Database Info

o3d goes into recovery mode every time it boots

Hi guys, i'm in desperate need of your help. i think my precious o3d might have been screwed.
first let me tell you what i did. as you know the internal sd card of o3d is 5gb or so and it fills up very quickly. this internal sd card is mounted as /sdcard. i have a class 10 16gb micro sd card and when i insert it, its automatically mounted as /sdcard/_ExternalSD. The applications or games, especially the ones that have external data folders which are like 1gb in size insists to be installed on /sdcard. You can't move those data folders to _ExternalSD, because then the apps doesn't work.
Then i came across this topic:
http://forum.xda-developers.com/showthread.php?t=1189701
As you can see that was exactly what i needed. I had CWM 5.0.2.0 installed so i downloaded the first .zip then copied all of the files and folders excluding the _ExternalSD folder to the external sd card then rebooted into recovery. From there i flashed the zip and rebooted again. phone booted up and all was ok and it worked. now the phone sees the external sd card as the internal one and the internal sd card was mounted as /sdcard/_ExternalSD. I then formatted the internal sd card from the settings menu because i already copied all of the stuff there to the external card. It worked fine and the internal card is formatted. After that i decided to get a nandroid backup so i opened the rom toolbox program. From the menus i selected the backup option, gave it a name, clicked ok. the phone rebooted into cwm recovery screen but nothing happened. then i noticed something was not right because there was some error lines under the cwm menus saying "E:can't mount CACHE:recovery/command" etc. Then i selected the reboot phone option but the phone rebooted right back into the CWM recovery again!! At that point i knew that i was @#?^ed.
Anyways i researched a lot and came across this thread:
http://forum.xda-developers.com/showthread.php?t=1156549
i did exactly what he said and it worked, i mean it flashed nicely. then i rebooted the phone but it booted into the recovery again!!! But this time the CWM recovery was gone and i believe this is the stock recovery screen. I can browse the menu of it and make selections but the phone boots into the recovery every time it reboots.
The recovery screen looks like this:
http://farm8.staticflickr.com/7010/6654644033_b616bc0635_z.jpg
Then i flashed the phone to the latest official firmware V21A_00, it flashed nicely but it still boots right into the recovery everytime.
Then i installed the Android SDK and tried to push the original vold.fstab file to the system using the adb command line tool but it doesn't see the phone. I think adb works only when the system boots up normally, not in the recovery mode.
I don't know if there's a way to install the CWM from the stock recovery somehow. If you know how, please tell. The CWM has more options.
I don't know what else i can do. It started to look ridiculous. If there are any experts cool enough to help please do so. I'll be waiting. Thank you...
Edit:
I also tried this:
http://forum.xda-developers.com/show....php?t=1244490
I starts just fine but get's stuck on the "RESET" command, after a while it gives "DOWNLOAD FAIL!" error. I think the phone is supposed to restart automatically but it doesn't. Manually resetting the phone doesn't work either.
I'm about to pull my hair out...
Edit 2:
I also posted on the official LG Mobile forum here:
http://www.lgforum.com/forum/boards...d-goes-into-recovery-mode-every-time-it-boots
Fingers crossed

Quite a post!
From all your post there is no mention that you formated and did a factory reset after 21a flash.
Can you please try that if you haven't?
Sent from my LG-P920 using xda premium

thank you for the reply!
i tried all 4 wipe options on the recovery screen then rebooted. it's the same, i'm back at the good old recovery again

Did you try with the external sd card out?
This is strange, usually a kdz flash coupled with a format fixes the problem.
Some how it still can't find the internal SD card.
I don't have further recommendations. Sorry
Sent from my LG-P920 using xda premium

yes i tried with the external sd card out. it didn't work..

vpamir said:
yes i tried with the external sd card out. it didn't work..
Click to expand...
Click to collapse
Hopefully someone else on this forum can suggest a way for you to unbrick.
your problem is although you have reset your phone, somehow it can't find a partition to boot from.
or
somehow the KDZ flashing is not totally successful.
good luck

If only there could be a way to be able to use the adb command from the Android SDK then i might be able to restore the vold.fstab file to its original, if the problem is that at all. Maybe then it'll work. To be able to flash the CWM Recovery again somehow might be a good thing too because it has more options like flashing .zip format roms but i have no idea how. Does anyone know if the stock recovery can flash some specifically named file to the system, does it have that kind of functionality? I'm desperate, please share your thoughts.

