I am asking this here because i think it may be pretty "general"
I am attempting to flash JB to my phone (SGH I727),,,Tried liquid smooth last night,,all seemed to go well,,re boot to "liquid smooth animated screen,,and stayed all night. I figured it didn't take,,so I have tried slim bean this morning and it seems to be hung on the open animate screen. Any advice?
You are in a boot loop. Re flash and wipe cache dalvik.
~-~-~-~-~-~-~-~-~-~-~-~-~
Phone: Samsung galaxy s2 t989
Rom: Jedi knight 6 4.0.4
Kernel: Jedi kernel 2
-~-~-~-~-~-~-~-~-~-~-~-~-
and you thought celebrities weren't smart. =P
ArianaGrande said:
You are in a boot loop. Re flash and wipe cache dalvik.
~-~-~-~-~-~-~-~-~-~-~-~-~
Phone: Samsung galaxy s2 t989
Rom: Jedi knight 6 4.0.4
Kernel: Jedi kernel 2
-~-~-~-~-~-~-~-~-~-~-~-~-
and you thought celebrities weren't smart. =P
Click to expand...
Click to collapse
I have done as instructed twice and I still seem to be getting the boot loop.
I am confident that I have done everything as instructed. Should I just keep trying til it takes? Is the "boot loop" common?
Is it a Rom that is compatible for your device? Try another Rom. See if that works.
~-~-~-~-~-~-~-~-~-~-~-~-~
Phone: Samsung galaxy s2 t989
Rom: Jedi knight 6 4.0.4
Kernel: Jedi kernel 2
-~-~-~-~-~-~-~-~-~-~-~-~-
and you thought celebrities weren't smart. =P
ArianaGrande said:
Is it a Rom that is compatible for your device? Try another Rom. See if that works.
~-~-~-~-~-~-~-~-~-~-~-~-~
Phone: Samsung galaxy s2 t989
Rom: Jedi knight 6 4.0.4
Kernel: Jedi kernel 2
-~-~-~-~-~-~-~-~-~-~-~-~-
and you thought celebrities weren't smart. =P
Click to expand...
Click to collapse
I am sure. SGH-I727,,,I was able to get a slim bean JB ROM to work,,but I did not have any service,,at all. I've reloaded ICS for now. I re-flashed 4 times,,wiped as suggested,,,,boot loop each time.
rockironwebb said:
I am sure. SGH-I727,,,I was able to get a slim bean JB ROM to work,,but I did not have any service,,at all. I've reloaded ICS for now. I re-flashed 4 times,,wiped as suggested,,,,boot loop each time.
Click to expand...
Click to collapse
I have spent quite a bit of time trying to get jelly bean. Tried 3 seperate ROMS, liquid,slim, and another. Both slim and liquid repeatedly got stuck in boot loop,,,,the third worked,,,,but I had absolutely no cell phone service.
Related
Hello,
I edited THIS Rom a bit!
I personaly don't own this Device!
So please test it and also press a thanks to shep211!
It is only for I9100!
Download:
http://www.mediafire.com/?ndxl583lkl61g
Update will follow!
I777??? If so I'm going to be a very happy camper
Sent from my SAMSUNG-SGH-I777 using xda premium
testing
im installing this rom on i777 now. im already running miui.us version. are you gonna be posting the changes you made in this rom? can i or should use siyah kernel with this rom? should i flash my own modem? or reconfigure apn? sorry for all the questions. thank you for making this available for testing.
update-i tried flashing this rom in cwm by its self and with hellraiser and it would install fine when it rebooted it would stay on "samsung galaxy s2" screen. any suggestions? thank you
Changes:
bootanimation.zip (If you don't like it Contact me!)
Performance (Kernel)
much more I forgot!
This Rom is Only for Samsung Galaxy S2 (I9100)!
is this rom miui 4.0 or is its just miui kernel 2 on the ics framework 4.0.1 (Galnet)?
monopoliser said:
is this rom miui 4.0 or is its just miui kernel 2 on the ics framework 4.0.1 (Galnet)?
Click to expand...
Click to collapse
It is ICS!
