Related
Hi
ive got a question.... ive flashed adrenaline cyanogenmod version. must i activate it?
greetings
Sent from my GT-S5670 Galaxy Fit using xda-developers app...
No need to activate..just flash the zip n u r done..n inorder to use adrenaline boost first flash that corresponding zip n den use it via terminal emulator by typing su and then boost
MajinSaiyan4 said:
No need to activate..just flash the zip n u r done..n inorder to use adrenaline boost first flash that corresponding zip n den use it via terminal emulator by typing su and then boost
Click to expand...
Click to collapse
Where I get Adrenaline Boost?
Sent from my GT-S5670 Galaxy Fit using xda-developers app...
adrenaline bost ----> here
davidjuke said:
adrenaline bost ----> here
Click to expand...
Click to collapse
Is it safe? Cause there is written that Adrenaline Boost disable alarm and so on and so on.... How can I prevent that it don't crash some apps and that it disables something? And, is this file like busybox or something other, which not runs without writing the command in the Terminal Emulator or adb-shell? How long is the Boost activated? Till next restart?
Greetings...
Sent from my GT-S5670 Galaxy Fit using xda-developers app...
TheRealFelix0212 said:
Is it safe? Cause there is written that Adrenaline Boost disable alarm and so on and so on.... How can I prevent that it don't crash some apps and that it disables something? And, is this file like busybox or something other, which not runs without writing the command in the Terminal Emulator or adb-shell? How long is the Boost activated? Till next restart?
Greetings...
Sent from my GT-S5670 Galaxy Fit using xda-developers app...
Click to expand...
Click to collapse
This is perfectly safe n u wont get any fc of apps nor anythng..it just frees up unused ram so ur phn speeds up..n it wil run using command enter in terminal emulator
well i tried adrenaline engine but always get the bootloop, i guess i should be doing something wrong ... mount system, mount data , flash the script and... boot loop..
eccos said:
well i tried adrenaline engine but always get the bootloop, i guess i should be doing something wrong ... mount system, mount data , flash the script and... boot loop..
Click to expand...
Click to collapse
You need CM Version!
Sent from my GT-S5670 Galaxy Fit using xda-developers app...
you need to flash the cm version if you are on cm based rom and likewise the stock version on stock based custom rom.
just make a backup before you flash it just as a precaution
Sent from my GT-S5670 using xda premium
I have installed PAC ROM(Parandroid AOKP Cyanogenmod) firmware version ddkt2 jb 4.1.2 for G fit ..I flashed adrenaline engine 4.4 in recovery mode by flashing mount system mount data then flash.....
1.) How do I come to know if its flashed ?
2.) will it work or the engine that came with the ROM installed is more capable?
please guide and help with these basics?
mni ANKIT said:
I have installed PAC ROM(Parandroid AOKP Cyanogenmod) firmware version ddkt2 jb 4.1.2 for G fit ..I flashed adrenaline engine 4.4 in recovery mode by flashing mount system mount data then flash.....
1.) How do I come to know if its flashed ?
2.) will it work or the engine that came with the ROM installed is more capable?
please guide and help with these basics?
Click to expand...
Click to collapse
Check whether the files in the adrenaline engine zip are in corresponding folders, to know whether it is installed correctly or not..
Sent from my GT-S5670 using xda
Hi.I'm back again!
I collected lot of init.d&build.prop script and combined them with my own values and my own tweaks to get a good feedback from our JB roms!
And as you know most of our JB roms need lots of tweaks for having good smoothness and performance and Battery life!
I didnt add Kernel becuase its user selection and every one choose it on his own opinion.And this tweak mode will never include apps,kernel,themes and other useless thing! JUST TWEAKS!
All In One Tweaks
Code:
New Tweaks V1
GPS Boost tweak
SD speed tweak
VMlagtuner 1.9 MP4
Build.prop tweaks
ZipAlign apk on every boot to get best ram management
Defrag DataBase tweak for better I/O tweaks
Battery life tweaks
Killed logger
And more thing I forgot!
