Related
Hi there. I am looking for v08 firmware for my developer 03D .
If any one have it in any format please post .
Not even cwm backup?
bump please
I don't think anyone will have that including your local lg service center so if you need it cause you bricked your phone (I think phones with v08 couldn't run other firmware versions) they won't be able to fix it themselves as well and they will replace it... I can bet on that
I thought that too. I can however install any rom but it won't help.i already have a repair order with lg and I am sending the phone for repair. Lets see what's happens.
Hello, and hope this is the right place to post this.
So, without any knowledge about all this smatphone/android stuff, I finally got one by a really good price. An ot-983.
Some friends conviced me to root it. I found a way to do it and noticing all the bloatware from it's original carrier (this phone was carrier unlocked when bought) I decided to clean up a bit.
I ended up cleaning a lot of stuff that I simply didn't use from a \custapp\ folder in there.
Thing is, a day latter I got a notification of a firmware update and I just said yes.
The said update failed, complaining it seems about the lack of some of the deleted bloatware.
Now, here's when the lack of thinking shows.
Wondering about it, I decided to look around options and found the factory reset.
Being a new and mostly empty phone, I did it (wiped clean the sd too),
And there, it went all into hell!
After reboot, it can't get my wireless anymore (have to use a static ip workaround for it...)
Root Checker says it's not properly rooted (using the same rooting technique as the first time doesn't fix it)
superuser still seems to be working, altho it crashes now and then with some errors about permissions.
also, can't get BusyBox working because it says there's no su binary and I can't download an update for it.
In short, I guess I need to get this phone to it's basics, if possible unbranded.
I don't really know what I need for that, but here I am, reaching at you that might help
I guess I need a stock rom and a way to flash it.
I'd appreciate a lot any help on getting whatever it is needed.
*cheers
root alcatel ot 983
ahkronn said:
Hello, and hope this is the right place to post this.
So, without any knowledge about all this smatphone/android stuff, I finally got one by a really good price. An ot-983.
Some friends conviced me to root it. I found a way to do it and noticing all the bloatware from it's original carrier (this phone was carrier unlocked when bought) I decided to clean up a bit.
I ended up cleaning a lot of stuff that I simply didn't use from a \custapp\ folder in there.
Thing is, a day latter I got a notification of a firmware update and I just said yes.
The said update failed, complaining it seems about the lack of some of the deleted bloatware.
Now, here's when the lack of thinking shows.
Wondering about it, I decided to look around options and found the factory reset.
Being a new and mostly empty phone, I did it (wiped clean the sd too),
And there, it went all into hell!
After reboot, it can't get my wireless anymore (have to use a static ip workaround for it...)
Root Checker says it's not properly rooted (using the same rooting technique as the first time doesn't fix it)
superuser still seems to be working, altho it crashes now and then with some errors about permissions.
also, can't get BusyBox working because it says there's no su binary and I can't download an update for it.
In short, I guess I need to get this phone to it's basics, if possible unbranded.
I don't really know what I need for that, but here I am, reaching at you that might help
I guess I need a stock rom and a way to flash it.
I'd appreciate a lot any help on getting whatever it is needed.
*cheers
Click to expand...
Click to collapse
pls i need you to explain to me carefully , step by step how you rooted the alcatel ot 983 , pls i have searching for the past weeks on google without results , pls help me , pls explain carefully , thanks in advance , i will be so happy if you help , thanks again in advance
mohamm said:
pls i need you to explain to me carefully , step by step how you rooted the alcatel ot 983 , pls i have searching for the past weeks on google without results , pls help me , pls explain carefully , thanks in advance , i will be so happy if you help , thanks again in advance
Click to expand...
Click to collapse
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.
I need original stock alcatel ot 983 rom
hi guys
I bricked my ot 983 after flashing with different alcatel models rom
can some one please give me a copy of original stock rom for alcatel one touch 983
please
my email [email protected]
maybe your handheld is a brand new and nobody mod it yet
be patient bro and keep searching in google with any keyword
help me make tutorial on youtube
ahkronn said:
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.
