Related
Recently I got a new vehicle (Toyota RAV4) so I connected my s3. Via Bluetooth. However every rom Ive tried, both tw and aosp have this crackle and pop (snap?) coming through the speakers. I dont know if this is a problem with the phone or the car or rom, kernel, etc but am looking for suggestions. Thanks.
Sent from my SCH-I535 using xda app-developers app
I bought my first GS3 pre order. I had the same crackle coming through any Bluetooth device I used. Since I stream Sirius all day, every day it was a huge issue. So I called vzw and they replaced with a brand new one. But, I was within the first 15 days of purchase. They documented the issue so they should know that some units have this issue. Get it replaced.
I called Verizon and their answer was that it has been a reported issue and that they are working on it with Samsung. I asked about replacing it but their answer was that it would basically continue to happen with the new one they send me and a software issue is the key. Did your replacement fix the issue?
Sent from my SCH-I535 using xda app-developers app
Had the same crackle when I first received my S3 with a headset, but not with veh or home dongles. VZW said it has to be the headset. Funny thing is it was only 2 months old and worked like a champ on my DX. Tried a couple of other devices, no problems. Last resort was a factory reset, just for the sake of trying it. Resync'd all BT devices and never had a problem since. Definitely not a confirmed fix, but if kicking the side of the TV worked for dad, I'll give it a try.
Verizon is sending me a new one. I explained that if this was such a small scale issue, then it must be hardware. Otherwise more people would have reported it. And If Im wrong then I'll still have a new unit and will wait for a software patch. Either way I win.
Sent from my SCH-I535 using xda app-developers app
Edit: On a whim I loaded cleanROM and no Bluetooth crackle. This is amusing at best.
Sent from my SCH-I535 using xda app-developers app
I found that I got rid of bluetooth crackle by increasing voltages on my custom kernels (i switch between lean kernel and ktoonz). Seems like certain S3s have this problem when running below certain voltages. Currently have my lowest voltages at 925mv and progressive increase with steps, but I read the normal magic number is 1150. Try increasing your base voltages to 1150 (if your on custom rom and kernel of course) and see if that fixes the problem. If it does, you can experiment with lower voltages until the crackle reappears, to find your phones sweet spot.
Sent from my SCH-I535 using xda premium
Have also seen it fixed with kernel changes.
Hmmm. I will try this..
Sent from my SCH-I535 using xda app-developers app
My replacement works perfectly.
Sent from my SPH-L710 using Tapatalk 2
My replacement should be here tomorrow. Hopefully this solves the issue.
Sent from my SCH-I535 using xda app-developers app
So I received my replacement and it works perfectly as stock. I rooted and deleted a number of bloatware apps too.
There is no hiss or crackle from either the headset jack or Bluetooth media, Pandora or other third party apps.
Sent from my SCH-I535 using xda app-developers app
So, I'm confused about this:
On CM10, Bluetooth didn't work AT ALL. But I don't know if the 10/12 nightly had the right bluetooth decoding values.
On LiquidSmooth, I could get some audio now, but with constant crackling.
On ParanoidAndroid, I get audio, no problems.
What's the difference here? Is it just voltages? Should I just ask Verizon for a new device? It's been 5 days since I activated this one.
rampantandroid said:
So, I'm confused about this:
On CM10, Bluetooth didn't work AT ALL. But I don't know if the 10/12 nightly had the right bluetooth decoding values.
On LiquidSmooth, I could get some audio now, but with constant crackling.
On ParanoidAndroid, I get audio, no problems.
What's the difference here? Is it just voltages? Should I just ask Verizon for a new device? It's been 5 days since I activated this one.
Click to expand...
Click to collapse
Return it. Its defective
Sent from my SCH-I535 using xda app-developers app
pmdied said:
Return it. Its defective
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I thought I had it working until last night when it crapped out again.
I actually regret going from the iphone to android right now. No single phone seems to be well made.
