[Q] Galaxy Tab 2 is frozen - Galaxy Tab 2 Q&A, Help & Troubleshooting

I rooted my tablet a couple of months ago so that I could use the SwitchMe app. Everything was working well until the firmware update this week. After the update the switchme app no longer woked and errors shows for the supersuser app. I tried to re-root the tablet, but the tablet froze up after the download from Odin. It is now stuck on the samsung screen. If I press power for while the logo will disappear and return. Pressing volume down and power does nother, pressing volume up and power puts the tablet into download mode with no option for recovery mode. WHen I try to reboot, I am back to the logo screen. What can I do?

odin again ?
Put the tab into download mode and why not flash CWM from Odin ?? Shouldnt that solve the problem ?

jmqstadler said:
It is now stuck on the samsung screen. If I press power for while the logo will disappear and return. Pressing volume down and power does nother, pressing volume up and power puts the tablet into download mode with no option for recovery mode. WHen I try to reboot, I am back to the logo screen. What can I do?
Click to expand...
Click to collapse
If it's in a boot loop, you might still be able to get into recovery mode, but it's tricky. Basically, you just keep trying and adjusting your timing. It depends on what you flashed with Odin.
If that doesn't work, you still have a few options:
1. Samsung Kies - Go to Tools -> Firmware upgrade and initialisation. Make sure the tablet is NOT connected to the PC yet. It will prompt you for your model number (e.g. GT-P5113) and then your serial number (both are case-sensitive). I think you can find your serial number on the box or possibly on the back of the tablet in very small print. It should then download the firmware and flash it. When it prompts you to put it into recovery mode, put it into download mode and connect it.
2. Download the stock firmware for your device and flash it with Odin. I don't know which model you have, so either look for it in the appropriate Development forum, or get it from SamMobile.
Both of these options should give you a new stock recovery. If you still have problems, then go into recovery and do a Data wipe / factory settings.

Thanks for your response. I have the GT-P5113, BTW. What exactly do you mean by flashing and CWM? I admit I am not an expert by any means on the jargon

I noticed the update this week also. I've looked at reviews for the JB update and I went and disabled it for now. I've already rooted my Tab but I'm not sure I'm ready for JB just yet. Plus with being rooted the official firmware won't download correctly anyways
Sent from my GT-P3113 using XDA Premium HD app

Ok, I'm not sure what happened, but I did all the things suggestec and all of a sudden the tablet turned back on! I uninstalled switchme and the superuser app. I don't think the tablet is rooted anymore, but I am not sure. I am scared to try and root it again. Is there any issue with rooting and the new updated firmware? My husband and I really liked the ability to have separate profiles. Also it looks as if all his apps are gone.

jmqstadler said:
Ok, I'm not sure what happened, but I did all the things suggestec and all of a sudden the tablet turned back on! I uninstalled switchme and the superuser app. I don't think the tablet is rooted anymore, but I am not sure. I am scared to try and root it again. Is there any issue with rooting and the new updated firmware? My husband and I really liked the ability to have separate profiles. Also it looks as if all his apps are gone.
Click to expand...
Click to collapse
I've rooted myself with the official OTA from Samsung and there is no issue on my side at least. I'd suggest the official OTA or sungsonic by adi. Either one is running a JB kernel and runs smoothly.
I'd suggest the sungsonic one more because it utilizes SuperSU vs superuser. Just a personal preference on my part but it seems to have less issues.
Sent from my ADR6400L using Xparent ICS Tapatalk 2

Related

This is how to Root Rogers Samsung Rugby!