Click to expand...
Click to collapse
bro i dont know much about android stuff , but pls can you make a tutorial on youtube like this you can help me and millions out there for rooting the phone , ps help and thanks so much in advance
ahkronn said:
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.
Click to expand...
Click to collapse
Where did you get the upgrade from ?
My story is like this: rooted, uninstalled some bloat from system and after a factory reset I'm stuck in the initial setup wizard (after completing almost all stages from setup it crashes at the end, after connecting at the google account - tryed to ignore that step but either way it crashes). Fastboot works but adb don't.
I do have another identical phone Alcatel One Touch OT-983 but with no root, with no modifications. Is there a way to backup the original/stock image and flash it over the malfunctioning one and restore it??
I tried with the proprietary upgrade tool from Alcatel but no succes as it close saying I don't need an upgrade because it's the last version of software installed in my phone. I thought even to broke intentionally the rom but I'm afraid that the upgrade utility from Alcatel will let me down, as I read that another users didn't managed to complete successfully the upgrading process. Is there a way to trick the system that has a previous version of Android?
Thank you for taking your time to read this and hope someone has an idea to solve our problem.
Have a nice day guys, you can contact me at puiocku at gmail dot com.
Have someone this stock rom (for Alcatel One Touch 983 (Valencia)) ???
Here is a Alcatel OT-983 rom, not sure which country it is from: https://www.dropbox.com/s/g2ljtrpqru3uihm/rom 983.zip?m
Here is my o2 uk backup rom: http://www.mirrorcreator.com/files/C4VEKHEI/OT-983_backup_uk.rar_links
this .zip file contains the boot.img, system.img and recovery.img
Someone needs to create a clockwork mod recovery for our phones now.
here is the sourcecode for this phone: http://www.mirrorcreator.com/files/85KDRTYP/OT_983_20130103.7z_links
Can't get to recovery
I have a bricked rooted OT 983, by error i installed a ZTE Blade's CM9 ROM and now i can't get my phone to recovery by using ADB that is the only way, i have downloaded the stock ROM but i don't know how to install it. :crying: PLEASE HELP!!!!!!!!!!!!!!!!!!!!
i done the same
Please help!! my phone is stuck on
jrdsetupwizard has stopped
cant get past setup screen
Possible solution for getting back original ROM on "stuck" phone
ryanraven said:
i done the same
Please help!! my phone is stuck on
jrdsetupwizard has stopped
cant get past setup screen
Click to expand...
Click to collapse
I recently "semi bricked", if my Alcatel OT983, if that's possible. It would not boot fully and got stuck on the "jrdsetupwizard has stopped" screen.
Here's what I did. The issue with getting the Alcatel One Touch Upgrade software to work appears to be getting the correct USB Driver installed. There are a number of potential USB drivers. This phone needs the driver in the Alcatel One Touch Upgrade. The stock Windows one or the one used for rooting the phone using instructions from the errorsoft website from the oneofgod will not work with this upgrade procedure.
1. Download the Alcatel One Touch Upgrade software and install on your machine. Open up the folder where the software is installed.
Look inside the folder that is called USB Driver and look inside the appropriate folder for your type of Windows machine 64bit or 32bit (x86) and install that driver for USB - that is the correct one for the upgrade
2. Run the upgrade software whilst connected to the internet. Connect your phone when it is off. You should just get the Android icon i.e. not charging or anything else. The icon should just stay there all the time the process takes place.
3. The upgrade will download. It's when the process gets to about 70% that the phone the starts upgrading. It will take a few moments but when it starts progressing into the late 70s and 80s you should be well on the way. At least that's how it went for me and I got my phone back!
Hope this helps.
to Hajj_3 :
Tanks for share the ROM.. I need it to recover my friends phone..
I just got this phone, not looking to root it yet as theres no option for a custom rom yet.
didnt want to start a new thread as theres not really any section for this phone yet.
