excuse me . i have a question . is it possible to go back to stock rom after flashing a custom rom ? and how can i know my right RUU ?
these our my history :
from stock rom 2.3.5 GB 3.0 Sense with 2.00.002 hboot (i forgot my radio ) --> Flashing --> ICS RUU with 2.02.002 hboot radio 3831.19.00.110_M ---> FLASHING FALLOUT v5 ROM(im using it now)
because im planning to go back to a stock rom .
im a beginner here . but im ready to learn .
can anyone give me some adivce or tips on how doing it ?
thanks ! waiting for you replies ^_^
you can relock bootloader then flash ruu to go back to stock
use fastboot command to get your cid then find the correct ruu
READ all the sticky/index threads in the forum. everything you need to know is already there. and make sure you understand what you need to do before start doing it
okay sir thanks for the tip ..
If I were you, i wont lost root status.
I would flash pre-rooted stock rom. Somewhere in forum (check roms list) is pre-rooted version of 2.10.401.9 ota.
What does it mean ?
You get android 2.3.5 with sense 3.0 and it's rooted (superSU preinstalled). You don't have to relock. You just flash zip like any other custom rom.
remusator said:
If I were you, i wont lost root status.
I would flash pre-rooted stock rom. Somewhere in forum (check roms list) is pre-rooted version of 2.10.401.9 ota.
What does it mean ?
You get android 2.3.5 with sense 3.0 and it's rooted (superSU preinstalled). You don't have to relock. You just flash zip like any other custom rom.
Click to expand...
Click to collapse
okay sir but the problem is i dont know the right RUU for my phone .
thanks for your tip ..
What remusator is talking about is not a RUU. It's the RUU without stock hboot and recovery, it has to be flashed in recovery or in bootloader using a PG88IMG.zip .
There's an ics rom like that somewhere in the forum (not rooted but you can do it yourself).
Tapatalké depuis mon Desire S
chninkel said:
What remusator is talking about is not a RUU. It's the RUU without stock hboot and recovery, it has to be flashed in recovery or in bootloader using a PG88IMG.zip .
There's an ics rom like that somewhere in the forum (not rooted but you can do it yourself).
Tapatalké depuis mon Desire S
Click to expand...
Click to collapse
okay sir
Question is, whether you want stock Gingerbread or stock IceCreamSandwich.
Both able to install without restoring bootloader and loosing root.
For GingerBread (Sense 3.0, Android 2.3.5) check this thread:
http://forum.xda-developers.com/showthread.php?t=1480576
For IceCreamSandwich (Sense 3.6, Android 4.0.4) check this thread:
http://forum.xda-developers.com/showthread.php?t=1858508
But i highly recommend this rom (it's non stock, but best of what i've ever used) - i havent found any bugs yet + it looks great, transitions are smooth
Desire XS RC1 - Android 4.0.4, Sense 4.1 lite
http://forum.xda-developers.com/showthread.php?t=2006392
remusator said:
Question is, whether you want stock Gingerbread or stock IceCreamSandwich.
Both able to install without restoring bootloader and loosing root.
For GingerBread (Sense 3.0, Android 2.3.5) check this thread:
http://forum.xda-developers.com/showthread.php?t=1480576
For IceCreamSandwich (Sense 3.6, Android 4.0.4) check this thread:
http://forum.xda-developers.com/showthread.php?t=1858508
But i highly recommend this rom (it's non stock, but best of what i've ever used) - i havent found any bugs yet + it looks great, transitions are smooth
Desire XS RC1 - Android 4.0.4, Sense 4.1 lite
http://forum.xda-developers.com/showthread.php?t=2006392
Click to expand...
Click to collapse
i want to try that DESIRE XS RC1 . i can flash it via fastboot ? coz i only using htcdev unlocked not S-OFF coz i dont know how to S-Of my phone ..
2easy4you said:
i want to try that DESIRE XS RC1 . i can flash it via fastboot ? coz i only using htcdev unlocked not S-OFF coz i dont know how to S-Of my phone ..
Click to expand...
Click to collapse
Flash the zip in recovery, then reboot to bootloader and flash the boot.img (extracted from zip) in fastboot.
teadrinker said:
Flash the zip in recovery, then reboot to bootloader and flash the boot.img (extracted from zip) in fastboot.