.............anyone?

I am sorry to say that but there is no solution for this problem yet. I have done the exact thing that you do and tried every single solution with no luck. The only way is to send it to lg repair service. My solution was to replace the mainboard.
Dostum gecmis olsun malesef tek cozum yolu anakarti degistirmek. Uzaman sayilirim android konusunda bosuna ugrasmayasin diye soyluyorum. LG servisi bile anca anakarti degistirerek cozum sunabildi. Temel problem internal karti formatlamis olman. Partititon table'i bozuyor bu islem malesef ve bu yuzden hicbir yontem ise yaramiyor.
Gecmis olsun tekrar...

so you say that the main problem was to format the internal sd card? well if formatting the internal sd card bricks the phone then why the hell is there an option to format it in the settings menu?

well if you didn't apply the swap fix, it wouldn't be a problem to format. When you swap the sd cards and format, it is the problem.

crime_of_heart said:
well if you didn't apply the swap fix, it wouldn't be a problem to format. When you swap the sd cards and format, it is the problem.
Click to expand...
Click to collapse
so you did exactly the same thing as me right? i mean you applied the swap fix then formatted the internal sd?
replacing the motherboard to fix this seems to be a bit nonsense to me to be honest. what does the partition table have anything to do with the motherboard?
if only there would be a .kdz format custom rom which factory resets the internal sd card during the flash process and maybe fixes the bootloader somehow, that might be the solution.

yes i did the same and the only solution was to replace the motherboard. we need a sowftware that can reach to the emmc in low-level. like omap flasher. but we also need the correct drivers which doesn't exist yet.

crime_of_heart said:
yes i did the same and the only solution was to replace the motherboard. we need a software that can reach to the emmc in low-level. like omap flasher. but we also need the correct drivers which doesn't exist yet.
Click to expand...
Click to collapse
i don't know what the emmc is, i need to do research on that. but i still think that replacing the motherboard won't solve this issue because it seems non relevant to me. i messed up with the vold.fstab file. but after that it worked fine. i mean the internal and external cards swapped just fine. only after i decided to make a nandroid backup using rom toolbox all hell broke loose. i plan to wait a couple of days before turning the phone to LG service. i believe someone will come up with an idea.
yardım etmeye çalıştığın için teşekkür ederim bu arada

Well, there´s a new recovery for the O3D, v5.0.2.7 (I got it with ROM Manager).
It fixes 2 bugs of the previous (5.0.2.0) version: now the USB mass storage option in the mounts menu works (mount external SDCARD), and we can use ADB while in recovery. That way we can fix stuff in the phone filesystem while in recovery: we can now use ADB shell, or ADB push to replace files.
The problem is that I don´t know how to flash it to the phone while in the stock recovery. If someone can guide me on creating a signed ZIP containing this new recovery, flashable in the stock recovery, I would be glad to do that and post it here. I think these phones of you guys can be fixed using this method!

Marcovecchio said:
Well, there´s a new recovery for the O3D, v5.0.2.7 (I got it with ROM Manager).
It fixes 2 bugs of the previous (5.0.2.0) version: now the USB mass storage option in the mounts menu works (mount external SDCARD), and we can use ADB while in recovery. That way we can fix stuff in the phone filesystem while in recovery: we can now use ADB shell, or ADB push to replace files.
The problem is that I don´t know how to flash it to the phone while in the stock recovery. If someone can guide me on creating a signed ZIP containing this new recovery, flashable in the stock recovery, I would be glad to do that and post it here. I think these phones of you guys can be fixed using this method!
Click to expand...
Click to collapse
Great news! But now i need to find a way to install the new CWM. Just as you said i believe what i need is to find or make a .kdz update which includes this new CWM.
What do you think?

