Database Info

back to stock

wondering how to get back to stock on my Samsung galaxy tab 2 10.1 p5113. i have checked that firmware website but havent found any. and if i get back to stock can get further updates?

Use this
Trozzul said:
wondering how to get back to stock on my Samsung galaxy tab 2 10.1 p5113. i have checked that firmware website but havent found any. and if i get back to stock can get further updates?
Click to expand...
Click to collapse
Follow this
http://forum.xda-developers.com/showthread.php?t=1856532
Press thanks if I've helped

noahthedominator said:
Follow this
http://forum.xda-developers.com/showthread.php?t=1856532
Press thanks if I've helped
Click to expand...
Click to collapse
im sorta stuck on the finding the stock firmwares on the link it gave us, i am using a wifi tab not from verizon or any data plan also is this non modifed stock? can i get updates from samsungs ota?

Trozzul said:
im sorta stuck on the finding the stock firmwares on the link it gave us, i am using a wifi tab not from verizon or any data plan also is this non modifed stock? can i get updates from samsungs ota?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1704668
Thats the thread for the firmware.

noahthedominator said:
http://forum.xda-developers.com/showthread.php?t=1704668
Thats the thread for the firmware.
Click to expand...
Click to collapse
im sorry i ment i looked through that but i cant find the wifi firmware. Sorry for missleading thanks for replying

Trozzul said:
im sorry i ment i looked through that but i cant find the wifi firmware. Sorry for missleading thanks for replying
Click to expand...
Click to collapse
The first one is for wifi!!!!!!!! The first link is for the wifi gtab 2

noahthedominator said:
The first one is for wifi!!!!!!!! The first link is for the wifi gtab 2
Click to expand...
Click to collapse
P5113
P5113UECLK7 (4.1.1) - Cellular south November 2012 (Official)
PDA: P5113UECLK7
CSC: P5113XARCLK7
Date: 2012-11-30
Regions:
Download (delivered by SamMobile)
this is the first one.... isn't cellular south a service provider.....

Trozzul said:
P5113
P5113UECLK7 (4.1.1) - Cellular south November 2012 (Official)
PDA: P5113UECLK7
CSC: P5113XARCLK7
Date: 2012-11-30
Regions:
Download (delivered by SamMobile)
this is the first one.... isn't cellular south a service provider.....
Click to expand...
Click to collapse
Its basically is the United States version.:good:

[REF] GALAXY NOTE 3 (SM-N900/N900W8/N9005) GSM MODEM'S Collection (Odin/CWM)

All modems (radio/baseband) are OFFICIAL and for the SM-N900/N9005 only!!
You can post here your recommended modems for various region/location/ carrier etc.
Choosing right modem can make a huge difference as it affects reception, data speed, stability, battery life etc. Test them and then post here
Different parts of the World have different LETTER CODE (first 2 - XX, ZH, DX, ...) ,
Last 2 letters: I6 or J1 or ... tells you how old this modem is... higher letter, newer modem... simple as that...
BTW, you need to test them all if you want to know differences in reception or data speeds...
If you have a modem or request for a missing, please feel free to post here and I’ll add it (credit given).​Please use this Samsung Firmware checker to see what is your LETTER CODE
​​
CWM/TWRP (Custom Recovery) flashable MODEMS in post #3​​​​​
TIP of the day:
lambstone said:
Ok it worked.
If anyone else is having issues with the baseband not changing, do this.
Use Odin v3.04
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Flashing Guide
1. Download modem
2. Extract, open "......tar.md5" as PHONE and press START
3. Enjoy
​​
Odin flashable modems for Samsung Galaxy NOTE 3 - SM-N900​​​​​
DDUBMI3 - Download: <<< Dev-Host >>>
DDUBMI4 - Download: <<< Dev-Host >>>
DXUBMI1 - Download: <<< Dev-Host >>>
UBUBMI2 - Download: <<< Dev-Host >>>
XXUBMI2 - Download: <<< Dev-Host >>>
more coming soon...
​
CWM/TWRP (Custom Recovery) flashable MODEMS in post #3​​​​​​
Odin flashable modems for Samsung Galaxy NOTE 3 - SM-N9005​​​​​
XXUBMI6 - Download: <<< Dev-Host >>>
XXUBMJ1 - Download: <<< Dev-Host >>>
more coming soon....
​
Sources :
- samsung-updates
- sammobile​

