I'm assuming that this is the issue, am I right? Does the RUU in Europe different than the T-Mobile USA one? If so, are there any RUU's out there that cover my phone? I have searched for them with no luck..
Click to expand...
Click to collapse
Ok I figured out a couple answers to my questions. One, the Europe version and the T-Mobile Version are different. That explains why the RUU did not work and gave me Error 130. However, the T-Mobile RUU, RUU_Ville_U_TMOUS_1.84.531.2_R2_Radio_0.16.31501S, is the alternate version that also recieves the OTA update. The RUU is found here http://androidforums.com/one-s-all-things-root/560329-ruu-download-mirrors.html
Then, following the steps, I have successfully updated my phone to the newer softeware!
But of course, I run into another problem.... The CWM recovery does not work for my phone. I flashed the recovery via the HTC One S All-in-One Toolkit. But when getting my phone into recovery mode, it "crashes." (By crashes I mean the phone will go into the htc developmental screen, then turn to black, then reload the normal bootup screen and boot normally up) So, I don't have CWM and I'm unable to root my phone again because I don't have CWM to flash SuperSu. Any thoughts on this?
Rerooting
DrOfLife said:
So, I don't have CWM and I'm unable to root my phone again because I don't have CWM to flash SuperSu. Any thoughts on this?
Click to expand...
Click to collapse
I'm still running stock 1.84, but I'm rooted and unlocked. I do not have any kind recovery like CWM or TWRP. You may have to flash a stock recovery image in order to re-install the recovery of your choice. If you want to get rooted again try this method: http://forum.xda-developers.com/showthread.php?t=1577831 It's what I used to gain root. It's a rather easy to follow guide. I used this instead of the AIO kit.
I'm going to try and revert to locked and unroot in order to get the update. Wish me luck.
DrOfLife said:
Well I followed all your steps, and all was going well until I ran across RUU error 130, which states that it was using the incorrect RUU. I looked into it and I found that it was the Europe version, and I have the T-Mobile version of my phone. I'm assuming that this is the issue, am I right? Does the RUU in Europe different than the T-Mobile USA one? If so, are there any RUU's out there that cover my phone? I have searched for them with no luck..
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Oh lol sorry about that.
DrOfLife said:
Ok I figured out a couple answers to my questions. One, the Europe version and the T-Mobile Version are different. That explains why the RUU did not work and gave me Error 130. However, the T-Mobile RUU, RUU_Ville_U_TMOUS_1.84.531.2_R2_Radio_0.16.31501S, is the alternate version that also recieves the OTA update. The RUU is found here http://androidforums.com/one-s-all-things-root/560329-ruu-download-mirrors.html
Then, following the steps, I have successfully updated my phone to the newer softeware!
Click to expand...
Click to collapse
Awesome!
DrOfLife said:
But of course, I run into another problem.... The CWM recovery does not work for my phone. I flashed the recovery via the HTC One S All-in-One Toolkit. But when getting my phone into recovery mode, it "crashes." (By crashes I mean the phone will go into the htc developmental screen, then turn to black, then reload the normal bootup screen and boot normally up) So, I don't have CWM and I'm unable to root my phone again because I don't have CWM to flash SuperSu. Any thoughts on this?
Click to expand...
Click to collapse
I personally have never encountered that before, so I am of little help here. The suggestion above me sounds like the right direction though.
Red triangle error
dc211 said:
Some wonderful person wrote a guide for the One V. Every though it's not the same phone the rules are the same. If these instructions help you click the link and thank the guy for writing it.
http://forum.xda-developers.com/showpost.php?p=27288357&postcount=1
Click to expand...
Click to collapse
I'm using method C, i still get that red triangle error. Also i can't get the ruu for my phone. I'm desperate can you please help me.
lonegunman0 said:
I'm using method C, i still get that red triangle error. Also i can't get the ruu for my phone. I'm desperate can you please help me.
Click to expand...