By experimenting on my drive in, this is entirely related to voltages/CPU speed. I don't have voltage control right now, but just kept upping my core clock until the crackling stopped. Around 900mhz everything became fine. Below 900, BT audio would pop. BT calls would last a few minutes, before suddenly dropping from my car. The car would still show being connected to BT, but the call would suddenly be on the handset.
sfetaz said:
I found that I got rid of bluetooth crackle by increasing voltages on my custom kernels (i switch between lean kernel and ktoonz). Seems like certain S3s have this problem when running below certain voltages. Currently have my lowest voltages at 925mv and progressive increase with steps, but I read the normal magic number is 1150. Try increasing your base voltages to 1150 (if your on custom rom and kernel of course) and see if that fixes the problem. If it does, you can experiment with lower voltages until the crackle reappears, to find your phones sweet spot.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I can agree with your findings. I have had issue with the bluetooth audio crackling with multiple roms and kernels. I found that by increasing your min voltage to at least 1026MHz that it will make the crackling go away (I am running slim 2.7 / lk v1.4). On some CM10 builds (without flashing a custom kernel), I have noticed that I don't even need to set the min voltage and works just fine. I use bluetooth everyday (car/home/work) and it gets some what irritating when I have to set the min voltage higher every time I connect to bluetooth. Is there any way you can set a custom profile to set the min voltage? I currently use Rom Toolbox Pro and it does not have an option to choose a custom profile for bluetooth. I also tried SetCPU App but it does not seem to work when I set the custom profile with the music app that I use. Any ideas to set a custom profile whenever I connect to bluetooth? Any help would be much appreciated
Just call Verizon and explain your issue. I had the same problems on any Rom and I tested in on several vehicles. They shipped me a new one the next day and no issues.
Sent from my SCH-I535 using xda app-developers app
pmdied said:
Just call Verizon and explain your issue. I had the same problems on any Rom and I tested in on several vehicles. They shipped me a new one the next day and no issues.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yeah, same. They sent mine out today. I'll post the results here.
Sent from my SCH-I535 using xda app-developers app
rampantandroid said:
Yeah, same. They sent mine out today. I'll post the results here.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Oh, forgot to post: seems to be fixed. So just get a new device sent to you...
Hello friends I open this topic because I have a HTC One X ATT and install the 3.1.0 rom ViperXL Jelly Bean. Everything works fine except the headphone input. when I connect the headphones do not work and neither does the headset connected icon.
someone else this happened to you or if you have solution.
Thank you very much and greetings
Whenever headset routing seems to be broken, I always use the app "soundabout". Its free in play store
Sent from my One X using xda app-developers app
Did you factory reset, and wipe Dalvik and cache?
Dirty re-flash couldn't hurt either.
thanks friend but the application did not work Soundabout
Sent from my HTC One XL using xda premium
redpoint73 said:
Did you factory reset, and wipe Dalvik and cache?
Dirty re-flash couldn't hurt either.
Click to expand...
Click to collapse
If when installing the ron did factory reset, and supe dalvik and caché. I will try to reflash again
Sent from my HTC One XL using xda premium
friend did everything you said and nothing, not working yet input headphones
Sent from my HTC One XL using xda premium
Odd. Did you read/search through the ViperXL thread to see if anyone else is having a similar issue?
anyelussk8 said:
Hello friends I open this topic because I have a HTC One X ATT and install the 3.1.0 rom ViperXL Jelly Bean. Everything works fine except the headphone input. when I connect the headphones do not work and neither does the headset connected icon.
someone else this happened to you or if you have solution.
Thank you very much and greetings
Click to expand...
Click to collapse
I installed this ROM last night and haven't had any issues with it at all. Headset and all audio works fine. I use it through my car stereo as well since I don't listen to regular radio that often anymore.
I would suggest a full wipe and a re-flash. It's a great ROM and about as user-friendly customizable as they come.
And welcome to XDA
I'm having problems with bluetooth & headset buttons. Will not press skip pause etc.
insanecrane said:
I installed this ROM last night and haven't had any issues with it at all. Headset and all audio works fine. I use it through my car stereo as well since I don't listen to regular radio that often anymore.