Samsung Galaxy NOTE 3 - SM-N900W8
Odin flashable modems for Samsung Galaxy NOTE 3 - SM-N900W8​​​​​
coming soon....
​

Modems Collection [CWM/TWRP]
CWM/TWRP flashable modems for Samsung Galaxy NOTE 3 - SM-N900 ONLY!!​​​​​
DDUBMI3 - Download: <<< Dev-Host >>>
DDUBMI4 - Download: <<< Dev-Host >>>
DXUBMI1 - Download: <<< Dev-Host >>>
UBUBMI2 - Download: <<< Dev-Host >>>
XXUBMI2 - Download: <<< Dev-Host >>>
more coming soon...​
CWM/TWRP flashable modems for Samsung Galaxy NOTE 3 LTE - SM-N9005​
NEED TO BE TESTED ...​​​

Reserved #3

OP has been updated, more modems coming soon...
enjoy!

CWM MODEMS for N900 ONLY has been added to post #3
NOT TESTED YET, so please report how it went
enjoy!

Still looking for flash-able modems from the N900W8 for my N9005

@Class said:
Still looking for flash-able modems from the N900W8 for my N9005
Click to expand...
Click to collapse
same here

@Class said:
Still looking for flash-able modems from the N900W8 for my N9005
Click to expand...
Click to collapse
just so we are clear here... is it possible that a modem from, say, a tmobile phone (sm-n900t) would work just fine on a wind mobile phone (same bands used) (sm-n900w8)?
what about a modem off of a w8 from latin or south america? does the region they are from matter, or is it just the bands supported that really matter, and the phone's hardware itself?
i guess i'm wondering if, having a w8, can i flash basically any firmware without worrying about a brick, and the only worry would be simply wether or not it would connect up or work well...? or do i run the risk of really screwing up my phone for good if i flash the wrong region? or wrong model but still a snapdragon model? thanks

DjeMBeY said:
Odin flashable modems for Samsung Galaxy NOTE 3 - SM-N900W8​​​​​
coming soon....
​
Click to expand...
Click to collapse
can't wait looking for this I want to flash the latest on a custom rom
---------- Post added at 06:34 PM ---------- Previous post was at 06:33 PM ----------
asaqwert said:
just so we are clear here... is it possible that a modem from, say, a tmobile phone (sm-n900t) would work just fine on a wind mobile phone (same bands used) (sm-n900w8)?
what about a modem off of a w8 from latin or south america? does the region they are from matter, or is it just the bands supported that really matter, and the phone's hardware itself?
i guess i'm wondering if, having a w8, can i flash basically any firmware without worrying about a brick, and the only worry would be simply wether or not it would connect up or work well...? or do i run the risk of really screwing up my phone for good if i flash the wrong region? or wrong model but still a snapdragon model? thanks
Click to expand...
Click to collapse
well for me when I flashed omega.. which is n9005 I lost wifi, however lte worked and everything else ran flawlessly

Interesting....well I'm definitely going to wait until I hear more about it but that sure is promising.... might end up meaning that we will only need two forums...one for Snapdragon one for exynos....that would be great. Roms could then just be made with no modem included....
Hey I wonder though if that can be done why doesn't anyone do it? Habit from older phones or a good reason? I mean why build and compile different versions for different carriers etc if you could just post modems with a single rom (or two) and have people flash their own modem....?

Heres my dump of my modem. SM-N900W8 on Bell Mobility. N900W8VLUBMI5. This isnt a CWM Flashable zip.
http://d-h.st/lq3

Thanks worked.