Click to collapse
Im getting the same thing. Even after flashing "stock recovery" that i got from the modaco link, I can't update or even go into the stock recovery...I would absolutely love to enjoy the update too!
skidmarc11 said:
Im getting the same thing. Even after flashing "stock recovery" that i got from the modaco link, I can't update or even go into the stock recovery...I would absolutely love to enjoy the update too!
Click to expand...
Click to collapse
If this many people are running into this problem, maybe we can get a role call of whose using what method, if not stock ROM what custom they are using, and what carrier they us?
I'm stock ROM, Stock Recovery, and Tmobile US. I used Method C.
I'm wondering if they have changed the update in a way that is preventing some people from updating. like it detects a certain file before update or something idk. I'm not any sort of advanced android user so I am probably wrong, but it's the first thing that comes to mind. Otherwise, maybe they sent out a bad update file, but I feel like that probably wouldn't be the case since it's been happening for a couple days now.
Thought's ideas anyone, or am I alone in any of these thoughts?
Stock rom
mylegiscramped said:
If this many people are running into this problem, maybe we can get a role call of whose using what method, if not stock ROM what custom they are using, and what carrier they us?
I'm stock ROM, Stock Recovery, and Tmobile US. I used Method C.
I'm wondering if they have changed the update in a way that is preventing some people from updating. like it detects a certain file before update or something idk. I'm not any sort of advanced android user so I am probably wrong, but it's the first thing that comes to mind. Otherwise, maybe they sent out a bad update file, but I feel like that probably wouldn't be the case since it's been happening for a couple days now.
Thought's ideas anyone, or am I alone in any of these thoughts?
Click to expand...
Click to collapse
skidmarc11 said:
Im getting the same thing. Even after flashing "stock recovery" that i got from the modaco link, I can't update or even go into the stock recovery...I would absolutely love to enjoy the update too!
Click to expand...
Click to collapse
Yes i agree about the file detection. I'm running stock rom but i think i've just realised my problem. Although i have a stock rom my problem is that the stock rom i'm running is deodexed. I read somewhere that if the stock rom is tweaked in any way or if any bloatware is deleted you can't get OTA updates.
Hope this helped
Wouldn't an RUU fix any of those problems?
Yes it would
Sent from my HTC One S using xda app-developers app

Manual boot only after clockwork flash fail

Alright, so here's the issue. I tried to flash a version of CW onto my HDMaxx (XT926) and it failed, saying the file size was incorrect. Now, whenever I boot, it goes to the same recovery screen and says that the flash failed, even when I don't boot into recovery. After many failed attempts, I still cannot reflash the recovery. It still boots if I manually go into the bootloader and just select normal bootup, but as you can imagine, it gets pretty old having to do that. I just installed OTA JB yesterday, and it worked fine (after manually installing the zip myself) but the same problem still occurs on boot. Any help? Thanks in advance.
Action123 said:
Alright, so here's the issue. I tried to flash a version of CW onto my HDMaxx (XT926) and it failed, saying the file size was incorrect. Now, whenever I boot, it goes to the same recovery screen and says that the flash failed, even when I don't boot into recovery. After many failed attempts, I still cannot reflash the recovery. It still boots if I manually go into the bootloader and just select normal bootup, but as you can imagine, it gets pretty old having to do that. I just installed OTA JB yesterday, and it worked fine (after manually installing the zip myself) but the same problem still occurs on boot. Any help? Thanks in advance.
Click to expand...
Click to collapse
Reflash stock firmware. Check the stock firmware thread for your device in development subforum.
Its usually a good idea to flash to stock before upgrading os anyway.
Action123 said:
Alright, so here's the issue. I tried to flash a version of CW onto my HDMaxx (XT926) and it failed, saying the file size was incorrect. Now, whenever I boot, it goes to the same recovery screen and says that the flash failed, even when I don't boot into recovery. After many failed attempts, I still cannot reflash the recovery. It still boots if I manually go into the bootloader and just select normal bootup, but as you can imagine, it gets pretty old having to do that. I just installed OTA JB yesterday, and it worked fine (after manually installing the zip myself) but the same problem still occurs on boot. Any help? Thanks in advance.
