Hi Guys, Thought id Share my experience with this here case!
I Purchased this case for only 9.95 Fast Shipping
http://www.ebay.com/itm/LG-Nexus-4-...872078?pt=PDA_Accessories&hash=item2ec4e5864e
The Case feels great in my hand. It is grippy...very grippy. The Silicone Rubber feels and smells great!
The Plastic 2nd Layer also fits securely on the device and adds a degree of protection for drops on the corners.
There is a lift off the front of the screen so placing the phone face down shall not yield any problems.
There is a built in kick stand. it feels a little wiggly if you tap on it while holding the device but not noticeable unless you OD on it like i just did.
I actually just dropped the phone right after putting the case on from about 3.5 feet no a mark or blemish.
The case is also very attractive to me I love the all black dark minimalist look.
All cutouts are perfect and no screen protector LIFT!!!
DEFINITELY A COMPARABLE CASE TO THE OTTERBOX COMMUTER(nonexistent for nexus 4) ...i actually love this case a little more than i did my otterbox on my sensation
Wireless Charging works but you have to remove the hard outer shell you can leave the silicon on.
Im not too good at writing review hopefully I helped someone!
GO FALCONS!! :victory::victory::victory::victory::victory:
Thanks for the review! A few questions:
How do the buttons feel compared to a naked N4 or, say, a Diztronic case?
Is the added thickness/weight very noticeable?
Is the kickstand practically useful?
Thanks!
I just ordered one but from a different seller and I'm hoping that it's the same quality as yours as it looks exactly the same.
Sent from my Transformer Prime TF201 using Tapatalk HD
ZeroCeII said:
Thanks for the review! A few questions:
How do the buttons feel compared to a naked N4 or, say, a Diztronic case?
Is the added thickness/weight very noticeable?
Is the kickstand practically useful?
Thanks!
Click to expand...
Click to collapse
The buttons are smooth but they can definitely be felt. They are rubber so it is very easy to press the power button no difficulty at all. I actually own the diztronic and the pressing of the power butting feels better with this case.
The case is actually very light VERY :good:. it is barely any thicker than the TPU diztronic
The stand is useful is you like to watch movies or basically prop your phone up. It does a great job holding the phone sturdily on the surface it is on. very easy to open and close.
Hope this helped!!
deltatux said:
I just ordered one but from a different seller and I'm hoping that it's the same quality as yours as it looks exactly the same.
Sent from my Transformer Prime TF201 using Tapatalk HD
Click to expand...
Click to collapse
Do you have a link for that? TS's ebay seller only ships within the US.
innumerabilis said:
Do you have a link for that? TS's ebay seller only ships within the US.
Click to expand...
Click to collapse
http://www.ebay.ca/itm/350678085892?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
deltatux
Thanks, but that seller excluded Singapore as well.
Shadowguy said:
The buttons are smooth but they can definitely be felt. They are rubber so it is very easy to press the power button no difficulty at all. I actually own the diztronic and the pressing of the power butting feels better with this case.
The case is actually very light VERY :good:. it is barely any thicker than the TPU diztronic
The stand is useful is you like to watch movies or basically prop your phone up. It does a great job holding the phone sturdily on the surface it is on. very easy to open and close.
Hope this helped!!
Click to expand...
Click to collapse
Very helpful, thanks! Think I'll pick one up and try it out.
innumerabilis said:
Thanks, but that seller excluded Singapore as well.
Click to expand...
Click to collapse
Hmmm... that sucks, it sucks that they excluded it. Try searching the Singapore version of eBay?
Sent from my Transformer Prime TF201 using Tapatalk HD
Cool let me know how you like it!
Wow, this case looks really tough, I'm sure it adds a lot of protection together with bulk. If I hadn't have this much cases I would buy this one too :good:
It really does!! I like the design....and it holds well with drops thinking about getting the red one so I can match! Lol
Just got mine in a few days ago and love it!
The kickstand feels much more sturdy than what I was expecting, and the added thickness of the case actually helps it lie more naturally in the hand, IMO. I've actually found the buttons to be much easier to press than either the Poetic bumper or naked, and the rugged design is striking yet minimalistic. Definitely worth the price of entry.
Sent from my Nexus 4 using xda app-developers app
Does the silicon part attract dust?
This case has a similar design, but the inner layer is made out of TPU instead of silicone.
http://www.handhelditems.com/dual-armor-composite-case-with-stand-google-nexus-white-p-199584.html
What do you guys think?
Related
Alright. So, impressions first.
I've used Seidio Active cases on all of my phones since my original Incredible (quite a few devices). I love them. It was a no-brainer to get one for my One X. I hadn't ever used one of the kickstand models, so this is a first for me.
First off, the case is great. Very well designed, feels really really good in the hand. It gives the physical buttons (power, volume) a better feeling, makes them easier to use. I know some people had issues with the power button being a little too recessed, so this should remedy the issue a little.