KindaJackedForANerd said:
well for me when I flashed omega.. which is n9005 I lost wifi, however lte worked and everything else ran flawlessly
Click to expand...
Click to collapse
Flashing Custom ROM through Recovery on different models works fine but flashing incorrect modem can cause problems.

I'm kinda confuse with this, is the N900 different from the N900V ? . I have a Verizon Note 3 .

hey DjeMBeY how about you post the instructions on how to extract the modem files, to convert them into both Odin and TWRP flash-able files?
that way we can help you get all the modem files for the different versions of Note 3 and its large array of modems.
the SM-N900W8 already have released a full list of update ROMs from all over the word, over at SAMfirmware

AllGamer said:
hey DjeMBeY how about you post the instructions on how to extract the modem files, to convert them into both Odin and TWRP flash-able files?
that way we can help you get all the modem files for the different versions of Note 3 and its large array of modems.
the SM-N900W8 already have released a full list of update ROMs from all over the word, over at SAMfirmware
Click to expand...
Click to collapse
Yeah, good idea! I'm sooo busy ATM and it could help..
I just need modem.bin extracted from STOCK FW and compressed back as single file with correct name/model/version..
I'll repack it to tar.md5 and CWM ZIPs if possible.. I'm not sure if flashing through CWM will be possible on LTE versions! It is IMPOSSIBLE on S4 LTE (I9505) and it's a twin-brother so , we'll see...

Flashing with root (dd of=/dev/block/*p2) seems to work well.
I suspect recovery is basically the same process.

jeffrey1790 said:
Heres my dump of my modem. SM-N900W8 on Bell Mobility. N900W8VLUBMI5. This isnt a CWM Flashable zip.
http://d-h.st/lq3
Click to expand...
Click to collapse
how do i pack this and flash it to my phone?
i am trying to get my wind phone to work on bell's lte network
as it is, i have it working on the hspa+ network but the phone says 3g and the max download speeds i have seen yet was 16mbps on speedtest.net average was about 12-13 downtown and only 6 at my house (wind average is 4.5 downtown and 3.5-4 at my house)
btw my house is on the far end of town so i could see the companies not having quite the service down here as they would downtown....

DjeMBeY said:
Flashing Custom ROM through Recovery on different models works fine but flashing incorrect modem can cause problems.
Click to expand...
Click to collapse
Following your and soloilmeglio indications to flash modems with odin for SM-N9005 gives no results (again stock MI6 modem trying to flash MJ1). I tried different odin versions (1.85, 3.04, 3.09), no way. Flashed three times as indicated with no autoreboot tick, no way. Do you think that flashing MJ1 stock could solve the problem (I have X-note 2.0). Is this only a problem of mine or any other XDA forum member did have the same issue?

[Q] SamMobile ROM doesn't have LTE?

I restored using a ROM for my device taken from SamMobile. But I don't have the LTE option. What can I do to get it back?

Prosis said:
I restored using a ROM for my device taken from SamMobile. But I don't have the LTE option. What can I do to get it back?
Click to expand...
Click to collapse
Tell us which specific PHONE and FIRMWARE version. May be you flashed a firmware with wrong region/modem.

LS.xD said:
Tell us which specific PHONE and FIRMWARE version. May be you flashed a firmware with wrong region/modem.
Click to expand...
Click to collapse
It's the Samsung Galaxy S4 SGH-M919V. This is the one I flashed: 2014 September Canada (Vidéotron) (Black Edition) 4.4.2 M919VVLUFNH3 M919VYVLFNH3
Videotron is my carrier and "M919VVLUFNH3" is in my "About" section. The only thing I see that could be a hint is that it says "Enforcing SEPF_SGH-M919V_4.4.2_0032 Wed Oct 15 17:10:39 2014". Could that mean there was a update released after the ROM was released (September)?

