[Q] Is my GPS broken? - Verizon Samsung Galaxy S III

Got an S3 a week ago, coming from a Nexus. Took it home and rooted and rom'ed it with AOKP M1.
Used the nav for the first time yesterday, and I literally had to have the phone in my left hand within an inch of the window or it would lose GPS.
Tried all the tricks
FasterFix, Faster GPS, GPS Toolbox
Tried this
http://forum.xda-developers.com/showthread.php?t=1880810
I can get a lock if I am outside usually, driving is very challenging to get a lock. Had the same type of issue with my Fascinate and ended up exchanging it before it finally worked.
Will I need to do the same here?
I have not tried it stock, stock sucks.
I have not tried either of these yet, but wondering if it's worth even trying to polish a turd or move on.
http://rootzwiki.com/topic/37182-tutorial-how-to-fix-a-bad-gps-on-galaxy-s3-verizon/
http://forum.xda-developers.com/showthread.php?t=1880411

I remember when I first flashed aokp or aosp I had same problem. I had to go back to stock TW and get gps lock and then flash aokp/aosp. Same thing for nfc. Not sure if that is still the case. Haven't been on aosp for a while now.
Sent from my SCH-I535 using xda premium

Its had lock on the stock image, just never really used it to nav.

having the exact same issue as you, tried most of the fixes/apps from the play store. almost wondering if there is a hardware issue. does anyone know if swapping in a gps.conf from say stock ICS would improve performance in the jellybean vrlblk3 leak?

Back to stock now, and it's not any better.
Stupid thing has to be almost touching the glass or outside of the car to not drop GPS. I am going to call VZ and get a replacement sent out.

a vz rep told me to power down the phone, pull the sim for 30 seconds and try to get a lock again. it worked for my wifes phone but not mine. vz is overnighting my replacement, but try that sim card method though

What I did was take off my case. It is a basic rubber case which I'd love to have, hut it really lags my locking. So once I did...I get like an instant lock now.
Sent from my SCH-I535 using xda premium

I was having GPS problems. I was finding satellites but not locking on and stuck in the "searching for GPS..." mode. I tried everything -- clearing data, the AGPS patch, flashing modems and new ROMS.
SOLVED: Odin stock.vzw_root66.tar. Then, do a full factory reset by typing *2767*3855# into the dialer. This will completely wipe the internal storage, not just /data like in recovery.
From there, your SGS3 is basically as good as new, and you should be able to set the GPS up normally.
Edit: I think the problem has to do with the VRBLK3 bootchain. Keep that in mind when reflashing.

sweeds said:
I was having GPS problems. I was finding satellites but not locking on and stuck in the "searching for GPS..." mode. I tried everything -- clearing data, the AGPS patch, flashing modems and new ROMS.
SOLVED: Odin stock.vzw_root66.tar. Then, do a full factory reset by typing *2767*3855# into the dialer. This will completely wipe the internal storage, not just /data like in recovery.
From there, your SGS3 is basically as good as new, and you should be able to set the GPS up normally.
Edit: I think the problem has to do with the VRBLK3 bootchain. Keep that in mind when reflashing.
Click to expand...
Click to collapse
Completely agree... I did the same about 5 days ago. Have not had a problem yet. I have been testing it multiple times a day. Locking is very good after root 66. I also used triangle away before Odin to reset flash counter.I am afraid to install a custom recovery now. I really agree that it has something to do with the bootchain and custom recovery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SCH-I535 using xda app-developers app

I really do miss KCrapMods... If anyone does this and is brave enough to install a recovery let me know how it works out. I need GPS to bad right now to play around.

sweeds said:
I was having GPS problems. I was finding satellites but not locking on and stuck in the "searching for GPS..." mode. I tried everything -- clearing data, the AGPS patch, flashing modems and new ROMS.
SOLVED: Odin stock.vzw_root66.tar. Then, do a full factory reset by typing *2767*3855# into the dialer. This will completely wipe the internal storage, not just /data like in recovery.
From there, your SGS3 is basically as good as new, and you should be able to set the GPS up normally.
Edit: I think the problem has to do with the VRBLK3 bootchain. Keep that in mind when reflashing.
Click to expand...
Click to collapse
i may try this soon to help confirm it works. i already have a replacement being sent to my house since i had already tried "everything else".
both my wife's and my phones lost GPS about the same time before the JB update. no ROM flashing or and crazy apps were being used. just stopped locking.

For you guys on CM10.1 and I would guess any AOSP based build, this commit http://review.cyanogenmod.org/#/c/29531/ should clear up this issue of GPS working for some and not others. Looks like if you flashed a rom and had GPS turned off at the time, your GPS could get locked in a way that made it not function properly anymore.
Looks like this commit will be in the next nightly, but I made an unofficial CM10.1 build yesterday with it, if you want to give it a try and see what happens.
http://d-h.st/4zP

Got my replacement and locked on right away from inside my building.
Are you saying that if I flash again its going to screw up again?
This thing is so laggy compared to AOKP's 4.1

I got my replacement and flashed a pre rooted Rom, installed recovery with Rom manager, unlocked the bootloader with ez unlock then flashed beans build 8. No GPS problems whatsoever. I get a lock down to 3 meters within 10 seconds
Sent from my SCH-I535 using xda premium

Turn on wifi first before using gps. You'll get a lock on in seconds.
Sent from my SCH-I535 using Tapatalk 2

Turning on Wi-Fi is not gonna help the GPS once you start traveling when Wi-Fi isn't available
Sent from my SCH-I535 using xda premium

The new phone with Beans 8 is locking instantly, this ROM is amazing so far. Thanks for pointing it out.

