Database Info

[Q] Problems with installing ICS-4.0.3 RC1 on Xperia Mini Pro

Hi
I was sitting for hours to make this thing work, but i just couldn't succeed.
I did everything I should:
-root my SK17i
-installed cwm auto-installer
-downloaded and copied the firmware to /sdcard/update.zip
So, when I boot into recovery, I choose "install zip from sd-card" and point to the update.zip file.
It starts and after a few seconds, it shows this error:
ERROR: /sdcard/update.zip (Status 7)
I have no idea, what i could do.
Please help me
Log:
-- Installing: /sdcard/update.zip
Finding update package...
I:Update location: /sdcard/update.zip
W:failed to mount /dev/block/mmcblk0p1 (No such file or directory)
Opening update package...
Installing update...
script aborted: assert failed: getprop("ro.product.device") == "SK17i" || getprop("ro.build.product") == "SK17i" ||
getprop("ro.product.device") == "SK17a" || getprop("ro.build.product") == "SK17a" ||
getprop("ro.product.device") == "SK17i" || getprop("ro.build.product") == "SK17i" ||
getprop("ro.product.device") == "SK17a" || getprop("ro.build.product") == "SK17a" ||
getprop("ro.product.device") == "mango" || getprop("ro.build.product") == "mango"
assert failed: getprop("ro.product.device") == "SK17i" || getprop("ro.build.product") == "SK17i" || getprop("ro.product.device") == "SK17a" || getprop("ro.build.product") == "SK17a" || getprop("ro.product.device") == "SK17i" || getprop("ro.build.product") == "SK17i" || getprop("ro.product.device") == "SK17a" || getprop("ro.build.product") == "SK17a" || getprop("ro.product.device") == "mango" || getprop("ro.build.product") == "mango"
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.

yes, help please!
I got the exact same isuue on my friends phone while I was trying to install. Please help.

Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A

Can't install MIUI from CWR

After attempting to open the update package, it says:
Assert failed: getprop("ro.product.device") == "SGH-I727" || getprop("ro.build.product") == "SGH-I727 || getprop("ro.product.device") == "skyrocket" || getprop("ro.build.product") === "skyrocket. E:Error in/emmc/MIUI.us.skyrocket_v4.1_2.10.19.1_... .zip (Status 7) Installation aborted.
I got it straight from this Forum, I'm not sure what the problem is.

What recovery are you using?
Sent from my SAMSUNG-SGH-I727 using XDA

darthstalker install error

hi i'm hoping someone can help me out with this issue
samsung galaxy s3 t999
us
after i go through all the setup and run the install is get this message
_
Now Let The Aroma Installer Work Its MAGIC!
Device: T-Mobile Galaxy S3 (USA)
Verifying device compatibility...
script aborted: assert failed: getprop("ro.product.device") == "d2tmo" || getprop("ro.build.product") == "d2tmo"
assert failed: getprop("ro.product.device") == "d2tmo" || getprop("ro.build.product") == "d2tmo"
Installer Error (Status 7)
End at : Fri May 8 03:32:04 1970

solved
alexsabre said:
hi i'm hoping someone can help me out with this issue
samsung galaxy s3 t999
us
after i go through all the setup and run the install is get this message
_
Now Let The Aroma Installer Work Its MAGIC!
Device: T-Mobile Galaxy S3 (USA)
Verifying device compatibility...
script aborted: assert failed: getprop("ro.product.device") == "d2tmo" || getprop("ro.build.product") == "d2tmo"
assert failed: getprop("ro.product.device") == "d2tmo" || getprop("ro.build.product") == "d2tmo"
Installer Error (Status 7)
End at : Fri May 8 03:32:04 1970
Click to expand...
Click to collapse
if anyone else has this problem try installing using twrp
working great now

[Q] Sprint Samsung Galaxy S3 Status 7 while installing Cyanogenmod

Hello guys I'm having some issues installing Cyanogenmod onto my Sprint (really virgin moblie) Samsung Galaxy SIII. I'm rooted with CWM and I've tried installing cm-10.1.3-d2spr.zip and cm-10.2-20131115-NIGHTLY-d2spr.zip. Each time I go to install the file it fails with "Status 7". I've found other forums for other devices, but none for the SPH-L710. below is the code I see running on the screen.
CWM-based Recovery v5.5.0.4
-- Installing: /sdcard/cm- 10. 1. 3-d2spr.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.bootloader") == "L710
VPBLJ7" | | getprop("ro.bootloader") == "L7
10VPBMA6" | | getprop("ro.bootloader") == "
L710VPBMB1" | | getprop("ro.bootloader") ==
"L710VPBMB4" | | getprop("ro.bootloader")
== "L710VPAMD7"
E : Error in /sdcard/cm-10.1.3-d2spr.zip
(Status 7)
Installation aborted