I know this is possible, at least for the Galaxy Ace: I have a ZIP file for this device with a custom recovery image, flashable in stock recovery!
To make one for the Optimus 3D, I need to know the following:
- How can I obtain the .IMG of the new recovery? I have found some temp files in clockworkmod folder in my sdcard. The creation date of one of them matches the exact moment I upgraded my recovery, and the file size also matches a recovery image: 5.54MB. Is it the recovery image? Can I just rename it to recovery.img? How can I extract it to ensure it´s ok?
- After I get the recovery image, I can use the Galaxy Ace ZIP as the base to build the O3D zip file. Any help on what do I have to change to make it work correctly?

I also tried this:
http://forum.xda-developers.com/showthread.php?t=1244490
I starts just fine but get's stuck on the "RESET" command, after a while it gives "DOWNLOAD FAIL!" error. I think the phone is supposed to restart automatically but it doesn't. Manually resetting the phone doesn't work either.
I'm about to pull my hair out...
Edit: I'm 99% sure that this isn't a hardware related problem. And LG's software not being able to turn the phone to stock is totally [email protected]#$%!

On some "unbrick your optimus 3d" threads i came across this image:
http://attachments.xda-developers.com/attachment.php?attachmentid=667470&d=1311752328
i tried all methods around here but not once i came across a screen like it. weird...

well i give up guys. so much technical [email protected] going on and no one seems to understand this device enough. i'll turn it to the LG Repair Service today. Thank you everyone for your help...

Can't Mount SD Card in ClockWorkMod Recovery

So ive been at this for 2 days. I finally got the micro sd card with both files to install rom but in clockworkmod recovery i cant mount sd card nor format or anything. I can mount and unmount in the normal settings of the device and see it in root explorer but thats it. Its formatted to fat32. also on rom manager where it says to install from sdcard it only takes u to the internal sdcard which makes no sense because i was told u cant install a rom from the internal sdcard.
PS. This is my first Android Device!!!!

yeah
I am in the exact same situation. I am rooted on 4.0.3 and I wanted to install 4.0.4 or one of the custom ROM's. This is not my first android device but I am at a loss. I can not enter fastboot, can't load anything from the SD card in CWM recovery (get the message E:Can't mount /sdcard/), can not connect via ADB on my PC.
I feel that I have enough skill to do all of this because I have done it in the past. My ADB works fine with my Galaxy Nexus (just updated that and installed new kernel) so I don't know what is causing the problem. I have tried different SD cards(3) as well and nothing.
The biggest problem is I can not get into fastboot and SBF if I wanted to. I have been having issues with drivers even though I have installed motohelper like 6 million times.
I have tried factory resets and wipes and everything. I tried to do the factory update that is being pushed to me and I get an error. Any help would be greatly appreciated.
Sorry if this is stealing your thread but I think we are having the same problems.

check out my thread at xoomforums:
I PM'd it to u cus it dont let me put it here
Read all 3 pages. I think it will help u. posted same question there and a guy suggested to install the rogue cwm 1.5 recory via adb fastboot or whatever. he says that will read your sdcards. if i were u id try and fastboot on a different pc cus it looks like thats what we both have to do unfortunately. it looks like a pain!!! u have a xoom?

anyone figured out how to sort this?? really frustrating it just sayin E:can't mount sd card.. any help will be appreciated!!

platt said:
anyone figured out how to sort this?? really frustrating it just sayin E:can't mount sd card.. any help will be appreciated!!
Click to expand...
Click to collapse
If you are using CWM recovery from Rom Manager (not recommended for Xoom) it does only read your internal flash memory (called sdcard) but not your external microsd card (called external1???). So you need to flash a different custom recovery using adb/fastboot to flash a recovery.image file or, if you can flash through cwm (from internal sdcard) a recovery.zip file (either EOS or Rogue, depending on the ROM you will flash afterwards), Actually, any custom recovery is supposed to work for any rom, but in reality Eos works best for Eos and Rogue works best for the CM9 Kang.
Please, just remember, never flash a .zip file through fastboot, only an .image file!

+1 i agree with the above, fixed this last night. I download a couple recovery images, which were blank for some reason, so i downloaded the zips and extracted the recovery image folder. Then opened the command window from the folder with the recovery image and flashed it with fastboot. Now it works perfect.
Sent from my MB855 using xda premium

Fastboot
I had to use fastboot to flash an entire stock config when I got stuck in this loop.

