The problem is that after dialing a long pause, and call hangs up. It happens in 50% of the calls, and almost always when unlocking screen and immediately dialed. After first-second non-success calls- all other calls dialing normally (until turn off the screen).
Tried to change ROM, radios, kernels... Nothing help :crying:
How solve the problem?
increase min frequency and screen off frequency use kernel tuner/ system tuner
the only reason i can come up is either of the above is low
ganeshp said:
increase min frequency and screen off frequency use kernel tuner/ system tuner
the only reason i can come up is either of the above is low
Click to expand...
Click to collapse
Thanks!
I don't change this values in all ROM's what i try.
Will try to increase.
alex6600 said:
The problem is that after dialing a long pause, and call hangs up. It happens in 50% of the calls, and almost always when unlocking screen and immediately dialed. After first-second non-success calls- all other calls dialing normally (until turn off the screen).
Tried to change ROM, radios, kernels... Nothing help :crying:
How solve the problem?
Click to expand...
Click to collapse
I have the same problem. increasing min frequency and screen frequency does not help ...
Are there any ideas?
MasterMI4 said:
I have the same problem. increasing min frequency and screen frequency does not help ...
Are there any ideas?
Click to expand...
Click to collapse
I Try Elegansia, Arhd, One s ported ROM. And all stock roms.
Also try to encrese min freq, and screen off freq.
Nothing help.
And im out of ideas....
With Faux kernel less hangs up.. But it still exist.
Latest radio also did not help.
Any ideas?
Related
I am having a problem with my screen staying on long enough to unlock it. It also happens when in a call and I need to push a number. When I push power to unlock the screen, it only stays on for a fraction of a second then goes out. The bottom row of buttons stays light and will vibrate if i push them but nothing happens. It will do this over and over until finally it lets me unlock the phone. Also when I am on a call and remove the phone from my ear the screen does the same exact thing. Stays on only for a fraction of a second and so on........... This is my third G2X and my first one did this as well. I don't use any kind of lock screen app such as widget locker and when I do try it, it still does the same thing. Anyone have any Ideas???
Are you using SetCPU? I had a similar issue when I set my "screen off profile" in SetCPU to 216 max and 216 min with a priority of 100. I changed it to 312 max 216 min. Now no issues.
Battery seems about the same.
jcbofkc said:
Are you using SetCPU? I had a similar issue when I set my "screen off profile" in SetCPU to 216 max and 216 min with a priority of 100. I changed it to 312 max 216 min. Now no issues.
Battery seems about the same.
Click to expand...
Click to collapse
I do, and I use the same profile you mentioned. I am going to switch it now and try that. Thanks for your quick help!!
(Edit) Yes, that seems to be the culprit. I froze SetCPU for now and problem solved. Now I will change the settings to 312-216. Thanks Again
Happy to help. I am new to this android stuff, but I am beginning to figure things out through trial and error.
Mine are
general
1000max 216min
screen off
216/216
Running same settings as OP. Really love the extra battery life with the screen off profile.
The only problem I have with running that profile on screen off is sometimes when I get a call it takes too long for the phone to "wake up" and I end up missing the call. However since i adjusted it to min 600 (something) it hasn't been an issue.
dreggs said:
The only problem I have with running that profile on screen off is sometimes when I get a call it takes too long for the phone to "wake up" and I end up missing the call. However since i adjusted it to min 600 (something) it hasn't been an issue.
Click to expand...
Click to collapse
Same here. I also added an In Call profile so that when the screen turns off during a call it doesnt lower the CPU speed.
So my brothers and I all experience this on our Sensations since beginning to use ARHD in late November.
Ranging anywhere from once a day to once a week, we will get this issue where our phone goes into a lock state, but will not exit. It doesn't matter what battery level the phone is at. The phone is quite clearly on, but the screen won't wake, no buttons will respond. The only solution is to remove the battery and reboot.
Anyone run into this as well?
Does it seem to happen at a certain time? After opening a certain app?
Does sound odd though.
The only certainty I can say is that it happens when no applications are open and the screen goes into lock mode. It also happens regardless of the launcher being used (I use FX, my brother uses HTC Rosie, the other uses Go).
gotpriest said:
So my brothers and I all experience this on our Sensations since beginning to use ARHD in late November.