This member has gone off to greener pastures - but if you still would like stuff done by this Winzip King the links will still remain.
Hi guys does anybody know which kernel is the best for any jelly bean rom (I'm running Liquid Smooth rom 4.1.2 ). Thank you all!
There really ain't much variety. You are probably better of sticking with the kernel each respective Rom includes.
Most JB roms use scott's kernel source, while some have their own kernel (cypher, aocp)..
andros11 said:
There really ain't much variety. You are probably better of sticking with the kernel each respective Rom includes.
Most JB roms use scott's kernel source, while some have their own kernel (cypher, aocp)..
Click to expand...
Click to collapse
I'm glad to see someone else ask this first. Which Infuse JB ROM's actually have their own Kernels? After flashing LiquidSmooth & Scott's Unofficial and seeing the same Samsung Galaxy S splash screen staring at me from my Infuse, I figured they were all the same.
SteveCampsOut said:
I'm glad to see someone else ask this first. Which Infuse JB ROM's actually have their own Kernels? After flashing LiquidSmooth & Scott's Unofficial and seeing the same Samsung Galaxy S splash screen staring at me from my Infuse, I figured they were all the same.
Click to expand...
Click to collapse
Flash my slim bean ROM I've got a different splash screen
Sent from my SGH-I997 using xda premium
FauxAffliction said:
Flash my slim bean ROM I've got a different splash screen
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Yes that was pointed out to me in the thread I made. Maybe you can answer another question? Is the "Samsung" splash screen hard wired into the phone or is it also in the Kernel? Because right now I see it flash the original "Samsung" screen, then the "Galaxy S Cyanogen Mod" screen and finally my boot animation. How many "Splash screens are there?
Hi I just got my samsung galaxy tab 2 10.1 P5113 yesterday and i bricked it by flashing the blamesamsung kernal not noticing the 4.0.4 in the title and its bricked but i can access my CWM and download mode im just hanging at the samsung tab 2 screen. How do i unbrick it and return back to stock?
Tyler.Boston1 said:
Hi I just got my samsung galaxy tab 2 10.1 P5113 yesterday and i bricked it by flashing the blamesamsung kernal not noticing the 4.0.4 in the title and its bricked but i can access my CWM and download mode im just hanging at the samsung tab 2 screen. How do i unbrick it and return back to stock?
Click to expand...
Click to collapse
Flash a ROM, cm10.1 nightly are nice and it will replace the kernel.... Do a data and cache wipe as well.... The apko kernel works to of cm10.1
Also I'm pretty sure u can flash just the boot.IMG from the ROM your on, just extract the zip you installed from and flash it in download mode using ODIN
atrix2 running majicmod
galaxy tab 2 3113 running cm10.1 nightlys
iPhone 4 traded for some computer work... just sits there...
Ok
daavvis said:
Flash a ROM, cm10.1 nightly are nice and it will replace the kernel.... Do a data and cache wipe as well.... The apko kernel works to of cm10.1
Also I'm pretty sure u can flash just the boot.IMG from the ROM your on, just extract the zip you installed from and flash it in download mode using ODIN
atrix2 running majicmod
galaxy tab 2 3113 running cm10.1 nightlys
iPhone 4 traded for some computer work... just sits there...
Click to expand...
Click to collapse
Oh ok thanks! If i ever want to go back to stock jelly bean would there be a way to?
Tyler.Boston1 said:
Oh ok thanks! If i ever want to go back to stock jelly bean would there be a way to?
Click to expand...
Click to collapse
Sure is, you just have to flash the firmware using ODIN.
atrix2 running majicmod
galaxy tab 2 3113 running cm10.1 nightlys
iPhone 4 traded for some computer work... just sits there...