Everything was fine until i installed the firmware update. Now applications cannot access the mic. Some complain about it being in use by another app. others like video editor or sound recorder will record, but the video recorder there is no file, and sound recorder crashes when you hit stop.
Alcatels website is useless, wasnt working yesterday, today it is but cant find any contact details incase its a bug in there firmware. Everything works fine except for that. Which is annoying because i use RTA software and now it doesnt as it cant access the mic.
any ideas?
Hi guys,
I've rooted my phone with abd and udpate.zip a long time ago, and it was fine till some days ago it stopped from receiving calls and the home button does nothing when pressed, although in recovey mode it works.
I've done a hard reset, reflashed the recovery.img, system.img and boot.img I've found in this post with fasboot, but did not solve the problem.
I've tried a firmware update with Alcatel's own software but it just keeps saying my firmware is updated already. I've also tried to edit the proinfo file, but I don't know what to change in the file. You can see more about that method here: http://forum.gsmhosting.com/vbb/9772370-post8.html
My guess is that the files that are corrupted and preventing me from receiving calls are somewhere else than those img's I've flashed. Has anybody got a FULL backup of his rom (e.g. Rom Manager) so I can recover the phone completely?
Thanks!
upgrade software
bussand said:
I recently "semi bricked", if my Alcatel OT983, if that's possible. It would not boot fully and got stuck on the "jrdsetupwizard has stopped" screen.
Here's what I did. The issue with getting the Alcatel One Touch Upgrade software to work appears to be getting the correct USB Driver installed. There are a number of potential USB drivers. This phone needs the driver in the Alcatel One Touch Upgrade. The stock Windows one or the one used for rooting the phone using instructions from the errorsoft website from the oneofgod will not work with this upgrade procedure.
1. Download the Alcatel One Touch Upgrade software and install on your machine. Open up the folder where the software is installed.
Look inside the folder that is called USB Driver and look inside the appropriate folder for your type of Windows machine 64bit or 32bit (x86) and install that driver for USB - that is the correct one for the upgrade
2. Run the upgrade software whilst connected to the internet. Connect your phone when it is off. You should just get the Android icon i.e. not charging or anything else. The icon should just stay there all the time the process takes place.
3. The upgrade will download. It's when the process gets to about 70% that the phone the starts upgrading. It will take a few moments but when it starts progressing into the late 70s and 80s you should be well on the way. At least that's how it went for me and I got my phone back!
Hope this helps.
Click to expand...
Click to collapse
The problem is, the upgrade software link doesn't work anymore :\.
ht tp: // ww w1. alcatelonetouch.com/global-en/ support/download/one_touch_ 983.html
(remove of spaces, im a new user so they won't let me post one)
Is there anyway someone can find a link for it because i have been searching for ages and haven't found one.
http://www.alcatel-mobilephones.com/global-en/support/download/one_touch_983.html
I posted this somewhere else, but I figured it was more appropriate to place it here.
After rooting and installing CWM using the method in the sticky at the top of the development section, (darkman's unnoficial CWM Recovery), My touchscreen no longer responds to finger input. The pen works fine, and is the only way I can navigate the tablet. Touch input doesn't work in CWM-touch either. I have tried: flashing a custom rom, flashing a stock rom through CWM, flashing stock firmware through Odin (both 4.0.4 and 4.1.2), resetting the triangle count, factory wipe/data reset, re-installing stock recovery, and changing various options in the settings. Nothing helped at all. I'm currently waiting for a reply on filing a warranty claim, but would really like not to have to send it in and wait for a new one. I've seen other people with similar issues, but most of them are either the s-pen doesn't work, or both s-pen and touch don't work. Does anyone have any idea of how to fix it, or is it definitely a hardware issue?
Thanks,
Reffu
Hi,
same issue here. Today the touchscreen stopped working suddenly after i flashed the Android Revolution HD 5.0 Rom yesterday. However, the S-Pen is still working fine. Installing other ROMs and the Stock ROM via Odin did not help. Issue allso appears in Touch-enabled-Recovery.