I would suggest a full wipe and a re-flash. It's a great ROM and about as user-friendly customizable as they come.
And welcome to XDA
Click to expand...
Click to collapse
Ok. I will install the ROM again and make him a full erase my cell and re-flash again. When finished I tell how I was.
Thank you.
Sent from my HTC One XL using xda premium
ajumatt said:
I'm having problems with bluetooth & headset buttons. Will not press skip pause etc.
Click to expand...
Click to collapse
On ViperXL, or in general (did it work on another ROM)?
What headset? For any headset intended for use with iPhones, the buttons won't work correctly on our phone.
I'm on 3.1.0 and my headset and beats works fine been using it all day
Thank you all for answering but I did everything and reach the conclucion that hadware damage the headphones. I think it was for connecting to stereo or something :banghead:
Sent from my HTC One XL using xda premium
redpoint73 said:
On ViperXL, or in general (did it work on another ROM)?
What headset? For any headset intended for use with iPhones, the buttons won't work correctly on our phone.
Click to expand...
Click to collapse
Well, I have a Belkin Tunecast Auto system in my car. The buttod does not work at all. It works with my other phones. It used to work on Cleanrom 5.1. I'm considering going back to Cleanrom 5.1 or waiting for JokerXL 3.0.
anyelussk8 said:
Thank you all for answering but I did everything and reach the conclucion that hadware damage the headphones. I think it was for connecting to stereo or something :banghead:
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
i've used Urbeat ! when screen of the button didnt work !
Keep the dev thread clean.
sent from within the beast
Walkman App???
Just wondering if I can install the Walkman app on top of this ROM. personally don't like Apollo?
suck it monkeys said:
Just wondering if I can install the Walkman app on top of this ROM. personally don't like Apollo?
Click to expand...
Click to collapse
I hate Apollo as well.
About walkman you'll have to tell us because idk
Sent from my Galaxy Nexus using xda premium
I'm having trouble getting WiFi working...
Sent from my SGH-T959V using xda app-developers app
Lesorin said:
I'm having trouble getting WiFi working...
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
Probably because it doesn't work in any released 4.2.2 yet except using the tempfix hack in the general forum section.
With the WiFi fix and twrp. I am really liking this ROM...thanks Beastmode...
I think it just replaced slim 4.1.2
as my DD.
Sent from my SGH-T959V using xda premium
GPS
Im a little confused I don't see the GPS toggles Does this Rom not have GPS yet? Other then that Damn this is nice and smooth like butter.
I'm just wondering, is the phone call hearing problem still a bug in 4.2.2 or is it fixed? Also does YouTube work? These are the only 2 reasons why I am hesitating to flash this.
AnAznBoy9724 said:
I'm just wondering, is the phone call hearing problem still a bug in 4.2.2 or is it fixed? Also does YouTube work? These are the only 2 reasons why I am hesitating to flash this.
Click to expand...
Click to collapse
YouTube works fine for me, just
checked it. Calling works great too
Speaker and regular.. Don't see any problems..hearing is fine.
Sent from my SGH-T959V using xda premium
So phone calls are able to be heard from the ear-piece instead of speaker?
Edit: Can someone answer this please?
Was about to install the new 10.1 update and saw this, so many choices! Installing this one as we speak, can't wait to try it out.
anyone notice any auto brightness changes?
is auto brightness working correctly.?
Lol. It's suck to see you guys enjoying new roms. My phone was busted in the washing machine by accident. I am waiting for a new motherboard to arrive to fix it.
Sent from my SGH-M919 using xda premium
Beastmode said:
anyone notice any auto brightness changes?
is auto brightness working correctly.?
Click to expand...
Click to collapse
Yes I love it it adjusted perfectly l. Outside in the sun it went to full brightness and in dark it goes down its perfect
Sent from my SGH-T959V using xda app-developers app
Beastmode said:
I hate Apollo as well.