Ranging anywhere from once a day to once a week, we will get this issue where our phone goes into a lock state, but will not exit. It doesn't matter what battery level the phone is at. The phone is quite clearly on, but the screen won't wake, no buttons will respond. The only solution is to remove the battery and reboot.
Anyone run into this as well?
Click to expand...
Click to collapse
+1 I have this issue too...I lowered my overclock and it's been working fine since
Sent From My HTC Sensation 4G
I assume that is performed through SetCPU? Or Daemon.
In Daemon, there's only four options, Sleep and Wake Max, Sleep and Wake Min - how did you fix yours?
Anyone offer a tip on this?
I don't have SetCPU on my phone (looks like it was replaced?)
Don't want to bork my phone, just wondering how to dial down the overclock slightly to prevent this hard crash.
Thanks
ARHD has Daemon Tools I think, with this you can reduce your overclock.
However my suggestion would be to increase the Maximum sleep CPU speed. [Sleep Max]
I can't remember but I think be default it is at ~440MHz, increase it by around 600MHz and see if that fixes the problem. If so you can reduce it gradually to save battery, stopping if the problem redevelops.
Thankee very much!
I have a similar issue with ARHD 3.6.11, but it happens only if I use the camera app. It may or may not be immediately on taking pictures, but seems to happen only when camera app is in memory. I have not changed any undervolting or overclocking settings.
Any ideas?
tk_xda said:
I have a similar issue with ARHD 3.6.11, but it happens only if I use the camera app. It may or may not be immediately on taking pictures, but seems to happen only when camera app is in memory. I have not changed any undervolting or overclocking settings.
Any ideas?
Click to expand...
Click to collapse
If it happens when you press the power button to turn the screen off while you are using the camera app, it is a known problem (of faux's kernel, that comes out of the box for ARHD).
To solve you have to flash Bricked kernel. Or stay on faux and live with that.
Grandelama said:
If it happens when you press the power button to turn the screen off while you are using the camera app, it is a known problem (of faux's kernel, that comes out of the box for ARHD).
To solve you have to flash Bricked kernel. Or stay on faux and live with that.
Click to expand...
Click to collapse
Does this particular known issue apply if the screen turns off on its own due to inactivity time? What about if camera app is in background?
Does faux kernal need a camera fix similar to the one for bricked?
Hey
Im using ICS KANGY11 - Matr1x 15 - LiveOC 120% - lulzactive
when a call gets in
first the there is a vibration with black screen
after a few seconds the ringtone start still black screen
after a few seconds more the screen with the pic and answer option finally appear
could be a governor thing ?
since usually the call gets in while phone sleep
any ideas how to solve
AM i The only one noticed that??
Zivonche said:
AM i The only one noticed that??
Click to expand...
Click to collapse
You are not alone,also I (and many other people using CM9) reported a daley in incoming call!
I got a different custom rom,different cpu settings but the same governor!
Maybe governor related,dunno,but seems there isn't a solution atm.
Hey there guys!
I'm a happy owner of oneplus for about 3 weeks now but I noticed that after a few days of usage the device slows down gradually, up to a point where using it is quite troublesome. Also the wake up button seems to fail at times, where I have to press it 3-4 times to wake up(today it failed to wake up and I had to restart it). Any idea what might be causing it? I'm on the CM11S newest update, no kernel changes whatsoever, interactive governor and TWRP installed.
Thanks in advance!
I'm running PA 5.1, facing a similar issue. Capacitative buttons light up immediately after pressing the power button (or double tap) but the screen lags for about 2 seconds.
Sounds like your cpu min frequency is set below 300
cameronmfjay said:
Sounds like your cpu min frequency is set below 300
Click to expand...
Click to collapse
That's impossible on stock.
cameronmfjay said:
Sounds like your cpu min frequency is set below 300
Click to expand...
Click to collapse
Nope. Done nothing of this sort. Moreover, the lag occurs only if I wake the phone after 3-4 minutes of screen off. If I wake it immediately after turning the screen off, there's no lag.
PS: I'm on AK Kernel 300.