Simple mechanical GPS fix involving tightening the back frame of the phone
Hi,
I have a simple GPS fix that worked for me. I'd like to mention that the solution may not work for all but it did work for me after I tried just about every fix possible. For example I flashed back to stock, performed numerous battery pulls, used many of the AGPS patches, made numerous edits to the gps.conf file, reprovisioned my phone, checked different ROMs, uninstalled/reinstalled Google Maps, cleared data for Google Maps and Google Service Framework, and so on.
I tried all of the above methods because my GPS would take forever to get a fix both indoors and outdoors (I know it usually takes longer to get a fix indoors), wouldn't hold the fix while navigating and my GPS apps kept stating "Searching for GPS", would see 20+ satellites but would never lock on to them...man it was really frustrating. I just about gave up.
However, as I was trying to follow another procedure to fix my GPS which required me to pull my battery I noticed that when I removed my back cover that the back frame that has all the screws was slightly loose on the left side. Once I tightened them all up my GPS worked immediately! I've tested for a day and I consistently got a lock on the satellites in about 2-15 seconds depending on my location. My navigation also worked and wouldn't cut in and out.
Like I said it may not work for everyone but I would recommend that if you have a GS3 definitely check the back frame of your phone and make sure everything is secure. I've tried my GPS on the stock and CM 10 stable ROMs and I have achieved GPS locks consistently.
I hope this helps. Maybe this has already been shared but I figured I would post in case some of you haven't seen it yet.
Cheers.

Related

Caller ID problem

Does anybody else have a problem with their caller ID? I am on t-mobile in the US and sometimes the phone number shows up, sometimes it says unknown. This happens randomly even the same person. One time, their caller id would show up, the other time it'd say unknown.
I'm on Tmobile USA as well and don't have any of these problems.
Maybe try clearing the contacts and sync them again?
Sent from my HTC VLE_U using XDA
I never had caller ID... Though I remember it was one of the "bonus apps" the icon of which was shaped like a gift box.
Given my repulsion to bloatware, I deleted it. Finally, frustrated with the whole lack of caller ID, I finally dropped $6.99 on White Pages Pro (or something like that). Now my caller ID is great and it adds the info if I want to make a new contact. Very nice.
Sent from my HTC One-S (rooted), stock ROM
Got a new one at costco...Same problem..wtf. Can it be the sim card or something? Any ideas?
So this is what I mean about the unknown caller ID problem. Unknown callers with a phone number is not the problem. The problem is unknown callers calling me with no phone number. And these numbers are not blocked. I asked my friend to help me test it for me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This happens on and off WIFI calling and this is my second One S with the same problem. Kinda annoying because I don't know who to call back if I get a missed call.
I've been having the same problem. I took it back to the t-mobile store and they gave me a new one but after a few days the problem came back. I'm not sure if it's the phone or the sim card.
jmnz said:
I've been having the same problem. I took it back to the t-mobile store and they gave me a new one but after a few days the problem came back. I'm not sure if it's the phone or the sim card.
Click to expand...
Click to collapse
Yes! Thank you! I thought I was alone here. Where are you from? Do you by any chance use an app called screen filter?
Xdpker06 said:
Yes! Thank you! I thought I was alone here. Where are you from? Do you by any chance use an app called screen filter?
Click to expand...
Click to collapse
Yeah I thought I was the only one having this problem. I'm from around the LA area and no I don't have that app.
I also have the same problem. I am in Foxboro, MA. I called Tmobile and they are telling me it's a network issue. Supposed to be resolved in 72 hours. I'll post back with my results.
I seem to be running into the similar issue. I once resolved it by installing the Rooted nandroid available here, it had gone away so I re installed a custom rom but then after a couple weeks it came back? I read thru the forums that's it may have to do with facebook contacts? I'm trying out the new energy rom now, hopefully it clears the problem
mbotelho said:
I also have the same problem. I am in Foxboro, MA. I called Tmobile and they are telling me it's a network issue. Supposed to be resolved in 72 hours. I'll post back with my results.
Click to expand...
Click to collapse
Sweet. I factory reset my one s last night and haven't had this problem today. Don't know whether to attribute it to the reset or t mobile fixing their network. Either way everything's good so far.
Xdpker06 said:
Sweet. I factory reset my one s last night and haven't had this problem today. Don't know whether to attribute it to the reset or t mobile fixing their network. Either way everything's good so far.
Click to expand...
Click to collapse
I tried factory resetting my phone about a week ago but after a few days the problem came back. I'm hoping T-Mobile resolves this problem soon.
Try Factory Reset and also try clearing Cache/Data in the Phone Application Settings if applicable. Obviously, reboot afterwards.
I'm going to assume you are not rooted.
I did a factory reset as well, but still had the problem. I'll try to clear my Phone data/cache first and also try another factory reset today.
I spent an hour on the phone with Tmobile advanced tech support. They think it's a network issue, but haven't figured out exactly what it is yet.
Another thing, when I have Wifi calling on, my caller id works just fine. Really weird.
I did another factory reset today, didn't update any of the apps, basically didn't touch anything and caller id is still not working.
I am also on the latest OTA update. I wonder if that has anything to do with it?
I love this phone, just wish I could tell who is calling me.
So I've discovered a little more from testing this morning. Would be interested to hear if anyone else sees the same thing.
Reboot the phone with Wifi off -> Caller ID works -> Turn on Wifi and Wifi calling ->
Caller ID broken.
Reboot the phone with Wifi off -> Caller ID works -> Turn on Wifi with no Wifi calling -> Caller ID still works.
Looks like the issue might be related to Wifi calling somehow. I'll update Tmobile tech support and hopefully they have some kind of answer.
Ok so after hours of reseting the phone, the settings, wipping everything, re installing the Rom all this over and over, doing nandroid etc... I finally got it to show me the caller ID again.
It was weird because for a while I could get it to show it to me after a new install but then as soon as I'd reboot, It go back to the same thing.
Still confused as far as what is making it hide the caller info. I doubt it's Tmobile network because then I would imagine at least some other phones would have similar issues. then again I don't know because when it started again for me yesterday I was just driving on the road, no settings had been changed (although I had just left my house wifi)
its very confusing
well i am having the same issue. and i have Samsung Galaxy S2. my caller id shows as UNKNOWN
Xdpker06 said:
Yes! Thank you! I thought I was alone here. Where are you from? Do you by any chance use an app called screen filter?
Click to expand...
Click to collapse
Just want to share that I'm having the same issue on my One S. Seems random but have not done any testing to try to figure out a pattern. I'm in southern NH if that makes a difference.
Sent from my cm_tenderloin using xda premium
HeydavidV said:
Just want to share that I'm having the same issue on my One S. Seems random but have not done any testing to try to figure out a pattern. I'm in southern NH if that makes a difference.
Sent from my cm_tenderloin using xda premium
Click to expand...
Click to collapse
Thanks for sharing. I'm in the bay area in CA. I don't want to jinx it, but I haven't had this problem occur in 48 hours. But I have noticed that it occurs more when new numbers call you for the first time so I don't really know because I haven't had anybody new call me.