It looks great. I got the glossed white, and I have to say, if you got the white One X, this is definitely the way to go. Really accentuates the overall look of the device, matches nicely.
The case should definitely prevent a lot of damage from drops. The silicon layer allows you to put it down face first without it resting on the screen, and the hard shell gives it good protection on the edges and corners. It also lifts the phone off of the camera lens.
The kickstand. This is kind of meh, to be honest. It is advertised as a metal kickstand, but honestly it feels pretty flimsy. It does support the phone on its side, but you cannot set it up vertically (like you can with the Thunderbolt). I've honestly not used the kickstand much. I don't use my phone for watching stuff very often, and even less often do I need to rest it that way. It can't be charged while the kickstand is out since the charging port is covered.
Another gripe about the kickstand is that it puts a little bulge on the back of the case. You can't really tell on the site, but it juts out a little. Kind of awkward, kind of throws off the minimal look to it. Not a huge deal though. I did contact Seidio and they said they have no plans to develop the Active case without a kickstand for the One X. So it is what it is.
Overall, it is a great case. If you are looking for solid protection with minimal bulk, this is definitely for you. I was actually really surprised how thin the device stays with the case on. Thanks to the hard shell the case doesn't make it difficult to pocket, since the silicon layer isn't what contacts the inside of the pocket (if that is an issue for you).
I'd definitely say it is worth it. Some will love and use the kickstand probably, others will likely be indifferent. I could live without it. But you can't beat the look or the feel, or the peace of mind it brings. Recommended!
Pictures! Apologies for...the space sheets. And the various books on psychology. The general cleanliness of the background. Haha.
Okay, it won't let me upload them to here. Too big I guess. Idk. Here's a link to my public Dropbox folder with the pictures in it.
https://www.dropbox.com/sh/2mwqek85ez80rqn/OR8BfO1rlj
looks nice
tad thick for my taste but nice none the less
Hmm... I really like the Kickstand. I purchased the platinum version of the seidio surface case from best buy and it lacks the kickstand. Will probably return it and get the surface case with the kickstand instead. All in all, Thanks for the Pics!
I have really been considering this case. It seems really nice. The only thing that has me not wanting a case on this phone is I'm worried it will detract from the ergonomics of the screen. The lip around the screen looks like it will make it more difficult to use the edges of the screen.
Sent from my HTC One X using xda premium
dragunbayne said:
I have really been considering this case. It seems really nice. The only thing that has me not wanting a case on this phone is I'm worried it will detract from the ergonomics of the screen. The lip around the screen looks like it will make it more difficult to use the edges of the screen.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
I got both this one and the Surface case at the same time so I could compare them. I have to say that I absolutely love the Surface case, but was not a fan of the active with kickstand. The Active has that awkward bulge in the back where the kickstand is, and I just didn't like the look and fit on the phone. The Surface, in my opinion, is just about perfect. It fits great over my Zagg screen protector, and it is very minimalistic and i think it actually helps maintain the phone's natural good looks! If you haven't tried the Surface case, give it a try! ( There's a thread on here somewhere with pictures of the Surface case... I'll try to find it and post a link.)
Edit: here's the link -- http://forum.xda-developers.com/showthread.php?p=25979926
Sent from my Transformer Prime TF201 using xda premium
cbasse said:
I got both this one and the Surface case at the same time so I could compare them. I have to say that I absolutely love the Surface case, but was not a fan of the active with kickstand. The Active has that awkward bulge in the back where the kickstand is, and I just didn't like the look and fit on the phone. The Surface, in my opinion, is just about perfect. It fits great over my Zagg screen protector, and it is very minimalistic and i think it actually helps maintain the phone's natural good looks! If you haven't tried the Surface case, give it a try! ( There's a thread on here somewhere with pictures of the Surface case... I'll try to find it and post a link.)
Edit: here's the link -- http://forum.xda-developers.com/showthread.php?p=25979926
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
Thanks for the advice. It looks as though the surface would be better for me since it doesn't seem like it would have the issue I was worried about with the screen.
Sent from my HTC One X using xda premium
I get the surface cases for every phone I buy. I have to have a clip and the surface case is the best option for me. It doesn't add a lot of bulk but still feels protected. I was glad that Best Buy got the platinum case in for the HOX really quick. Identical to the surface case but 10 bucks cheaper.
Sent from my HTC One XL using XDA
Review of Active w/ kickstand
I've had my Active w/ kickstand for a couple of days. I really like the case. I got the blue version. The blue is darker and has a slight metallic tint. I think it looks better than the pictures seidio has posted online. The rubber skin makes the buttons easier to press, and has a great tactile feel. This is great for the power button, which usually took me a couple of tries without the case. I'd prefer the volumes weren't as easy to press, but not a big deal. The kickstand works well for me, but the charging port is at the bottom, when the kickstand is out. So you can't charge and use the kickstand at the same time. The edges of the screen are easy to use, unless you use the advanced setting in chrome that puts the menu button on the side. Also the lip, can interfere with your screen protector. I had to readjust mine to make sure it didn't line up with the edge of the lip, otherwise the lip tends to push the edge of the screen protector up.
