WiFi stopped working after flashing resurrection remix Rom - Galaxy Note 10.1 Q&A, Help & Troubleshooting

Hi,
So I got my first problem while flashing today, have played with roms and things on my s3 a few times and dispute being a noob never had any bad experiences.
Earlier today I decided to root my note 10.1 gt-n8010 (uk) which also went fine and no problems, I then decided to try a custom Rom after I wasn't that impressed with the ota jelly bean 4.1.1 update and flashed resurrection Rom with the jelly bean 4.1.2 via cwm to see how that stacked up. However on the first time I ran it I noticed I couldn't connect to my WiFi anymore, I rebooted my note to see if that would help but it didn't.
I can get into the WiFi menu ok and fill in my WiFi code ok, but them just get a message saying 'failed to connect to WiFi'
So has anyone else had this problem or know of fix for it because as you can imagine is quite annoying, if there is nothing I guess I have to flash another Rom?
Thanks in advance guy's, I appreciate any advice

I would suggest flashing CyanogenMod nightly, it has the latest Adndroid version 4.2.1 and it has very few bugs.

Suggest wipe and flash .
Redemption works UK wiFi .
jje

Related

bluetooth issues

I installed the slimbean 4.3 ROM a free days ago and I've been experiencing some Bluetooth issues. It will randomly close, and the only way I can get the Bluetooth to restart is to reboot the phone.
now, correct me of I'm wrong please, but Bluetooth is controlled by the modern, so I'll want to maybe flash another compatible modern?
I'm using the latest version of TWRP as my recovery.
It's a known issue with 4.3 roms. You'll just have to wait until if and when the devs figure it out.
Almighty then... thanks for the reply
eachitandi said:
I installed the slimbean 4.3 ROM a free days ago and I've been experiencing some Bluetooth issues. It will randomly close, and the only way I can get the Bluetooth to restart is to reboot the phone.
now, correct me of I'm wrong please, but Bluetooth is controlled by the modern, so I'll want to maybe flash another compatible modern?
I'm using the latest version of TWRP as my recovery.
Click to expand...
Click to collapse
I have similar problem with CM 10.2 and an earlier Rom as well ... kinda learned to live with it.

[Q] Roaming Problem after fleshed MiUi Rom

Hi, I had been fleshed miui latest rom today using CWM recovery.
Then, I just fleshed back to Official Samsung Jellybean 4.1.2.
But problem started.
I saw the notification bar and it shows little triangle on.
It was roaming.
I tried flesh back to miui and again fleshed to official jellybean.
But, still problem does not resolved.
I tried factory reset, but still...
Does any one have solution of this problem?
Seriously, I need to call and text all day...

XT925 - Wifi not working after Custom Rom install (but bluetooth works?)