About walkman you'll have to tell us because idk
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I've been using the Neutron Music Player. The sound quality is amazing, but most people don't like the UI. I actually kind of like the interface though and the sound is simply amazing.
Tethering via wifi
Is this possible on the rom? I tried it just laughed at me and called me fat (well it did not work but hey) Making sure i did not miss something.
Did you try using Barnacle or the Wifi tethering for root users apps previously suggested for people with problematic tethering?
Fixing the built-in wifi tethering is a goal, but one that probably needs wifi itself to properly work first. Or at least, to work without needing to be activated through another script...
Theraze said:
Did you try using Barnacle or the Wifi tethering for root users apps previously suggested for people with problematic tethering?
Fixing the built-in wifi tethering is a goal, but one that probably needs wifi itself to properly work first. Or at least, to work without needing to be activated through another script...
Click to expand...
Click to collapse
I have not but i will try that now. thanks for the advice i'm still a rookie at all this
Beastmode said:
I hate Apollo as well.
About walkman you'll have to tell us because idk
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Walkman app works. attached is link
http://droidviews.com/2013/install-...bum-apps-from-xperia-z-on-your-android-phone/
OK just a few tips to get beanstalk smooth. Install nova launcher holo seemed to lag allot. Install seeder and root cleaner. Im not sure but using the xposed installer seemed to make the ROM respond better. Now my beanstalk is silky smooth
Sent from my SGH-T959V using xda app-developers app
I am using android1234567 cm10.2 rom and have noticed that since being built with linaro.
I have been getting a robotic sound when making calls.
I need to turn the speaker on and off for the call to sound normal again.
this is something I used to get on albinomans cm10.1 and only started getting the issue with the 26/8 build of android 1-7
mms? google gallery?
Hey all,
first of all, android1-7, congrats for a great and super-fast rom!!! I really love it, especially the 624 version (yeah, chrome finally works ok ).
However, I've got some (minor) problems (and still cannot post in the original thread):
1) mms is not working for me. tried sending it to myself and after 4 days still nothing. any solutions?
2) i'd like to have google gallery (photosphere ) -- tried downloading it and installing and after a while it just says 'App not installed'. It worked on 4.0.4 rom; have tried two different apks, and still the same ...
3) i cannot change the maximum cpu frequency in 'performance'. it just stays at 1.5GHz. How to do that?
Any help is greatly appreciated!
cheers
---------- Post added at 09:24 AM ---------- Previous post was at 09:00 AM ----------
Ad 3: in 8-27 build the changing of cpu frequency works! cool!
nick.christ said:
I am using android1234567 cm10.2 rom and have noticed that since being built with linaro.
I have been getting a robotic sound when making calls.
I need to turn the speaker on and off for the call to sound normal again.
this is something I used to get on albinomans cm10.1 and only started getting the issue with the 26/8 build of android 1-7
Click to expand...
Click to collapse
My voice calls work perfectly normal since (one of the) the first build(s). Did you do the full wipe?
strahc said:
2) i'd like to have google gallery (photosphere ) -- tried downloading it and installing and after a while it just says 'App not installed'. It worked on 4.0.4 rom; have tried two different apks, and still the same ...
Click to expand...
Click to collapse
Try to use a root file manager to rename gallery.apk under /system/app and install the 3d Gallery apk for HTC One play edition. This works for me but the photosphere is not as good as that in a new Nexus 7 probably because of less memory available.
Sent from my Nexus 7 using xda app-developers app
heanseng, thanks - that did it!
Yaay for photosphere
strahc said:
My voice calls work perfectly normal since (one of the) the first build(s). Did you do the full wipe?
Click to expand...
Click to collapse
I did a full wipe when first coming to this ROM. Now for every update I have been wipinig cache and dalvik only.
I just flashed the latest 27/8 build so I'll see how this goes I guess.
Sent from my HTC Sensation using xda app-developers app
Before I get carried away with nit picking and complaining just wanna say
how much i love these roms. Ever since i had cyanogen on my wildfire i haven't been able to stick to anything else!