Click to expand...
Click to collapse
you said HDMaxx? do you have a retail verizon razr hd? because clockwork is only for developer devices unlocked. and im pretty sure they dont have a developer Maxx HD
You need to successfully flash any of your partitions with a signed image in fast boot. Pick a small and relatively minor one like device tree.
The bootup error you are seeing means that an unsigned image was attempted to be flashed on a locked boot loader device and should go away once any properly signed image is flashed again afterwards. You could just flash the stock recovery image from the full XML fast boot file too.
The device should boot normally again thereafter.
zooyork0721 said:
you said HDMaxx? do you have a retail verizon razr hd? because clockwork is only for developer devices unlocked. and im pretty sure they dont have a developer Maxx HD
Click to expand...
Click to collapse
cellzealot said:
You need to successfully flash any of your partitions with a signed image in fast boot. Pick a small and relatively minor one like device tree.
The bootup error you are seeing means that an unsigned image was attempted to be flashed on a locked boot loader device and should go away once any properly signed image is flashed again afterwards. You could just flash the stock recovery image from the full XML fast boot file too.
The device should boot normally again thereafter.
Click to expand...
Click to collapse
No, It is an HDMaxx. It has the version XT926, but it is stock Verizon. Does anyone have any knowledge of a thread with an instructional for unlocking my bootloader and a clockwork/Amon Ra/etc. flash? I'm just struggling to find anything. Almost seems like very few people are working with my device as of this moment.
Action123 said:
No, It is an HDMaxx. It has the version XT926, but it is stock Verizon. Does anyone have any knowledge of a thread with an instructional for unlocking my bootloader and a clockwork/Amon Ra/etc. flash? I'm just struggling to find anything. Almost seems like very few people are working with my device as of this moment.
Click to expand...
Click to collapse
Verizon branded XT926 are bootloader locked, period. Verizon insisted it be that way. Since the HD Maxx doesn't have a developer's edition (which you can unlock the bootloader on), you are limited to hacks/workarounds that use a signed kernel to load a custom one. Check the Developers forum for hack posts.
EdwardN said:
Verizon branded XT926 are bootloader locked, period. Verizon insisted it be that way. Since the HD Maxx doesn't have a developer's edition (which you can unlock the bootloader on), you are limited to hacks/workarounds that use a signed kernel to load a custom one. Check the Developers forum for hack posts.
Click to expand...
Click to collapse
Thank you sir.
Action123 said:
No, It is an HDMaxx. It has the version XT926, but it is stock Verizon. Does anyone have any knowledge of a thread with an instructional for unlocking my bootloader and a clockwork/Amon Ra/etc. flash? I'm just struggling to find anything. Almost seems like very few people are working with my device as of this moment.
Click to expand...
Click to collapse
Google safe strap for this device. We don't have clockwork on the consumer version but we do have safestrap which uses TWRP recovery. I use that to flash stuff. It's actually better because you leave your stock rom on the safe side and flash on the other partition and don't have to worry about bricking anything.
Sent from my DROID RAZR HD using xda premium
clouse2013 said:
Google safe strap for this device. We don't have clockwork on the consumer version but we do have safestrap which uses TWRP recovery. I use that to flash stuff. It's actually better because you leave your stock rom on the safe side and flash on the other partition and don't have to worry about bricking anything.
Sent from my DROID RAZR HD using xda premium
Click to expand...
Click to collapse
I did read up on TWRP a while ago. It kinda looked like a pain to me. I don't know, but I just want to be able to boot straight into my ROM of choice immediately without having to go through a bootloader (for someone other than myself, not in the knowing of what they're doing ICE). I used to have an N1 running CM7 and it was just what I wanted. Are there any downfalls of using this method that you have seen?