[HOW TO] Fix GPS Lock issue with Jelly Bean 4.1.2 Update for Motorola Atrix 2

Hello Guys,
I know many people here are wondering that how to fix the GPS issue after upgrading to Jelly Bean 4.1.2 I have been searching for a long time now and last week I found a proper fix for this problem at last
The GPS problems people are facing after upgrading to 4.1.2 JB are :
1. GPS taking a long long time to show my location
2. Maximum time it shows that unable to find my location
3. Even if I use Gps Fix or GPS Fix Delux application, I have to do the fix everytime I turn on my GPS, reboot my phone, if I'm not using GPS more that 1.5 - 2 hours
It's Really Annoying . . . Thats Why I came up with a brilliant solution of this which whill need fix for 1 time only. You will never have to fix your GPS again.
The Steps for One Time fixing the GPS issue:
1. Download this Application from play store : GPS Status - Test & Fix
2. Go under open sky
3. Open the application.
4. If you see that your Latitude and Longitude are not Showing, then your GPS is not working.
5. For that case, 1st tap on the "Reset GPS"
6. Then Tap on the "Get Xtra Data"
7. This will take 5-10 mins of time to completing the fix. But make sure you are under open sky and You are Connected to Internet. To get the Xtra Data, the application will need Internet connection.
8. After a while when you will see that the application is showing your Latitude and Longitude, you will understand that your GPS has been fixed. You will never have to run this app ever again. From now on your GPS will get auto locked to your position.
Enjoy
*** NO ROOT REQUIRED ***
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If this thread helped you, dont forget to hit the thanks button :good:
This 'Xtra data' thing is in "GPS Aids' as well. But it does not stick forever. Are you saying now after using the tool you mentioned, anytime you are outdoors just opening say for example Navigation or Maps you get a direct gps lock within a minute or so without making use of additional gpsfix apps ever?
Can you post your gpsconf file here after you have used this app?
RAD7 said:
This 'Xtra data' thing is in "GPS Aids' as well. But it does not stick forever. Are you saying now after using the tool you mentioned, anytime you are outdoors just opening say for example Navigation or Maps you get a direct gps lock within a minute or so without making use of additional gpsfix apps ever?
Can you post your gpsconf file here after you have used this app?
Click to expand...
Click to collapse
Yes brother it worked for me even if I do reboot my phone or turn on my gps after long time keeping it in off state, it just auto lock my position. Yes sometime tough it takes a little time, but I never have to do gps fix again. Also as you requested I'm attaching my gps.conf file here.
You can get it from here: https://www.sugarsync.com/pf/D1732447_087_30755727
P.S.: It took almost 1 minute and 29 seconds to lock my position.
Sent from my ME865 using Tapatalk 2
isaumya said:
Yes brother it worked for me even if I do reboot my phone or turn on my gps after long time keeping it in off state, it just auto lock my position. Yes sometime tough it takes a little time, but I never have to do gps fix again. Also as you requested I'm attaching my gps.conf file here.
You can get it from here: https://www.sugarsync.com/pf/D1732447_087_30755727
P.S.: It took almost 1 minute and 29 seconds to lock my position.
Sent from my ME865 using Tapatalk 2
Click to expand...
Click to collapse
I used root tweaker and m getting it fixed
Sent from my ME865 using xda premium
Ok I used this tool today and I tested it randomly through the day before I came to commenting and I second your post that indeed this thing has been the best so far of all tools I used for the gps fix. The reason I had asked for your gpsconf file was to see values this tool wrote & yours is the global ntp pool, I have mine manually edited as the India ntp server. On second use it did refuse to lock but thereon the results have been nearly instantaneous :good:
RAD7 said:
Ok I used this tool today and I tested it randomly through the day before I came to commenting and I second your post that indeed this thing has been the best so far of all tools I used for the gps fix. The reason I had asked for your gpsconf file was to see values this tool wrote & yours is the global ntp pool, I have mine manually edited as the India ntp server. On second use it did refuse to lock but thereon the results have been nearly instantaneous :good:
Click to expand...
Click to collapse
Really happy to know that it worked for you brother, sometimes it take 2 minutes to lock the gps. Don't worry just wait it will be automatically locked