Hope that helps, anyone considering this case.
Confused
http://www.amazon.com/Seidio-CSK3HT...LRRI/ref=sr_1_8?ie=UTF8&qid=1339456253&sr=8-8
On Amazon, Seidio claims that this case fits both the AT&T One X and the International One X. Does it indeed fit both, or just ours, or just the International? I need to buy a case, and I would prefer one with a kickstand. If anyone can tell me if the one on Amazon fits, that would be great. It would also be really helpful if you posted a link to a case for the AT&T One X that offers superior protection to the Seidio case, but also has a kickstand, but ideally I would like to order the Seidio for the AT&T One X. Sorry to be so demanding, but I won't take this phone out of my house until I get a case, and I really want to show it off at school
It does fit..i have the one for the international and it fits snuggly on my xl
Sent from my HTC One XL using XDA
Just bought this in black, the exoskeleton idea is cool. My adreama case always felt like it works scratch it when removing.
Hail Cobra!
I've always liked seidio's products. Especially their active line cases. the AT&T rep was trying to get me to buy their $50 POS hard case. I didn't, the plastic feel just isn't good for me. Plus also the seidio holster is a lot better.
I got the case in red. I think it looks great. The kickstand does feel a little cheap but it ain't bad. I can live with it When propped up, it does its job quite well. My only complaint about the case is that because the edges of the screen on this phone are not raised, the case rubs up against the edge of my screen protector and it keeps lifting it then I push it back down. I may have to try to find a screen protector that has some stickiness to it.
ChongoDroid said:
Just bought this in black, the exoskeleton idea is cool. My adreama case always felt like it works scratch it when removing.
Hail Cobra!
Click to expand...
Click to collapse
@ChongoDroid, where did you buy it from? Anyone has them locally in Vancouver?
shgadwa said:
I've always liked seidio's products. Especially their active line cases. the AT&T rep was trying to get me to buy their $50 POS hard case. I didn't, the plastic feel just isn't good for me. Plus also the seidio holster is a lot better.
I got the case in red. I think it looks great. The kickstand does feel a little cheap but it ain't bad. I can live with it When propped up, it does its job quite well. My only complaint about the case is that because the edges of the screen on this phone are not raised, the case rubs up against the edge of my screen protector and it keeps lifting it then I push it back down. I may have to try to find a screen protector that has some stickiness to it.
Click to expand...
Click to collapse
Zagg up the screen and it should stay down just fine.
Sent from my HTC One X using Tapatalk 2
nameanyone said:
@ChongoDroid, where did you buy it from? Anyone has them locally in Vancouver?
Click to expand...
Click to collapse
Unfortunately not, Amazon.ca was the best it got. Wireless wave has some gel cases and possibly even otterbox cases. These however are not anywhere in stores
Sent from my HTC One X using xda premium
pside15 said:
I get the surface cases for every phone I buy. I have to have a clip and the surface case is the best option for me. It doesn't add a lot of bulk but still feels protected. I was glad that Best Buy got the platinum case in for the HOX really quick. Identical to the surface case but 10 bucks cheaper.
Sent from my HTC One XL using XDA
Click to expand...
Click to collapse
One side note on the Surface is the fact that when using the kickstand, the USB port is underneath, preventing you from charging it at the same time
But still, it's the best fit for the looks of the phone and protects the camera so you don't have to worry about setting it down roughly. my 2 cents
Have the same case but in black. Seems like it will def protect the phone. Feels good, haven't used the kickstand yet but will hold the phone up. Fairly easy to install and remove. Thought about the Surface case but wanted a case just for when I'm in the garage or outside at the beach or something so went with some extra protection. Rest of the time just use the phone as is with a screen protector. Like the design of the phone so don't care to have a case on it all the time.
I just saw this case on Ebay...
ASUS Transformer TF700T Ultra Slim Leather Case Cover Protect for Black stand
You saw what?
Could you please be more specific
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
i believe he is talking about this
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=251131015077#ht_8237wt_1139
Case does look thin. Annoyingly, the video does not have the tablet in the case.
Price is also pretty good. i might order it just to try it out
i have the roocase which is truly detest. too bulky
coleburns said:
i believe he is talking about this
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=251131015077#ht_8237wt_1139
Case does look thin. Annoyingly, the video does not have the tablet in the case.
Price is also pretty good. i might order it just to try it out
i have the roocase which is truly detest. too bulky
Click to expand...
Click to collapse
Yes that's the one i'm taking about...
I ordered this on 8/7 and it has an expected ship date of 8/23-9/6
Still waiting definitely coming from HK but at this point I could probably buy something local for a bit more and have it a few more weeks before hand. This shipping is killing me but I knew it going in so this is just me ranting lol
Looks like the Sikai microfiber
the case finally arrived. Not the best, not the worst.