Click to expand...
Click to collapse
okay sir thanks i have one question . for yo what is best rom now that i can flash via htc dev unlocked ?
2easy4you said:
okay sir thanks i have one question . for yo what is best rom now that i can flash via htc dev unlocked ?
Click to expand...
Click to collapse
It's impossible to say which rom is "the best", that depends on how you use your phone, personal preference etc.
I would suggest trying a few different roms, to see which you like best.
Related
Hello, I have android 2.3.4. Can i install custom Rom base on 2.3.5 or 2.3.7 ?
if not, how can i update from 2.3.4 to higher ?
You need to S-OFF and then flash a custom ROM as there's nothing officially released higher than 2.3.4
So...It doesnt matter if i install Custom Rom based on 2.3.4 or based on 2.3.5 ?
or should i install 2.3.5 first, then install custom rom for 2.3.5 ?
s-off necessary
You can do only for 2.3.4 as far as I know .no need to upgrade the stock Rom before root.and make sure u follow the instructions carefuly .in the development forums u can find a nice guide on how to s-off .debrand and flash your senny
Sent from my HTC Sensation using xda premium
As EddyOs already metioned
You need to S-OFF and then flash a custom ROM as there's nothing officially released higher than 2.3.4
You can't flash a custome ROM over a stock rom if the phone is not S-OFF.
Look at this thread
http://forum.xda-developers.com/showthread.php?t=1192300
For as far as I know, you can install any custom rom/kernel on your sensation as long if its s-off and rooted.
Hi everyone!! Have a question to ask and was wondering if anyone could help.
Right so this my situation:
I own a HTC Sensation XE, I have S-OFF, Rooted and SuperCID.
So basically i'm all set for custom roms (gingerbread ones anyway).
I have also installed a custom rom (Pyramid3D v8.3.0 - gingerbread based).
Now I am considering upgrading and installing a ICS based custom rom, however it appears that in order to use the ICS based roms, I have to flash new firmware.
Now I have no problem with doing that, I understand how to do that.
My question is:
If I upgrade the firmware and install an ICS based custom rom, but for whatever reason I do not like it, can I then simple downgrade back to a gingerbread rom?
Will a gingerbread rom work fine with the newer firmware?
Do I have to downgrade the firmware back?
Is there any disadvantage to using the newer firmware on gingerbread if possible?
Is the downgrade as simple as installing any other rom? - if that possible
Thanks in advance for help you guys can give!! Appreciate it!!
dontmess said:
Hi everyone!! Have a question to ask and was wondering if anyone could help.
Right so this my situation:
I own a HTC Sensation XE, I have S-OFF, Rooted and SuperCID.
So basically i'm all set for custom roms (gingerbread ones anyway).
I have also installed a custom rom (Pyramid3D v8.3.0 - gingerbread based).
Now I am considering upgrading and installing a ICS based custom rom, however it appears that in order to use the ICS based roms, I have to flash new firmware.
Now I have no problem with doing that, I understand how to do that.
My question is:
If I upgrade the firmware and install an ICS based custom rom, but for whatever reason I do not like it, can I then simple downgrade back to a gingerbread rom?
Click to expand...
Click to collapse
Only if you have a GB compatible firmware installed.
Will a gingerbread rom work fine with the newer firmware?
Click to expand...
Click to collapse
Depends, 1.23 (from 3.12) should work fine. 1.27 (from 3.24) won't.
Do I have to downgrade the firmware back?
Is there any disadvantage to using the newer firmware on gingerbread if possible?
Click to expand...
Click to collapse
You'll need HBOOT 1.23 or 1.17 to boot GB ROMs. I used 1.23 for a while with ICS and CM7. I've only recently gone to the unlocked 1.27 F/W, seems more stable on ICS. I think I noticed a battery life benefit with CM7 & 1.23, so an advantage.
Is the downgrade as simple as installing any other rom? - if that possible
Click to expand...
Click to collapse
You need to do it via the PG58IMG.zip method rather than recovery.
Thanks in advance for help you guys can give!! Appreciate it!!
Click to expand...
Click to collapse
dontmess said:
Hi everyone!! Have a question to ask and was wondering if anyone could help.