I see no reason, why this should be a hardware issue, although my N8000 came back from service a few days ago, where they also replaced the screen and digitizer.
Had anyone this issue before and was abled to resolve it?
Greets
I have the same problem on an n8013. Installed Revolution ROM HD version 5, rebooted and lost me touchscreen completely. Nothings worked. Flashed back to stock 4.1.2 but still no go.
Sent from my SCH-I535 using Tapatalk 2
to read this as a Note 10.1 newbie is not very encouraging. are there any similar facts between all of you like
which Note model do you have
how did you jaibreak (which method)
which rom did you have before
which rom do you have now
how did you flash a new rom
...
is there a way to find out whether the touchscreen is really "dead for touch"?
This is a bit scary - my Note 10.1 is arriving today, and I plan to root it at a minimum. I actually don't mind Touchwiz all that much on my Note 2 (which is running CleanROM ACE), so I think I might just root the 10.1 for now.
So restoring completely back to stock (via Odin) doesn't fix it? That is really odd that ROM-ing this thing might cause a hardware failure...
jiggyman said:
I have the same problem on an n8013. Installed Revolution ROM HD version 5, rebooted and lost me touchscreen completely. Nothings worked. Flashed back to stock 4.1.2 but still no go.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I would be tossing my cookies at this point ........ Did you also do a factory reset after flashing back to factory ROM?
kkretch said:
I would be tossing my cookies at this point ........ Did you also do a factory reset after flashing back to factory ROM?
Click to expand...
Click to collapse
Did anyone solve this, I'm having the same problem.
I never actually ended up solving this. I sent it in for repair (I had just bought it about a week before attempting to root) after flashing back to stock, and now I have a "new" one . I really want to root it, but I'm afraid the same thing is going to happen again. I really don't want to have to check if the warranty will cover the same issue twice, even if they don't know I rooted.
reffu said:
I never actually ended up solving this. I sent it in for repair (I had just bought it about a week before attempting to root) after flashing back to stock, and now I have a "new" one . I really want to root it, but I'm afraid the same thing is going to happen again. I really don't want to have to check if the warranty will cover the same issue twice, even if they don't know I rooted.
Click to expand...
Click to collapse
Just curious - did you just root, or did you root and install a ROM?
I am only rooted so far - haven't felt the need to ROM yet - partially due to worries about this happening. I bought a refurb from Best Buy and only get 90 days of warranty.
reffu said:
I never actually ended up solving this. I sent it in for repair (I had just bought it about a week before attempting to root) after flashing back to stock, and now I have a "new" one . I really want to root it, but I'm afraid the same thing is going to happen again. I really don't want to have to check if the warranty will cover the same issue twice, even if they don't know I rooted.
Click to expand...
Click to collapse
If they say you got a new one, you got one. They'll tell you otherwise if there's an issue over the phone.
But I wouldn't be afraid of ROMs, but to be more diligent and wise when it comes to choosing them. It's like choosing a poisonous mushroom versus an edible one to make stroganoff or stir fry. If you know what to avoid for the next time and follow the correct process to doing the root and flashing, there will not be an issues.
This is from someone who has soft-bricked my first tablet and learned how to unbrick my SIM-less Captivate and Note 10.1. It's how you apply the method and how much attention you practice not getting stuck into these situations is what matters. Especially since I bricked my tablet via experimentation and un-bricked it on the same day with ease.
It's not some big complex deal of rocket science or something only the mere geniuses can do, its how you perceive yourself and how you act. If you believe that you will suck and brick it to kingdom come , it will happen intentionally or subconsciously.
In this case, it was a freak accident where the file/s accessed and deleted the wrong files which allowed for capacitive touchscreen use, and it should be reported to x developers if you have not done so already.
I have rooted and used the Revolution HD rom, the Rom where you customize the colors of the bar/other things, and on the Captivate, the AOKP Collective. I further customized the latter with the Xperia launcher as it zips.