Sent from my ME865 using Tapatalk 2
Worked perfectly, bro. Thanks for the solution. I must say JB 4.1.2 absolutely rocks!
Thank you worked for me too! I recently purchased GT-H9500 (S4 clone) I'm pretty sure I checked the gps when I got it a week ago and it worked. I rooted a few days ago and it did not work.
The app took about 15-20 minutes. it was interesting watching it, first it was 0/0 then 0/1 then 0/2 etc, finaly the screen populated with similar data above.
the magnetic field is "not available" for some reason
ozzman77 said:
Worked perfectly, bro. Thanks for the solution. I must say JB 4.1.2 absolutely rocks!
Click to expand...
Click to collapse
I'm really glad to know that it works for you. Please don't forget to give a thanks a reputation.
Sent from my ME865 using Tapatalk 4 Beta
mgh0621 said:
Thank you worked for me too! I recently purchased GT-H9500 (S4 clone) I'm pretty sure I checked the gps when I got it a week ago and it worked. I rooted a few days ago and it did not work.
The app took about 15-20 minutes. it was interesting watching it, first it was 0/0 then 0/1 then 0/2 etc, finaly the screen populated with similar data above.
the magnetic field is "not available" for some reason
Click to expand...
Click to collapse
I'm really glad to know that it works for you. Please don't forget to give a thanks a reputation.
Sent from my ME865 using Tapatalk 4 Beta
Hi,
I have tried "GPS Status - Test & Fix" in my LG Optimus L5 II Dual E455 phone and it didnt fix the issue. I got the phone 2 weeks back and only first time the navigation worked. I think i did an update software for LG the first time and I think it stopped working after that. I had tried the "GPS Status - Test & Fix" several times,also restarted and reset the phone couple of times. it hasnt fixed yet.
Any other suggestions would really help.
Thanks in advance.
An Update:
Now my GPS is working. What i had tried is i went to LG Customer Support and they swaped my Sim 1 and Sim 2 as my Sim 1 was earlier in roaming. Then they enabled my Data Connectivity instead of wifi and were able to get the position in the google maps. But my GPS application "navfree" and "GPS Status-Test & Fix" were still not able to fix the Satellites.
So, i came out disappointed. Then i travelled with my Data Connectivity enabled and used "Google Apps" for navigation for one whole day. Then i tried the "GPS Status - Test & Fix" and few other GPS fix apps and they all started getting the satellite fixed. Now, i disabled and tried the GPS app "navfree" for past few days without Data Connectivity and its working.
So in Summary to have it work :
1. Swapped the Sim's
2. Enabled Data Connectivity in the non-roaming SIM
3. Use Google Navigation for a day with it
4. Run "GPS Status -Test & Fix" in open sky and reset old data and get new GPS Data.
5. GPS satellite got fixed
6. Turned off Data Connectivity
7. Tried NavFree app.
8. working for past few days without issue and without data connectivity.
Hope that helps for other users.Also, thanks to "isaumya" for providing the initial solution.
din_jig said:
Hi,
I have tried "GPS Status - Test & Fix" in my LG Optimus L5 II Dual E455 phone and it didnt fix the issue. I got the phone 2 weeks back and only first time the navigation worked. I think i did an update software for LG the first time and I think it stopped working after that. I had tried the "GPS Status - Test & Fix" several times,also restarted and reset the phone couple of times. it hasnt fixed yet.
Any other suggestions would really help.
Thanks in advance.
Click to expand...
Click to collapse
Interesting I find this post today as I am in roughly the same boat, except I have owned the phone for a couple of months now and was beginning to think it was related to a software update. I may try restoring an earlier version and seeing if that fixes it.
spunkylm said:
Interesting I find this post today as I am in roughly the same boat, except I have owned the phone for a couple of months now and was beginning to think it was related to a software update. I may try restoring an earlier version and seeing if that fixes it.
Click to expand...
Click to collapse
Can only speak for Motorola Atrix 2 & the one & only final fix for the damned gps lock issue is by a user called 'ghittone', that is the only one that works & nothing else, period!!
thanks
Thanks dude.. I works...!!
Hey, the "Get Xtra Data" for me works really fast, not even close to 5-10min you said. How do I know it's working?
:good::good::good:
I didnt work for me
Hi,
I did what you said. after sometime it shows the screen you have shared, however whenever I start that app again or even try to navigate using google map problem remains as it is