Right so this my situation:
I own a HTC Sensation XE, I have S-OFF, Rooted and SuperCID.
So basically i'm all set for custom roms (gingerbread ones anyway).
I have also installed a custom rom (Pyramid3D v8.3.0 - gingerbread based).
Now I am considering upgrading and installing a ICS based custom rom, however it appears that in order to use the ICS based roms, I have to flash new firmware.
Now I have no problem with doing that, I understand how to do that.
My question is:
If I upgrade the firmware and install an ICS based custom rom, but for whatever reason I do not like it, can I then simple downgrade back to a gingerbread rom?
Will a gingerbread rom work fine with the newer firmware?
Do I have to downgrade the firmware back?
Is there any disadvantage to using the newer firmware on gingerbread if possible?
Is the downgrade as simple as installing any other rom? - if that possible
Thanks in advance for help you guys can give!! Appreciate it!!
Click to expand...
Click to collapse
Short answers to your questions:
Yes - but you need to downgrade the firmware
No
Yes
You can't use new firmware with Gingerbread
Yes
Detailed stuff can be found in this most helpful post: http://forum.xda-developers.com/showthread.php?t=1480061
I think you'll find it worthwhile to move to ICS. Good luck.
edit: Doh! Missed it by that much....
cr1960 said:
Short answers to your questions:
Yes - but you need to downgrade the firmware
No
Yes
You can't use new firmware with Gingerbread
Yes
Detailed stuff can be found in this most helpful post: http://forum.xda-developers.com/showthread.php?t=1480061
I think you'll find it worthwhile to move to ICS. Good luck.
Click to expand...
Click to collapse
+1 on the move to ICS.
My question is:
If I upgrade the firmware and install an ICS based custom rom, but for whatever reason I do not like it, can I then simple downgrade back to a gingerbread rom?
Only if you have a GB compatible firmware installed.
So if I was to install 3.24 then GB roms most likely wouldn't work?
Do I have to downgrade the firmware back?
Is there any disadvantage to using the newer firmware on gingerbread if possible?
You'll need HBOOT 1.23 or 1.17 to boot GB ROMs. I used 1.23 for a while with ICS and CM7. I've only recently gone to the unlocked 1.27 F/W, seems more stable on ICS.
So 1.23 is the best bet if I want to "try" ICS and then can go back if I choose
Another question which I also have then is:
Some ICS roms say that they require firmware 3.24. To clarify, If I install this firmware and an ICS rom, there will be no way for me then install most GB roms (broadly speaking).
dontmess said:
My question is:
If I upgrade the firmware and install an ICS based custom rom, but for whatever reason I do not like it, can I then simple downgrade back to a gingerbread rom?
Only if you have a GB compatible firmware installed.
So if I was to install 3.24 then GB roms most likely wouldn't work?
Do I have to downgrade the firmware back?
Is there any disadvantage to using the newer firmware on gingerbread if possible?
You'll need HBOOT 1.23 or 1.17 to boot GB ROMs. I used 1.23 for a while with ICS and CM7. I've only recently gone to the unlocked 1.27 F/W, seems more stable on ICS.
So 1.23 is the best bet if I want to "try" ICS and then can go back if I choose
Another question which I also have then is:
Some ICS roms say that they require firmware 3.24. To clarify, If I install this firmware and an ICS rom, there will be no way for me then install most GB roms (broadly speaking).
Click to expand...
Click to collapse
From the thread: http://forum.xda-developers.com/showthread.php?t=1459767
You can reflash an earlier F/W so go back to 1.17, as always if it screws up it screws up. It's the sort of thing I tried to avoid where possible, but sometimes is necessary.
One point though, when you flash 1.23 or 1.27 you'll get a new Radio. If you regress the F/W to 1.17 you'll need to flash a compatible Radio as well.
You "should" be able to try before you buy ICS on 1.23 and also go back to GB. That said, I've found my current combo (VI 3.0.5b7 and 1.27.1100) more stable than an earlier version of the ROM was on 1.23.
Another question which I also have then is:
Some ICS roms say that they require firmware 3.24. To clarify, If I install this firmware and an ICS rom, there will be no way for me then install most GB roms (broadly speaking).
Click to expand...