Now Only SlimBean (alpha2) And CM10(alpha5&6) Are Supported!
Download AIO Tweaks V1 For CM10 alpha5
Download AIO Tweaks V1 For CM10 alpha6
Download AIO Tweaks V1 For SlimBean alpha2
How to install:
#Reboot into recovery
#Make a Nandroid Backup
#Wipe Cache & dalvik Cache
#Install Zip
#Fix premissions
#Reboot
And Thanks to:
*LENAROX (VMLagTuner)
*Ivendor&Crybert (Build.prop)
*METOD (GPS boost)
Many of tweaks are found any were so I couldnt found owner!And other tweaks are mine
And At last I'm not responsible issues this script may cuase!
Reserved
Thanks guy!! Works also on CM10 alpha 6??
First post!!
raptor92 said:
Thanks guy!! Works also on CM10 alpha 6??
First post!!
Click to expand...
Click to collapse
Please lend me alpha6 build.prop to create special version!
alireza7991 said:
Please lend me alpha6 build.prop to create special version!
Click to expand...
Click to collapse
This is the build.prop from cm10 alpha6.
alireza7991 said:
Please lend me alpha6 build.prop to create special version!
Click to expand...
Click to collapse
Can you upgrade to lazer script instead of VM lag tuner
Sent from my GT-i9001 using xda app-developers app
Aldokazer said:
Can you upgrade to lazer script instead of VM lag tuner
Sent from my GT-i9001 using xda app-developers app
Click to expand...
Click to collapse
Hi
CM10 alpha6 now is supported!
I got bootloop with lazedroid 2.0 but I'm going to test 2.6,And if it works I will upgrade it!
How to remove it?
Sent from my GT-I9001 using xda app-developers app
Pereira.Pedro said:
How to remove it?
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Many file are replaced and cant be removed!Just resotre system of backup!
Will this work on SmoothieJB?
Amazing !
Thank you so much
Sent from my GT-I9001 using xda app-developers app
At CM10 alpha 6 with CastagnaIT Kernel v7.3 OC Extreme does work i have no signal from SIM and the airplanemode change every 0,7 seconds on/off/on/off...
Edit: i try to reinstall CM10 alpha6 with CastagnaIT Kernel v7.3 OC Extreme again and i boot up phone .. after that i install this and fix per .. and new when i try bootup he optimizing apps and then restart phone
alireza7991 said:
Many file are replaced and cant be removed!Just resotre system of backup!
Click to expand...
Click to collapse
You did a nice work! But I had to remove it because with this tweak I can't change the DPI
Sent from my GT-I9001 using xda app-developers app
Hello!
Can I use it with Pimp my Rom?
After one day usage...I must say that it's not so good with Cm10 alpha6. It seems to use more battery than within the tweak. I reinstalled CM10a6 and all feel good!
Guy...it need some improvement! I'll wait until v2 is released! Thanks
Installed it on slimbean with broodprank kernel. Result is not good! It slows down the start of apps, changing apps and scrolling in apps. Had to reflash my rom
I test this on sleambean and cm10 alpha5 ,result were prefect and no bugs at all!only alpha6 is not tested.You must fix prem and wipe cache/dalvik after installing this mod!
I'm working on V2 with lazedroid2.6 and removed battery tweaks.
I did this. nonetheless there were lags
Could you please make this for SlimBean Alpha 3?
Raiden34 said:
Could you please make this for SlimBean Alpha 3?
Click to expand...
Click to collapse
Hi
I completed V1.1 with bug fixed and more tweaks for all GB-ICS-JB roms but I have an error while installing it on TWRP ; I'm trying to fix it,then I will upload it!
I have a slow sd card and i want to know how to change the memory script which is in build 6 or fly rom v3. i Have tried by putting build 2 script in Additions folder but i didnt work. it did work on build 3 and 4..
harib12 said:
I have a slow sd card and i want to know how to change the memory script which is in build 6 or fly rom v3. i Have tried by putting build 2 script in Additions folder but i didnt work. it did work on build 3 and 4..
