Related
version : 1.0
Stock wifi driver
MOD EDIT: Links Removed
-More perfomance
-New driver wifi ..
-More perfomance
-Less battery consumption!:victory:
-Set low priority of scan when wifi is conected !
Instructions:
Go for cwm
Mount system
Install zip from sdcard
Click to expand...
Click to collapse
Warning : tested in white kernel no tested in other kernels yet
PS 2: if u have problems for install try this...modified script
confirmed kernels :
white kernel : work !
kuro kernel : no work !
savie kernel : no work
Try it later...
Sent from my GT-S5360 using xda app-developers app
hope ...that step by step cm get unbugged.......nice i liked
It's a bit faster compared to the old one...
Sent from my GT-S5360 using xda premium
Will try!!Thanks sir Whitexp!I am very respect you and your work...
Thanks also pressed!:fingers-crossed::fingers-crossed::fingers-crossed:
Thanks whitexp
I WHICH ROM I WILL WORK CM7,CM9
bY
------------------------------------------------SOMKLL-------------------------------------------------
What is this basically?! btw mr whitexp hope your vacation is over and u got back to cm7 project kidding dude take your time!! Come up with a stable hw acceleration if possible:thumbup:
Sent from my GT-S5360 using xda app-developers app
humaid.locastic said:
What is this basically?! btw mr whitexp hope your vacation is over and u got back to cm7 project kidding dude take your time!! Come up with a stable hw acceleration if possible:thumbup:
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
modified driver wifi !
What does it do?
Sent from my GT-S5360 using xda app-developers app
@whitexp thnx a lot man!!! good work :good:
whitexp said:
modified driver wifi !
Click to expand...
Click to collapse
hello....that driver is working good streaming and browsing is faster....
can i push it in another device? with cm7.2?
desalesouche said:
hello....that driver is working good streaming and browsing is faster....
can i push it in another device? with cm7.2?
Click to expand...
Click to collapse
no
only galaxy y or devices using bcm4330 !
okay... i'll try it sir...
Sent from my Nokia 3310 with SMS
Testing on kurotsugi kernel.. Will report back in 10 mins coz gotta backup first.. Thank anyway
EDIT: not working with kurotsugi's kuro kernel
Hiy bro.. Ur thean its work.... But in my case after flash wifi not work .so i have to manualy install the module.. Then reboot... After rebpot its work. Im on 1
Ur kernel 1.3.0 hyperion rom
Sent from my GT-S5360 using xda app-developers app
Its only for cm7,cm9 or have can install on other rom?
EliTSamsunG said:
Its only for cm7,cm9 or have can install on other rom?
Click to expand...
Click to collapse
I install it in hyperion and its working...
Sent from my GT-S5360 using xda app-developers app
vincz27 said:
I install it in hyperion and its working...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Bro did you install it on latest hyperion build? with default kernel or did you change kernel first?
In Stock ROM UHLF1 with White Kernel 1.3.0 not working.
Today, samsung officially release new 4.1.2 Jelly Bean OFFICIAL ROM firmware for galaxy S advance.
Is it possible any modder could port it to i9003?
I think it is same hardware except the mhz of the phone but maybe we could port this stock rom to I9003.
Any ideas?
Yes its possible. Even roms from other family, they can port it. But its not what they prioritize. After finishing Kernel 3 then i believe new ROMS everyday will come out.
FYI, galaxy S advance specs are totally different from our phone i9003.
porting from it will be meaningless.
galaxy s official ics should be port to our sl
Sent from my GT-I9003 using xda premium
maybe we can get it from galaxy ace plus
Sent from my GT-I9001 using xda app-developers app
Ezekiel1998 said:
maybe we can get it from galaxy ace plus
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
No. None of the other Samsung devices have the same specifications as our i9003. There is also no official ICS for Galaxy S.
Any ROM can be ported to our device till the ROM has the same DPI as our device for example dhiru ported the stock ICS ROM from galaxy s2 to galaxy s 19000
Sent from my GT-I9300 using xda premium
BassBlaster said:
No. None of the other Samsung devices have the same specifications as our i9003. There is also no official ICS for Galaxy S.
Click to expand...
Click to collapse
I think we can just left them dream about what they want to dream...
explaining technical stuff they won't accept it and won't understand it.
They will just think that porting will be very EASY
droopyar said:
Today, samsung officially release new 4.1.2 Jelly Bean OFFICIAL ROM firmware for galaxy S advance.
Is it possible any modder could port it to i9003?
I think it is same hardware except the mhz of the phone but maybe we could port this stock rom to I9003.
Any ideas?
Click to expand...
