[Q] Need a RUU for my Ville C2 - HTC One S

Can I get a compatible RUU for my Ville C2? I've tried these
RUU_VILLEC2_U_ICS_40_hTC_Asia_WWE_1.11.707.112_Radio_16.12.20.02U_16.05.20.16_M2_release_264458_signed
RUU_VILLEC2_U_ICS_40_S_HTC_Europe_2.15.401.100_Radio_16.21.20.02U_16.09.20.11_M2_release_286571_signed
but it kept saying CID Check fail ...
Following is the detail about my phone ... Pls help me ...
version: 0.5
version-bootloader: 2.09.0001
version-baseband: 16.05.20.24_M
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: SH261W401960
imei: 352762055675317
product: villec2
platform: HBOOT-8260
modelid: PJ4020000
cidnum: HTC__044
battery-status: good
battery-voltage: 3676mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: f616909f
hbootpreupdate: 11
gencheckpt: 0
It keep show these errors ...
C:\android-sdk\platform-tools>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
(bootloader) Start Verify: 3
OKAY [ 0.150s]
finished. total time: 0.150s
C:\android-sdk\platform-tools>fastboot flash zip rom.zip
sending 'zip' (508987 KB)...
(bootloader) start check_usb: usb_ep0: type=128, request=6
OKAY [ 54.164s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 131.563s

Your phone seems branded. You have to get the RUU from the carrier you're on or you have to change your CID (which is not working with the villec2).

S3 RUU
.TanTien said:
RUU_VILLEC2_U_ICS_40_hTC_Asia_WWE_1.11.707.112_Rad io_16.12.20.02U_16.05.20.16_M2_release_264458_sign ed.
Click to expand...
Click to collapse
I tried the HTC_Asia one but when it went to verify my image it didn't show what version I currently had. It was blank. Is that something that I can just ignore and keep going?
Maybe I am not doing it right. ran command: fastboot oem lock
received reply: lock successfully...
TZ_HTC_SVC_DISABLE ret - 268303736 failed (status read failed )Too many Links)
Then I ran the RUU from my PC. Was I suppose to rename it to Rom.zip and run
fastboot oem rebootRUU + fastboot flash zip rom.zip

Super CID
You can try changing CID with this proceure:
http://forum.xda-developers.com/showthread.php?t=1807214
I haven't tried it yet as I haven't found a RUU to need to do it for.

Quills88 said:
You can try changing CID with this proceure:
http://forum.xda-developers.com/showthread.php?t=1807214
I haven't tried it yet as I haven't found a RUU to need to do it for.
Click to expand...
Click to collapse
don't work with s3/villec2
there is no way to do this on s3!