HTC One SV Revert to Stock Help (for update)

Hi All,
Of course the first thing I did after getting my new HTC One SV is root it and install LBE privacy protection to stop data leakage. However recently ive been getting a notification of an update to jelly bean through my phone provider (Vodafone Australia). However this will not install due to custom recovery image so the pre-install check fails. I cannot find stock recovery images anywhere and even if I did, due to presence of clockwork mod cant push images via Android SDK (skips straight past hboot to clockworkmod so isn't detected as an available device).
Can anyone help me get my phone back in a state where I can install the new update and the re-root?
Am not 100% noob, am familiar with custom roms and basics required to root and use SDK, this is my 3rd android device ive played with so hopefully this question is not tooooo SIGH.
Seems like HTC one SV is too new to have its on page in XDA support?
Try find here something or sombody who can help. http://forum.xda-developers.com/showthread.php?t=2292432
Wysłane z mojego HTC One SV
Not helpful
marceli-szpak said:
Try find here something or sombody who can help. http://forum.xda-developers.com/showthread.php?t=2292432
Wysłane z mojego HTC One SV
Click to expand...
Click to collapse
Hi there,
Unfortunately I don't have permission to post messages in that thread, nor does it seem the appropriate place to ask my question as it is an area for resources not help.
You must have 10 posts to write in some threads. Try ask in thread root for One sv. Have you bootloader unlocked ? What is your hboot number? For now when you update to JB via OTA you can't make s-off and next you can't back to previous hboot version.
Wysłane z mojego HTC One SV
RE HTC One SV Revert to Stock Help (for update)
marceli-szpak said:
You must have 10 posts to write in some threads. Try ask in thread root for One sv. Have you bootloader unlocked ? What is your hboot number? For now when you update to JB via OTA you can't make s-off and next you can't back to previous hboot version.
Wysłane z mojego HTC One SV
Click to expand...
Click to collapse
Yes bootloader is unlocked, I have clockworkmod working, in fact I think that is the problem. If I could get back to original recovery image I think the OTA would work
HBOOT number is 1.01.000
snorglamp said:
Yes bootloader is unlocked, I have clockworkmod working, in fact I think that is the problem. If I could get back to original recovery image I think the OTA would work
HBOOT number is 1.01.000
Click to expand...
Click to collapse
What you have to do is, download the OTA Update (will be located to sdcard/download/), copy to pc and unzip it. You will find another firmware.zip, there is the jelly bean recovery inside. Flash this JB recovery over fastboot.
Boot.img/Kernel also have to be stock and maybe bootloader also locked (for this i'm not sure), then you should be able to install JB.
But think about, if you need S-Off, cause you only get this on ICS.
old.splatterhand said:
What you have to do is, download the OTA Update (will be located to sdcard/download/), copy to pc and unzip it. You will find another firmware.zip, there is the jelly bean recovery inside. Flash this JB recovery over fastboot.
Boot.img/Kernel also have to be stock and maybe bootloader also locked (for this i'm not sure), then you should be able to install JB.
But think about, if you need S-Off, cause you only get this on ICS.
Click to expand...
Click to collapse
Thanks this sounds like the best advice I have had yet. MANY THANKS SIR!
However at the moment I have problems getting ADB/fastboot to recognise the phone is connected (using command line). Just says waiting for device and nothing happens. Is this because I have clockworkmod installed? I just got a new PC and installed latest ADB/SDK and latest HTC sync software so everything should be latest. I cant do much if I cant give commands unfortunately. If I solve this I will post an update.
snorglamp said:
Thanks this sounds like the best advice I have had yet. MANY THANKS SIR!
However at the moment I have problems getting ADB/fastboot to recognise the phone is connected (using command line). Just says waiting for device and nothing happens. Is this because I have clockworkmod installed? I just got a new PC and installed latest ADB/SDK and latest HTC sync software so everything should be latest. I cant do much if I cant give commands unfortunately. If I solve this I will post an update.