[INFO] N9005XXUGBOD6 is available

Hello to everyone!!​I was looking for an official firmware and I found this. It has many changes with the OB6. I installed it and it is faster than OB6 (at least at me). Unfortunately it is available only for Germany T-Mobile. Soon I will give a mirror download link for everyone
Mirror: MEGA
Model SM-N9005
Model name GALAXY Note 3 LTE
Country Germany (T-Mobile)
Version Android 5.0
Changelist 4540543
Build date Thu, 16 Apr 2015 13:12:00 +0000
Product code DTM
PDA N9005XXUGBOD6
CSC N9005DTMGBOD3
Edit 1: It is available and for the Netherland T-Mobile
Thanks to @sirobelec for the mirror

t-shock said:
Hello to everyone!!​I was looking for an official firmware and I found this. It has many changes with the OB6. I installed it and it is faster than OB6 (at least at me). Unfortunately it is available only for Germany T-Mobile. Soon I will give a mirror download link for everyone
Mirror: Tomorrow
Model SM-N9005
Model name GALAXY Note 3 LTE
Country Germany (T-Mobile)
Version Android 5.0
Changelist 4540543
Build date Thu, 16 Apr 2015 13:12:00 +0000
Product code DTM
PDA N9005XXUGBOD6
CSC N9005DTMGBOD3
Edit 1: It is available and for the Netherland T-Mobile
Click to expand...
Click to collapse
Just did a bad flash and was going to Odin back to stock, and lookie do, what do I find in the General forum.
If it's carrier branded, so be it, I'll survive that...

sirobelec said:
Just did a bad flash and was going to Odin back to stock, and lookie do, what do I find in the General forum.
If it's carrier branded, so be it, I'll survive that...
Click to expand...
Click to collapse
I also had an issue with flashing it. After flashing the firmware, flash the pit and you will be ready. Just wipe data after that

t-shock said:
I also had an issue with flashing it. After flashing the firmware, flash the pit and you will be ready. Just wipe data after that
Click to expand...
Click to collapse
I'm downloading the Netherlands version (I presume you used the German one) and try without the .pit and wipe, if it doesn't work - then shall I apply the .pit.
Do these carrier branded firmwares include lots of bloatware?
Edit: Flashing right now, and uploading the Netherlands to MEGA.
https://mega.co.nz/#!Ixh3WbqK!7s-LmhcaKvsNe3gG0_ybkT-o75p42EF0XHpSPAvvcoM - here's the Mega link itself.

sirobelec said:
Do these carrier branded firmwares include lots of bloatware?
Click to expand...
Click to collapse
TNL has a fair bit of bloatware, but nearly all can be deleted. About 7-9, I believe. The My T-mobile app and Travel&Surf app are not relevant to the actual network functions (they're Dutch-only account apps) and can be safely deleted.
Should be a few other Dutch junk apps as well, such as scoupy and HRS hotels. If you find an app but you're not sure what it is, I can probably tell you. (And if not, I can ask the dev team.)
Oh, it does have a very annoying startup jingle. Mind the volume if you reboot at night
Sent From My Samsung Galaxy Note 3 N9005 Using Tapatalk

Need a PIT file please for flashing the german version. I have a Italien Note 3.

sirobelec said:
I'm downloading the Netherlands version (I presume you used the German one) and try without the .pit and wipe, if it doesn't work - then shall I apply the .pit.
Do these carrier branded firmwares include lots of bloatware?
Edit: Flashing right now, and uploading the Netherlands to MEGA.
https://mega.co.nz/#!Ixh3WbqK!7s-LmhcaKvsNe3gG0_ybkT-o75p42EF0XHpSPAvvcoM - here's the Mega link itself.
Click to expand...
Click to collapse
Can you please confirm if this is a no-wipe and did you need a pit file as well? I have BOB6, but Wi-Fi takes like 30 seconds just to turn on and it's driving me crazy I don't want to go back to defaults right now. Thank you.