The case is very similar to the look and feel of ipad1 official Apple case. it is very thin, especially compared to my roocase which felt like a briefcase
The biggest issue with the case is attention to detail, especially round the buttons. They just haven't been cut out properly which is very frustrating as with a little more focus it could have been a great case. This is very noticeable around the for the power and volume buttons and the material (faux leather of whatever the **** it's called) sticks out
Also when the case is closed, you can see the flip is slightly misaligned with the rest of the case.
Anyway, it will replace my roocase as my everyday case as it's easier to carry and makes it look and feel lighter. Paid less that £10 so can't really complain
coleburns said:
the case finally arrived. Not the best, not the worst.
The case is very similar to the look and feel of ipad1 official Apple case. it is very thin, especially compared to my roocase which felt like a briefcase
The biggest issue with the case is attention to detail, especially round the buttons. They just haven't been cut out properly which is very frustrating as with a little more focus it could have been a great case. This is very noticeable around the for the power and volume buttons and the material (faux leather of whatever the **** it's called) sticks out
Also when the case is closed, you can see the flip is slightly misaligned with the rest of the case.
Anyway, it will replace my roocase as my everyday case as it's easier to carry and makes it look and feel lighter. Paid less that £10 so can't really complain
Click to expand...
Click to collapse
Can you post some pictures
Thanks!
Sikai-Slim-soft-silicone-cover-for-ASUS-Transformer-TF300-10-inch-Tablet - soryy but can not post links from ebay yet
What do you think about this kind of case?
It looks interesting, very slim - I'm just wonderinf if tf300 demensions are the same as tf700 - hopefully yes?
Here you go. Had to take them in a rush for sorry for quality.
I have obviously taken a blade to the cutouts as it was just driving me crazy that i couldn't get to the power and volume buttons easily. Those are the only real faults with the case
Sent from my Galaxy Nexus using xda premium
I've got one of these. It's very slim and looks OK but not what I was after. I'll sell it for a tenner + P&P (£) if anyone is interested?
sbdags said:
I've got one of these. It's very slim and looks OK but not what I was after. I'll sell it for a tenner + P&P (£) if anyone is interested?
Click to expand...
Click to collapse
what did you end up settling for?
coleburns said:
Here you go. Had to take them in a rush for sorry for quality.
I have obviously taken a blade to the cutouts as it was just driving me crazy that i couldn't get to the power and volume buttons easily. Those are the only real faults with the case
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thanks!
coleburns said:
what did you end up settling for?
Click to expand...
Click to collapse
Got the poetic slim for going out and use a tf201 transleeve for home.
So my flat black tpu case by Diztronic came today and let me tell you it is hands down better than anything out there and I could not be more pleased. I am comparing this to the Rearth slim case I was using and before that I also had the Ebay S line case for a couple days and while that case is also tpu, it is truly ghetto compared to this Diztronic. The fit is perfect and while buttons are covered there is still little effort needed to push them unlike many tpu cases. The feel of the case on the phone is also on the premium side and the matte black back does not attract fingerprints either. The other great feature about this case is the slightly raised lip going around the screen which is just right for anyone wanting to play music/put their phone face down. All of this is had with virtually no added bulk either. I highly recommend this case and know you will be happy with it.
myorks1127 said:
So my flat black tpu case by Diztronic came today and let me tell you it is hands down better than anything out there and I could not be more pleased. I am comparing this to the Rearth slim case I was using and before that I also had the Ebay S line case for a couple days and while that case is also tpu, it is truly ghetto compared to this Diztronic. The fit is perfect and while buttons are covered there is still little effort needed to push them unlike many tpu cases. The feel of the case on the phone is also on the premium side and the matte black back does not attract fingerprints either. The other great feature about this case is the slightly raised lip going around the screen which is just right for anyone wanting to play music/put their phone face down. All of this is had with virtually no added bulk either. I highly recommend this case and know you will be happy with it.
Click to expand...
Click to collapse
Pics?
There are pics on the website that are sufficient
those does not look good . Could you post pics of your N4 with that case?
myorks1127 said:
There are pics on the website that are sufficient
Click to expand...
Click to collapse
Um... well sure. But, part of the appeal of any product "review" is to see how it functions in the field--so to speak.
Here
myorks1127 said:
Here
Click to expand...
Click to collapse
It definitely looks better than the "S" TPU case, but does it offer more protection in your opinion.
It seems from your pics the lips on the front are higher than the ones on the "S"?
How good is the fit? would you say it's tight? Does the case come off easily?
Looks good, might still purchase this, although it looks exactly the same as the I-Blason case I have on my N4 already.
Hows the call quality? People complained about the official N4 bumper ruining the microphone quality so I'm wondering if it happens with this too.
I have one of these on order myself.