Click to expand...
Click to collapse
Can be related to cwm! Look into my index thread, there is a link to cwm with working adb or use TWRP2.5.
Good luck.
?????????????*
ismailnayir said:
?????????????*
Click to expand...
Click to collapse
If's there anything you don't understand, ASK!
So nobody knows, what you want, sorry.
old.splatterhand said:
Can be related to cwm! Look into my index thread, there is a link to cwm with working adb or use TWRP2.5.
Good luck.
Click to expand...
Click to collapse
Yes I thought that might be the case but was not having any luck with search results to find out what to do. Thank the internet gods for you! Going to your thread now XD!
I had similar issue with an update, the reason is that the stock recovery has some commands that neither cwm nor twrp have.
Here's what I did to fix it and update succesfully:
- extracted recovery.img from the update itself
- put it in the same directory as fastboot program
- attached the device with debug usb mode on on the pc
- command 'adb reboot bootloader'
- when the device rebooted in fastboot: 'fastboot flash recovery recovery.img'
- after that I was able to update without problems
note that you need to flash back twrp or cwm if you want root.
Of course you need unlocked bootloader, android-sdk's platform tools and adb drivers to do this, but you should already have them if you flashed cwm
good luck!
madpausa said:
I had similar issue with an update, the reason is that the stock recovery has some commands that neither cwm nor twrp have.
Here's what I did to fix it and update succesfully:
- extracted recovery.img from the update itself
- put it in the same directory as fastboot program
- attached the device with debug usb mode on on the pc
- command 'adb reboot bootloader'
- when the device rebooted in fastboot: 'fastboot flash recovery recovery.img'
- after that I was able to update without problems
note that you need to flash back twrp or cwm if you want root.
Of course you need unlocked bootloader, android-sdk's platform tools and adb drivers to do this, but you should already have them if you flashed cwm
good luck!
Click to expand...
Click to collapse
DUDE! THATS TOTALLY WHAT I WANNA HEAR, however, ive been having enormous trouble getting fastbood/ADB to recognise the phone is attached, I have tried the universal clockwork mod ADB driver which didnt work, and I havent had any luck folloing the instructions on Splatterhand's other threads in getting it recognised. The command fastboot devices just leaves a flashing cursor FOREVER! Other commands leave the message "waiting for device". According to splatterhand ADB/Fastboot wont recognise the phone as attached because of clockworkmod and therefore I cant push any commands or files...how did you solve this?
OMG
'adb reboot bootloader'
THATS THE MISSING PIECE OF THE PUZZLE!!!! THAT TOTALLY WORKED AND GOT ME TO FASTBOOT ON THE PHONE!
Because the phone wasnt booting into booloader (CWM instead) I just assumed the same would happen if I used that command from adb but no, it totally worked....i wonder if the CWM universal driver i installed had anything to do with that...
anyway, CHAMPION YOU!
Good tip on extracting the recovery from the OTA itself, will do, and I will try to get a copy to Old.Splatterhand for other vodafone Australia users so they have the OTA and recovery at hand.
Will report back if I have full success to confirm your steps!
snorglamp said:
'adb reboot bootloader'
THATS THE MISSING PIECE OF THE PUZZLE!!!! THAT TOTALLY WORKED AND GOT ME TO FASTBOOT ON THE PHONE!
Because the phone wasnt booting into booloader (CWM instead) I just assumed the same would happen if I used that command from adb but no, it totally worked....i wonder if the CWM universal driver i installed had anything to do with that...
anyway, CHAMPION YOU!
Good tip on extracting the recovery from the OTA itself, will do, and I will try to get a copy to Old.Splatterhead for other vodafone Australia users so they have the OTA and recovery at hand.
Will report back if I have full success to confirm your steps!
Click to expand...