Click to expand...
Click to collapse
U dont need to change the script, because both flyscript and derefas mv2ext scripts are good...
Other script like int2ext, m2sd, etc.. will not work on sense 4.0a rom. There will be no issues if u have a class 4 sd card... but if u want performance then its better to purchase a class 10 sd card...
I cant find a good sd card.... Coz the place where i live is a mess
And can u give. Me a blootooth fix patch so i can also enjoy sense 4
Sent from my HTC Explorer A310e using xda app-developers app
Pre Requisites :
*Root Access
*ROM with init.d present
Note:-
This is a universal mod and will work on any device and any ROM
If you see "for Simplicity v5" in the updater Script, Don't worry, its there just because it was first made for that awesome ROM
LightSpeed Intervention
or
Smoothness and script Tweak
I don't know why but when I installed Simplicity, RAM consumption was very high even after opening 2 apps. (More than 200)
So, I included loopy smoothness, adrenaline script and simplicity is simply like a RED BULL
So, what does the mod do?
It gives your mobile wings
Smoothness by loopy smoothness
Better RAM consumption by adrenaline tweak
And prerajulisation and farhanitration by kuro Tweaks and other Tweaks
RAM consumption is great and also device is very snappy
Consists of :-
ZRam Tweak
Adrenaline Tweak
Loopy Smoothness Tweak
Kuro Tweak 1
Kuro Tweak 2
Sysctl Tweak
Droidwall Modules
Download
Stellar Robotic Intervention
What's in it?
Sounds Great?
Just Roboto Font, yeah, just it
Download
Credits:-
Thanks kewkie for the idea of name of the mod
Lightspeed Intervention:-
ImbaWind for Adrenaline script
lpy for loopysmoothness
kurotsugi for kuro Tweak
Sysctl and Droidwall devs for them (Too lazy me and too laggy net to search)
Stellar Robotic Intervention:-Google for Roboto font
Instructions:-
They are at last because very less people read them
Though all the mods are tested both on stock and CWM recovery, you have the choice to use any one of them
These all mods mount and unmount partition and set the permissions automatically, so no no need tod o it, but these steps shown in instructions are shown to be done if everything else fails
1. Download desired mod
2. Place it in the root of your sdcard(Preferred)
3. Reboot into recovery
4. Mount /system(Do if installation fails)
5. Install zip from sdcard
6. Read what appears on screen
7. Reboot
8. Enjoy
Note for hell lock kernel users
delete 99complete script from /system/etc/init.d/ folder if stuck in bootloop
Info by Caliban
Will try !!
Sent from my GT-S5360 using xda app-developers app
have i read right,its with zram?is it possible to use it without zram,its slows phone down and its not nesecarry i think.
---------- Post added at 10:06 AM ---------- Previous post was at 10:00 AM ----------
another thing is that u should make info for hellfusion kernel user,i your tweak are 99complete script,that can make bootloops on hellskernel.
whoaaa!!
Yeah!! phone is going like a bullet
nyc bro
and thanks for sharing
ps- prerajulisation and
farhanitration are awesome lollzz
JustInsAne aka CALIBAN666 said:
have i read right,its with zram?is it possible to use it without zram,its slows phone down and its not nesecarry i think.
---------- Post added at 10:06 AM ---------- Previous post was at 10:00 AM ----------
another thing is that u should make info for hellfusion kernel user,i your tweak are 99complete script,that can make bootloops on hellskernel.
Click to expand...
Click to collapse
Thanks for the info
But
It's a misconception that ZRam Tweak lags the device.
And I will add that hell lock info in OP
CoOl.... Will try !
I think zram is like a space on ram so it is faster than the cache.....leads to high ram usage maybe I don't know....what I know is that it works....
Sent from my GT-S5360 using xda app-developers app
5 mb for Roboto font ?!