Been trying to Root this phone for a couple of days. Finally manged to do it!
Its the Rogers Samsung Galaxy Rugby. The (GT-S5690R) model.
I had to add the (R) in the updater script. Thats how I got it too root.
1. Put the file on your sd-card Universal_GB_ROOT_v5_patched_for_S5690.zip
2. Turn phone off
3. Boot in to Recovery ( press Power, Vol-up, and center button on bottom of phone all at same time. The samsung logo will appear, keep holding all buttons, then the logo will dissapear then re-appear, when it comes back let go of the power button only. The phone should boot into the 3e recovery)
4. use vol keys to navigate through menu, and use center button on the bottom of the phone to select.
5. Select install update from sd card.
6. press on the Universal_GB_ROOT_v5_patched_for_S5690.zip
7. phone should install root, wait till the 'Success' appears, then reboot.
You should find Superuser app when your phone reboots. You are Rooted!!
Now im just trying to figure out how to get a custom recovery!!
Perfect!
This zip file worked perfectly on my Rogers Galaxy Rugby. Many thanks!
Happy to hear
Sent from my GT-S5690R using xda premium
Big problem now though....
So the root went swimmingly, but I got a little too excited removing pre-installed apps. I backed up and removed Samsung Home, and removed and NOT backed up SNS 1.0. The phone will now refuse to boot unless I wipe data/factory reset in recovery mode, but after that it just ends up crashing during the Android wizard start up....
This is a brand new phone, what can I do to restore those apps, and get it back to the way I received it earlier today?!
There is a way to boot into safe mode, head Google mod2extreme and I find the forum for our phones (currently the only one) find advise there
Sent from my GT-S5690R using xda premium
Thanks for the name of that forum! I've found the guide someone posted here: http://www.mod2xtreme.com/showthread.php?t=12386 and I've decided to try it.
I'm using the first firmware listed in this thread: http://www.mod2xtreme.com/showthread.php?t=11744 (S5690XXKL1 2.3.6 2011 December S5690OXFKL1) mostly because under Country/Carrier it has nothing, so I'm assuming it's more generic than the others. I'm also keeping in mind this is for the 5690, not the 5690R, so it may not work at all. But, worth a shot since my only other recourse is to break down and cry in front of a Rogers attendant to see if he can give me a new one. "Root? What's root? Like ginger?"
I'm using v.1.83 of Odin3, which is listed as supported the 5690.
Downloaded KIES 2.0 from http://www.samsung.com/my/support/usefulsoftware/KIES/JSP - It gave me two DLL registration (COM) errors during installation on Windows. Uncertain if this will end up screwing me over or not.
Be right back, rebooting now that KIES is installed... will edit this post when there's more to report.
EDIT: Yeah, so I ended up trying both Odin version 1.83 and 1.85, with the Marvell .pit file, and the firmware from that thread. I learned that I had to put the phone into Download Mode, NOT Recovery Mode while trying Odin. Even still, nothing worked. I've given the phone up to Rogers and they will try to replace the original ROM, hopefully they won't notice that I've rooted it and really mucked everything up. They said if it doesn't work they'll send it off to Samsung to get it repaired. Anyone know if they find out I rooted it, I'd have to pay for voiding a warranty or anything?
i have the same device hae you manage to get clockworkmod recovery on it?
Does this method erase all personal data/downloaded apps from phone?
Great it worked perfectly...
did you success in installing different firmware?
Thanks again
Thanks a lot, worked like a charm.
Is there a way I can install Clockwork Mod? Rom manager doesn't recognise the s5690r. It gives me the option of selecting the Epic4G or the GalaxyS i9000. will either of these work?
Also, once I get that figured out, is there any roms compatible with the s5690r? I've scoured the webs with no luck. Not a very popular phone, eh?
Thanks again.
markdexter said:
Been trying to Root this phone for a couple of days. Finally manged to do it!
Its the Rogers Samsung Galaxy Rugby. The (GT-S5690R) model.
I had to add the (R) in the updater script. Thats how I got it too root.
1. Put the file on your sd-card Universal_GB_ROOT_v5_patched_for_S5690.zip
2. Turn phone off
3. Boot in to Recovery ( press Power, Vol-up, and center button on bottom of phone all at same time. The samsung logo will appear, keep holding all buttons, then the logo will dissapear then re-appear, when it comes back let go of the power button only. The phone should boot into the 3e recovery)
4. use vol keys to navigate through menu, and use center button on the bottom of the phone to select.
5. Select install update from sd card.
6. press on the Universal_GB_ROOT_v5_patched_for_S5690.zip
7. phone should install root, wait till the 'Success' appears, then reboot.
You should find Superuser app when your phone reboots. You are Rooted!!
Now im just trying to figure out how to get a custom recovery!!
Click to expand...
Click to collapse
Good Day, I am also working on the Bell Canada Version of the Rugby. It is the GT-s5690m model. I am now stuck in a bootloop and don't know how to fix it. I have played around with the root and unroot zip files that have been floating around but I am certain that the bootloop is due to not being able to clear the Delvik Cache. As you are aware Clockworkmod recovery is not supported on our devices. I am unsure how to get it to work. Until then I just keep trying different things to hopefully get this phone up and working. It is quite a rugged device and would be great with a custom rom and recovery. Could you explain to me in layman's terms how I might create a flashable clockwork image to flash via Odin or even through stock recovery. I would love to get this phone up and working. Thanks in advance
Sasktel Rugby
Hi there. I am working on the Sasktel version of this phone as well. I tried to change the model from R to M because this phone is the same as the bell model version but it would not install it. I found it on the external SD card but it will not run the zip file from the 3e recovery. Any ideas why this might be happening?
Thanks,