[Closed] CM10.1 4.2.2

*****
Please see CM10.1 Nightly thread for CM10.1 builds. They should now work for CDMA fully.
*****
Hey guys,
Yes, this is built off of the razrqcom-dev-team's repo - so the work is based on many, but mainly nadbalak and Skrilax_CZ for the Photon Q.
I am merely rebuilding their source, and trying to make some modifications which will enable CDMA.
Click here for Q&A thread​
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Pre-Requisites
Unlocked bootloader
Custom Recovery (TWRP, CWM, OpenRecovery)
Desire to run CyanogenMod! You do realize your warranty is beyond void now, right?!
For your convenience, there is a changelog post and a buglist post below.
Installation
1. Download the ROM and GAPPS (below)
2. Reboot to your preferred recovery
3. BACKUP YOUR CURRENT SETUP!!
4. Flash CM10.1 - install zip, adb sideload, etc.
5. Flash GAPPS - same process as #4.
6. Factory reset - I do NOT recommend 'dirty' flashing!!!
7. Reboot to CM10.1 and setup.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Want to over/underclock? See this thread.
Without further adieu, here are the downloads:
gapps-jb-20130301-signed.zip Mirror #1 Mirror #2 Mirror #3
cm-10.1-20130509-UNOFFICIAL-xt897c.zip
Archive:
cm-10.1-20130503-UNOFFICIAL-xt897c.zip
cm-10.1-20130501-UNOFFICIAL-xt897c.zip
cm-10.1-20130430-UNOFFICIAL-xt897c.zip
cm-10.1-20130429-UNOFFICIAL-xt897c.zip
cm-10.1-20130428-UNOFFICIAL-xt897c_userdebug_3.zip
cm-10.1-20130428-UNOFFICIAL-xt897c_userdebug_2.zip
cm-10.1-20130428-UNOFFICIAL-xt897c_userdebug.zip
cm-10.1-20130428-UNOFFICIAL-xt897c.zip
cm-10.1-20130427-UNOFFICIAL-xt897.zip
BUGS​
Intermittent USB issues (charging, adb, etc) - seems to be caused by charging via AC. Rebooting it resolves it in the short term, working on a permanent fix.
No camcorder (still images work)
LTE signal bars do not show up correctly (although LTE has been reported working)
Some (not all) seem to experience issues with GPS. If you have issues with GPS, please flash the JB soak (thanks for that great guide thedarkness000) and then flash CM10.1. GPS should work now. (I've also heard you can just flash back to stock, get a lock, then flash CM10.1 again...)
Haptic feedback on soft keyboard is not provided when enabled (which it is by default)
While capturing a picture to send via MMS, ensure HDR is deselected - Gallery will cause a force close if HDR is enabled!! (Note - HDR works for normal still photos, just not MMS.)
Update Google Search (manual update), or else any voice searches will fail with FC. Update the app, and it is resolved.
I just threw this together quickly - but one thing I noticed about CM10.1 (vs. CM10) - service comes up right away, no messing around with data menus etc!!!
Changelog​
cm-10.1-20130509-UNOFFICIAL-xt897c.zip
Sync from CM source
Updates for LTE signal bars...(Pending testing)
cm-10.1-20130503-UNOFFICIAL-xt897c.zip
NFC menu options/hardware enabled
cm-10.1-20130501-UNOFFICIAL-xt897c.zip
MMS FC fix baked in - reverted commit from CM
Upstream fix from razrqcom team for panel
cm-10.1-20130430-UNOFFICIAL-xt897c.zip
MMS works in both directions, but there is a FC occasionally on sending. Need to triage, it's trivial - the message still sends.
In-call Speakerphone fixed (thanks epinter!!)
cm-10.1-20130429-UNOFFICIAL-xt897c.zip
Re-fixed voicemail (sorry!)
MMS overlay - perhaps helped MMS out?
Roaming options!!
cm-10.1-20130428-UNOFFICIAL-xt897c_userdebug_3.zip
Fixed carrier recognition
LTE signal bars maybe fixed?
cm-10.1-20130428-UNOFFICIAL-xt897c_userdebug_2.zip
liblights fixed - keyboard lights and screen brightness should work correctly now
cm-10.1-20130428-UNOFFICIAL-xt897c_userdebug.zip
Changed from eng-->userdebug
BT fixed
No more red bars!
cm-10.1-20130428-UNOFFICIAL-xt897c.zip
eHRPD & hopefully LTE working
Better MMS functionality, probably still needs work for outbound
Alright guys, enjoy! I've only been running this for a little while, but so far so good. I'm really surprised CDMA data hooks up right away - I didn't have to make any changes, it just worked on first boot!!!
Let me know what you find - I haven't really run this through the full gambit yet.
Also, goo.im was really slow for me downloading gapps... so I provided a few mirrors.
Great!!! Does video camera works? I would like to see some feedback before jumping to this. Thank you so much.
Camera works only for photos.
Downloading now will run it through a few things and let everyone know how it goes there are some things I rarely to almost never use such as bluetooth and lte bluetooth I just don't use and lte I don't have in my area
Sent from my XT897 using Tapatalk 2
Skrilax_CZ said:
Camera works only for photos.
Click to expand...
Click to collapse
Seems bug on all Moto Qualcomm. Hopefully,the new 3.4 kernel will fix it.
nwo122383 said:
Downloading now will run it through a few things and let everyone know how it goes there are some things I rarely to almost never use such as bluetooth and lte bluetooth I just don't use and lte I don't have in my area
Sent from my XT897 using Tapatalk 2
Click to expand...
Click to collapse
Thanks..I also don't use bluetooth and lte. But video camera is sometimes needed.
Sent from my XT894 using Tapatalk 2
huatz84 said:
Seems bug on all Moto Qualcomm. Hopefully,the new 3.4 kernel will fix it.
Thanks..I also don't use bluetooth and lte. But video camera is sometimes needed.
Sent from my XT894 using Tapatalk 2
Click to expand...
Click to collapse
I'm going to see if using a 3rd party camera app will allow video recording I bought camera zoom fx a long time ago so ill let ya know
Just backing up some apps with titanium backup already did a nandroid backup so I will be installing this very soon!
Update: so far seems pretty smooth slightly laggy at first guessing cause I had all my app installing automatically and running titanium as well. I do see the red thing around the screen from time to time however its not that big a concern to me (yet) also no go on the camera zoom fx working for videos. When you press record it seems to do something but as soon as you stop it is when it just stops responding, I would guess possibly something with the way it saves the videos is the problem? Maybe. Otherwise it seems pretty nice so far. Data connects very quickly and no changes have to be made whatsoever to the network connection setting and you don't have to dial *#*#4636#*#* either that is a big plus. Great work so far I will update with more info soon I'm going to test out the mms and see if that may be working with this build
Sent from my XT897 using Tapatalk 2
nwo122383 said:
I'm going to see if using a 3rd party camera app will allow video recording I bought camera zoom fx a long time ago so ill let ya know
Just backing up some apps with titanium backup already did a nandroid backup so I will be installing this very soon!
Sent from my XT897 using Tapatalk 2
Click to expand...
Click to collapse
Thanks..It doesn't work on my Atrix HD. Maybe it will be different on Photon Q..
Sent from my XT897 using Tapatalk 2
What would be the difference between CM10 and 10.1, which causes Photon Q not to work with video recording especially on 10.1?
palmwangja said:
What would be the difference between CM10 and 10.1, which causes Photon Q not to work with video recording especially on 10.1?
Click to expand...
Click to collapse
There are a TON of changes in the backend to CM10.1.
As was stated earlier, we probably need kernel 3.4 for cam to work fully.
Thanks for notating this guys, I will put it in the buglist. I thought cam was completely broken, good to know it works for stills at least!!
Camera / camcoder is rewritten in Android 4.2. Most of the "core" issues are shared among the whole platform. So what doesn't work for Razr HD CM10.1 won't work for Photon Q etc.
Is there any lagging issues? Atrix HD has those lagging issues with CM10.1. Good to know data works perfectly. How about mic on speakerphone mode?
Sent from my XT894 using Tapatalk 2
huatz84 said:
Is there any lagging issues? Atrix HD has those lagging issues with CM10.1. Good to know data works perfectly. How about mic on speakerphone mode?
Sent from my XT894 using Tapatalk 2
Click to expand...
Click to collapse
Well, I did notice a bit of lag when I first booted up - but I think that was the Play Store restoring all my apps. After that, it really has been smooth.
I just tested phone calls - mic works with or without speakerphone.
Everyone has their own definition of laggy. Whenever I see those dang red boxes it seems the phone is doing something in the background... if this is "laggy" and unacceptable to you, stick with CM10.
This thing is running pretty smooth.
So far I have not been able to get mms working I tried a few different things such as downloading gosms and then changing the mmsc url to http://mms.sprintpcs.com and left the other to fields empty it seemed to work on and off it would download some and not others I had to revert back to the backup as I am waiting for a phone call so I can't test much more today. Other then mms and video recording things seem pretty good and the lag seemed to clear up after google was done restoring my apps. Oh and that red thing around the border of the screen that comes up once in a while is still there but it seems very random when it comes up so not really a bother thanks for the work on this to everyone involved great job!
Sent from my XT897 using Tapatalk 2
I flashed this over CM10. Should i have done a full wipe first? LTE toggles seem to work now but LTE itself doesnt connect and phone calls crash the phone process although they still go through. High pitch sound still in the earpiece.
It now lets me select 800mhz radio band (to force roam).. before this would crash the phone info app. Even though i can select different radio bands now they dont seem to connect. Roaming indicator will pop up but service never connects. I have toggled to allow roaming in mobile settings.
Edit: Bluetooth is broken and the clock app randomly crashes while performing unrelated operations.
Sent from my XT897 using Tapatalk 2
nwo122383 said:
So far I have not been able to get mms working I tried a few different things such as downloading gosms and then changing the mmsc url to http://mms.sprintpcs.com and left the other to fields empty it seemed to work on and off it would download some and not others I had to revert back to the backup as I am waiting for a phone call so I can't test much more today. Other then mms and video recording things seem pretty good and the lag seemed to clear up after google was done restoring my apps. Oh and that red thing around the border of the screen that comes up once in a while is still there but it seems very random when it comes up so not really a bother thanks for the work on this to everyone involved great job!
Sent from my XT897 using Tapatalk 2
Click to expand...
Click to collapse
Dangit, I always forget about MMS. I use Google Voice, so I always tell people to just send pic mail to my email, because MMS is always such a PITA...
I'll see what I can do, but it is a notoriously annoying piece.
wintrxtrem said:
I flashed this over CM10. Should i have done a full wipe first? LTE toggles seem to work now but LTE itself doesnt connect and phone calls crash the phone process although they still go through. High pitch sound still in the earpiece.
It now lets me select 800mhz radio band (to force roam).. before this would crash the phone info app. Even though i can select different radio bands now they dont seem to connect. Roaming indicator will pop up but service never connects. I have toggled to allow roaming in mobile settings.
Edit: Bluetooth is broken and the clock app randomly crashes while performing unrelated operations.
Sent from my XT897 using Tapatalk 2
Click to expand...
Click to collapse
I've never experienced the high pitch sound you describe in the earpiece - on CM10 or 10.1.
Also, I never do "dirty" flashes, which it sounds like you have done. I never recommend them... Granted this is my first Android device, it just seems like a bad idea to carry all that over - at least wipe cache/dalvik-cache....
Edit - confirmed BT is dead. Looking into it. As for the clock app, I've set a few alarms and mucked with it earlier today - not one FC. I know you said "unrelated actions" - not sure what that means, but please do a factory wipe.
wintrxtrem said:
I flashed this over CM10. Should i have done a full wipe first? LTE toggles seem to work now but LTE itself doesnt connect and phone calls crash the phone process although they still go through. High pitch sound still in the earpiece.
It now lets me select 800mhz radio band (to force roam).. before this would crash the phone info app. Even though i can select different radio bands now they dont seem to connect. Roaming indicator will pop up but service never connects. I have toggled to allow roaming in mobile settings.
Edit: Bluetooth is broken and the clock app randomly crashes while performing unrelated operations.
Sent from my XT897 using Tapatalk 2
Click to expand...
Click to collapse
I tried a dirty flash over CM10 and had the same clock crashing problem. Wiped everything, flashed clean & no problems w/ clock.