So I'm new to rooting and flashing custom roms on android devices. This also shows that I'm new because I forgot to make a backup of my stock system before moving forward, hence this problem.
So I currently have CM 10.2 flashed on my phone and so far I can't get the wifi to work. My bluetooth works perfectly fine (I've read that if one fails usually the other should too), so I don't know what to do.
At this point I'm sure i'm stuck because I've flashed a few different roms already to see if i can fix it (10.0, 10.1, 10.2, and hacker's aosp 4.4) but the wifi isn't working in either so I stuck to the rom that had the fewest bugs.
What's weird was that it was working when I had 4.4 flashed, but when i found it too buggy and flashed CM 10.2, now it doesn't work.
Anyone else have this problem? I guess I can live with it for a while until maybe I purchase a new phone.
Thanks
di3zelherbert said:
So I'm new to rooting and flashing custom roms on android devices. This also shows that I'm new because I forgot to make a backup of my stock system before moving forward, hence this problem.
So I currently have CM 10.2 flashed on my phone and so far I can't get the wifi to work. My bluetooth works perfectly fine (I've read that if one fails usually the other should too), so I don't know what to do.
At this point I'm sure i'm stuck because I've flashed a few different roms already to see if i can fix it (10.0, 10.1, 10.2, and hacker's aosp 4.4) but the wifi isn't working in either so I stuck to the rom that had the fewest bugs.
What's weird was that it was working when I had 4.4 flashed, but when i found it too buggy and flashed CM 10.2, now it doesn't work.
Anyone else have this problem? I guess I can live with it for a while until maybe I purchase a new phone.
Thanks
Click to expand...
Click to collapse
Did you flash 10.2 directly over 4.4 without wiping system data and both caches?
Sent from my XT926 using Tapatalk
koftheworld said:
Did you flash 10.2 directly over 4.4 without wiping system data and both caches?
Sent from my XT926 using Tapatalk
Click to expand...
Click to collapse
The first time, no. I thought I may have installed 4.4 incorrectly so after installing 10.2 i tried flashing 4.4 again, but I did wipe the caches, system, data and dalvik caches the second time going back after reading in this forum how to flash over a custom rom. But then seeing that the bugs were still there, i wiped again and went back to 10.2 and I've been there for a day now.
Missed Wifi
I'm facing the same trouble , same conditions.
Solved
zirig said:
I'm facing the same trouble , same conditions.
Click to expand...
Click to collapse
This will solve !! http://forum.xda-developers.com/showthread.php?p=47415109&posted=1#post47415109
thanks for xXLuHXx
zirig said:
This will solve !! http://forum.xda-developers.com/showthread.php?p=47415109&posted=1#post47415109
thanks for xXLuHXx
Click to expand...
Click to collapse
That worked! Thank you!

HTC One S doesn't connect to WiFi in Cyanogenmod 10.2 20131115-NIGHTLY

Hi everybody,
I decided to go back to Cyanogenmod, because i had some issues with the ROM I used before. First I flashed the CM 10.1.3 stable, everything worked fine, but I couldn't connect to any WiFi. So i tried flashing the nightly 10.2 10.2 2013111 over the Updates in the preferences. Still, i couldn't connect to any WiFi. I tried it two more times with full wipes and flashing the nightly over my Recovery, but couldn't make it work.
All these times i flashed the boot.img after flashing the nightly. I don't really know what to do anymore and thought anyone might have an idea for me?!
I didn't have any major issues until today, so i don't know what Information you might need to help me, so please tell me if I should say something more about the system or how I flashed it etc.
Thanks in Advance!
Edit: Same Problem with CM11...
Edit 2: Tried to flash the Bubba Kernel, because i read something about it...now i can't even turn the wifi on. -.-

[Q] Losing Network Constantly - Latest CM Nightly Build

Hello!
I was using the SungSonic ROM for almost a year now and I decided to change it today. So I flashed a CyanogenMod Nightly build for the P3100 This morning.
It booted up fine, and there were no issues in the beginning.
But then it started disconnecting calls randomly. Like, Someone calls, The phone rings for a second and boom! It shows a missed call.
I figured rebooting it would fix it but it made my problem only worse.
It now barely shows any Network service at all. If it is there, only for about 20s before it goes back off.
Is there any way to fix it without flashing another ROM? I like CyanogenMod and plus, its for my mother and I prefer keeping it simple.
Also, keep in mind that my Tab does not get recognised on any PC with any Cable I could find.
So, I am stuck with PhilZ Recovery for the P3100.
If the problem can be fixed via Flashing a new Mode/Baseband then please, give me a .zip for only the modem and not the whole ROM.
Thank You for Reading and I will hope you guys help me out.
Regards,
Shinichi Reshima
Always do a nandroid B/U before you flash so if you run into a problem like this you can go back. CM nightlys are not always stable, and sometimes you can't use them unless you have the base stable version of that ROM already installed. Must try and install the base version of the build, it may fix your problem. I run CM11 by Android Andi with no issues and no nightlys.
Pp.

Categories

Resources