@charsi babu
Maybe its flash able
and it contains 6 or 7. Ttf
Sent from my GT-S5360 using xda app-developers app
It is great
I have tested it on my friend's phone
No problem at all
And smooth phone
Me and my friends including have 4 phones
So I test everything before posting
Me - S5830i
My friend
Samsung Galaxy Y
Samsung Galaxy Y Duos
Micromax A90s
Recently, I will test and post the mod for Galaxy Mini
----------------------------------------------------Don't forget to Thank
iamareebjamal said:
Thanks for the info
But
It's a misconception that ZRam Tweak lags the device.
And I will add that hell lock info in OP
Click to expand...
Click to collapse
If you see how it really works then you will know how slow it is
Sent from my GT-S5360 using xda app-developers app
Thanx bro,my phone is flying,i m just flashed on Hiperion8 :good:
thanks!this what im looking...
blackpanther2209 said:
thanks!this what im looking...
Click to expand...
Click to collapse
Bro what is NIGHTFIRE patch. from ur signature ???
hell_lock said:
If you see how it really works then you will know how slow it is
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Could you explain?? Like what it actually is and how it works and slows down the phone....
Sent from my GT-S5360 using xda app-developers app
Op update first post requirment must be custom kernel with init.d support not rom
ROM EVOLUTION X3
KERNEL HELL FUSION
ALINS JB THEME + EVOLUTION S3 STATUS BAR.
Want To Ask Question? Ask Here
technosavie said:
Op update first post requirment must be custom kernel with init.d support not rom
ROM EVOLUTION X3
KERNEL HELL FUSION
ALINS JB THEME + EVOLUTION S3 STATUS BAR.
Want To Ask Question? Ask Here
Click to expand...
Click to collapse
Kernel is NOT required to necessarily have init.d support
If you know about the mod by Ryuinferno
You would not say that
pustinjak said:
Bro what is NIGHTFIRE patch. from ur signature ???
Click to expand...
Click to collapse
Some mods given by revanescence.
btw tweaks is awesome with androbot 0.3. I have no problem even i didn't delete the 99complete.:beer::beer::beer:
Sent from my GT-S5360 using Xparent Blue Tapatalk 2
anubhavrev said:
Could you explain?? Like what it actually is and how it works and slows down the phone....
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
google always give you a proper way., and also zram only works if the kernel support it..
and there is also an option for the loopysmothness script.. it will work only if you change the intent (i think) according to the users launcher
like com.sec.android.app.twlauncher - touchwiz
com.sonyericson.home - xperia launcher
Sent from my Android System using Busybox Command.
My work
========================
- AndroBot SGY tweaks
- Nandroid md5 Fixer
- Ext4 to RFS Converter
- (CWM) kernel.tar Installer
- (CWM) Firmware Installer
rio. said:
google always give you a proper way., and also zram only works if the kernel support it..
and there is also an option for the loopysmothness script.. it will work only if you change the intent (i think) according to the users launcher
like com.sec.android.app.twlauncher - touchwiz
com.sonyericson.home - xperia launcher
Sent from my Android System using Busybox Command.
My work
========================
- AndroBot SGY tweaks
- Nandroid md5 Fixer
- Ext4 to RFS Converter
- (CWM) kernel.tar Installer
- (CWM) Firmware Installer
Click to expand...
Click to collapse
Yes, you are right
Mod/script For bindassboost kernel just flash with cwm twrp recover
http://d-h.st/B6K
This zip will give you extream GAMING PERFORMANCE in any ROM.
Flash and feel the difference
For only swap scripts Use this Zip
1)At first delete init.d folder(system/etc/init.d) now Download and flash this
http://d-h.st/Eoa
----------------------------------------------------
For swap+performance Use this Zip
1)At first delete init.d folder(system/etc/init.d) now Download and flash this
http://d-h.st/4Tg
Reboot and enjoy now u have 556 mb swap
Check with terminal emulator
Type free -m hit enter
Don't forget to hit thanx
---------------+---+--++----------------------------
Thanx to xda member Exit_only for direct inject script
-----------------------------------------------------
Resize with these scripts
http://d-h.st/JYp
(Unzip downloaded folder it contains all scripts)
Requirements
(1)In settings make default write disk ur SD card
(2)swap and init.d supported kernel e.g. bindassboast
For thunderzap make it init.d supportive from any method( Google it)
****This zip is made from mobile(want to make one..) Click HERE
Is it true???