[APP][4+] SkipLock Beta - Skip the lock screen (Formerly Unlock With WiFi) 4/17

The app is now live on Google Play.
Thanks to all my beta testers for helping me iron out the wrinkles. I will still post beta versions here when I have new features that need testing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tired of entering your password all the time? SkipLock lets you skip past the lock screen when you're connected to a designated wifi or bluetooth device. When you're at home or in your car, your phone is safe and you don't need to be typing in that damn password all the time. When you're connected to your wifi network, or any bluetooth device, you can go straight to the home screen when you press the power button. You can even have it keep the phone unlocked while you're connected to a bluetooth keychain or headset. As soon as the phone gets out of range, it locks.
This is a public beta. SkipLock is a complete rewrite of Unlock With WiFi. Why rewrite it? This blog post explains the reasoning behind it.
Here are the new features in SkipLock:
Pattern and face unlock supported on rooted devices
Completely redesigned Android 4+ user interface
No background service = less memory usage and more reliable
No status bar icon required (but it’s still an option). Tray-only notifications also an option.
If you have notifications enabled, you can now tap the notification to instantly lock the device
Even more cool stuff coming later
Many of the existing features from Unlock With WiFi will also be in the new app. Some of them are:
Automatically turn off wifi when leaving home
Automatically turn on/off bluetooth
Automatically turn on/off sync
WidgetLocker integration
Lock delay has been removed because Android 4+ supports it natively now
If you have a bug to report, press Bug Report in the app's menu. This will send me some diagnostic information that will help me figure out what's wrong. This is the quickest way to get a response. You may post more general questions in this thread, and I will try to answer them, but bug reports sent directly to me take precedence.
SkipLock requires Android 4.0 or above. Root is required for patterns and face unlock. Only PINs and passwords are supported without root.
SkipLock FAQ
The FAQ is now being maintained on my website.
Crashes on startup on CM 10.2 M1 on HTC One
MajorGaz said:
Crashes on startup on CM 10.2 M1 on HTC One
Click to expand...
Click to collapse
sorry about that! it is the first release of the beta, so please bear with me. can you email me the log file? it's at /sdcard/SkipLock.log. send it to support at benhirashima dot you know what.
Crashes
This seems like a really great and useful app. However I can't seem to access it. Every time I click on the app it just crashes.
Running Droid Bionic with Jelly Bean [4.1.2]
Bionic22 said:
This seems like a really great and useful app. However I can't seem to access it. Every time I click on the app it just crashes.
Running Droid Bionic with Jelly Bean [4.1.2]
Click to expand...
Click to collapse
sorry, corrupted apk file! i just uploaded a new one that works.
Ben74 said:
sorry, corrupted apk file! i just uploaded a new one that works.
Click to expand...
Click to collapse
Seems to work fine on my Nexus 5.
Only tested the WiFi setting though, not bluetooth.
Are there any plans to unlock with NFC too? I should be getting an NFC ring soon and I'd love for it to work with that, so when I grab my phone there's no PIN/password but when others get hold of it it requires a PIN/password.
D3_ said:
Seems to work fine on my Nexus 5.
Only tested the WiFi setting though, not bluetooth.
Are there any plans to unlock with NFC too? I should be getting an NFC ring soon and I'd love for it to work with that, so when I grab my phone there's no PIN/password but when others get hold of it it requires a PIN/password.
Click to expand...
Click to collapse
i would love to do that too, but unfortunately, the NFC reader is not active unless the phone is already awake and unlocked. that goes for most phones anyway. obviously, there are some exceptions, like the moto x.
Ben74 said:
i would love to do that too, but unfortunately, the NFC reader is not active unless the phone is already awake and unlocked. that goes for most phones anyway. obviously, there are some exceptions, like the moto x.
Click to expand...
Click to collapse
True, but there are plenty of custom ROMs and even xposed modules which allow you to enable NFC with the screen off or with the screen on and the phone locked.
Still, if it's not something you're willing to add, there's nothing I can do to change that. The app works great as it is.
D3_ said:
True, but there are plenty of custom ROMs and even xposed modules which allow you to enable NFC with the screen off or with the screen on and the phone locked.
Still, if it's not something you're willing to add, there's nothing I can do to change that. The app works great as it is.
Click to expand...
Click to collapse
hmm, that's interesting. maybe i'll look into it when i get a chance.
Installs now.
Will give it a whack when i get home
It works!
My phone was locked and by adding my WiFi network as an exception, the phone was automatically unlocked.
I'll test it out tomorrow when I leave my house and when I get back to see if it re-locks when i leave my wifi network/unlocks itself upon reaching my wifi network.
Bionic22 said:
My phone was locked and by adding my WiFi network as an exception, the phone was automatically unlocked.
I'll test it out tomorrow when I leave my house and when I get back to see if it re-locks when i leave my wifi network/unlocks itself upon reaching my wifi network.
Click to expand...
Click to collapse
great! thanks for the feedback. try to test it with bluetooth too, if you can.
Also work on my SGS3 Omega v51 4.3
sent from my amazing SGS3 via Tapatalk
Is this time limited?
I don't know how you did it, but this works on stock rooted HTC One with pattern lock! Your previous app and some other apps do not, but this one works perfectly! When does this beta expire?
Take my money!
Side note: does not work on nexus7 with CM 10.2 (4.3) pattern always shows even when skiplock notification says its unlocked. Going to submit report from app
Thanks for this! I have missed this function since using HTC One. And will use this on my Nexus 5 when it arrives too
D3_ said:
True, but there are plenty of custom ROMs and even xposed modules which allow you to enable NFC with the screen off or with the screen on and the phone locked.
Still, if it's not something you're willing to add, there's nothing I can do to change that. The app works great as it is.
Click to expand...
Click to collapse
Yes, the S3 supports nfc from the lockscreen on some ROMs
My Feedback
Thank you for this great little software. You can also achieve this with software like lama or tasker. But I dont need such big toolkits. So your app fits perfectly on my device.
Here are my thoughts:
* starting an app when a network is in reach - great for car-users to start their favorite mp3-player etc.
* simple geofencing to re enable wifi/bluetooth
* turning on/off different system profiles (so you dont have to take care of all settings...it´s all build into the os)
Keep on coding!
working great on note 2 4.3 keep it up bro!
thanks for the feedback, guys. good to hear it's working! for those who asked, yes it's time limited. the current version will expire at the end of november, but if i feel that more testing is necessary, i will update the app and extend the time limit.

Why can't my gear 2 pair with my phone anymore.