TheAv8tor said:
I had to use fastboot to flash an entire stock config when I got stuck in this loop.
Click to expand...
Click to collapse
Atleast you got it out, mines been acting up since i flashed cm9. I think i might have to do that
Sent from my MB855 using xda premium

okantomi said:
If you are using CWM recovery from Rom Manager (not recommended for Xoom) it does only read your internal flash memory (called sdcard) but not your external microsd card (called external1???). So you need to flash a different custom recovery using adb/fastboot to flash a recovery.image file or, if you can flash through cwm (from internal sdcard) a recovery.zip file (either EOS or Rogue, depending on the ROM you will flash afterwards), Actually, any custom recovery is supposed to work for any rom, but in reality Eos works best for Eos and Rogue works best for the CM9 Kang.
Please, just remember, never flash a .zip file through fastboot, only an .image file!
Click to expand...
Click to collapse
Thanks for saving the last half of my hair which I hadn't pulled out yet.
Got the backup on SD ONLY after flashing the EOS recovery 1.5.0 (i tried the latest to begin with, did not work, made it worse flashing recovery from ROM Mgr)
http://www.xoomforums.com/forum/mot...ing-flashing-unrooting-under-one-roof-59.html has this particular recovery listed.
I still cannot boot in recovery using power+volUP...i have to get at least adb running. Any suggestion would be golden.

error mounting /internal_sdcard!
error mounting /internal_sdcard! pls help me it got stuck in boot loop tried to wipe cache and user data bt cwm says error mounting /internal_sdcard!

Ipse_Tase said:
Thanks for saving the last half of my hair which I hadn't pulled out yet.
Got the backup on SD ONLY after flashing the EOS recovery 1.5.0 (i tried the latest to begin with, did not work, made it worse flashing recovery from ROM Mgr)
http://www.xoomforums.com/forum/mot...ing-flashing-unrooting-under-one-roof-59.html has this particular recovery listed.
I still cannot boot in recovery using power+volUP...i have to get at least adb running. Any suggestion would be golden.
Click to expand...
Click to collapse
Delete any zip files or IMG files from sdcard and reboot it this helped me ............ Hit thanks if helped
Sent from my HTC Desire C using XDA Premium 4 mobile app

This is my first attempt at unlocking and rooting. So far I did manage to get unlocked. Now I am stuck at: Can't mount/sdcard . . . . .
I have been following the thread: [HOW] Rookie Rooting, Flashing And UnRooting Under One Roof
It seems to be layed out quite well and well, I'd never have gotten this far if it weren't for following those directions. I'm not discouraged because I know this is just a stumbling block. I can't wait to kill the bloatware and see if I can O/C this beast just a little.
Good luck to the folks who posted above me. I will post my results here.
Mike P.

I think the solution is much more simple...
The recovery uses normally e: an external sd card , you just trying by d: internal sd card , so take another sd card and dun let it be internal sd card...
And the recovery back on working with you

[Q] Cannot flash CM on 3100

Hi everyone,
I have a Galaxy Tab 2 7.0 (P3100) and I have rooted it and installed CWM so I could install the latest CM release. But when I try to install the CM zip file, it says "some symlinks failed". Now my tablet won't boot, the splash screen with "Samsung Galaxy Tab 2" keeps on forever. But I still have access to CWM and the Download mode so I think everything's not lost yet
Here are the exact steps I did:
- Uploaded the CM image (cm-10-20121213-NIGHTLY-p3100.zip), the gapps zip and the root zip to the tablet.
- Installed heimdall on my computer, with the correct drivers.
- Flashed CWM on the tablet.
- Installed the root zip on the tablet using CWM.
- Booted the tablet again just to make sure rooting was enabled (yes, it was).
- Opened CWM again, wiped data, wiped cache.
- Installed CM image:
--- Error: some symlinks failed (status 7)
- Installed the gapps zip file (worked)
- Formatted /system
- Installed CM image:
--- Same error: some symlinks failed (status 7)
I wanted to try another CM images, maybe that one is broken, I don't know, but now I cannot upload more files to the tabled internal SD card. I can't mount it anymore on my computer because the tablet won't boot. I tried using an external SD card (from another Android phone I have) but CWM says "Cannot mount /external_sd" when I try to mount it.
Can anyone help me? I want to flash the latest CM on my tablet.
Thanks!