Super fast, clean and simple! Love it!
nick.christ said:
I did a full wipe when first coming to this ROM. Now for every update I have been wipinig cache and dalvik only.
I just flashed the latest 27/8 build so I'll see how this goes I guess.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
I've been having this problem for months now even with a full wipe. I thought it was just phone. It didn't bug me enough to fix it.
Sent from my HTC Sensation 4G using XDA Premium 4 mobile app
CerealFTW said:
I've been having this problem for months now even with a full wipe. I thought it was just phone. It didn't bug me enough to fix it.
Sent from my HTC Sensation 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Its OK when I make the call but when I answer a call and it goes straight into robot voice it can be annoying.
Sent from my HTC Sensation using xda app-developers app
nick.christ said:
Its OK when I make the call but when I answer a call and it goes straight into robot voice it can be annoying.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
Oh. Mines only when I call others. I've never had it happen when answering. You could send a bug report to the dev and post in this thread and probably get a better response. Sorry man I can't help much :-/ maybe if you did a full wipe(everything besides sdcard, not just phone reset) and reflashed the newer version of the Rom. I doubt it, but I hope that helps haha
Sent from my HTC Sensation 4G using XDA Premium 4 mobile app
I do also get it when making calls but I can deal with that. Anyway so far it hasn't happened on the 27/8 build.
Sent from my HTC Sensation using xda app-developers app
Full clean install of 3/09 and still have robotic voice issues when making calls.
Is quite frustrating to have to press loudspeaker button twice to correct the audio being heard through the speaker.
This for me is way more frustrating than a buggy camera.
Sent from my HTC Sensation using xda app-developers app
igiogs thousand
nick.christ said:
Full clean install of 3/09 and still have robotic voice issues when making calls.
Is quite frustrating to have to press loudspeaker button twice to correct the audio being heard through the speaker.
This for me is way more frustrating than a buggy camera.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
That's a rom bug wait to be fixed
I don't know if this problem is rom specific, but..
for me to use usb tethering in windows I need to update the driver every time I want to use it.
then to get mass storage device back I again need to update the driver to recognise the phone.
this is something I didn't experience in the stock sense rom.
seems like the signal the pc is getting is confused and cant assign different drivers for different outputs from the phone???
I noticed that since 9/15 build the camera focus does not focus correctly
Just had a totally random reboot
Sent from my HTC Sensation using xda app-developers app
nick.christ said:
Just had a totally random reboot
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
That'll be fixed tomorrow.
Sent from my HTC Sensation using xda app-developers app
Was on the 9/15 build with stock kernel
Sent from my HTC Sensation using xda app-developers app
I installed Cyanogenmod 11 on my HTC One Mini and have been experiencing mic sensitivity issues. People cannot hear me on skype, and when I call people they say it sounds like im holding my mic 10ft away. Is there any apps or tweaks that would allow me to boost the sensitivity of my mic.
Sent from my One Mini using xda app-developers app
TRIBLAST said:
I installed Cyanogenmod 11 on my HTC One Mini and have been experiencing mic sensitivity issues. People cannot hear me on skype, and when I call people they say it sounds like im holding my mic 10ft away. Is there any apps or tweaks that would allow me to boost the sensitivity of my mic.
Sent from my One Mini using xda app-developers app
Click to expand...
Click to collapse
Try my kernel n see if the issue persists
Sent from my unknown using Tapatalk
I know this might sound bad but how do I flash the kernal.
Sent from my One Mini using xda app-developers app
In recovery
Sent from my unknown using Tapatalk
I did this, it said it was successful, I rebooted, got "android is upgrading", let it upgrade, after I checked my kernel and it didnt change. Its still the same one.
Sent from my One Mini using xda app-developers app
The One Mini seems to be having some microphone issues with the CyanogenMod. In my case Viber is very silent and people on the other end can barely hear me. Regular phone calls work fine but only if I'm not using hands-free, with the hands-free the mic problem appears again.
I'm waiting to see if this will be fixed once a stable version of the CM11 is released, we can't expect everything to be working flawlessly with nightly builds