Would you say the Diztronic is significantly better than the Ringke Rearth Slim case? I've got the Ringke case and it doesn't fit as tight as it could around the volume rocker, too much play for my liking. Also my girlfriend hates how the four corners stick up a little from the screen (to protect the screen if its face down) she says they poke her in the ear on phone calls... Wish I had bought two of the Diztronic cases now
OverTheBelow said:
Hows the call quality? People complained about the official N4 bumper ruining the microphone quality so I'm wondering if it happens with this too.
I have one of these on order myself.
Click to expand...
Click to collapse
+1
I don't have a case at all and I have to position the phone in a certain position on my face for anyone to hear me as it is. If a case or bumper further negates from the call quality I am going to have to pass. Even though I already ordered this and it should be here soon.
1. The call quality is not affected I already had two calls with the case on and it sounds great.
2. The lip is raised a bit more than the S case but not overly done, it will not bother you at all
3. This case feels very good on the phone, it is easy to get off it your actually trying to take it off other that that there is no annoying flex from the tpu or anything like the cheap ones (S case)
4. This is much better that the rearth slim because having this on gives me the feeling of better protecting just by how it feels in the hand and protects the entire bezel which a slim case does not do.
I may order the Diztronic shell case when that come out next week too
I think the stock bumper is stupid anyways
Haven't tried any other case for the nexus 4.but this diztronic case is easily the highest quality tpu I've ever used... Feels great. Love it.
Sent from my Nexus 4 using xda premium
djkinetic said:
Looks good, might still purchase this, although it looks exactly the same as the I-Blason case I have on my N4 already.
Click to expand...
Click to collapse
it's definitely not the same as the i-blason case. I have two i-blason and the diztronic. the diztronic is sooo much better. i used to use their case on my gnex. very good quality.
Got my case yesterday. It fits nicely, has a good feel and looks pretty good too. Doesn't really add much bulk. The seams on 2 corners on the other hand seem a bit shoddy and looks like it might peel away over time. Curious to know if anyone else's case is like that too. Will contact Diztronic and see what they say.
I'm debating whether I should purchase this case in black or the smoke color
Sent from my Nexus 4 using xda premium
Just received mine as well, and YES THIS IS THE BEST CASE OUT THERE FOR THE N4 IMO
in every aspect, design, feel, protection this case is definitely the best, glad I bought this case.
Just got one. Great looking case and real nice feel. My XtremeGuard screen protector peels a bit on the corners. Any suggestions on screen protectors that wouldn't have this issue?
FatalityBoyZahy said:
I'm debating whether I should purchase this case in black or the smoke color
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I would get the black one, I also thought about the smoke color since it allows you to see the nexus logo on the back which is pretty attractive. But the Distronic logo kinda overlayed the LG logo and that's a no-no for me. But since Distronic has a no-hassle free return policy, you can always return it if you're not satisfied with your purchase.
First let me say I think this is the best overall case for the nexus 4 hands down and I ordered pretty much every other case off amazon. We would all love to use the nexus naked or with a bumper but we also know how fragile this phone is you probably break it or fear breaking it the whole time.
I say this case is the best for these reasons design, cost, and protection. First design, the main thing that stands out about this case it has hard edges when on case feels slick and firm. The whole case has a sparkle effect pretty cool. I absolutely love the white but the black is very nice also my gf loves it. The only flaw in design is probably the power and volume buttons are cut out and case does have a little thickness so can be hard to push buttons sometimes. This case does add to size but keeps nexus 4 shape exactly.
Cost was 5.21 plus 2 dollar shipping so that for me already puts it as number 1 since all others cost more. To me if you had to pick one case this would be it.
Protection to me cannot get any better than this. I don't know how but the case in your hand feels soft and bends like every other case but when on feels solid. Hard to put into words but I trust this case.
Now the only other cases that came close where the distronic (which is a little slimmer and buttons are not cut out. Also back is matte). I blazon was good to very similar to distronic minus the matte back. The mercury is just a tad thicker than these but you really don't feel it.
The other cases like the rearth to me is just a cheap piece of plastic not worth 10 bucks. There is a distronic hard shell that was pretty nice its like the rearth but done right. This would be my second choice if you really want ultra slim. Does not protect whole phone but good enough.
Here are some pics I took today this case is awesome. Comes in a ton of colors.
Sent from my Nexus 4 using Tapatalk 2
Kind of wished I bought a black one. The case is excellent.
Sent from my Trinity powered Nexus 4
Sweet the mercury pearl case is my all time fave on each phone I've owned that they make one for. I'm in for one. Does it push up on the screen protector and make it bubble?
Question, is the case a solid colour? or does it have sparkles/glitter like previous mercury tpu cases?
thanks
Fataldesain said:
First let me say I think this is the best overall case for the nexus 4 hands down and I ordered pretty much every other case off amazon. We would all love to use the nexus naked or with a bumper but we also know how fragile this phone is you probably break it or fear breaking it the whole time.