Click to collapse
Just a thought, if you're upgrading from ics to jb, I think you should use ics recovery (I guess you can grab it from another ruu)... anyway, glad to be of any help
madpausa said:
Just a thought, if you're upgrading from ics to jb, I think you should use ics recovery (I guess you can grab it from another ruu)... anyway, glad to be of any help
Click to expand...
Click to collapse
So I took your advice and pulled a recovery image from the ICS Cricket (using the link in splatterhand's thread to stock resources) image. Downloaded the OTA and went to apply it, got past boot/recovery screen checks and all was looking good until i got to a screen with what looked to be an SD card icon and a loading bar under a larger phone icon with a green recycle type circle over it. That loading bar stopped about half way with a red triangle and exclamation mark (i.e. during the update process). Fortunately not bricked. It may be that I need the original Vodafone AU recovery image, or that there was something about the ICS OTA image that I used that made it fail. Not sure. Will try to find another stock recovery image.
Applied recovery from EU RUU stock and while that went fine and can boot into htboot no problem, when applying the OTA update it skips the fastboot and gets stuck on HTC One screen like normal loading except stuck.
I think I will try old.splatterhand's recommendation now that I am able to push things to the phone through adb/fastboot, so thanks for your commandline tip but now I must try flashing the JB recovery etc as outlined in his post.
The problem may be that the OTA is expecting a vodafone australia stock recovery as i seem to be getting different outcomes depending on which stock recovery image I apply...
I have sent Old.Splatterhand the Vodafone Australia JB OTA file for the main thread collection in case anyone wants it or the images therein, but at the moment it is of little use to me hehe.
SUCCESS! How to update to Jelly Bean from modded/rooted HTC One SV ICS
Ok so I should probably post this somewhere else so old.splatterhand can just post the summary. But here is what happened and a combination of your advice helped me so super thanks to both of you (madpausa and old.splatterhand)!
So I was in a situation where having rooted my stock HTC One SV and flashed clockworkmod I couldnt apply the Jellybean update that was constantly in my notifications bar (referred to as OTA update). When I tried to reboot into recovery clockworkmod would take over instantly and I was unable to run commands from fastboot command lines.
I was however able to download the update which could be found in (internal memory) "Downloads" folder "OTA_K2_UL_JB...zip".
In order to apply the advice of madpausa I had to first revert to stock recovery image before applying the recovery image from the OTA. So I got a stock recovery image from the cricket version (see old.splatterhand's thread) and flashed that first.
- put it in the same directory as fastboot program
- attached the device with debug usb mode on on the pc (select HTC Sync) and fire up the CMD interface for command line time (cd Android)
- command 'adb reboot bootloader' which actually did boot the phone into Hboot and not clockworkmod, so that solved the ADB/fastboot issue for me
- when the device rebooted in fastboot: 'fastboot flash recovery recovery.img'
Once I had reverted to stock recovery I was then able to apply the rest of madpausa and old.splatterhand's advice
What finally worked for me was copying that OTA JB update zip to pc my and unzipping it. Inside there was firmware.zip, which also needed to be unzipped and inside is the jelly bean version recovery.img.
- put it in the same directory as fastboot program (and remove the other recovery.img or overwrite)
- attached the device with debug usb mode on on the pc
- command 'adb reboot bootloader'
- when the device rebooted in fastboot: 'fastboot flash recovery recovery.img'
Then when I booted up my phone again it asked me if wanted to download and install the update, which I did. The phone rebooted, update applied, all good!
Hboot did not have to be re-locked, so dont go as far as locking your phone again.
Thanks to everyone's help for this one, I am now a happy use of Jellybean on my previously modded HTC One SV...now to get superuser back and stock that data leakage with LBE again!!!
Good to see you got your problem sorted out!:highfive:
And the download of OTA was succesful, thanks!:good:
snorglamp said:
Ok so I should probably post this somewhere else so old.splatterhand can just post the summary. But here is what happened and a combination of your advice helped me so super thanks to both of you (madpausa and old.splatterhand)!