Did anyone find a repair for this besides replacement? My Note 2 is doing the same thing now.
Has anyone found a fix for the touch screen not working yet??
Anyone have any ideas?
Technicians input for touch problem
I am a technician and been repairing electronic devices for over 30 years and I would say the majority of repairs I have done were caused by people not happy with how their standard brand new device works and feel they need to make it better by modifying it in some way or other.
Now with smartphones if you didn't want the device as a standard rom and operating system why buy it ?
If you think the phone would be so much better with a modified rom then buy one working with a modded rom to start with as most of you put as much effort into modding as you did in your school work.
Anyone with half a brain that follows the instructions on the mod sites exactly as shown step by step will never have a problem, all those that do end up with paper weights or bricks didn't follow the instructions in numerical order.
Believe it or not even if after you have modded a rom and brought it back to standard they know it has been modded as they have a list of problems associated with repairs after roms have been modded so you are only fooling yourself they don't.
Same as the smoker that tells his Dr he has given up even though all the symptoms prove he really didn't.
So in my expert opinion if you play with modding and stuff it up why should you be eligible for a warranty claim ? The manufacturer has sold you or supplied a working item that you decided to f_ck around with and because of your stupidity expect some one else to pay for it.
I am not saying don't mod your phone with all the great roms out there but please to save yourself a lot of pain and cost some poor smuck trying to run a business in these economic times a lot of out of pocket from sending items back for replacement or warranty plus the time it takes to do all the paperwork and such, please please please read the instructions 300% or triple check you are doing everything exactly as the instructions say and you will be enjoying all the new benefits of that customised rom and laughing at all the noobs stuffing up their brand new device from not doing so.
I know this won't fix your problem but reread that last bit it was your problem as you are to clever to follow some one else's instructions
anyone have solution regarding this issue, mine have issue also, can anyone spare how to fix it without changing hardware?
---------- Post added at 06:47 AM ---------- Previous post was at 06:28 AM ----------
i hope anyone can solve my issue with touch not responding
WOW.. on TOPIC Flashing .pit might help ???
Gardum said:
I am a technician and been repairing electronic devices for over 30 years and I would say the majority of repairs I have done were caused by people not happy with how their standard brand new device works and feel they need to make it better by modifying it in some way or other.
Now with smartphones if you didn't want the device as a standard rom and operating system why buy it ?
If you think the phone would be so much better with a modified rom then buy one working with a modded rom to start with as most of you put as much effort into modding as you did in your school work.
Anyone with half a brain
Click to expand...
Click to collapse
------------------------------------------------------------------
WOW.. And you come to XDA For ? Most of the time The modded roms often fix manufacture issues and add features the manufacturer decided users do NOT Need ..Being your first post on xda . I do NOT think attacking users is the way to go. Also your post adds nothing to help the users..
ON TOPIC
Have any of you who have this issue try to do a full Wipe and flash pit file for your device.. Something is being left behind and not over written is most likely the Cause.. Also post this in the Rom developers forum So maybe he can look into it more as its his Creation..
Good Luck
erica_renee said:
------------------------------------------------------------------
WOW.. And you come to XDA For ? Most of the time The modded roms often fix manufacture issues and add features the manufacturer decided users do NOT Need ..Being your first post on xda . I do NOT think attacking users is the way to go. Also your post adds nothing to help the users..
ON TOPIC
Have any of you who have this issue try to do a full Wipe and flash pit file for your device.. Something is being left behind and not over written is most likely the Cause.. Also post this in the Rom developers forum So maybe he can look into it more as its his Creation..
Good Luck
Click to expand...
Click to collapse
thanks for reply can you give us a hint how to find pit files to flash it in Odin, pit files + official firmware tar.md5 right sir? my model is n8020 i will give it a try, thanks for reply sir
popohunters said:
thanks for reply can you give us a hint how to find pit files to flash it in Odin, pit files + official firmware tar.md5 right sir? my model is n8020 i will give it a try, thanks for reply sir
Click to expand...