This seems to me like either a broken recovery or maybe a corrupt download. What version of CM are you trying to flash? Also, what version of CWM are you using and where did you find it?
Posted from my Fascinate using XDA Premium

Yeah, I also think the download was corrupt. I tried flashing cm-10-20121213-NIGHTLY-p3100.zip (the latest one on the day I flashed) and my CWM version is 6.0.1.1. I downloaded it from ClockworkMod official website, they say that is the latest version for my tablet model.
I believe CWM is working and that the image is corrupt, but I can't find a way to flash another CM image because I don't know how to put another file inside the tablet, or how to flash an image from my computer to the tablet. Can I use something like heimdall to flash a CM to my tablet? Can I upload an image to the tablet so I can use CWM to install it? "adb push" doesn't work, it doesn't detect my device in CWM mode. Do I need some working/stock Android image on the tablet so I can flash CM over? Or it will work no matter what's installed (given that the download is not corrupt)?
Thanks!

cristiandeives said:
Yeah, I also think the download was corrupt. I tried flashing cm-10-20121213-NIGHTLY-p3100.zip (the latest one on the day I flashed) and my CWM version is 6.0.1.1. I downloaded it from ClockworkMod official website, they say that is the latest version for my tablet model.
I believe CWM is working and that the image is corrupt, but I can't find a way to flash another CM image because I don't know how to put another file inside the tablet, or how to flash an image from my computer to the tablet. Can I use something like heimdall to flash a CM to my tablet? Can I upload an image to the tablet so I can use CWM to install it? "adb push" doesn't work, it doesn't detect my device in CWM mode. Do I need some working/stock Android image on the tablet so I can flash CM over? Or it will work no matter what's installed (given that the download is not corrupt)?
Thanks!
Click to expand...
Click to collapse
Please tell me you made a backup after rooting and before modding?
If you didn't (which it sounds like), BAD CRISTIAN!!! But this will make you learn to do it from now on, huh?
Which leaves you only two options, both include using a computer to get a ROM zip to the tab...
1- connect tab to computer in recovery with usb cable and download a new copy to SD card via computer.
2 - remove SD card from tab, place in computer card reader, and download a new copy to SD card via computer.

LeftyGR said:
Please tell me you made a backup after rooting and before modding?
If you didn't (which it sounds like), BAD CRISTIAN!!! But this will make you learn to do it from now on, huh?
Click to expand...
Click to collapse
I didn't make a backup :crying:
Yes, now I learnt, I will always make a backup from now on...
LeftyGR said:
1- connect tab to computer in recovery with usb cable and download a new copy to SD card via computer.
Click to expand...
Click to collapse
How exactly do I download a new copy of the image to the SD card? When I plug the tablet to the computer, I can't access its files. It used to show me the files when the Android system booted, but on Recovery mode it won't display them, the filesystem isn't mounted. Should I do anything special? Should I use another CWM version?
LeftyGR said:
2 - remove SD card from tab, place in computer card reader, and download a new copy to SD card via computer.
Click to expand...
Click to collapse
I tried that, but it seems I cannot mount the external SD card using CWM. When I hit "Mount external SD Card", it says "Cannot mount /external_sd". The SD card works fine though, I use it on another phone and on my computer... Is this a CWM problem? =/
Thanks!

cristiandeives said:
I didn't make a backup :crying:
Yes, now I learnt, I will always make a backup from now on...
Click to expand...
Click to collapse
Good man.
How exactly do I download a new copy of the image to the SD card? When I plug the tablet to the computer, I can't access its files. It used to show me the files when the Android system booted, but on Recovery mode it won't display them, the filesystem isn't mounted. Should I do anything special? Should I use another CWM version?
Click to expand...
Click to collapse
Pull the ext sd card out of the tab and put it into a card reader on a computer using the adapter the micro sd card [should have] come with.
I tried that, but it seems I cannot mount the external SD card using CWM. When I hit "Mount external SD Card", it says "Cannot mount /external_sd". The SD card works fine though, I use it on another phone and on my computer... Is this a CWM problem? =/
Click to expand...
Click to collapse
Possibly... However if you can mount your internal sd card, you should be able to place the zip on there. I don't usually suggest using internal, but if that's what you gotta do....