[Q] Problem during rooting help

I was attempting to get root access to my galaxy tab 2 10.1 running android 10.2.1 (or whatever the latest Samsung update was it is 10.2 on my phone but am sure it was 10.2.1 on the tablet.
I was following this guide that someone here recommended
http://www.ibtimes.co.uk/articles/4...-p5113-android41-jellybean-android404-ics.htm
I set usb debug and made sure the drivers were on my pc and made sure KIES was completely not running
Followed the instructions to the letter but should have worried when I found the instructions to get to download were wrong - I found on videos that it was reboot using power and right volume key. That was successful
It connected to ODIN fine and the yellow box came up
I made sure the two boxes were ticked and then searched for the file
CF-Auto-Root-espresso10wifi-espresso10wifibby-gtp5113.zip and started ODIN
it seemed to be going fine until suddenly a red box came up with update failed
Now all I can get on the device is "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
No matter how I try to restart this I get the same screen and imagine I couldn't connect to kies even if I should
Can anyone help as I am worried that I have bricked my device - I was looking for a simple way to get root without flashing a whole rom - or is that what I was doing anyway?
Here is a link that may can help you : http://forum.xda-developers.com/showthread.php?t=1722745
Try to do the point A to install CWM Recovery and root correctly the tab then do the point E to install the stock Android 4.0.4
ps : if you want to do something to your tab, try to search here before other websites, big community, good informations/tips (personnal advise) :good:
Maybe file you downloaded is corrupted , redownload it from xda or sammobile and do steps again
n0is said:
Here is a link that may can help you : http://forum.xda-developers.com/showthread.php?t=1722745
Try to do the point A to install CWM Recovery and root correctly the tab then do the point E to install the stock Android 4.0.4
ps : if you want to do something to your tab, try to search here before other websites, big community, good informations/tips (personnal advise) :good:
Click to expand...
Click to collapse
I will take a look but so far the only thing I get is the message to connect to KIES and it wont of course connect - cant get into any other modes - you would think they would have some kind of hard boot recovery button that gets you to basic screen to download the latest firmware.
And I did start here and believe that this led from a post here - I was trying to find the least complicated method of getting root access without changing what I already had too much - the only other process that I found on here seemed to have lots of people reporting problems if it wasn't a 3g model
It is beginning to look like I may have found out what bricking is - thanks for the reply anyway
would like to do that
mjrshark said:
Maybe file you downloaded is corrupted , redownload it from xda or sammobile and do steps again
Click to expand...
Click to collapse
In fact the instructions do say if it doesn't work first time, to run it again with the boxes unticked - the problem is that I cant get back to download mode, or any mode other than the message to connect to kies, so have no way of doing this. So looks like it may have bricked - is there any way of unbricking a tablet?:crying:
It's going to be an expensive mistake especially as I haven't even had the £50 cash back from Samsung yet and I would have to pay full price now to replace it,
So did you remove it from Odin after it failed?
If you connect and pull up Odin, even though its not in download mode, do you get an active com box showing its connected?
Have you tried kies yet?
There is a simple method of rooting in the link posted in the previous post by n0is. At this point you might have to flash a stock image before you try and root again. If you can get an active com port in Odin, run a stock image first, they can be found here in xda. Get it booted up and then make sure you are on the latest android version, its 4.1.1 here in the US. If you try and root first and then update, you will lose root so update first to avoid rooting twice.
Just to clarify the root procedures,
Odin the cwm recovery .tar from the thread.
Reboot to recovery then flash the super user zip for the p5113. It will ask you about erasing stock recovery or something like that, check yes.
And that's it, simple enough
Sent from my SCH-I535 using xda premium
not optamistic but will try!
samsgun357 said:
So did you remove it from Odin after it failed?
If you connect and pull up Odin, even though its not in download mode, do you get an active com box showing its connected?