Click to collapse
i Have seen them floating around random threads. There is a Thread in the General section with .pit files. Buy you MUST have the one for your Device..
Sorry i cant help I have 8013 device .
erica_renee said:
i Have seen them floating around random threads. There is a Thread in the General section with .pit files. Buy you MUST have the one for your Device..
Sorry i cant help I have 8013 device .
Click to expand...
Click to collapse
thanks sir, im done the flashing with pit files+ official firmware but touch screen is still missing, is there a modem file for touch screen maybe i missed it while its in downloading process before i brick the touch screen
any hope out there?????
confused and need help
i have a n8000 , base band version N8000XXCLL1, my touch screen stoped responding while playing a game , only Spen works , tried resetting , but no help, I'm a no-voice when it comes to programing and need a step by step guide >>>> many thanks in advance for all your help
reffu said:
I posted this somewhere else, but I figured it was more appropriate to place it here.
After rooting and installing CWM using the method in the sticky at the top of the development section, (darkman's unnoficial CWM Recovery), My touchscreen no longer responds to finger input. The pen works fine, and is the only way I can navigate the tablet. Touch input doesn't work in CWM-touch either. I have tried: flashing a custom rom, flashing a stock rom through CWM, flashing stock firmware through Odin (both 4.0.4 and 4.1.2), resetting the triangle count, factory wipe/data reset, re-installing stock recovery, and changing various options in the settings. Nothing helped at all. I'm currently waiting for a reply on filing a warranty claim, but would really like not to have to send it in and wait for a new one. I've seen other people with similar issues, but most of them are either the s-pen doesn't work, or both s-pen and touch don't work. Does anyone have any idea of how to fix it, or is it definitely a hardware issue?
I got the same problem after rooting my phone.... I used the following method and got ride of that Problem. ..
type this star code in in it Phone dialler *#2663#
Now you should see "TSP"
<update>
TAP on TSP ......it will take 5 seconds only....
......
NOW ENJOY ☺☺
Click to expand...
Click to collapse
:angel: Need rom for a13b tablet with working TS
I have downloaded a bunch of rom's in .img format but i could not get the right one that suites my tablet the last one i downlaoded was TRAGiC-A13-DEC2012-404-ICS\ its Ts is reverted in the opposite direction of my screen,, i was wondering if someone can provide me a compatible rom in .img format for me to burn on my sd card and flash it back to my tablet..btw my tab is 7 inch..
hoping someone could help me out!!
Hi im having the same issue , i (without making a backup) flashed a rom without TS from another forum by Toxicro, their are touchscreen and gravity sensor fixes on the site too that you flash with Livesuit 1.11. but none seem to solve my problem outright , i have two files that bring my TS back online but the TS is mirrored from the center ?, i found on another forum that i could FIX inverted axes on TS by editing the script.bin file by executing a changexy.cmd using a scrip-bin but even tho i revert the x , y and x_y axis the TS still responds the same , im still a noob when it comes to tablets but im trying my hardest to fix my mistake
link to ROM forum
http://www.symbianize.com/showthread.php?t=974710
link to FIX inverted axes
http://www.techknow.me/forum/index.php?topic=5756.0
Livesuit 1.11.
http://www.4shared.com/rar/s4IVIxGc/livesuitpack_111__a10_and_a13_.html
there is a god haha , i just found a firmware for my tablet , heres a link
http://www.filefactory.com/file/6d3...eng-IMM76D-Factory_Image_TechKnowForum_net_7z
craigmoly said:
Hi im having the same issue , i (without making a backup) flashed a rom without TS from another forum by Toxicro, their are touchscreen and gravity sensor fixes on the site too that you flash with Livesuit 1.11. but none seem to solve my problem outright , i have two files that bring my TS back online but the TS is mirrored from the center ?, i found on another forum that i could FIX inverted axes on TS by editing the script.bin file by executing a changexy.cmd using a scrip-bin but even tho i revert the x , y and x_y axis the TS still responds the same , im still a noob when it comes to tablets but im trying my hardest to fix my mistake
link to ROM forum
http://www.symbianize.com/showthread.php?t=974710
link to FIX inverted axes
http://www.techknow.me/forum/index.php?topic=5756.0
Livesuit 1.11.