Related

Help, HTC J butterfly bricked,can't enter fastboot or recovery

Help me!!!
The phone have been s-off and unlock bootloader before.
But after bricked, I want to flash official RUU to fix it,
So I run fastboot oem lock , the bootloader was locked again and can't be be unlock again ,becuase the hboot version has changed.
Current status:
Screen is not bright ,but plug my phone with usb can list unknown devices. and I can use fastboot command to list devices. but can't flash any files.
F:\signed>fastboot flash zip PL99IMG.zip
sending 'zip' (488 KB)...
OKAY [ 0.025s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 0.035s
F:\signed>fastboot devices
???????????? fastboot
F:\signed>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.41.0000
(bootloader) version-baseband: 1.01.10.0201
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: 355195000000010
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.070s
Thanks
If you can get into fastboot like you are. Your not hard bricked.
To flash the RUU like you are doing. In fastboot do the following commands...
Fastboot oem rebootRUU
Fastboot flash zip PL99IMG.zip
That should work.
Sent from my HTC6435LVW using Tapatalk 2
Flyhalf205 said:
If you can get into fastboot like you are. Your not hard bricked.
To flash the RUU like you are doing. In fastboot do the following commands...
Fastboot oem rebootRUU
Fastboot flash zip PL99IMG.zip
That should work.
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
not work
Fixed by RIFF box JTAG
Thanks
Help, HTC butterfly bricked,blocked in fastboot
Hello everyone,
asking for your help because my htc butterfly is stuck in fastboot after the procedure to bring it back to stock rom.
Unfortunately I could not find the ruu.exe and tried as indicated but unfortunately they are now in this situation.
Now the phone is relocked and S-ON, is there any way to replace it?
thanks to those who help me.
help
vjeson said:
not work
Fixed by RIFF box JTAG
Thanks
Click to expand...
Click to collapse
can you make downgrade from 1.29 ota to 1.15 with riff box?
I am locked and I can sim unlock! please give more details!
thank you
vjeson said:
Help me!!!
The phone have been s-off and unlock bootloader before.
But after bricked, I want to flash official RUU to fix it,
So I run fastboot oem lock , the bootloader was locked again and can't be be unlock again ,becuase the hboot version has changed.
Current status:
Screen is not bright ,but plug my phone with usb can list unknown devices. and I can use fastboot command to list devices. but can't flash any files.
F:\signed>fastboot flash zip PL99IMG.zip
sending 'zip' (488 KB)...
OKAY [ 0.025s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 0.035s
F:\signed>fastboot devices
???????????? fastboot
F:\signed>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.41.0000
(bootloader) version-baseband: 1.01.10.0201
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: 355195000000010
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.070s
Thanks
Click to expand...
Click to collapse
you're have soff, are you chaged cid? with stock rom you're need write cid (your CID of stock rom) , flash FW and get token code again (fastboot oem get_identifier_token)
after unlock bootloader, you can flash stock rom.
Junior Member - OP :
How can you Fixed by RIFF box JTAG
no JTAG for HTL21...
can you help me..
I Have the same problem as you..
bright screen (blank), fastboot ok..
but failed..
please help me..
Thanks.
vjeson said:
Help me!!!
The phone have been s-off and unlock bootloader before.
But after bricked, I want to flash official RUU to fix it,
So I run fastboot oem lock , the bootloader was locked again and can't be be unlock again ,becuase the hboot version has changed.
Current status:
Screen is not bright ,but plug my phone with usb can list unknown devices. and I can use fastboot command to list devices. but can't flash any files.
F:\signed>fastboot flash zip PL99IMG.zip
sending 'zip' (488 KB)...
OKAY [ 0.025s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 0.035s
F:\signed>fastboot devices
???????????? fastboot
F:\signed>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.41.0000
(bootloader) version-baseband: 1.01.10.0201
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: 355195000000010
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.070s
Thanks
Click to expand...
Click to collapse
1. Download firmware from here:
https://mega.co.nz/#!pEVXGZ6K!auhgoO81DzNQduWfJPQJ-lBV6g29PL6wAOEvpYsm1Hk
2. On fastboot, flash this firmware
fastboot oem rebootRUU
fastboot erase cache
fastboot flash zip firmware1.55_cid044.zip
fastboot reboot-bootloader
and see if you can manage from here.
Credits:
victor0888
---------- Post added at 02:01 PM ---------- Previous post was at 01:39 PM ----------
Try to download and flash a new/different firmware.

