I soft bricked my phone on accident, So I decided to un soft brick it. So, I returned it to it's stock form. But, I installed the Rogers stock form. When I was suppose to install the AT&T stock form. Is there a way for me to change from Android Version 2.3.5 GINGERBREAD.RUXKJ7 to a 4.0.3 ICS ?
You can use Odin with the correct ics stock rom to get it back to where you want. See vicom's stickies.(in development section) They have what you need.
Sent from my SGH-I727 using xda app-developers app
jd1639 said:
You can use Odin with the correct ics stock rom to get it back to where you want. See vicom's stickies.(in development section) They have what you need.
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I tried installing the Stock files listed there multiple time, I keep getting errors.
Sammobile.com has the official files. You'll need to extract the tar.md5 file out of the zip using 7-zip and flash that with Odin.
You should also try a different usb port first as they seem to be touchy.
If Odin recovers your device you're still ok
Sent from my SGH-I727 using xda app-developers app
Recently i flashed cm10 alpha 4 and got a firmware error. I was on XXKPM but it ended up being DDLE1. I wanted to return to stock andI read the guide here
http://forum.xda-developers.com/showthread.php?t=1133787
However I don't know about the repartion thing . Is it selected for me and I should flash XXKPE directly ? My computer is dead and I want to know how to flash to stock so I can get working once I get my computer.
Sent from my GT-I9003 using xda app-developers app
chung1213 said:
Recently i flashed cm10 alpha 4 and got a firmware error. I was on XXKPM but it ended up being DDLE1. I wanted to return to stock andI read the guide here
http://forum.xda-developers.com/showthread.php?t=1133787
However I don't know about the repartion thing . Is it selected for me and I should flash XXKPE directly ? My computer is dead and I want to know how to flash to stock so I can get working once I get my computer.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
You have to flash xxkpe with all files like pit,modem and csc. once you will flash xxkpe your mobile will be automatically repatition. then flash your desire rom sam way as upper link.
HI there,
I wanted to install a custom recovery cwm on my tab 2 without flashing it by pc odin...cuz it will void my warranty( i'm using pre rooted stock rom so (warranty is still there)) so i wanted to know how to flash cwm using mobile odin.. from there everything's easy
Detailed steps would be appreciated..
Thanks in advance
Try any Rom,
Steps are already provided by individual developer.
Sent from my gt-p3100 using sungsonic hd.
Hello
I am new to Galaxy to Galaxy Tab
I want to root my GT-P3110 on 4.2.2 Samsung Stock
how do I do this
Sent from my GT-P3110 using xda app-developers app
hi, you can root your tablet by installing a custom recovery (like clockwork mod) and then installing cf auto root, that way you will have your stock firmware rooted. However i strongly recommend you to install a custom rom. Stock firmware comes preloaded with a lot of useless apps that occupymemory(ram and storage). If you install a custom rom your 3110 will feel more light and there is no need to root as they come already rooted. I have installed cyanogen mod in my 3110 and im 100% satisfied. Also best guide i ve found is the official cyanogen http://wiki.cyanogenmod.org/w/Install_CM_for_p3110
remember if you install a custom rom "Rooting the stock firmware is neither recommended nor necessary."
Thanks mate
Sent from my GT-P3110 using xda app-developers app
Instead of sticking to android 4.2.2, I recommend u to install 4.3 Roms like hellfire,slimbean etc,,,they are rooted by default and comes with lots of features that doesn't come on stock ROM,,stock based 4.2.2 lags a lot,,,and gaming performance is excellent in these 4.3 based ROMs, but as suggested by @katsika you gotta have custom recovery like CWM installed
Sent from my GT-P3100 using Tapatalk 4
root
jack54782 said:
Hello
I am new to Galaxy to Galaxy Tab
I want to root my GT-P3110 on 4.2.2 Samsung Stock
how do I do this
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
1.Enable usb debugging.2.Turn off your P3110.3.Go to download mode by pressing Volume+/Power.3Download Odin 3.5.Download expressowifi or something.5.Put in Odin 3 (where is pda section is).6.Your device will reboot.7.Enjoy.(Warranty will be void but you can unroot with odin using stock roms.:laugh:
If there is a questions please let me know ;D
Hello xda forum,
i own the before mentioned phone and recenty i tried to flash some custom roms on it but every time it wouldnt boot into system.