I am running cyanogenmod10.1 on my galaxy s2. It is a wild for the night (nightly unofficial ROM) with 4.2.2 jelly bean build. I love the new ROM but can't believe the stock cyanogenmod kernel can't be over clocked. Anyways I've been looking at kernels that support 4.2.2 and tried to flash lean kernel(and a couple others) in recovery mode. It does a couple things in recovery then says install complete but when I reboot I still have stock cm10.1 kernel! Can somebody please help and I am also open to suggestions for kernels because I want one that runs like the one I have but can be OC'd. THANK YOU!
sent from galaxy s2 running CyanogenMod 10.1
AndroiDisCracK said:
I am running cyanogenmod10.1 on my galaxy s2. It is a wild for the night (nightly unofficial ROM) with 4.2.2 jelly bean build. I love the new ROM but can't believe the stock cyanogenmod kernel can't be over clocked. Anyways I've been looking at kernels that support 4.2.2 and tried to flash lean kernel(and a couple others) in recovery mode. It does a couple things in recovery then says install complete but when I reboot I still have stock cm10.1 kernel! Can somebody please help and I am also open to suggestions for kernels because I want one that runs like the one I have but can be OC'd. THANK YOU!
sent from galaxy s2 running CyanogenMod 10.1
Click to expand...
Click to collapse
Are you wiping cache and dalvik cache? There's really no reason to overclock it dude. I owned an s2 and saw no reason to overclock it ran just fine without hiccups
Sent from my CLEAN Note ll
brandonarev said:
Are you wiping cache and dalvik cache? There's really no reason to overclock it dude. I owned an s2 and saw no reason to overclock it ran just fine without hiccups
Sent from my CLEAN Note ll
Click to expand...
Click to collapse
Yea I wiped both but I wanted to have it to maybe save battery at times(like the lean kernel
) where i can OC at other times. But im starting to think they were bad kernel downloads because i flashed dream kernel and it worked. The site said it supports both JB and ICS but an ICS screen came up in recovery and would not allow reboot or restore to CM10 so I restored to origional s2 rom(running ICS) then reflashed rom and Gapps then restored to CM10 backup so at least I got to where I started XD but thanks
soo i have baked bean rom on my tab right now witch is a unoffical cm10.1 i think and i havent updated it in a long time so i think i should switch to cyangenmod. now i looked at cm10.2 on xda first and i noticed jb bootloaders that you would have to flash with odin, i dont know how to do this, for cm 10.1 should i just have to flash the stable zip and gapps??
I am running the stable release of CyanogenMod 10.1.2_p3100
I downloaded the .zip file and gapps for 4.2.2 and pasted both to my sdcard.
Then I went to CMW mode
cleared the cache,files of previous ROM
flashed the CM10.1.2 stable release for p3100 zip
after that again I flashed the gapps for 4.2.2 zip
and rebooted my device. Now my tab is running it perfectly.
Procedure is same, Be sure to download the correct zip for the correct model number (mine is p3100) and the gapps for 4.3 (because cm10.2 is running 4.3)
You can browse gapps by below link
http://goo.im/gapps/
Go ahead trozzul
Sent from my GT-P3100 using XDA Premium 4 mobile app
Trozzul said:
soo i have baked bean rom on my tab right now witch is a unoffical cm10.1 i think and i havent updated it in a long time so i think i should switch to cyangenmod. now i looked at cm10.2 on xda first and i noticed jb bootloaders that you would have to flash with odin, i dont know how to do this, for cm 10.1 should i just have to flash the stable zip and gapps??
Click to expand...
Click to collapse
If you're coming from Jellybean, there's no need to flash JB bootloaders prior to flashing CM 10.1 or 10.2.
dynospectrum said:
If you're coming from Jellybean, there's no need to flash JB bootloaders prior to flashing CM 10.1 or 10.2.
Click to expand...
Click to collapse
ok thanks xD just recently I got my hands on a galaxy s cappy and in order to get gingerbread and up roms I had to flash gingerbread bootloaders, if I didn't it would screw up the phone so I thought this was the same way with my tab.
Trozzul said:
ok thanks xD just recently I got my hands on a galaxy s cappy and in order to get gingerbread and up roms I had to flash gingerbread bootloaders, if I didn't it would screw up the phone so I thought this was the same way with my tab.
Click to expand...
Click to collapse
10.1 is JB that is why you don't need to flash the JB Booloader for flashing 10.2 which is also JB.