Click to collapse
Actually I and nikhil18 were working on such a project but because of absence of my PC I had to leave the project we had made quite progress.
Sent from my GT-I9100 using xda app-developers app
swapnilraj said:
Actually I and nikhil18 were working on such a project but because of absence of my PC I had to leave the project we had made quite progress.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Which project btw ??
Sent from my GT-I9003 using xda app-developers app
simratcs said:
Which project btw ??
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Porting the stock ICS ROM from galaxy s2 to our device
Sent from my GT-I9300 using xda premium
nikhil18 said:
Porting the stock ICS ROM from galaxy s2 to our device
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
can u port Official JB from galaxy s2 too?
Mamica said:
can u port Official JB from galaxy s2 too?
Click to expand...
Click to collapse
i am not an expert in porting when i had ported the ics rom from s2 it had booted it showed that android is upgrading but that thing took place very fast and it rebooted and when i checked the logcat it showed many errors swapnilraj was helping me in porting but his comp broke and we left the port
nikhil18 said:
Porting the stock ICS ROM from galaxy s2 to our device
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
coooll :good:
nikhil18 said:
i am not an expert in porting when i had ported the ics rom from s2 it had booted it showed that android is upgrading but that thing took place very fast and it rebooted and when i checked the logcat it showed many errors swapnilraj was helping me in porting but his comp broke and we left the port
Click to expand...
Click to collapse
That's brilliant!
Mamica said:
can u port Official JB from galaxy s2 too?
Click to expand...
Click to collapse
I guess it is possible I might try if I get some assistance and time since my computer is fixed now
Sent from my GT-I9100 using xda
swapnilraj said:
I guess it is possible I might try if I get some assistance and time since my computer is fixed now
Sent from my GT-I9100 using xda
Click to expand...
Click to collapse
wOOOww nicee
Nice topic !
Need help ?
I can teach you how to analyze the port
Set it to false the first Starter
Give the links you want and I can make tests
Lolation can you try to port the jellybean ROM from the galaxy s2
Sent from my GT-I9300 using xda premium
If someone is going to start a port count me in, I would love to help.
Sent from my GT-I9100 using xda app-developers app
please i need help finding a stable jelly bean rom for my galaxy sl with no bugs , and instructions to flash it. i registred in this forum precisely for asking you to help me please and thank you.
i just get my galaxy sl its on froyo 2.2 .
There is currently no stable jelly bean rom for our phone. Neither we have ics stable ROM.
Stay with gb if you want stable ROM.
Sent from my GT-I9003 using xda app-developers app
crk1995 said:
There is currently no stable jelly bean rom for our phone. Neither we have ics stable ROM.
Stay with gb if you want stable ROM.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Man theres some JB stable roms like Cm10 by Iosconosciuto or Xgamerz by lolation both are smooth and stable for daily driver. Give it a try!!.
Sent from my GT-I9003 using xda premium
acuicultor said:
Man theres some JB stable roms like Cm10 by Iosconosciuto or Xgamerz by lolation both are smooth and stable for daily driver. Give it a try!!.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
Stable rom are those which has no bugs. And i don't feel there is any such rom.
Sent from my GT-I9003 using xda app-developers app
crk1995 said:
Stable rom are those which has no bugs. And i don't feel there is any such rom.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Just give a try and you see that those roms have only minor bugs and they are totally stable.
Maybe you have to learn what is a stable rom in terms of android development.
Sent from my GT-I9003 using xda premium
acuicultor said:
Just give a try and you see that those roms have only minor bugs and they are totally stable.
Maybe you have to learn what is a stable rom in terms of android development.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
Sorry man you won.
Just visit http://forum.xda-developers.com/showthread.php?p=39191284
Sent from my GT-I9003 using xda app-developers app
this will help
http://forum.xda-developers.com/showthread.php?p=39191284
i have recently started using it...it has a great battery life and seems quite stable..sometimes lags but still the best at the moment. :good:
crk1995 said:
Sorry man you won.
Just visit http://forum.xda-developers.com/showthread.php?p=39191284
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
acuicultor said:
Just give a try and you see that those roms have only minor bugs and they are totally stable.
Maybe you have to learn what is a stable rom in terms of android development.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
Hi, i'm new. I have installed Cm10 by Iosconosciuto, but Wifi doesn't work. Any suggestion?
Wifi works perfectly in that rom even tethering. Try to reflash again the rom without skipping any step and you'll have working wifi for sure.
Good luck!!
Sent from my GT-I9003 using xda premium
Thank for your answer acuicultor.