Have you tried kies yet?
There is a simple method of rooting in the link posted in the previous post by n0is. At this point you might have to flash a stock image before you try and root again. If you can get an active com port in Odin, run a stock image first, they can be found here in xda. Get it booted up and then make sure you are on the latest android version, its 4.1.1 here in the US. If you try and root first and then update, you will lose root so update first to avoid rooting twice.
Just to clarify the root procedures,
Odin the cwm recovery .tar from the thread.
Reboot to recovery then flash the super user zip for the p5113. It will ask you about erasing stock recovery or something like that, check yes.
And that's it, simple enough
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I will try but I don't think it is going to work. Whenever I connect the tablet by USB I get the usb connecting sound followed immediately by the USB disconnect sound - this just continues to happen every 4 seconds or so all the time that the device is connected. At the moment I have it on charge as once the error screen comes on it doesnt seem to go off for a very long time and then it wont start unless I charge it first. After a few minutes on charge - The firmware upgrade encountered an issue message comes up. I am going to leave it a while until I am sure it is fully charged and then try what you suggest - not optamistic though since I now realise that it is not even connecting properly. I just have a bad feeling about this. I had to disconnect it from the power yesterday because the error screen stays on continuously and the device starts to get warm
Assuming that I ever manage to get a stock image installed will this mean I can go back to normal kies updates - all I really wanted was the standard samsung android O/S but with super user added.
Unfortunately I had read the linked article a while back and what made me more confident was the statement that said it was "virtually impossible to brick this device"
Since it's still going into Charging mode and spitting out error messages, it's not completely bricked. It's just in a reboot loop (a.k.a. soft brick).
Keep trying to get it into Download mode. Sometimes the timing is a little tricky if it's in a boot loop.
1. Disconnect it before trying to get it into Download Mode. If it's plugged in (charger or PC), the device will go into Charging mode instead.
2. Hold the Power button for 10 seconds to make it reboot.
3. When you see the screen turn off, let go of Power and then press and hold Power and Volume Right/Up.
4. If done correctly, it will immediately go into Download Mode. If you see the Samsung logo instead, repeat from Step 2.
some progress but still stuck - any more ideas please
samsgun357 said:
So did you remove it from Odin after it failed?
If you connect and pull up Odin, even though its not in download mode, do you get an active com box showing its connected?
Have you tried kies yet?
There is a simple method of rooting in the link posted in the previous post by n0is. At this point you might have to flash a stock image before you try and root again. If you can get an active com port in Odin, run a stock image first, they can be found here in xda. Get it booted up and then make sure you are on the latest android version, its 4.1.1 here in the US. If you try and root first and then update, you will lose root so update first to avoid rooting twice.
Just to clarify the root procedures,
Odin the cwm recovery .tar from the thread.
Reboot to recovery then flash the super user zip for the p5113. It will ask you about erasing stock recovery or something like that, check yes.
And that's it, simple enough
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Hi well thanks -
when I connected Odin it did show up yellow and so I downloaded the P5110 stock from from the other thread - all went well and it reported all OK and re-booted - saw the animated sequence but now it has stalled on the samsung logo and still wont connect to kies
So still stuck but at least it has moved on - The instructions on the other page were a little unclear about one stage
It said if there was pit file included to set something and tick repartition - this was all in one line and so I assumed part of the pit instruction - as there was no pit file I did not tick re-partition - I wonder if I should have done?
I have just reconnected to ODIN and the ID Com is still lit up yellow so presumably I could try running it again, or should I look on here for another stock rom - I am wondering if I have somehpw scewed up the bootloader and if so how I go about restoring it
ODIN is the only thing it connects to right now