I say this case is the best for these reasons design, cost, and protection. First design, the main thing that stands out about this case it has hard edges when on case feels slick and firm. The whole case has a sparkle effect pretty cool. I absolutely love the white but the black is very nice also my gf loves it. The only flaw in design is probably the power and volume buttons are cut out and case does have a little thickness so can be hard to push buttons sometimes. This case does add to size but keeps nexus 4 shape exactly.
Cost was 5.21 plus 2 dollar shipping so that for me already puts it as number 1 since all others cost more. To me if you had to pick one case this would be it.
Protection to me cannot get any better than this. I don't know how but the case in your hand feels soft and bends like every other case but when on feels solid. Hard to put into words but I trust this case.
Now the only other cases that came close where the distronic (which is a little slimmer and buttons are not cut out. Also back is matte). I blazon was good to very similar to distronic minus the matte back. The mercury is just a tad thicker than these but you really don't feel it.
The other cases like the rearth to me is just a cheap piece of plastic not worth 10 bucks. There is a distronic hard shell that was pretty nice its like the rearth but done right. This would be my second choice if you really want ultra slim. Does not protect whole phone but good enough.
Here are some pics I took today this case is awesome. Comes in a ton of colors.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
LINXC88 said:
Question, is the case a solid colour? or does it have sparkles/glitter like previous mercury tpu cases?
thanks
Click to expand...
Click to collapse
I zoomed the black one, it's got sparkles.
Hey none in ebay, it's usually where I get them from. Directly from korean vendors.. Where are these amazon I assume?
How thick is the case? Is the black case super shiny?
seojuhwan said:
How thick is the case? Is the black case super shiny?
Click to expand...
Click to collapse
This one is not to thick but thicker than others on amazon just bit. But also this is the only one that keeps nexus 4 shape so it feels good in hand. Black is shiny not super though I suggest white as it has a gloss on it and does not get dirty. I'm two weeks on white still looks brand new and its been all over.
I'm not gonna lie I don't like the black but my gf does which good because I would not give her the white. All of them have a sparkle effect black shows it more.
Sent from my Nexus 4 using Tapatalk 2
clockcycle said:
Sweet the mercury pearl case is my all time fave on each phone I've owned that they make one for. I'm in for one. Does it push up on the screen protector and make it bubble?
Click to expand...
Click to collapse
Depends which one you have I have the Xtremeguard the one you have to use water to apply. If center it you should be fine. But this case goes over the edges well so I would not worry about it.
Sent from my Nexus 4 using Tapatalk 2
Thanks OP! Was waiting for this case to appear. I had these for my Nexus S and Galaxy Nexus; by far my favorite case.
Yeah, waiting for eBay sellers to sell them. Shipping to Canada is $9+....
aa_chow said:
Thanks OP! Was waiting for this case to appear. I had these for my Nexus S and Galaxy Nexus; by far my favorite case.
Yeah, waiting for eBay sellers to sell them. Shipping to Canada is $9+....
Click to expand...
Click to collapse
Only down side with most ebay vendors, is the 14-21 day delivery from korea.
Fataldesain said:
Depends which one you have I have the Xtremeguard the one you have to use water to apply. If center it you should be fine. But this case goes over the edges well so I would not worry about it.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Yea, I was afraid they all would have sparkles. This case seems to be made for girls. Does the white show that much sparkle?
aa_chow said:
Thanks OP! Was waiting for this case to appear. I had these for my Nexus S and Galaxy Nexus; by far my favorite case.
Yeah, waiting for eBay sellers to sell them. Shipping to Canada is $9+....
Click to expand...
Click to collapse
There was some discrepancy between the shipping price on amazon vs the price stated on the Mercury storefront shipping information page. I emailed them about that and they quoted shipping for me in Ottawa at $7.35. They said they would refund me the $2.13 difference in shipping after the fact. :good: I know it's not too much, but it's good to know they're an honest customer-oriented company.
MrMinh said:
Yea, I was afraid they all would have sparkles. This case seems to be made for girls. Does the white show that much sparkle?
Click to expand...
Click to collapse
Is had these my macho man phones. Its more like "pearl" then sparkles or glittery.. No one but you knows or can really see it.
I'm really digging the white... The LGnex already has plenty of sparkle but oh well i guess
Would anyone with this case mind taking a picture of the micro-usb port area with the case on?
I have a bunch of 6 ft micro usb cables that I like to use because of the length. However, these cables have a lot of excess plastic around the connector so I'm just wondering if they'll be compatible or not.
Available in the UK £6.89
http://www.amazon.co.uk/Mercury-Fle.../ref=sr_1_148?ie=UTF8&qid=1359917461&sr=8-148
How does the Mercury compare to the S-Line?
http://www.ebay.co.uk/itm/360530979...eName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
If I'm the kind of guy who drops his phone like, once a week, should I guess this. Trying to searh for the best option since I just ordered a nexus 4.