http://www.4shared.com/rar/s4IVIxGc/livesuitpack_111__a10_and_a13_.html
there is a god haha , i just found a firmware for my tablet , heres a link
http://www.filefactory.com/file/6d3...eng-IMM76D-Factory_Image_TechKnowForum_net_7z
Click to expand...
Click to collapse
Thanks for this but i finnally found the one that saved my Tablet Its Q88B-中性英文-4G-6225翰彩-带视频20120917-blue stick.img
i downloaded that rom from the tread...i saw form XDA but its wifi dont work but i found a solution to that problem ...
if you want to know how i did it just pm me on fb.. www.facebook.com/angelo.e.espinosa
Hello everyone.
I have an Alcatel One Touch 908F running Android 2.2.2 that I chose to root and install a 2.3 ROM since no official update was released and it had a lot of advantages that I really need. I successfully rooted it with VROOT, install a CWM 5.0.2.7 recovery and flashed two custom ROMs based on 2.2.2 (the one for Alcatel One Touch 908S WIND, and the one for Alcatel One Touch 908Q T-Mobile) just for testing.
Both successfully worked with no problems at all (except the fact that Back, Home and Menu changed their places but it was fixed by flashing a tool that I found on this forum - Thank you so much, developers!) so I wanted to flash a 2.3 ROM, but I didn't realize that it wasn't approprite (It was only for Alcatel One Touch Telenor, and the worst: it wasn't told in the instructions!). I knew it when, once my phone booted for the 1st time, it showed the "Telenor" logo reversed on top, and white lines at the bottom of the screen. So I reverted back to my stock ROM using a backup made with CWM.
I got the stock ROM again. Only now, neither the touchscreen nor the lighting Home, Menu and Back keys are working! Hitting the screen acts like hitting the Menu button!
I tried many ROMs, and it didn't work. Well, the good thing is that I still have root access, USB debugging enabled and CWM 5.0.2.8 recovery.
I'm really desperate. My phone is out of warranty. Is my phone really as useful as a brick, now? I hope it isn't. Can you help me, please? I urgently need my phone to work again because I can't afford to buy a new one or repair it! Is there any software that can bring my only smartphone back to life? Shall I switch to TWRP recovery? Which ROM shall I flash?
Thank you so much in advance for your help!
UP... (Since there was no reply for so long...)
I see, it is not a popular model
I found out that the problem can be solved by flashing the stock kernel which contains the original touchscreen drivers needed to make it work again, but I couldn't find the file. Can anyone upload it for me, please? If this is not the right way,
Does anyone have another, please? Thank you!
mallouka97 said:
UP... (Since there was no reply for so long...)
I see, it is not a popular model
I found out that the problem can be solved by flashing the stock kernel which contains the original touchscreen drivers needed to make it work again, but I couldn't find the file. Can anyone upload it for me, please? If this is not the right way,
Does anyone have another, please? Thank you!
Click to expand...
Click to collapse
Flash everything ( including ROM , boot.img etc. ) created for your device . It will solve the problem .
As a warning, don't flash other device's firmware , until you became a porter or using an Android one :sly:
Hope I helped !
AlfasMP said:
Flash everything ( including ROM , boot.img etc. ) created for your device . It will solve the problem .
As a warning, don't flash other device's firmware , until you became a porter or using an Android one :sly:
Hope I helped !
Click to expand...
Click to collapse
Sorry I was late... I will give it a try. Thanks anyway!
Did you solve this?
gringobenuk said:
Did you solve this?
Click to expand...
Click to collapse
OP hasn't been online since 2015 so provably yes