Still having Tab2 woes

I have an earlier thread here http://forum.xda-developers.com/showthread.php?t=2107600 but that is now buried on page 2 and might be missed by new readers. After a disastrous time trying to root my Galaxy Tab 5100 I did manage with the help of people here to flash the recommended stock ROM - however while the tablet goes through its boot sequenece with the aminated Samsung sign - it sticks when it gets to the plain Samsung logo and wont go further.
Odin reported that it installed OK and the tab rebooted as it should but only this far - not sure what I should try next to get my stock Samsung image back and working. One thing I didn't do was to tick repartition because the instructions only said to do this when a certain type of file was included in the package, and it wasn't. Should I have ticked this after all, if so I can try the same thing again if I can force it back into download mode again. (though as the yellow pane still shows in odin when connected I wonder if I can just go ahead anyway)
I have also been looking for rooting software and came across this
http://root-android.org/?version=Tablet&country=Samsung&ios=Galaxy+Tab+2&submit.x=63&submit.y=104
I am wondering if next time (assuming I ever get it working!) I would be better shelling out $30 and getting software to do it all for me - is this any good? has anyone used it or had reports about it? I wish I had seen this before I read "that it was almost impossible to brick the tab 2"
Also I would like to have root access on my S3 as well but wouldn't dream of risking this I don't think now
gbswales said:
I have an earlier thread here http://forum.xda-developers.com/showthread.php?t=2107600 but that is now buried on page 2 and might be missed by new readers. After a disastrous time trying to root my Galaxy Tab 5100 I did manage with the help of people here to flash the recommended stock ROM - however while the tablet goes through its boot sequenece with the aminated Samsung sign - it sticks when it gets to the plain Samsung logo and wont go further.
Odin reported that it installed OK and the tab rebooted as it should but only this far - not sure what I should try next to get my stock Samsung image back and working. One thing I didn't do was to tick repartition because the instructions only said to do this when a certain type of file was included in the package, and it wasn't. Should I have ticked this after all, if so I can try the same thing again if I can force it back into download mode again. (though as the yellow pane still shows in odin when connected I wonder if I can just go ahead anyway)
Click to expand...
Click to collapse
Have you tried a factory reset from recovery? If you've restored the stock ROM, then all you need to do is the factory reset to get things working again. Don't repartition unless you really need to.
gbswales said:
I have also been looking for rooting software and came across this
http://root-android.org/?version=Tablet&country=Samsung&ios=Galaxy+Tab+2&submit.x=63&submit.y=104
I am wondering if next time (assuming I ever get it working!) I would be better shelling out $30 and getting software to do it all for me - is this any good? has anyone used it or had reports about it? Also I would like to have root access on my S3 as well but wouldn't dream of risking this I don't think now
Click to expand...
Click to collapse
I can't see any reason you should spend that kind of money given how easy the CF-AutoRoot is. In fact, that product looks very shady to me. "Root Any Android Device"? Well, there's lots of devices out there that nobody's been able to root, or devices that take a lot of work. I can't believe there's a single app that'll work across every Android device with a single click.
Be careful, which stock ROM have you flashed? I would use this sequence
flash the stock ROM
then immediately
flash CWM recovery, use CWM recovery to wipe the data (wipe data/factory reset).
Then reboot
CWM ?
DigitalMD said:
Be careful, which stock ROM have you flashed? I would use this sequence
flash the stock ROM
then immediately
flash CWM recovery, use CWM recovery to wipe the data (wipe data/factory reset).
Then reboot
Click to expand...
Click to collapse
Well I followed one of the posted routes on this forum, downloading from a list of recommended files for each version, and it mentioned nothing about CWM which I know nothing about. I have to say that everyone's definition of "easy" on here - I find complicated and difficult - I know my way around windows but android seems much more complex. The only reason I wanted to have root in the first place was to be able to make a complete image back up that would make it easy to restore my device without having to re-download all my software and set up. I do it with windows all the time. To me "easy" is, download and install something - click go - done! Even getting the device to go into download mode in the first place is a very hit and miss affair (as others say on here too) clearly Samsung don't want you to do this.
The other problem is that while the tablet is in this state it wont turn off, just reboots itself when you do and the screen stays on - so unless you leave it plugged in 24/7 - I start each time with a flat battery that I have to recharge before I can try something else
This is the route I followed
DigitalMD said:
Be careful, which stock ROM have you flashed? I would use this sequence
flash the stock ROM
then immediately
flash CWM recovery, use CWM recovery to wipe the data (wipe data/factory reset).
Then reboot
Click to expand...
Click to collapse
I got this through earlier posts - the only thing I didn't do was to go into recovery and reset in step 2 because this simply wasn't possible - the device was stuck on the error message and no amount of button pressing did anything other than restart to the same screen. By this stage I couldn't even go back to check what version of android I was running - it would have been the latest jelly bean distributed to UK.
I also didn't check re-partition as in 6. because there was no pit file in the download
E. Restore to stock
THIS WILL WIPE YOUR DATA!
4.0.3 for p5100: https://hotfile.com/dl/155804946/76b...XALD9.rar.html
4.0.3 for p5110: http://www.hotfile.com/dl/159635395/...3_PEO.zip.html
4.0.4 for p5100: http://www.hotfile.com/dl/165065733/...1_SER.zip.html
4.0.4 for p5113: http://www.hotfile.com/dl/164415704/...5_XAR.zip.html
4.0.? for p5113: http://69.46.67.99/GT-P3113_XAR_1_20...ldcgx9tzmx.zip
4.0.4 for p3100: http://samsung-updates.com/fw/Samsun...3kdo3qe503.zip (PIT files: 16Gb p3100, 8GB p3100
Note: for more language options for stock ROM's for the tab 10, go here.
1. Unzip the downloaded ROM. If there is a file ending in .pit, skip to step 3
2. Reboot into recovery and select wipe data/factory reset.
3. Reboot into Download Mode.
4. Unzip/unrar the stock firmware
5. click PDA and find the stock file (PDA/PLATFORM file, the largest one).
6. Click PIT and open the .pit file you downloaded if one was included with your ROM. Check Re-Partition in ODIN