I currently have a samsung S2X with a Trident Aegis case that I really liek for protection and such.
Also, still not sure if I will put a screen protector. Is the Nexus 4 screen tough anough not to? Not a fan of the "rubery" feeling they give but its better than a scratched screen.
Got mine. Here's my opinion. It makes the n4 more fatty. I'm not a fan of the strange edges, preferred the smoother more rounded edges on my s3 and iphone4 versions. It's very front lippy, it pushes my skinomi skin and causes it to wrinkle/ bubble/ peel.
Good protection. Excellent quality and material. Cut out perfect. Nice hold/ grip. Great colors.
Took it off and put my nillkin back on.
Sent from my Nexus 4 using Tapatalk
Did I receive the same case? The Mercury tpu case I got for my Nexus4 looks nice, does add a little bit more bulk than the Diztronic, but one giant problem. It is slippery as hell. The gloss on it is not a sticky gloss, but more of a smooth slippy gloss. It won't stick to any surfaces, and IMO actually makes the phone a little more slippery to hold than when it's bare, since the entire case is made of this stuff. The only time it will be grippy is if your hands are slightly moist or hot enough to leave a steamy fingerprint lol. Not only that, the cutouts make the buttons very hard to press (due to the thickness of the case and shallow-ness of the buttons). The power button is actually kind of ok if you use your fingertip, but it's very hard to press the volume button.
Diztronic tpu owns that crap, u mad bro
Just got my Incipio dualpro midnight blue case from NewEgg ($15).
Thought I would upload a few pics for anyone interested and give my two cents.
I chose this case because of the two layers = better protection. The outer layer is smooth, and the areas that aren't covered by the hard outer plastic are smooth as well, thus it'll go in and out of pockets reasonably well.
The inner plastic is harder than I expected, but I've never used a case on any of my phones in 6 years
The inner layer didn't seem to want to come out of the outer layer that easily so I didn't force it. I just pushed the phone into the whole case. It went in easy enough. After it was on the phone the outer hard layer peeled off easily for easy removal of the phone.
All the holes line up perfect. However the USB-C Port hole is just wide enough for the cable shipped with the phone thus some adapters I have won't fit.
Of course the buttons are now harder to press. Some reviews said it was very hard, they aren't IF you press the buttons squarely straight on, but if you squeeze the phone to push the buttons then they seem very hard. So, it's more of an angle thing when pushing the buttons.
Most of the case doesn't flex/move when you squeeze the phone, but the area where the buttons are does as there's no hard plastic in that area. So a screen protector needs to be just slightly into the black bezel on the side, about 0.5mm imo. I won't be using a screen protector....
I wasn't sure about the color until I seen a review of the same case for the Note 8 on YouTube. It's a nice dark blue with a slight shine at an angle. From a distance it looks black. It looks much better than the pictures on Amazon or NewEgg.
Personally I don't think it adds that much thickness but it certainly isn't the slimmest case possible but I'll take the 10 foot drop protection instead! Hey, it's still smaller that my Moto X Pure
I can see it will collect dust and stuff around the edges, and like I've read elsewhere, it's probably wise to put a micro fiber cloth on the back of the phone inside the case so that any grit that gets in there won't scratch up the back..... If you want to go that far.
Almost forgot..... The all important effect on signal. I read one reviewer say it dampened signal noticeable. Not in my case. I actually seem to have gotten an improvement. I was usually sitting at -96dBm and now it looks stable at -93dBm or better. I did notice when testing signal that how I held the phone affected the signal..... So who knows.... :laugh:
If anyone has questions feel free to ask.
I have the smoke clear incipio and love it. Paired with my iq shield screen protector, im set. I buy incipio for everything
I've had this one in black since I got the phone and the Tudia Glost and I always come back to this one. Best case for this phone in my opinion.
Sent from my PH-1 using Tapatalk
If you use the 360 camera more often like me then this case is what you need, and you don't have to take your case off to attach the camera. I have Tudia case bought from Amazon and it's a very good case if you don't have the camera.
DUEDUE Essential PH-1 Case, Heavy Duty 3 in 1 Case Hybrid Hard PC Cover Soft TPU Bumper Shockproof Anti-Scratch Full Body Protective Cases for Essential Phone PH-1, Black https://www.amazon.com/dp/B07C4T64LM/ref=cm_sw_r_cp_apa_RHWxBbEB73C24
I just got the same midnight blue case today, and it is very nice. I wasn't quite sure what the color would look like since it's advertised as being irridescent, but there's no sparkle to it at all, which I appreciate. I also have Incipio's smoke TPU case, which is nice, but a horrible greasy fingerprint magnet, and I have the Poetic carbon fiber case, which is a great size and feels great in the hand, but it's kind of cheesy looking, in my opinion. I will agree that the inner layer of the DualPro is stiff. My wife has had DualPro cases on her phones for years, and they've all had a very soft rubber inner liner with easy to press buttons. I don't know why they changed that for the Essential case. I'm probably going to slit the buttons with a sharp knife. That's always helped on other stiff cases.