Click to collapse
NO GB on this F/W
Hi every one, I have recently purchased an HTC Sensation XE. I have read and done all the tips several times regarding S-off, Super CID, Rooting. I have S-off and rooted the device. My CID 111111. I don't know why somehow I can only install OrDroid 1.6.1, and upgrade to OrDroid 1.6.2 only and no other ROMs. Could anyone possibly help me to see where I am going wrong? Thank you in advance.
Make sure ur firmware is 3.32 ...
And some phones get.bootlop.bcoz. of the oc kernel make sure u get the one without oc
Than try insertcoin beta 12 works great since u using sense 4.0
Sent from my HTC Sensation Z710e using xda premium
pop1290 said:
Hi every one, I have recently purchased an HTC Sensation XE. I have read and done all the tips several times regarding S-off, Super CID, Rooting. I have S-off and rooted the device. My CID 111111. I don't know why somehow I can only install OrDroid 1.6.1, and upgrade to OrDroid 1.6.2 only and no other ROMs. Could anyone possibly help me to see where I am going wrong? Thank you in advance.
Click to expand...
Click to collapse
What firmware is in your bootloader? When you are flashing a rom and it requires a specific Firmware you will need to update that firmware to that roms requirements. First time Flashing also requires a full wipe. . There is a firmware thread in sensation development and how to's. Example.. If i want sense 3.6 rom or new 4.0 rom I would flash firmware 3.32. If your not sure how firmware flashes read up on it. It can cause bootloops if your not flashing the proper zips. Welcome to the world of SENSATION..
mckellick said:
What firmware is in your bootloader? When you are flashing a rom and it requires a specific Firmware you will need to update that firmware to that roms requirements. First time Flashing also requires a full wipe. . There is a firmware thread in sensation development and how to's. Example.. If i want sense 3.6 rom or new 4.0 rom I would flash firmware 3.32. If your not sure how firmware flashes read up on it. It can cause bootloops if your not flashing the proper zips. Welcome to the world of SENSATION..
Click to expand...
Click to collapse
Thanks again, My firmware is 3.32 . I have followed the instruction on
http://forum.xda-developers.com/showthread.php?t=1459767
several times but no luck. I flashed ROM InsertCoin it is working perfect. but still no luck with other roms. to be more specific for example I would like to flash ROM : Android Revolution HD™ 6.5.2 | ICS |
Flashed Firmware 3.32 , and then the ROM, I still get loop.
pop1290 said:
Thanks again, My firmware is 3.32 . I have followed the instruction on
http://forum.xda-developers.com/showthread.php?t=1459767
several times but no luck. I flashed ROM InsertCoin it is working perfect. but still no luck with other roms. to be more specific for example I would like to flash ROM : Android Revolution HD™ 6.5.2 | ICS |
Flashed Firmware 3.32 , and then the ROM, I still get loop.
Click to expand...
Click to collapse
Hey pop did ya delete the firmware file you flashed right after you updated it into bootloader? Usually that PG58IMG which would be your firmware file zip should be deleted off your SDcard right after you bootloaded it. And also let me remind ya that even its a lower firmware like 3.24 or less it will have that same PG58IMG file name saved on your wherever downloaded too. So make sure your installing that correct PG58IMG firmware. Other than that ..try a step down from 3.32 and see if that works with the ARHD Rom.
" The Official Rom Zombie "
sent from the back of the Ice Cream Truck using a killer Sensation
Try the 3.30 firmware. If not just double check to see if you downloaded the right firmware 3.32. Like for me I'm a T-Mobile user so I had to download the T-Mobile version firmware.. hope that helps..
" The Official Rom Zombie "
sent from the back of the Ice Cream Truck using a killer Sensation
I'm not sure if you just mistype it but check you cid again... Looks like you miss one more 1
Sent from my HTC Sensation 4g with Beats Audio
hi every one
i have htc sensation roted & s-off with android 2.3.5 & kernal 2.6.35.10_cyanogen
My prblem is that i canot flash any MIUI rom even if i restore my original rom (nandroid) so what can i do to
install MUIU rom like (([ROM] [29-03] TripNMiUI V4 - MIUI ICS | B008 | Everything fixed))????