I tried to reflash but is the same thing. The Wifi works only after pressing "100000000000000" times on "Connect".
acuicultor said:
Man theres some JB stable roms like Cm10 by Iosconosciuto or Xgamerz by lolation both are smooth and stable for daily driver. Give it a try!!.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
Is there any thread with detailed instructions on how to install these roms. I am currently on XXKPQ.
Sent from my GT-I9003 using xda app-developers app
Ciccioper4 said:
Thank for your answer acuicultor.
I tried to reflash but is the same thing. The Wifi works only after pressing "100000000000000" times on "Connect".
Click to expand...
Click to collapse
You did fresh installation of kpe/lf2/cm10? For me doing this all works fine.
Hope it helps.
Sent from my GT-I9003 using xda premium
Now I installed the [ROM CUSTOM][4.1.2][i9003] Like S4 v1.0.1 (Powered by loSconoscuito) [27/04/13], all works fine except the Wifi.
I followed this steps:
On CM10 Alpha 3 and all other basic Froyo, Gingerbread, ICS, JB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
- Mounts and Storage > Format /System
- Like S4 in recovery (remove battery after flach kernel if bootlop recovery)
- Like S4 in recovery
- Wip Cache and Dalvik Cache
The wifi issue is a known issue in CM10, I think in the xgamer rom by lolation the issue was solved.
cm-10-20130427-UNOFFICIAL-galaxysl
Is this rom cm-10-20130427-UNOFFICIAL-galaxysl.zip stable??
I m currently on jb 4.1.2 nd baseband version I9003XXKB1 by team remics.
Everything us grt bt battery drains much faster plz suggest me a best rom?
And also the steps for installing it?
Try like s4 by lolation its very smooth. If you want best battery life try slim bean
Sent from my GT-I9003 using xda app-developers app
Thanks to everyone for answering. With other ROM's is the same problem. When i'm trying to connect to the Wifi i have this messages:"Connecting" after " Obtaining IP address" after "Saved" and after "Connecting"....ecc...After 1 hour: "Connected" :good:
Is my i9003 the problem? Or maybe the kernel?
hey out there,
i think evereybody in this forum knows that the Samsung Galaxy SII+ (I9150p) has no notificationLED.
As a former HTC user, i loved the notificationLED!!!!
For now i use the App NoLED, but it sucks much akku an is still bugy!
so i started seacing arround and found the mod BLN and the app ButtonLED
But for both you need a Kernel witch is supporting this.
so here my question: Is anybody out there, who can build such a kernel ???
I'am willing to help as much as i can!!! (but it wont be much! couse i don't have programing skills)
Love and peace
H0bi
H0bi said:
hey out there,
i think evereybody in this forum knows that the Samsung Galaxy SII+ (I9150p) has no notificationLED.
As a former HTC user, i loved the notificationLED!!!!
For now i use the App NoLED, but it sucks much akku an is still bugy!
so i started seacing arround and found the mod BLN and the app ButtonLED
But for both you need a Kernel witch is supporting this.
so here my question: Is anybody out there, who can build such a kernel ???
I'am willing to help as much as i can!!! (but it wont be much! couse i don't have programing skills)
Love and peace
H0bi
Click to expand...
Click to collapse
My kernel will have BLN control but needs testing. I'm having a bunch of errors compiling because i don't know the device codename of GT-I9105P
for example
S Avance = janice
Nexus 4 = mako
Galaxy Nexus = maguro
GT-I9105P = ???
this would be awesome!!! thx for the fast awnser !
found this in another treat! device codename should be : "s2vep"
H0bi said:
this would be awesome!!! thx for the fast awnser !
found this in another treat! device codename should be : "s2vep"
Click to expand...
Click to collapse
Yes it's the codename! Thank you
Sent from my GT-I9070 using Tapatalk 4 Beta
KINGbabasula said:
My kernel will have BLN control but needs testing. I'm having a bunch of errors compiling because i don't know the device codename of GT-I9105P
for example
S Avance = janice
Nexus 4 = mako
Galaxy Nexus = maguro
GT-I9105P = ???
Click to expand...
Click to collapse
Are you building only for the P version?
Sent from my GT-I9105 using xda app-developers app
corduroy84 said:
Are you building only for the P version?
Sent from my GT-I9105 using xda app-developers app
Click to expand...
Click to collapse
Yes for now. My friend owns that model. Maybe later will build for i9105
Sent from my GT-I9070 using Tapatalk 4 Beta
KINGbabasula said:
Yes for now. My friend owns that model. Maybe later will build for i9105
Sent from my GT-I9070 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Ok, mate. Just in case, the codename for i9105 is s2ve
Wondering if there's a lot of difference between the P and non-P because the discontinued Cyan port that skullface made for the P works on my phone.