Saaber said:
I will agree that the inner layer of the DualPro is stiff. My wife has had DualPro cases on her phones for years, and they've all had a very soft rubber inner liner with easy to press buttons. I don't know why they changed that for the Essential case. I'm probably going to slit the buttons with a sharp knife. That's always helped on other stiff cases.
Click to expand...
Click to collapse
Don't cut the buttons. I took off the TPU and worked the buttons with my thumbs for a few minutes and they are significantly softer.
Sent from my PH-1 using XDA Labs
I just got this Dualpro blue case for my essential phone and i love it! Thanks to the OP for the pictures it made me choose the blue color. It looks much much better than what they show before you buy the case. It also provides excellent protection. The only thing i don't like is that the side buttons are a bit stiff but i guess they will soften up the more i use them. Overall i recommend this dualpro case.
sickred said:
I just got this Dualpro blue case for my essential phone and i love it! Thanks to the OP for the pictures it made me choose the blue color. It looks much much better than what they show before you buy the case. It also provides excellent protection. The only thing i don't like is that the side buttons are a bit stiff but i guess they will soften up the more i use them. Overall i recommend this dualpro case.
Click to expand...
Click to collapse
The pics on the web for the midnight blue are truly horrible representations.
Take the TPU off the phone and really massage/push/bend the buttons on the case for a few minutes.... That'll soften them up!
Sent from my PH-1 using XDA Labs
The blue is very very close to Black. I would have chosen that color if they didn't make Black. I like the contrast between the Black and the White
https://imgur.com/a/Idy8iR1
954wrecker said:
The blue is very very close to Black. I would have chosen that color if they didn't make Black. I like the contrast between the Black and the White
https://imgur.com/a/Idy8iR1
Click to expand...
Click to collapse
I wanted the black as well but the price went up drastically right after the Amazon sale then it went out of stock and I couldn't find one.... Just after I got the blue Rakuten had the black for the same price. ?
I like the contrast of yours as well!
Sent from my PH-1 using XDA Labs
Charles7 said:
I wanted the black as well but the price went up drastically right after the Amazon sale then it went out of stock and I couldn't find one.... Just after I got the blue Rakuten had the black for the same price. ?
I like the contrast of yours as well!
Sent from my PH-1 using XDA Labs
Click to expand...
Click to collapse
I've had this Incipio on every phone I've owned that they supported. This is the most I've ever paid for the case, normally they are $5 or $10 off Amazon or eBay. I had to pay almost $20 for this one on Amazon. I sold 2 of the 3 essential I got from prime day so I basically got the phone, USB C PD car charger, and case for free anyways.
954wrecker said:
I've had this Incipio on every phone I've owned that they supported. This is the most I've ever paid for the case, normally they are $5 or $10 off Amazon or eBay. I had to pay almost $20 for this one on Amazon. I sold 2 of the 3 essential I got from prime day so I basically got the phone, USB C PD car charger, and case for free anyways.
Click to expand...
Click to collapse
I should have picked up a couple more phones.... Wasn't thinking!
Sent from my PH-1 using XDA Labs
Yeah, if I knew I'd like the device I'd have bought two or three. As it stands I like the one I have..... a lot.
Nick N said:
I've had this one in black since I got the phone and the Tudia Glost and I always come back to this one. Best case for this phone in my opinion.
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
Thanks, had to decide between the Tudia and the Incipio model and I will now be going for the Incipio case!
Just got my essential phone and ordered the incipio dualpro. Any recommendations for glass protectors that would suit the incipio dualpro case? I intend to use loca for the installation. Thank in advance
All, recently bought this phone during Prime Day. Too good of a deal to miss! It looks beautiful but very wary of it staying that way so based on your various experiences what would you say is the best slimline case? The Incipio looks good but does add quite a bit of bulk to the phone...
fraxos said:
All, recently bought this phone during Prime Day. Too good of a deal to miss! It looks beautiful but very wary of it staying that way so based on your various experiences what would you say is the best slimline case? The Incipio looks good but does add quite a bit of bulk to the phone...
Click to expand...
Click to collapse
this screen seems extremely fragile based on videos on youtube, posts on reddit and xda etc. For a phone that hasn't sold too well, it seems like there's a lot of broken screens out there. This made me decide to go for the incipio dualpro, hopefully with the additional protection, i'll be able to keep the screen intact!
bellick said:
this screen seems extremely fragile based on videos on youtube, posts on reddit and xda etc. For a phone that hasn't sold too well, it seems like there's a lot of broken screens out there. This made me decide to go for the incipio dualpro, hopefully with the additional protection, i'll be able to keep the screen intact!
Click to expand...
Click to collapse
I'm not sure what people are doing to their phones. I have a cheap tpu case and a plastic screen protector.