You should install 3.32/3.33 firmware.. To hold ics roms.. It's roms won't work on gingerbread firmware
Search for kohr-ah thread on firmwares.. In sensation development section
Sent from my HTC Sensation 4G using xda premium
correct to me please
dear i leave in Syria & some times if we changed to the kernel you advice with. that its suitable whit ics, we may have some troubles in wifi& camera.....etc.
so is that true that: if i changed my CID number from HTC___44 to super CID HTC___111111.THEN install your kernel ...????
but then if i have any problem can i solve this by/or can i re-install my original kernel and be on my old sittings without any problems i may have....??? because i heard the super CID allow us to re-change the kernels easily between new&old ???
Great onzo said:
dear i leave in Syria & some times if we changed to the kernel you advice with. that its suitable whit ics, we may have some troubles in wifi& camera.....etc.
so is that true that: if i changed my CID number from HTC___44 to super CID HTC___111111.THEN install your kernel ...????
but then if i have any problem can i solve this by/or can i re-install my original kernel and be on my old sittings without any problems i may have....??? because i heard the super CID allow us to re-change the kernels easily between new&old ???
Click to expand...
Click to collapse
wait wait wait .its not kernel im talking about im talking about firmware
let me clarify you couple of things
sensation can be divided this way ..
hardware + recovery (stock/cwm/4EXT etc etc) + firmware (radio + bootloader + others) + ROM (boot (aka kernel) + system + data)
now im talking about firmware part
if you want ICS ROM ..you need ICS compatible firmwares 3.32/3.33
and for gingerbread ROM (which you are currently having ) requires GB compatible firmware 1.17
and kernel is part of ROM ..it comes with ROM
now you were unable to boot MIUI ICS version ..you have GB firmware thats why you were unable to boot
just flash 3.32 or 3.33 firmware and then MIUI ICS you will come out fine (btw after flashing 3.32 or 3.33 firmware you cant boot to your 2.3.5 ROM as its not compatible but you can backup it from recovery)
now with regards to CID ..you need not change it anymore ..as it became obsolete
all the firmwares comes universal ..means works with any cid's
here is the firmware thread
hi
i have rom Blue Donkey v1.10 with bulid number 2.14.401.6
my phone is s-on and i wanna back to stok(base rom) rom from 2.14.401.6 to ruu arabic 2.14.415.2
my before devices phone is one sv k2_ul with build number 2.14.415.2 and android version JB 4.1.2
i needed to RUU k2_ul 2.14.415.2
plz help me.. friend
iusce said:
hi
i have rom Blue Donkey v1.10 with bulid number 2.14.401.6
my phone is s-on and i wanna back to stok(base rom) rom from 2.14.401.6 to ruu arabic 2.14.415.2
my before devices phone is one sv k2_ul with build number 2.14.415.2 and android version JB 4.1.2
i needed to RUU k2_ul 2.14.415.2
plz help me.. friend
Click to expand...
Click to collapse
Hi.
Best solution : restore your cwm backup.
But i guess you might not have any...
There aren't any RUU for branded One SV's roms, as far as I know, but let me just ask : why you want to go back to a branded rom ?
Matlevo12 said:
Hi.
Best solution : restore your cwm backup.
But i guess you might not have any...
There aren't any RUU for branded One SV's roms, as far as I know, but let me just ask : why you want to go back to a branded rom ?
Click to expand...
Click to collapse
Hi
Thanks for the help you
I could have to branded rom But I noticed that there is a general problem this rom!!!! And I came back again to custom rom
My main reason for returning to stock rom or baranded rom:Back to the warranty conditions
thank you..
Ok.
Without a ruu matching your original cid there's no way (that i know of) to go back to a branded factory phone. But I'm pretty sure that if you just reset it to unbranded stock (there's a guide on how to do that somewhere, I'll try and find it if you don't), you won't have a problem with your warranty.
Since your phone'll be back to S-ON, locked bootloader (not relocked), original stock recovery, boot and rom, it'll be the same as a new one.
If yoy want to use your warranty, I'd suggest that, but if you're just worried about having messed with your phone by unbranding, rooting, using custom roms or custom recovery... well stop worrying, you're fine, evreything's ok (as long as you keep following the guides' instructions carefully !).
Just to be sure, is arabic available in the SV stock roms ?
That's what you're missing, right ?