I am on [ROM][JellyBean][4.2.1]Unofficial CM10.1 - 12/29 - Butter - MTD - OC Kernel, AlI my calls are muffled according to everyone I call. Is there a fix for this or is anyone else having this problem?
Thanks,
Kevin.
Check your imei under settings / about / status
Mine has this sound occasionally. What does the imei have to do with it?
andros11 said:
Check your imei under settings / about / status
Click to expand...
Click to collapse
its a bunch of numbers....
Kevo89 said:
its a bunch of numbers....
Click to expand...
Click to collapse
These are each phone's ID number.
sholsten said:
These are each phone's ID number.
Click to expand...
Click to collapse
Ok but i dont understand how it has to with my calls being muffled...
That is pretty far fetched.
Ok but i dont understand how it has to with my calls being muffled...
Click to expand...
Click to collapse
Your imei is fine so that isn't the problem.
You'll have to see if it is network, hardware or rom related, so maybe try going back to stock and see if it persists.
Then work your way back up to jb
You didn't happen to put the phone in a new case did you?
I did that a while back, bought a new ballistic HC case at the same time I flashed a rom. Phone calls were muffled, turned out the case had a rubber grommet that was blocking the microphones. I removed them and it fixed the problem.
Related
Does this have to do with the leaked ICS radio? If not, how do I fix this because I know this would be really annoying if I heard my own echo.
noise suppression
It could be a bad phone. The first one I got did the same thing on every single call. Everyone I spoke to heard an echo. I had AT&T replace it and the new one works perfect.
How do I disable noise suppression? I don't see it in any settings option
Sent from my SAMSUNG-SGH-I727 using xda premium
Girn said:
How do I disable noise suppression? I don't see it in any settings option
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Settings/call/additional settings
xcrazydx said:
Settings/call/additional settings
Click to expand...
Click to collapse
Its not in there and I'm on sky ics [the real thing]
Sent from my SAMSUNG-SGH-I727 using xda premium
Girn said:
Its not in there and I'm on sky ics [the real thing]
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
That is not an option on ICS, its in the in call menu now. I was referring to GB builds.
there was another user with a similar issue, noise suppression was a problem on pics, and he had to disable it each call. I may actually have a damaged skyrocket, I recommend warranty action
Girn said:
Does this have to do with the leaked ICS radio? If not, how do I fix this because I know this would be really annoying if I heard my own echo.
Click to expand...
Click to collapse
Do you have a case on the phone? If so, take it off and see how it works. On GB, people that had the "echo" problem usually could handle it by disabling "noise suppression", but ICS needs it to be disables on a call by call basis. It is one of the things (along with the "contacts" tab) that I hope the devs can add back into the ICS builds.
I didn't have the "echo" problem with GB, but it is there with ICS when I have a case on the phone. I get around it by using bluetooth most of the time.
scott14719 said:
Do you have a case on the phone? If so, take it off and see how it works. On GB, people that had the "echo" problem usually could handle it by disabling "noise suppression", but ICS needs it to be disables on a call by call basis. It is one of the things (along with the "contacts" tab) that I hope the devs can add back into the ICS builds.
I didn't have the "echo" problem with GB, but it is there with ICS when I have a case on the phone. I get around it by using bluetooth most of the time.
Click to expand...
Click to collapse
Was just here to post this, I discovered the Noise reduction setting but you have to set it from the in call settings menu (as in while you are on the call).
Weird issues
Hey guys, I'm new here and im having some weird things going on, I had that echoing problem so I used odin to go back to stock, now when I'm in a call the mic seems to cut in and out, any ideas?
Mine is being sent back for warranty work.
The echo won't go away no matter what I try.
Sammy didn't even flinch. Just issued a repair ticket. Sucks that I will be without it while they fix/replace it.
Lilbrian15 said:
Hey guys, I'm new here and im having some weird things going on, I had that echoing problem so I used odin to go back to stock, now when I'm in a call the mic seems to cut in and out, any ideas?
Click to expand...
Click to collapse
Same thing here bro, for most people going into settings-call-additional settings then turning off noise suppresion works. To test it do that then call your home or some voice mail and as your speaking run your finger back and forth over the tiny hole by the headphone input (that is the noise canceling mic)
If you can do that and you dont go in and out anymore then you should be good to go. I myself get the same problem and have to send in for repair.
HA HA! I got this problem solved!
I bought a outterbox case for my I9100,
and same time I cought this problem!
I thought that there is a problem with the demultiplexation, changed a lot of modems and kernels...
What a funny pill was to take off the CASE!
The case is very tight and problaly because of that it transports vibration(sound) from speaker to mic! Same moment as I took it of the problem was solved!!!