7. OPTIONAL: if you want to flash the bootloader and/or csc, you can select them as well. If you don't know what that means, you don't need to do it.
8. Click Start.
9. Enjoy!
Help please - this is where I am at the moment - some SIMPLE help needed please
I tried to install what I thought was the stock ROM - it appeared to install but wouldnt boot past the samsung screen. I now realise (a) that I may not have followed the full correct procedure and (b) may have downloaded the 5110 rom instead of the 5100 rom - silly mistake I know.
However reading all the guides I can find there doesnt seem to be a simple way I can find of restoring the standard un-rooted rom so that I can go back and try again. All of the things I can find seem to included downloading something onto the external card but cant do that as I cannot access it and don't have an external card reader.
What I can do now is
boot into download mode
connect to ODIN and see the yellow block
It will not boot normally past the samsung splash screen
and cannot connect to KIES in any mode (I do have the drivers installed and have connected before)
I also have no idea now what is installed on it because I cant get to the system to see!
Is there an easy way to install a stock samsung rom from this point? I don't mind if data is lost, I have nothing important on there and wouldnt mind re-installing apps as I had accumulated far too many anway - really I just want to get my tablet back the way it was from the factory but with the 4.2 jelly bean installed (though if it went back to an earlier version and I could update in Kies that would be ok too)
Can anyone give me simple instructions for doing this using just ODIN and my computer without involving the external card - please.
After that I will be looking for an equally easy way to root it again
I will credit you with a good answer if you can help -as well as appreciating it.
gbswales said:
I tried to install what I thought was the stock ROM - it appeared to install but wouldnt boot past the samsung screen. I now realise (a) that I may not have followed the full correct procedure and (b) may have downloaded the 5110 rom instead of the 5100 rom - silly mistake I know.
However reading all the guides I can find there doesnt seem to be a simple way I can find of restoring the standard un-rooted rom so that I can go back and try again. All of the things I can find seem to included downloading something onto the external card but cant do that as I cannot access it and don't have an external card reader.
What I can do now is
boot into download mode
connect to ODIN and see the yellow block
It will not boot normally past the samsung splash screen
and cannot connect to KIES in any mode (I do have the drivers installed and have connected before)
I also have no idea now what is installed on it because I cant get to the system to see!
Is there an easy way to install a stock samsung rom from this point? I don't mind if data is lost, I have nothing important on there and wouldnt mind re-installing apps as I had accumulated far too many anway - really I just want to get my tablet back the way it was from the factory but with the 4.2 jelly bean installed (though if it went back to an earlier version and I could update in Kies that would be ok too)
Can anyone give me simple instructions for doing this using just ODIN and my computer without involving the external card - please.
After that I will be looking for an equally easy way to root it again
I will credit you with a good answer if you can help -as well as appreciating it.
Click to expand...
Click to collapse
What you need to do is to download the stock ROM for your 5100.
Go to www.samfirmware.com and put "GT-5100" into the search box. You'll see a list of the stock firmware for your device. Pick the appropriate firmware for your country and click "download".
Start up ODIN. Click on the "PDA" button and open the firmware file you downloaded above.
Restart in downloader mode (power and volume up), and connect the tablet to your PC. ODIN should now show the device.
Make sure repartition is not checked, and click on "Start". When it finishes, you now have stock firmware installed.
Power off, then restart in recovery mode. (Hold power and volume down.)
Choose "wipe data/factory reset" by using the volume keys to move the highlight, then pressing the power button to select an entry.
Once it's finished booting, you should be back to normal.
Thanks K1MU for this information which at least looks clear - the only problem I have is when I put in the model etc when I get to country it offers me only 3 choices
UK (BTU) GB (O2) or GB (vodafaone)
My phone was purchased from Amazon and is unlocked so I am worried if these might lock me to a carrier which I wouldn't want
I wonder if BTU is the unlocked one as it doesn't sound like any provider I know - but I am not sure
will post on their forum as well
I think I am getting more and more muddled by the minute (sign of old age I fear) I realise now that I have a p5110 - wifi only and not p5100 3g and wifi.
This means in all probablilty I downloaded the correct rom in the first place. As I had not done the factory reset afterwards so tried that - it appeared to work ok but when I restarted it just played the samsung tune and moving image - then went to "Samsung" and stuck there as it was before.
I am downloading the p5110 wifi only rom from Sam's site - awful download programme they use which doesn't accept paypal even to sign up for faster downloading - I will then try following exactly what you have suggested and keep my fingers crossed
thank you
k1mu said:
What you need to do is to download the stock ROM for your 5100.
Go to www.samfirmware.com and put "GT-5100" into the search box. You'll see a list of the stock firmware for your device. Pick the appropriate firmware for your country and click "download".
Start up ODIN. Click on the "PDA" button and open the firmware file you downloaded above.
Restart in downloader mode (power and volume up), and connect the tablet to your PC. ODIN should now show the device.
Make sure repartition is not checked, and click on "Start". When it finishes, you now have stock firmware installed.
Power off, then restart in recovery mode. (Hold power and volume down.)
Choose "wipe data/factory reset" by using the volume keys to move the highlight, then pressing the power button to select an entry.
Once it's finished booting, you should be back to normal.
Click to expand...
Click to collapse
Although I thought it had got nowhere after wipe restore - when I turned it back the next day I arrived at the start up guide - admitedly it was 4.0.3 and in Portugese but after exploring settings and working out what to click i got it back to uk english - it has now connected to kies ok and is currently downloading the latest firmware - thanks partcularly to the last poster and to all others who helped - I will go through and thank you others too,
Point is now - once I have jelly bean can I get root access easily -without installing another custom rom - ahh well tomorrows problem