So I was in a situation where having rooted my stock HTC One SV and flashed clockworkmod I couldnt apply the Jellybean update that was constantly in my notifications bar (referred to as OTA update). When I tried to reboot into recovery clockworkmod would take over instantly and I was unable to run commands from fastboot command lines.
I was however able to download the update which could be found in (internal memory) "Downloads" folder "OTA_K2_UL_JB...zip".
In order to apply the advice of madpausa I had to first revert to stock recovery image before applying the recovery image from the OTA. So I got a stock recovery image from the cricket version (see old.splatterhand's thread) and flashed that first.
- put it in the same directory as fastboot program
- attached the device with debug usb mode on on the pc (select HTC Sync) and fire up the CMD interface for command line time (cd Android)
- command 'adb reboot bootloader' which actually did boot the phone into Hboot and not clockworkmod, so that solved the ADB/fastboot issue for me
- when the device rebooted in fastboot: 'fastboot flash recovery recovery.img'
Once I had reverted to stock recovery I was then able to apply the rest of madpausa and old.splatterhand's advice
What finally worked for me was copying that OTA JB update zip to pc my and unzipping it. Inside there was firmware.zip, which also needed to be unzipped and inside is the jelly bean version recovery.img.
- put it in the same directory as fastboot program (and remove the other recovery.img or overwrite)
- attached the device with debug usb mode on on the pc
- command 'adb reboot bootloader'
- when the device rebooted in fastboot: 'fastboot flash recovery recovery.img'
Then when I booted up my phone again it asked me if wanted to download and install the update, which I did. The phone rebooted, update applied, all good!
Hboot did not have to be re-locked, so dont go as far as locking your phone again.
Thanks to everyone's help for this one, I am now a happy use of Jellybean on my previously modded HTC One SV...now to get superuser back and stock that data leakage with LBE again!!!
Click to expand...
Click to collapse
This is the exact problem I had. I started trying to root my HTC One SV (Boost Mobile) a couple of months ago. I got past the HTC unlock bootloader, but I got confused by the rest of the rooting guide, so eventually I gave up on finishing the rooting process. Ever since then, it has said ***TAMPERED*** in hboot when I go in there. Well, just like you, I started getting the JB update notification in the OTA. I tried to install it like 15 times, but it always just rebooted into the existing image I had, which was the stock image.
So today I decided to try and finish the root and then find a JB ROM to install. old.splatterhand helped me out with getting it rooted, and it was a success. But when I asked him about JB ROMs, he said I had to have S-off. When we spoke a little more about it, he pointed me here, telling me that he helped you get the root back after you got through the OTA update.
So now, I guess I need to try and follow your instructions on getting the OTA update, and then go back to the thread where he helped you get the root back.
I'm a complete n00b to rooting android devices, but I'm pretty confident that I can do this with the proper guidance. I have rooted 2 Samsung SCH-i500s and today I finally got this HTC One SV rooted. I'm starting to see how it all works.
If you don't mind, let me know of any details of issues you faced that may not be in the guides you followed. That would be a great help.
Congrats on getting yours all done.
Thanks.
---------- Post added at 07:32 PM ---------- Previous post was at 07:15 PM ----------
snorglamp said:
'adb reboot bootloader'
THATS THE MISSING PIECE OF THE PUZZLE!!!! THAT TOTALLY WORKED AND GOT ME TO FASTBOOT ON THE PHONE!
Because the phone wasnt booting into booloader (CWM instead) I just assumed the same would happen if I used that command from adb but no, it totally worked....i wonder if the CWM universal driver i installed had anything to do with that...
anyway, CHAMPION YOU!
Good tip on extracting the recovery from the OTA itself, will do, and I will try to get a copy to Old.Splatterhand for other vodafone Australia users so they have the OTA and recovery at hand.
Will report back if I have full success to confirm your steps!
Click to expand...
Click to collapse
Do you type "adb reboot bootloader" in the command line? I wanna be clear on this before I make any moves.

Categories

Resources