I can hit cancel and it appears everything including LTE and texting is working fine, but not sure if this is hurting anything? Any idea how to fix this?
trichert said:
I can hit cancel and it appears everything including LTE and texting is working fine, but not sure if this is hurting anything? Any idea how to fix this?
Click to expand...
Click to collapse
Fix it by pressing dismiss everytime it comes up.
tonu42 said:
Fix it by pressing dismiss everytime it comes up.
Click to expand...
Click to collapse
This sound like an incredibly complex workaround. I suggest a YouTube tutorial video series on this operation. At least half a dozen episodes.
tonu42 said:
Fix it by pressing dismiss everytime it comes up.
Click to expand...
Click to collapse
just another reason why XDA is crap...
If you don't have an answer, just don't try to be funny, this is not a humor forum.
SamerBerjawi said:
just another reason why XDA is crap...
If you don't have an answer, just don't try to be funny, this is not a humor forum.
Click to expand...
Click to collapse
That IS the answer!
Same question, just in case. Choosing dismiss is not a real answer.
topmetsfan said:
Same question, just in case. Choosing dismiss is not a real answer.
Click to expand...
Click to collapse
What happens if you chose to dismiss? Any problems?
I had the same issue, never found a solution. Issues with data and voice so I reflashed stock.
It looks like this GUY was continuously having this same issue.
Get the the Phone Info app from the market and change your Network type to LTE/CDMA/Evdo and see if that helps. If not, back up your data and try a fresh flash on CM10 after.
Marcismo55 said:
It looks like this GUY was continuously having this same issue.
Get the the Phone Info app from the market and change your Network type to LTE/CDMA/Evdo and see if that helps. If not, back up your data and try a fresh flash on CM10 after.
Click to expand...
Click to collapse
+1. This will fix your issue.
Marcismo55 said:
It looks like this GUY was continuously having this same issue.
Get the the Phone Info app from the market and change your Network type to LTE/CDMA/Evdo and see if that helps. If not, back up your data and try a fresh flash on CM10 after.
Click to expand...
Click to collapse
For the record that is also the setting Phone Info finds my stock S3 running on.
Hi
I just update my infuse from mind of mac to slim bean 2.4 everything works fine, well the video at 720 drop a lot of frames and look like jump in some cases but the real problem is I can't make calls or receive, I saw signal my provider is there but when I make calls only try to call and then drop, and when I try to call to my infuse this tell me the phone is not in the area... do you know what can be happend and how I can be fix it?
I really appreciate your help
Regards and thanks...
rgor2012 said:
Hi
I just update my infuse from mind of mac to slim bean 2.4 everything works fine, well the video at 720 drop a lot of frames and look like jump in some cases but the real problem is I can't make calls or receive, I saw signal my provider is there but when I make calls only try to call and then drop, and when I try to call to my infuse this tell me the phone is not in the area... do you know what can be happend and how I can be fix it?
I really appreciate your help
Regards and thanks...
Click to expand...
Click to collapse
Go under settings/about phone/ status -check and see if your imei is there..
Sent from my SGH-I997 using Tapatalk 2
mg2195 said:
Go under settings/about phone/ status -check and see if your imei is there..
Sent from my SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
Nope, just weird caracters apears:
.X~
".X~
"?
Do a search for missing imei number.
Planning my escape!
Go back to stock in order to get it back, back it up and flash jb again. If you happen to lose it again, restore your backup.
Sent from my sweet & buttery Infuse
Hey guys, I have recently switched over to Wind Mobile a couple weeks ago, and I have been experiencing difficulties making phone calls over the network. I have no difficulty picking up a signal, and I am able to receive and send text messages, and use the data network successfully using my cellphone.
My problem is this:
I am able to dial and answer a phone call, and I can hear the other person on the line crystal clear. However, on their end, my voice is garbled and you cannot hear what I am saying at all. The phone call sounds like it's underwater.
This cannot be a hardware issue, as I have succesfully tested the voice input of my phone using a voice recording application, and was successful.
These are the specs of my SR:
ROM: CvR Nibbles 1.6
Kernel: 3.0.49-Nibbles-v0.1.3
Baseband: T989UVLI4
The radio I am using is picking great signals from Wind, consistently getting around 3-4 bars. I am able to access their mobile network flawlessly.
Any reason why this may be? This problem persists regardless of my location, or my signal at the time of the call.
Thanks in advance.
Try a different rom and see if you have the same problem
Sent from the short bus
If your are using a call recorder turn it off to and check your noise suppression settings.
I didn't choose the Droid life, The Droid life choose me..
mr_magoo said:
If your are using a call recorder turn it off to and check your noise suppression settings.