firstly i installed CWM with odin and rooted the phone, everything worked fine.
but after flashing any custom rom i tried (axxion, unofficial cm11, sazy and something else i think) it stops at samsung galaxy s2+ black and white screen for hours. or sometimes loops the same screen with few seconds of blank screen in between.
i flashed the stock back with odin and it worked fine, repeated cwm flashing and rooting, flashed custom rom. repeated that at least 4-5 times with same results.
my goal is to flash resurrection remix but it said
"Make sure you are either on any KitKat ROM (CM11, SlimKat, etc) or on 4.2.2 TW based ROM and NOT on 4.1.2 TW based ROM"
so i tried to flash cm11 before.
also tried the solution i found on forums (wiping dalvik cache and wiping cache numerous times, fixing permissions and all that with no luck)
i can acess CWM and download mode without problem but cant boot into system, only if i load a backup or flash a stock.
bump
anyone? pls help
im out of ideas
First of all, is ur Stock Rom 4.1.2 or 4.2.2? U can't flash cm11 or resurrection rom(or any other roms) if u have 4.1.2.
Sent from my GT-I9105P using XDA Premium 4 mobile app
thanks for reply,
my stock is 4.1.2. therefore i need to update to 4.2.2 first?
can you send me a link or something as a guide or ill search for it.
which basically means i need to flash 4.2.2. then cm11 and then resurrection?
or i am doomed to use stock?
Yes, u need flash 4.2.2 first and then custom rom. Custom roms don't work with 4.1.2 bootloader. U can find good guides if u search "how to flash Stock rom"
Sent from my GT-I9105P using XDA Premium 4 mobile app
Edit* And i "cm11 or resurrectuon remix " u can flash any rom what u want.
rs tony said:
Yes, u need flash 4.2.2 first and then custom rom. Custom roms don't work with 4.1.2 bootloader. U can find good guides if u search "how to flash Stock rom"
Sent from my GT-I9105P using XDA Premium 4 mobile app
Edit* And i "cm11 or resurrectuon remix " u can flash any rom what u want.
Click to expand...
Click to collapse
There are a few roms only for 4.1.2...CM10.2/babba rom/panda rom/pandonium and etc.Are they for 4.2.2?NO...If you can't help just don't post bull*****
Thanks for responding, ill try flashing 4.2.2 and then resurrection.
Ill update here if i encounter problems. Thanks for making this clear to me.
DenisRonaldo798 said:
There are a few roms only for 4.1.2...CM10.2/babba rom/panda rom/pandonium and etc.Are they for 4.2.2?NO...If you can't help just don't post bull*****
Click to expand...
Click to collapse
Well, he wanted custom rom what needs 4.2.2 bootloader so i meant he need flash 4.2.2 before if he want use cm11 like he tried. Maybe u should read before u come rage to me.
Sent from my GT-I9105P using XDA Premium 4 mobile app
could anyone possibly send me a good dl link for 4.2.2 stock?
all i seem to find is some bull**** locked to 50 kbps and such
is any firmware for I9105P from sammobile.com safe for me to flash?
cvjetojed said:
could anyone possibly send me a good dl link for 4.2.2 stock?
all i seem to find is some bull**** locked to 50 kbps and such
is any firmware for I9105P from sammobile.com safe for me to flash?
Click to expand...
Click to collapse
Yes, sammobile is most official place to download roms.
rs tony said:
Yes, sammobile is most official place to download roms.
Click to expand...
Click to collapse
to make everything clear for me:
so i just put the dld file in pda in odin, connect in download mode, uncheck weird things and press start to begin flashing?
anything else i need to know?
and after i flash that firmware, i need to install cwm and root and than i can flash the remix, right?
thanks for helping me
cvjetojed said:
to make everything clear for me:
so i just put the dld file in pda in odin, connect in download mode, uncheck weird things and press start to begin flashing?
anything else i need to know?
and after i flash that firmware, i need to install cwm and root and than i can flash the remix, right?
thanks for helping me
Click to expand...
Click to collapse
U don't need root, only install cwm. And yes, everything is right.
Sent from my GT-I9105P using XDA Premium 4 mobile app