Is it true??
what will be advantage of swap???
which storage is used as swap???
paksociety said:
Is it true??
what will be advantage of swap???
which storage is used as swap???
Click to expand...
Click to collapse
It will use unused storage.see my another thread making preswap(1GB RAM) in this a110 themes and apps section
Do i need to create any partition in the sd card???
I ve tried this on mackey 4.1.2 with thunderzap v2 kernel but it doesn't made any difference
ajrock12 said:
Do i need to create any partition in the sd card???
I ve tried this on mackey 4.1.2 with thunderzap v2 kernel but it doesn't made any difference
Click to expand...
Click to collapse
Hi try above zip
Without using this u can't say it doesn't make any difference
Will this work on Canvas HD a116
djkrish5610 said:
Will this work on Canvas HD a116
Click to expand...
Click to collapse
Yes turbo boost swap is for every device.use it.
But u don't have swap support in kernel. So sorry.
Wait till custom kernel
Now enjoying gaming in aura v16 with swap
Fifa 14 work great
operation failed to change for init.d and it scripts(98swap_cache_v256 & 300)
I have a class 4 16 gb sdcard. I'm on 4.2. My apps lag a little. I want better multitasking and more free ram. Will this help with smoothness and multitasking?
dkc379 said:
I have a class 4 16 gb sdcard. I'm on 4.2. My apps lag a little. I want better multitasking and more free ram. Will this help with smoothness and multitasking?
Click to expand...
Click to collapse
Yes RAM is an important factor in multitasking.but u should be on good ROM like Mackay of @khan_frd2002 or on legoice turbo of @bsuhas or on
Aura v16 suvi of @ibshar or tsunami of bond
wooley4766 said:
operation failed to change for init.d and it scripts(98swap_cache_v256 & 300)
Click to expand...
Click to collapse
U should use root privilege of es file explorer then it can change the property of folder or file
nice
one question. can i use it in MIUI 4.2.2 ????
saurabh0291 said:
(1)Download and flash this
http://d-h.st/q5n
(2)reboot and change permission of
Direct inject folder(root>data>direct inject) to rwxrwxrwx from es file explorer
Also do same for init.d and it scripts(98swap_cache_v256 & 300)
Reboot and enjoy now u have 556 mb swap
Check with terminal emulator
Type free -m hit enter
Don't forget to hit thanx
---------------+---+--++---------
Requirements
(1)In settings make default write disk ur SD card
(2)swap and init.d supported kernel e.g. andiroxu kernel,bindassboast
For thunderzap make it init.d supportive from any method( Google it)
****This zip is made from mobile(want to make one..) Click the link below
http://forum.xda-developers.com/showthread.php?t=2530923
Click to expand...
Click to collapse
Wow.....it's working awesome
Sent from my A250 SUVI ROM v16 AURA using XDA Premium 4 mobile app
Is this done or what please comform anybody
Sent from my A250 SUVI ROM v16 AURA using xda app-developers app
Sent from my A250 SUVI ROM v16 AURA using xda app-developers app
hanifvahora said:
Sent from my A250 SUVI ROM v16 AURA using xda app-developers app
Click to expand...
Click to collapse
Not yet....
Use ES file explorer to change the properties of folders
Give it root privilege
Yup its working
this is working on my cell. using Hybrid rainbow Rom.
jayamrutia said:
one question. can i use it in MIUI 4.2.2 ????
Click to expand...
Click to collapse
Hit n try
Will this harm the memory card or phone?
Sent from my A250 SUVI ROM v16 AURA using xda app-developers app