fastboot failed:image update error

Hi all,
My friends HTC One SV has got itself stuck on the boot screen. Also I cannot enter recovery mode (Selecting "recovery" just vibrates, shows the android skaters, and then goes back to hboot).
After booting into hboot and then fastboot usb, I'm trying to flash a new recovery image or a new boot.img. Unfortunately I get this output:
Code:
>fastboot.exe devices
HT31KTP01681 fastboot
>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.21.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxx
(bootloader) meid:
(bootloader) product: k2_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PL8010000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4200mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2bb255c2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.093s
>fastboot flash recovery TWRP-2.7.0.1-k2_ul-k2u.img
sending 'recovery' (8452 KB)...
OKAY [ 1.203s]
writing 'recovery'...
[B]FAILED (remote: image update error)[/B]
finished. total time: 2.513s
>fastboot flash boot images\422_k2ul_stock_kernel\boot.img
sending 'boot' (6160 KB)...
OKAY [ 0.911s]
writing 'boot'...
[B]FAILED (remote: image update error)[/B]
finished. total time: 2.224s
Anyone else seen this and know if its fixable?
Info at the top of hboot:
Code:
TAMPERED
UNLOCKED
K2_UL PVT SHIP S-ON RL
HBOOT-2.21.0000
OS-
eMMC-boot 1024MB
Nov 7 2013 15:32:31.0
@captainbadger
First: removed the serial number also from you fastboot devices result, please.
Then, have you tried another recovery build too? This one should also work on your hboot.
About the hboot: you can't update your hboot when the device is S-On.
What you can try, (if you can't flash recovery) is to flash again the whole firmware package. But as far as i know you must lock the bootloader for that and i don't know if you can flash the same firmware on the already same installed firmware.
But you have not much options for a S-on device, which don't has a working custom recovery.
A small F.A.Q. to understand things. Not written for k2ul but most likely similar.
Yep I tried another recovery just to be certain. No luck.
Then you should maybe really lock the device and try to flash the firmware.zip.
And maybe then you have more luck with recovery.
OK.
I need to reflash firmware.zip.
To do that I need to relock the bootloader.
To do that I need S-Off.
To do that I need to install and run firewater
To do that I need to get a working adb shell connection.
That doesn't work. The only working connection I have is fastboot. I assume that adb requires the OS to be up and running. This isn't the case.
You can relock your bootloader with fastboot cmd:
Code:
fastboot oem lock
Then you should be able to flash a signed (by HTC) firmware.zip, also when you are S-on.
The firmware.zip you need, you can get here: http://d-h.st/uwh
How to flash, you'll find in the linked FAQ in post #2.
old.splatterhand said:
You can relock your bootloader with fastboot cmd:
Code:
fastboot oem lock
Click to expand...
Click to collapse
Nah doesn't work:
Code:
C:\adt\sdk\platform-tools>fastboot oem lock
...
(bootloader) SD: write failed in CMD25.
(bootloader) [PG_ERROR] htc_pg_part_update(982):
(bootloader) sd_write_sector failed
(bootloader) [PG_ERROR] htc_pg_part_traverse(930):
(bootloader) fn return error
(bootloader) Lock successfully...
(bootloader) mipi_dsi_panel_off
(bootloader) **** This command mode dma test is failed ****
(bootloader) pm8038_vreg_disable function, vreg_id = 1
(bootloader) TZ_HTC_SVC_DISABLE ret = 536739196 (0x1FFDFD7C)
FAILED (status read failed (Too many links))
finished. total time: 2.283s
C:\adt\sdk\platform-tools>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
(bootloader) SD: write failed in CMD25.
OKAY [ 1.228s]
finished. total time: 1.228s
C:\adt\sdk\platform-tools>fastboot erase cache
erasing 'cache'...
FAILED (remote: erasing error!)
finished. total time: 1.140s
Ok, but then i'm sorry, i don't have a idea, whats wrong with your device.
Yeah seems like a hardware issue. It has a cracked screen so maybe that's what caused it. Thanks for the advice anyway.
Pop quiz folks! Has any of you experienced problems with installing a Splash screen using HBoot 2.21? I can't even find which partition it is currently stored on an I checked all 38 of them. Any ideas from you guys?
Sent from my C525c using Tapatalk
---------- Post added at 09:43 PM ---------- Previous post was at 09:29 PM ----------
Disregard..... It's been so long for me that I actually forgot it had to be placed at the root of the external sdcard haha. Oops!
Sent from my C525c using Tapatalk

[Q] Can't flash stock ROM

So that's my story cut short:
I was and is S-On
I had HBoot v1.13, upgraded it by RUU flashing firmware.zip from OTA_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_1.11.50.05.28_10.27.50.08L_release_301852xf01hejl416oev96.zip
Now I have HBoot 2.15 and TeamWin Recovery 2.8 .
ZenROM flashes with no problem, but that's still no stock, as the signature of /system is broken.
But in order to get S-Off, which is necessary at least to gain hboot 2.16 for Liberty ROM, I need to get stock ROM.
This is necessary in order for phone to boot with bootloader locked(signature should validate), which is a prereq for Faceplam S-Off(as I understand)
But every RUU I flash says:
Code:
sending 'zip' (534178 KB)...
OKAY [ 21.050s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) checking main version...
(bootloader) checking hboot version...
FAILED (remote: 44 hboot version check fail)
finished. total time: 73.893s
And every OTA I try to install in TWRP says I have a CID mismatch , no matter leave I my original (HTC_A07) or SuperCID
Help anyone?
That's my config. I deliberately downed main version, because otherwise during RUU flash I got "invalid main version" instead
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.00.000.0
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT23XW411592
(bootloader) imei: *****************
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__A07
(bootloader) battery-status: good
(bootloader) battery-voltage: 4203mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.065s
Actually you don't need a stock rom. As far as I know you only need a sense rom. I S-OFFed while I had this rom installed.
Flippy498 said:
Actually you don't need a stock rom. As far as I know you only need a sense rom. I S-OFFed while I had this rom installed.
Click to expand...
Click to collapse
Which S-Off did you use? Rumrunner and firewater didn't work for me
I used facepalm. I know a lot of people here say that it won't work on hboot 2.15 but for me it did work. Don't know why...
Flippy498 said:
I used facepalm. I know a lot of people here say that it won't work on hboot 2.15 but for me it did work. Don't know why...
Click to expand...
Click to collapse
But with facepalm you need to flash PJ4010000.zip (or whatsitsname) in RUU mode(mean you should relock) and when it says "Error: 92 supercid blablablah" you should boot immediately, right?
And you're still with locked bootloader.
And on custom ROM, which means on boot the signature will be checked AND will fail, so it won't boot at all - that's what happens to me...
Tell me I'm wrong, cause otherwise I can't s-off neither I can flash stock...
Well, I SOFFed more than one and a half year ago. But as far as I remember you don't need to relock since you don't want to run a RUU.
Just looked it up. The instructions in the facepalm thread do not mention that you need to relock. Try again to S-OFF without relocking.