KiretoX said:
Can you please confirm if this is a no-wipe and did you need a pit file as well? I have BOB6, but Wi-Fi takes like 30 seconds just to turn on and it's driving me crazy I don't want to go back to defaults right now. Thank you.
Click to expand...
Click to collapse
TNL is build from PHN, which is the same size as BTU. You shouldn't need a pitfile if you're on an Unbranded western EU rom.
It's non-wipe.
Sent From My Samsung Galaxy Note 3 N9005 Using Tapatalk

ShadowLea said:
TNL is build from PHN, which is the same size as BTU. You shouldn't need a pitfile if you're on an Unbranded western EU rom.
It's non-wipe.
Sent From My Samsung Galaxy Note 3 N9005 Using Tapatalk
Click to expand...
Click to collapse
Yes, I am on Poland unbranded BOB6 right now. Flashing TNL...
EDIT: Failed. Phone shows Volume size is too big 204800 < 409600
ODIN : Invalid ext4 image

KiretoX said:
Yes, I am on Poland unbranded BOB6 right now. Flashing TNL...
EDIT: Failed. Phone shows Volume size is too big 204800 < 409600
ODIN : Invalid ext4 imagte
Click to expand...
Click to collapse
So seems like Unbranded to Branded is a no go. Flashed back Poland Unbranded BOB6 and phone is now booting.

VoLTE
Does this ROM have VoLTE, like the previous version (OC3)? BOB6 doesn't, and some say Samsung opted to enable VoLTE only for some countries (for which OC3 was created).

what is the exact changelog?

Toxina said:
what is the exact changelog?
Click to expand...
Click to collapse
There are no changelogs unless it is OTA and there is little information provided.

Can someone upload the modem?

dbolivar said:
Does this ROM have VoLTE, like the previous version (OC3)? BOB6 doesn't, and some say Samsung opted to enable VoLTE only for some countries (for which OC3 was created).
Click to expand...
Click to collapse
T-Mobile NL doesn't support VoLTE yet, so no.
KiretoX said:
Yes, I am on Poland unbranded BOB6 right now. Flashing TNL...
EDIT: Failed. Phone shows Volume size is too big 204800 < 409600
ODIN : Invalid ext4 image
Click to expand...
Click to collapse
I said Unbranded Western EU ROM. XEO always has size issues with western ROMS, particularly DBT/BTU/PHN/XEF (which are basically all the same).

ShadowLea said:
T-Mobile NL doesn't support VoLTE yet, so no.
I said Unbranded Western EU ROM. XEO always has size issues with western ROMS, particularly DBT/BTU/PHN/XEF (which are basically all the same).
Click to expand...
Click to collapse
My phone's default is DBT (Germany), then flashed with the Unbranded 5.0 Poland as even to this date there is no released DBT 5.0 firmware. Anyway, no harm was done.

I am on Poland unbranded BOB6 5.0 right now.
If I intend to flash this directly with the PIT file, will I lose all my files?

Which PIT file should i use to upgrade from the Polish BOB6 to this? I've tried both PITs mentioned on this thread: http://forum.xda-developers.com/galaxy-note-3/general/finally-official-5-0-firmware-galaxy-t3029557 (page 114) to no avail.

What's new in this build? Anybody see visible changing? For example better working promixity sescor?

_GRIZZLY_ said:
What's new in this build? Anybody see visible changing? For example better working promixity sescor?
Click to expand...
Click to collapse
Separate "Mute" and "Do not disturb" mode. In mute, alarms still work and in do not disturb, even alarms are muted. Notable feature.
Sent from my iPad using Tapatalk

Firmware

If my samsung Galaxy A716U firmware is A716USQU4DUE3, what firmware can i update it to?

Hunter552 said:
If my samsung Galaxy A716U firmware is A716USQU4DUE3, what firmware can i update it to?
Click to expand...
Click to collapse
The latest available buildI can find for A716U is A716USQU6DVA2

Thank you, will this change my carrier form att to tmobile if i load the userdata file the has TMB in it?