Hi all.
I have had my gear 2 for about 1 month now and I am running Hyperdrive RLS 18.1 on my MDK Galaxy S4 phone.
Since getting the watch, i ran Tizen Mod 3.0 with no issues until about a week ago.
I noticed that my bluetooth connection would cut in and out unexpectedly and at random. I started to troubleshoot until I finally got frustrated and just unrooted my watch and return back to stock.
However, I still cannot pair my watch to my phone.
I though maybe xposed framework may be interfering with the pairing process so I deactivated, wiped cache and delvik cache and rebooted.
Started the pairing process again but the phone still says " Failed to Connect to your gear via Gear manager. Refer to Manual for more information."
I have no idea how to get this up and running again and this watch is only 1 month old.
How can i figure out why the bluetooth pairing is not working anymore.
Someone please tell me what am I doing wrong or what the hell is going on with this damn device. I am at my wits end with this.
Just an update. I reflashed my rom in an effort to rectify this situation. Still no go. Someone please help.
I had some similar situation. I ended up resetting my watch and factory default my phone. I think that when the watch goes into pairing mode after deleting the connection, the watch is not always fully reset. I could trick it to connect to a different device which completely wipes the watch and then reconnect to your own phone. The factory default of my phone also must have fixed some bluetooth config corruption.
I restored most of my apps with Titanium Backup after the wipe.
I have my watch connected to a rooted Note3 running Wanam Xposed.
Sent from my SM-N9005 using XDA Free mobile app
I had a feeling I would have no choice but to do a complete wipe on my phone. Very annoying. But thanks sharing your experience. I'm gonna start completely from scratch and report my findings.
RJV3 said:
I had a feeling I would have no choice but to do a complete wipe on my phone. Very annoying. But thanks sharing your experience. I'm gonna start completely from scratch and report my findings.
Click to expand...
Click to collapse
I JUST WIPED MY WHOLE DAMN PHONE AND I STILL CANNOT PAIR MY GEAR 2 TO THE PHONE!!!
Not yelling at you at all, just venting.....
This is definitely a first for me with the pairing issue. I'm going to try on my wifes Note 3 and see if that works.
If all else fails, will try to send this dame thing back to Dell.
Sucks because I already spent money on a stainless steel band for the watch and clear full body skin protector from skinomi.
Four resets and 4 factory resets on the galaxy gear 2 watch, the Damn phone and watch paired! UNBELIEVABLE. I am using the previous build of gear manager and refuse to update. My Problems began with the newer build. Thanks for the reply to the applicable.
Good to hear it worked. I have been messing around with it quite a bit as well.
Are you using TW as default launcher? I use GoLauncher. My Gear doesn't reconnect automatically after a reboot of my phone. I think I noticed that when I use GoLauncher as default, it does not reconnect automatically whereas when I run TW as default, it does. Can't confirm this for sure though.
Sent from my SM-N9005 using XDA Free mobile app
That's very odd. I'm using action launcher pro instead of stock tw launcher. I don't like too many icons all over the place. Also, another user reported the gear manager got updated today and already people complaining it breaks gear 2 connection. I can't verify it though and I won't update until I know any bugs are fixed.
I updated mine and this time no problems. Others reported problems though in another thread. Maybe it was ok because all was freshly installed here recently. I will run some auto connect tests shortly to see if my hunch was right.
Sent from my SM-N9005 using XDA Free mobile app
gschot said:
I updated mine and this time no problems. Others reported problems though in another thread. Maybe it was ok because all was freshly installed here recently. I will run some auto connect tests shortly to see if my hunch was right.
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Running a custom rom?
No, watch is now running stock. My Note3 runs stock 442, rooted, Wanam Xposed.
Sent from my SM-N9005 using XDA Free mobile app
gschot said:
No, watch is now running stock. My Note3 runs stock 442, rooted, Wanam Xposed.
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Okay.
Anyone successful in updating running a TizenMod?
I'm thinking that the new Gear Manager is detecting root on the watches causing it not to connect.
Still reading through the comments section of the 9/17 update and almost everyone has cited connection issues with the new update. Can everyone be wrong?
I am also assuming that most of the comments are from non-rooted users, so they may stuck with the update until Samsung addresses the issue. Very annoying considering what I just went through........
I have a new problem. I tried to download previously purchased apps for the gear 2, and even previously downloaded free apps for the gear 2 and I keep getting (WO:WO:FAILED) error message. I can't get any new watch faces installed.
I know if running Tizen MOd Rom 3.0 i can get some of the apps to install since the dev has signed some of the free apps with his signature in order to work with his rom, but I cannot understand why the apps are failing to install fresh out the box??
Successfully updated and working
Binary100100 said:
Okay.
Anyone successful in updating running a TizenMod?
I'm thinking that the new Gear Manager is detecting root on the watches causing it not to connect.
Click to expand...
Click to collapse
I successfully updated the Gear Manager today and had no problems yet (didn't have much time with it, though). I'm running TizenMod 2.0. The watch didn't reset and connected without a problem to my S4 (latest 4.4.2 stock rom, rooted and with old bootloader).
Gear Manager v2.2.14090599
Antic said:
I successfully updated the Gear Manager today and had no problems yet (didn't have much time with it, though). I'm running TizenMod 2.0. The watch didn't reset and connected without a problem to my S4 (latest 4.4.2 stock rom, rooted and with old bootloader).
Gear Manager v2.2.14090599
Click to expand...
Click to collapse
I have an MDK GS4 here with hyperdrive rls 18.1 rom and was running tizen mod 3 and the 9/5 gear Manager update. Had a lot of connection issues. Then reverted to stock rom on my gear 2 and still had connection issues. Reverted to old gear Manager and connection is fine, but now can't install my downloaded apps / watch faces on my gear 2. Keep getting WO:WO :FAILED. Error message. Anyone know how I can resolve this?
Possible workaround
I have the same connection problem on a stock Note 3 and stock Gear 2.
While I was messing around I might have found a workaround.
Make sure bluetooth is enabled.
Then just open your bluetooth devices (long-press the bluetooth icon in the notifications tray) and you should see Gear 2 is grayed out. Just tap it and it should go blue.
Then go to gear manager and it should be connected. If not reconnect it through gear manager.
I've had to do this a couple times in the last 2 days but it seems to hold it's connection unless I reboot or if it goes into deep sleep.
twelc said:
I have the same connection problem on a stock Note 3 and stock Gear 2.
While I was messing around I might have found a workaround.
Make sure bluetooth is enabled.
Then just open your bluetooth devices (long-press the bluetooth icon in the notifications tray) and you should see Gear 2 is grayed out. Just tap it and it should go blue.
Then go to gear manager and it should be connected. If not reconnect it through gear manager.
I've had to do this a couple times in the last 2 days but it seems to hold it's connection unless I reboot or if it goes into deep sleep.
Click to expand...
Click to collapse
I had noticed this too. Unfortunately, we shouldn't have to do all of that.
Try freezing this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I noticed that it was very recently installed so I froze it, rebooted and everything except SHealth sync seems to work now.
Can someone help me get passed this error message.
RJV3 said:
Can someone help me get passed this error message.
View attachment 2943084
Click to expand...
Click to collapse
Are the issue resolved ? Heard there was a Gear Manager update. I am planning to get a Gear 2 and run custom Rom on it but like to know if these issue is affecting everyone or just some.

Categories

Resources