[Q] Problem after moonshining

Hi, I have problem with my phone which is similar to the one described in this topic.
I have tried to S-off my One SV but I didn't update to the newest version of stock ROM which resulted in an error while running moonshine (it stopped after step 10 saying "Don't drink and moonshine" which was quite funny at first ).
Now the hboot says that the phone is unlocked and tampered.
I have tried flashing a stock rum using RUU exe file but it obviously failed.
Flashing .img files works fine (I have already tried to flash several boot.img's), I have even tried to flash new Venom ROM using TWRP recovery and it flashed fine, but the phone hangs on boot screen.
When I try to flash zip using fastboot it fails:
sending 'zip' (441985 KB)...
OKAY [ 19.654s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 24 parsing android-info fail)
finished. total time: 31.754s
When I try to flash anything using PL80IMG.zip method the file is being read (I can see a progress bar) but nothing happens after that.
getvar all output:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.01.0000
(bootloader) version-baseband: 0.12.40.00.14_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT32WTP00820
(bootloader) imei: 352803051180587
(bootloader) product: k2_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PL8010000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3986mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.075s
I would appreciate any help Thanks

Trouble Unlocking Bootloader with bricked HTC Sensation XE

Hello. I have a problem because I flashed HTC Sensation PG58IMG.zip minimal version for recovery and hboot, not the RUU.
Now I cannot even unlock bootloader needed to flash a recovery file like TWRP.
Code:
fastboot oem get_identifier_token
(bootloader) [ERR] Command error !!!
OKAY [ 0.026s]
finished. total time: 0.026s
Using adb doesn't work at all.
Code:
adb shell
error: no devices found
Code:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.17.0011
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.50.401.1
(bootloader) serialno: SH1AWV806609
(bootloader) imei: 359118040549062
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813001
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 92e53710
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.034s
Looks hopeless.
What do I now?
Has anyone successfully removed the internal memory card? I have the beats audio version.
kgpdeveloper said:
Hello. I have a problem because I flashed HTC Sensation PG58IMG.zip minimal version for recovery and hboot, not the RUU.
Now I cannot even unlock bootloader needed to flash a recovery file like TWRP.
Code:
fastboot oem get_identifier_token
(bootloader) [ERR] Command error !!!
OKAY [ 0.026s]
finished. total time: 0.026s
Using adb doesn't work at all.
Code:
adb shell
error: no devices found
Code:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.17.0011
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.50.401.1
(bootloader) serialno: SH1AWV806609
(bootloader) imei: 359118040549062
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813001
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 92e53710
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.034s
Looks hopeless.
What do I now?
Has anyone successfully removed the internal memory card? I have the beats audio version.
Click to expand...
Click to collapse
you are on S-OFF
you are unlocked
just a flash a custom recovery from fastboot and flash a custom rom
by the way can you boot to the android?
rzr86 said:
you are on S-OFF
you are unlocked
just a flash a custom recovery from fastboot and flash a custom rom
by the way can you boot to the android?
Click to expand...
Click to collapse
I cannot.
Plus, I cannot flash anything.
Code:
fastboot flash zip PG58IMG.zip
sending 'zip' (5333 KB)...
OKAY [ 1.457s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 1.477s
Or fix the issue.
Code:
fastboot oem get_identifier_token
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.026s]
finished. total time: 0.026s
kgpdeveloper said:
I cannot.
Plus, I cannot flash anything.
Code:
fastboot flash zip PG58IMG.zip
sending 'zip' (5333 KB)...
OKAY [ 1.457s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 1.477s
Or fix the issue.
Code:
fastboot oem get_identifier_token
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.026s]
finished. total time: 0.026s
Click to expand...
Click to collapse
have you enabled usb debugging mode from settings?
also don't forget to select fastboot from bootloader when you are connecting the device to the pc(in the screen should say fastboot usb)
by the way if you are trying to unlock the bootloader from htcdev site there is no need to because you are on S-OFF
do this ,flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums (important)

Categories

Resources