Stuck at Boot Logo After Flashing Firmware via ODIN

Nevermind fixed it. I am a dumbass lol I booted into stock recovery and factory reset, and now I am good to go.
Silicon Knight said:
Nevermind fixed it. I am a dumbass lol I booted into stock recovery and factory reset, and now I am good to go.
Click to expand...
Click to collapse
this happens buddy you just have to boot into recovery and do a factory reset and wipe cache and there will be no problem
HAPPY NEW YEAR
So I had the same issue it sounds like, tried to flash PhilZ recovery over Odin seemed fine I put the PhilZ file and superSU files on the device to continue through and now I am unable to get into recovery mode only download and my tab does not turn off, it sits on the Samsung Galaxy Tab 2 10.1 logo unless I hold the power then it turns off and then right back on again.
Any ideas? I cant seem to find anything
Does your device boot up completely or just sit at the Samsung bootscreen?
swrght13 said:
Does your device boot up completely or just sit at the Samsung bootscreen?
Click to expand...
Click to collapse
Just the boot screen, not even past the first logo
You must have missed a step. Try the process again using this video tutorial: http://www.youtube.com/watch?v=sO3y7JCqfc8
Follow the directions step by step.
This is actually the video I was using, but, I have tried again and I cant get it to boot into PhilZ. I am able to get to download screen so I have tried a different version as well, but after it gets the pass it disconnects to reboot and then never boots or reconnects until I put it into download and reconnect the device.
Weird. This is the way I installed Phil's touch. I had no issue with it. Make sure your usb is disconnected from your device before rebooting. On the p5113, to get into recovery, hold down power + volume-down, when you see first Samsung big-screen, release power button and continue to hold the volume-down button.
Sent from my GT-P5113 using XDA Premium 4 mobile app
That's what I've been doing and it does nothing. Device sits at that Samsung Galaxy Tab 2 10.1 screen. The only way I can turn it off is to plug it into my computer and restart it until the battery symbol comes up and disconnect. That's it.
Not sure what route to take now, but, it still connects to odin and after flashing the PDA to it, it disconnects.
Ok. Tell me. Are you rooted? Can you boot up to your home screen at all? You must be rooted in order to flash a custom recovery.
Sent from my P5113 using XDA Premium 4 app
Rooted, running CM 10.2 [4.3.1]
I didn't even get to that step, I was flashing philz recovery in order to backup before rooting. I was unable to boot anything except the download mode, no recovery mode to factory reset and not able to boot the actual system at all.
I ended up trying CWM and flashing that to the device through Odin and was able to open recovery mode after that and have since flashed Cyanogen to the device and have everything good to go.
I dont know what was wrong with philz, but, I tried multiple downloads of the version we need and none did anything.
Problem is solved, but, there's got to be something wrong with philz recovery for this device or my tablet just doesn't like philz.
Thanks for your suggestions though I appreciate your efforts!
No problem. I'm glad you found a way to fix it!