TheD1strictMan said:
Hello guys I'm having some issues installing Cyanogenmod onto my Sprint (really virgin moblie) Samsung Galaxy SIII. I'm rooted with CWM and I've tried installing cm-10.1.3-d2spr.zip and cm-10.2-20131115-NIGHTLY-d2spr.zip. Each time I go to install the file it fails with "Status 7". I've found other forums for other devices, but none for the SPH-L710. below is the code I see running on the screen.
CWM-based Recovery v5.5.0.4
-- Installing: /sdcard/cm- 10. 1. 3-d2spr.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.bootloader") == "L710
VPBLJ7" | | getprop("ro.bootloader") == "L7
10VPBMA6" | | getprop("ro.bootloader") == "
L710VPBMB1" | | getprop("ro.bootloader") ==
"L710VPBMB4" | | getprop("ro.bootloader")
== "L710VPAMD7"
E : Error in /sdcard/cm-10.1.3-d2spr.zip
(Status 7)
Installation aborted
Click to expand...
Click to collapse
try zedos method https://www.youtube.com/watch?v=QW1znjDLe-k

[Q][SynergyRom][SGS3 i9300] Error installing SynergyRom

Hi guys I have a rooted Galaxy S3, I decided to install the latest SynergyRom because I want the pDroid mainly.
I tried installing it using the latest CWM and the latest TWRP and even Philz, after clicking install the Aroma Installer opens up, I choose install and I get this :
Code:
AROMA INSTALLER version 2.56
(c) 2012 by amarullz xda-developers
ROM Name : SynergyROM for Galaxy S3
ROM Version : r484
ROM Author : eschelon, TrevE, Ziggy471, Virus, the_plattypus, Mr. X, freeza, NxtGenCowboy, eaglz70
Device : Galaxy S3
Start at : Wed Jul 16 19:25:57 2014
Installing SynergyROM
For the Galaxy S3
By: eschelon, TrevE, Ziggy471
Virus, Mr. X, freeza, NxtGenCowboy
the_plattypus, eaglz70
Checking Device Support
script aborted: assert failed: getprop("ro.product.device") == "d2att" || getprop("ro.product.device") == "d2tmo" ||
getprop("ro.product.device") == "d2usc" || getprop("ro.product.device") == "d2can" ||
getprop("ro.product.device") == "d2bmc" || getprop("ro.product.device") == "d2rwc" ||
getprop("ro.product.device") == "d2kdo" || getprop("ro.product.device") == "d2bwa" ||
getprop("ro.product.device") == "d2spr" || getprop("ro.product.device") == "d2vzw" ||
getprop("ro.product.device") == "d2mtr" || getprop("ro.product.device") == "d2cri" ||
getprop("ro.product.device") == "t0ltespr"
assert failed: getprop("ro.product.device") == "d2att" || getprop("ro.product.device") == "d2tmo" ||
getprop("ro.product.device") == "d2usc" || getprop("ro.product.device") == "d2can" ||
getprop("ro.product.device") == "d2bmc" || getprop("ro.product.device") == "d2rwc" ||
getprop("ro.product.device") == "d2kdo" || getprop("ro.product.device") == "d2bwa" ||
getprop("ro.product.device") == "d2spr" || getprop("ro.product.device") == "d2vzw" ||
getprop("ro.product.device") == "d2mtr" || getprop("ro.product.device") == "d2cri" ||
getprop("ro.product.device") == "t0ltespr"
Installer Error (Status 7)
End at : Wed Jul 16 19:25:57 2014
I tried using this thread to solve the problem, however I ended up having an" error flashing zip ... " so Aroma doesn't even run anymore
This isn't a signature verification error since is already opened the zip file and started Aroma installer;
The device is obviously compatible, the ROM is the latest build so are the recoveries so why does it reach an error after checking compatibility ? Thanks in advanced guys