I found out why I couldn't mount my external SD card with CWM: I had to format it with FAT32! I don't know what filesystem there was before, the SD card I have was used by an old Éclair phone. I still couldn't install others CM 10 images (I really don't know why), but I managed to install CM 9 and the brand new CM 10.1.
Thanks, guys! =)

cristiandeives said:
I found out why I couldn't mount my external SD card with CWM: I had to format it with FAT32! I don't know what filesystem there was before, the SD card I have was used by an old Éclair phone. I still couldn't install others CM 10 images (I really don't know why), but I managed to install CM 9 and the brand new CM 10.1.
Thanks, guys! =)
Click to expand...
Click to collapse
Awsome. Thank you for providing your solution!!

Stuck with ICS in CWM and no USB.

Upon trying to update my TF101 device to Jelly Bean using this guide (wiki.cyanogenmod.org/index.php?title=Install_CM_for_tf101), at the 6th step of Installing CyanogenMod from recovery (i.e., Select install zip from sdcard) the tab says it's unable to mount the SD card.
The exact error is: E: unable to mount /sdcard/
I have CWM v6.0.1.3 installed.
Now, I'm stuck with a TF101 that isn't detectable via USB (or APX for that matter) running ClockWorkMod without root. What do I do? I'd like to upgrade to JellyBean but if that's an issue, I do not mind sticking with ICS.
Bear in mind that I'm completely new at this and I might need a step-by-step guide.
P.S. - I can't post links. Sorry.

If you boot to ICS and enable USB Debugging in Settings - Developer Options, is your device visible from the PC?
If yes, then I would try using PERI to root and install CWM.
If not, then I would try installing the Hybrid Touch 6.0.1.2 of this recovery: http://forum.xda-developers.com/showthread.php?t=1855686 Download the file in ICS, place it in the /sdcard/, flash from Recovery and see if it will let you. If you can see your microSD from recovery put it there. Then reboot and you should have a working recovery.
I have seen quite a few people try to use that wiki 6.0.1.3 and have no luck with mounting the /sdcard/

vigneshwerv said:
Upon trying to update my TF101 device to Jelly Bean using this guide (wiki.cyanogenmod.org/index.php?title=Install_CM_for_tf101), at the 6th step of Installing CyanogenMod from recovery (i.e., Select install zip from sdcard) the tab says it's unable to mount the SD card.
The exact error is: E: unable to mount /sdcard/
I have CWM v6.0.1.3 installed.
Now, I'm stuck with a TF101 that isn't detectable via USB (or APX for that matter) running ClockWorkMod without root. What do I do? I'd like to upgrade to JellyBean but if that's an issue, I do not mind sticking with ICS.
Bear in mind that I'm completely new at this and I might need a step-by-step guide.
P.S. - I can't post links. Sorry.
Click to expand...
Click to collapse
ok first mount usb
load your zip into internal sd card
unmount usb
factory reset from recovery
erase cache
erase dalvcache in advanced
install zip from internal sd card

frederuco said:
If you boot to ICS and enable USB Debugging in Settings - Developer Options, is your device visible from the PC?
If yes, then I would try using PERI to root and install CWM.
If not, then I would try installing the Hybrid Touch 6.0.1.2 of this recovery: http://forum.xda-developers.com/showthread.php?t=1855686 Download the file in ICS, place it in the /sdcard/, flash from Recovery and see if it will let you. If you can see your microSD from recovery put it there. Then reboot and you should have a working recovery.
I have seen quite a few people try to use that wiki 6.0.1.3 and have no luck with mounting the /sdcard/
Click to expand...
Click to collapse
No such luck. Still not able to mount the /sdcard/ and it doesn't seem to recognise the microSD as far as I can see.

Might be a bad USB cable. I have seen a few users (myself included) where my cable would charge, and be recognized by the PC but it would not do APX or ADB. New cable fixed it for me, and most others.

frederuco said:
Might be a bad USB cable. I have seen a few users (myself included) where my cable would charge, and be recognized by the PC but it would not do APX or ADB. New cable fixed it for me, and most others.
Click to expand...
Click to collapse
It was working till right after I fell into this rut.