[Q] Bricked Tablet - see post for details

Here is the sequence of events:
Galaxy tab 2 10.1 with factory rom (wife's tablet)
Wife tells me that she keeps trying to complete the update everytime she gets prompted, but it always fails
Wife also tells me that she can't power off the tablet (she presses the power button, it shuts down, but then it starts up again)
I try the upgrade, get same result as wife
I try to reset the rom: I download what I think is the correct file, download Odin 1.85, and run it.
put tablet into download mode, attempt to use Odin to load new rom ***note, this is probably where I screwed up, as I am not sure i used the correct file. This is the file I used: PDA_HC31_EG01Ba_AP352081user_CP1033580_LTE20110704_0708.tar, which I found in a search on xda forums for my problem.
Odin reported failure. I tried again, same result.
I tried using KIES, using the Firmware upgrade and intitialisation (note that I must have UK version of KIEs, based on the spelling of initialisation--maybe that's a problem??/). I put in the model number, then the serial number if the tablet, get a message that GT-P5113 does not support initializing
tablet displays the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I try to put tablet back into download mode, but that doesn't work. Any suggestions on what to do at this point? Appreciate a step-by-step solution, if possible.
Thanks!
kevinkohut said:
Here is the sequence of events:
Galaxy tab 2 10.1 with factory rom (wife's tablet)
Wife tells me that she keeps trying to complete the update everytime she gets prompted, but it always fails
Wife also tells me that she can't power off the tablet (she presses the power button, it shuts down, but then it starts up again)
I try the upgrade, get same result as wife
I try to reset the rom: I download what I think is the correct file, download Odin 1.85, and run it.
put tablet into download mode, attempt to use Odin to load new rom ***note, this is probably where I screwed up, as I am not sure i used the correct file. This is the file I used: PDA_HC31_EG01Ba_AP352081user_CP1033580_LTE20110704_0708.tar, which I found in a search on xda forums for my problem.
Odin reported failure. I tried again, same result.
I tried using KIES, using the Firmware upgrade and intitialisation (note that I must have UK version of KIEs, based on the spelling of initialisation--maybe that's a problem??/). I put in the model number, then the serial number if the tablet, get a message that GT-P5113 does not support initializing
tablet displays the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I try to put tablet back into download mode, but that doesn't work. Any suggestions on what to do at this point? Appreciate a step-by-step solution, if possible.
Thanks!
Click to expand...
Click to collapse
Seems you flashed a wrong file.
Download another rom from http://live.samsung-updates.com/
and reflash with odin
Last week i tried to update my tab from 4.1.2 to 4.2.2 it hangup while flashing. Had to reset but then end up with firmware upgrade encountered blablabla. I just reflash within the blind screen without download mode and got it to work again
But don't I need to get the tablet into download mode first?
Rosli59564 said:
Seems you flashed a wrong file.
Download another rom from <<url.....>>
and reflash with odin
Click to expand...
Click to collapse
That makes sense, but how do I get the correct file to the tablet if I can't get the tablet into download mode?
kevinkohut said:
That makes sense, but how do I get the correct file to the tablet if I can't get the tablet into download mode?
Click to expand...
Click to collapse
If it's really a gt-p5113 then find the 1 for your country. If you're not sure your region code/csc then just download for any region.
You will know what i'm talking about if take a look at the given link
Please look at item 10 on my list
Rosli59564 said:
If it's really a gt-p5113 then find the 1 for your country. If you're not sure your region code/csc then just download for any region.
You will know what i'm talking about if take a look at the given link
Click to expand...
Click to collapse
I can't load ANY file to the tablet, as I CANNOT GET IT INTO DOWNLOAD MODE. I need to know how to force the tablet into download mode. Pressing POWER and VOLUME DOWN does not work. NOTHING HAPPENS.
Connect to PC on the screen "firmware upgrade encountered blablabl" Downloadmode on in Background, Odin can get access
If you are working with Odin, please kil ALL Samsung and KIES Programs and Services running in Background.
Hi for go to download mode you have to press power and volume up buttons
Sent from my GT-P5113 using XDA Premium 4 mobile app
Android-Andi said:
Connect to PC on the screen "firmware upgrade encountered blablabl" Downloadmode on in Background, Odin can get access
If you are working with Odin, please kil ALL Samsung and KIES Programs and Services running in Background.
Click to expand...
Click to collapse
I have tried this many times and Odin just fails. TWRP, CWM, Phil's touch all tried and failed. I have tried so many ROMs not sure I could list 'em all. Wanted to try SlimKat. But have this same problem, can't find the handle now, I only get the firmware upgrade encountered blah, blah. I'm just about ready to make confetti out of it! Can I get assistance with this problem, please. I don't care what ROM I have to run, I just need it to work...
Any solution to your problem?
Pp.
PanchoPlanet said:
Any solution to your problem?
Pp.
Click to expand...
Click to collapse
None as yet, I'm running out of real estate to search...
The rom you used in your op was probably for a data tab like sprint, att, Verizon, that is usually a brick result.
If you could factory reset you may have a chance but I doubt it without recovery or download mode.
Pp
You are faceing the "black screen of death" ("Firmware upgrade encountered an issue....").
Uninstall kies and reboot your pc.
Start odin.
Connect the tab running the black screen of death (BSOD).
Download mode running in background of BSOD so odin will detect your device.
Flash the correct firmware now and pray flashing the at&t rom didn't caused a hardbrick.
Send from OnePlus One using Tapatalk
Correct rom
I think that is exactly my problem. Last night I got Odin to run all the way through, it said pass but still no soap. I'm just about to list it for parts and at least minimize my loss.

Categories

Resources