Sent from my GT-I9105 using xda app-developers app
corduroy84 said:
Ok, mate. Just in case, the codename for i9105 is s2ve
Wondering if there's a lot of difference between the P and non-P because the discontinued Cyan port that skullface made for the P works on my phone.
Sent from my GT-I9105 using xda app-developers app
Click to expand...
Click to collapse
I9070 roms work on i9070p just changing a folder and losing nfc. You have the same but reverse for s2 plus. It works because the difference is just nfc files to load nfc module. I9105 doesn't care about that files so having them or non having them is the same
Sent from my GT-I9070 using Tapatalk 4 Beta
KINGbabasula said:
I9070 roms work on i9070p just changing a folder and losing nfc. You have the same but reverse for s2 plus. It works because the difference is just nfc files to load nfc module. I9105 doesn't care about that files so having them or non having them is the same
Sent from my GT-I9070 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Ah, ok. so that clears the big question mark. Thanks
Sent from my GT-I9105 using xda app-developers app
KINGbabasula said:
My kernel will have BLN control but needs testing. I'm having a bunch of errors compiling because i don't know the device codename of GT-I9105P
for example
S Avance = janice
Nexus 4 = mako
Galaxy Nexus = maguro
GT-I9105P = ???
Click to expand...
Click to collapse
What else will your built support?
And tell me if you need someone to test this
Sent from my GT-I9105P using xda app-developers app
H0bi said:
What else will your built support?
And tell me if you need someone to test this
Sent from my GT-I9105P using xda app-developers app
Click to expand...
Click to collapse
Yes i will need tester thank you. i will support overclock and i will add sio scheduler and pegasusQ and hotplug governor
Good Luck King.
Sent from my GT-I9105 using xda app-developers app
There aresome Deodexed kernels available. Is there a way to modify the stock kernel Deodexed , so it can allow buttonled activation with screen off?
propably works. check
http://forum.xda-developers.com/showthread.php?t=2542917
Just wanted to ask, if the announced kernel has ever been released?
Hey guys.. can someone tell me whether our core support usb otg function or not?? Plz help... I want to connect a pen drive to my core... is it possible?? If yes, then how??
Sent from my GT-I8262 using xda app-developers app
abhishek.cheeku024 said:
Hey guys.. can someone tell me whether our core support usb otg function or not?? Plz help... I want to connect a pen drive to my core... is it possible?? If yes, then how??
Sent from my GT-I8262 using xda app-developers app
Click to expand...
Click to collapse
Sorry bro, no OTG support for our core yet, neither a custom kernel for OTG ...
Sent from my GT-I8262 using XDA Premium 4 mobile app
Damn
Sent from my GT-I8262 using xda app-developers app
i think our hardware not supports otg
Sent from my GT-I8262 using XDA Premium 4 mobile app
Akshay7273 said:
i think our hardware not supports otg
Sent from my GT-I8262 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hardware need not. Its the kernel that supports it.
androvista said:
Hardware need not. Its the kernel that supports it.
Click to expand...
Click to collapse
Yeah this^
Its all about kernel, hope that Samsung makes a custom kernel for us :sly:
Sent from my GT-I8262 using XDA Premium 4 mobile app
CoreGuy said:
Yeah this^
Its all about kernel, hope that Samsung makes a custom kernel for us :sly:
Sent from my GT-I8262 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If samsung will , then wont be called a custom kernel
androvista said:
If samsung will , then wont be called a custom kernel
Click to expand...
Click to collapse
I mean "customize" our stock kernel. :sly:
Sent from my GT-I8262 using XDA Premium 4 mobile app
There is an app that enables usb otg.
"USB Host Check"
https://play.google.com/store/apps/details?id=org.tauruslabs.usbhostcheck
You can try it
DarkThanos said:
There is an app that enables usb otg.
"USB Host Check"
https://play.google.com/store/apps/details?id=org.tauruslabs.usbhostcheck
You can try it
Click to expand...
Click to collapse
It just checks it's functionality, not enables it.
usb host check
abhishek.cheeku024 said:
Hey guys.. can someone tell me whether our core support usb otg function or not?? Plz help... I want to connect a pen drive to my core... is it possible?? If yes, then how??
Sent from my GT-I8262 using xda app-developers app
Click to expand...
Click to collapse
someone in this forum had posted a link for usb host check app.
it works for my rooted phone of the same model. but i didn't test with a pen drive cos i don't have otg pen drive.
after clicking fix in that app it says usb host is enabled.
so i do no what brand of pendrive will support my device