I used mine for ADB, 3 days later I tried it again and no dice. Thought it was the ROM I was on, tried another one, still no dice. Flashed back to stock rooted, still nothing.
New cable, viola!

htchd2fix said:
ok first mount usb
load your zip into internal sd card
unmount usb
factory reset from recovery
erase cache
erase dalvcache in advanced
install zip from internal sd card
Click to expand...
Click to collapse
I'm unable to mount/unmount USB, as in, it doesn't do anything at all. My laptop still doesn't recognise the tab.

frederuco said:
I used mine for ADB, 3 days later I tried it again and no dice. Thought it was the ROM I was on, tried another one, still no dice. Flashed back to stock rooted, still nothing.
New cable, viola!
Click to expand...
Click to collapse
Okay, done. I shall let you know in a couple of days.
Ordered a new cable online.

[Q] Can't mount SDcard in any recovery

Hi,
I can't mount the SDcard in any recovery. The strange thing is that I CAN acces the card in the OS(Maximus HD) using ESfile explorer, and I CAN acces the card when connected with USB to my PC.
So at this moment, I can't flash anything anymore..
I have S-OFF and running Maximus HD. It happend when I tried to flash another ROM. The installation went fine but after the installation there was only 47 MB left as phone storage the rest was ''other''.
I couldn't fix it, so I wiped the rom, formatted the SD card so I had a clean start to try another ROM.
After this, the pc recognized the SD card as only 47 MB(total size). This was a problem, I couldn't reinstall a new ROM because there was not enough space..
I fixed this using ADB sideload and pushed the MaximusHD rom back to my phone. This worked and so at this point my phone is running fine, all the storage is back But as I said, I can't flash anything anymore
I tried different recovery's but they all say, can't mount /sdcard/.
Anyone ideas?
Thanks Allready!
Robert

Lieseratski said:
Hi,
I can't mount the SDcard in any recovery. The strange thing is that I CAN acces the card in the OS(Maximus HD) using ESfile explorer, and I CAN acces the card when connected with USB to my PC.
So at this moment, I can't flash anything anymore..
I have S-OFF and running Maximus HD. It happend when I tried to flash another ROM. The installation went fine but after the installation there was only 47 MB left as phone storage the rest was ''other''.
I couldn't fix it, so I wiped the rom, formatted the SD card so I had a clean start to try another ROM.
After this, the pc recognized the SD card as only 47 MB(total size). This was a problem, I couldn't reinstall a new ROM because there was not enough space..
I fixed this using ADB sideload and pushed the MaximusHD rom back to my phone. This worked and so at this point my phone is running fine, all the storage is back But as I said, I can't flash anything anymore
I tried different recovery's but they all say, can't mount /sdcard/.
Anyone ideas?
Thanks Allready!
Robert
Click to expand...
Click to collapse
You need to go back to the older firmware to run other ROMs
See this thread
http://forum.xda-developers.com/showthread.php?t=2480278
I just brought mine back to stock again yesterday again as a matter of fact.
Doing the 2nd way I posted in that thread.

Lieseratski said:
Hi,
I can't mount the SDcard in any recovery. The strange thing is that I CAN acces the card in the OS(Maximus HD) using ESfile explorer, and I CAN acces the card when connected with USB to my PC.
So at this moment, I can't flash anything anymore..
I have S-OFF and running Maximus HD. It happend when I tried to flash another ROM. The installation went fine but after the installation there was only 47 MB left as phone storage the rest was ''other''.
I couldn't fix it, so I wiped the rom, formatted the SD card so I had a clean start to try another ROM.
After this, the pc recognized the SD card as only 47 MB(total size). This was a problem, I couldn't reinstall a new ROM because there was not enough space..
I fixed this using ADB sideload and pushed the MaximusHD rom back to my phone. This worked and so at this point my phone is running fine, all the storage is back But as I said, I can't flash anything anymore
I tried different recovery's but they all say, can't mount /sdcard/.
Anyone ideas?
Thanks Allready!
Robert
Click to expand...
Click to collapse
i just experienced the recovery can't mount sdcard error today this worked for me..
http://forum.xda-developers.com/showthread.php?t=2206434
be sure to backup all data before as it will erase your data...