Click to expand...
Click to collapse
Not using a call recorder, and my noise suppression setting is off; should I try turning it on?
jd1639 said:
Try a different rom and see if you have the same problem
Click to expand...
Click to collapse
Trying a different rom would be my last resort, but I'll definitely try if nothing else works
Thanks for the replies guys!
EvmL said:
Trying a different rom would be my last resort, but I'll definitely try if nothing else works
Click to expand...
Click to collapse
here, on xda, its our first resort
vincom said:
here, on xda, its our first resort
Click to expand...
Click to collapse
I'll be sure to give another ROM a shot later this week, when I free up. Thanks for the input so far guys, I'll be back shortly with an update. :good:
EvmL said:
I'll be sure to give another ROM a shot later this week, when I free up. Thanks for the input so far guys, I'll be back shortly with an update. :good:
Click to expand...
Click to collapse
Update here, even after flashing some new ROMs, issue still persists. Any other suggestions? Could it be the radio on my phone?
Working on this myself...
Thought I was being so nice, giving my niece a skyrocket...
They are on Wind, we are visiting them in calgary.
The garbled sound problem looks entirely unsolved according to my hunting, and trying many radios.
Has anyone gotten past this?
Now using CM10, Tried tons of T989 radios, the ones that DO connect, the outgoing call sound is just a garbled mess.
phuzzyday
---------- Post added at 04:10 PM ---------- Previous post was at 03:48 PM ----------
The weird solution is... Turn ON noise suppression in the settings in the phone app!!
(Noise suppression was mentioned above, or I would have never known.)
UGLH2, UVLH1, Both of these worked, but probably a universal thing.
You guys ALL ROCK.
phuzzyday
I recently got a new (refurb) GSIII from best buy because my old one turned into a paperweight (randomly from what I told them...I certainly didn't do anything to it! What's a rom? ). Since I got it the vibrate hasn't been working. I don't really care enough about it to swap it for a new one but I recently installed Slim 4.3 b2 on it and noticed that under Advanced options > Device > Haptic the vibration strength is greyed out.
GPS seems to be borked on every rom I try as well...could be something with the PCB or other internals. I may end up swapping it back out.
Does anyone have any experience playing with the vibration unit in these? I'm comfortable cracking it open if it might be something easy but off the top of my head I'm not sure what I'm looking for.
Thanks in advance for any help!
Relentless D said:
I recently got a new (refurb) GSIII from best buy because my old one turned into a paperweight (randomly from what I told them...I certainly didn't do anything to it! What's a rom? ). Since I got it the vibrate hasn't been working. I don't really care enough about it to swap it for a new one but I recently installed Slim 4.3 b2 on it and noticed that under Advanced options > Device > Haptic the vibration strength is greyed out.
Click to expand...
Click to collapse
I think it's greyed out by default cuz my vibrate is fine however that same Haptic setting is greyed out for me on beta 2.
GPS seems to be borked on every rom I try as well...could be something with the PCB or other internals. I may end up swapping it back out.
Click to expand...
Click to collapse
This happen only on 4.3 roms or TW too? Tried tightening the screws on the back of the device? How about resetting the AGPS using an app like GPS Test or GPS Status?
Does anyone have any experience playing with the vibration unit in these? I'm comfortable cracking it open if it might be something easy but off the top of my head I'm not sure what I'm looking for.
Thanks in advance for any help!
Click to expand...
Click to collapse
No personal experience but maybe looking at an ifixit teardown will reveal the location of the vibration motor.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
This happen only on 4.3 roms or TW too? Tried tightening the screws on the back of the device? How about resetting the AGPS using an app like GPS Test or GPS Status?
Click to expand...
Click to collapse
I should have clarified, I have tightened all the screws and tried resetting AGPS. I have NOT reset back to TW. That's a derp worthy fail on my part. I'll give that a shot.
SlimSnoopOS said:
No personal experience but maybe looking at an ifixit teardown will reveal the location of the vibration motor.
Click to expand...
Click to collapse
Forgot about iFixit. I'll check them out in a bit.
Thanks for the suggestions!
Stock rom worked like a champ and I had been running BMS since I switched to 4.3. Reflashed slim with the stock kernel and the GPS worked like a champ.
Vibrate is still a no go but I'll live with it
Relentless D said:
Stock rom worked like a champ and I had been running BMS since I switched to 4.3. Reflashed slim with the stock kernel and the GPS worked like a champ.
Vibrate is still a no go but I'll live with it
Click to expand...
Click to collapse
Hmm, good stuff! Do you think BMS was the reason your GPS was failing?
SlimSnoopOS said:
Hmm, good stuff! Do you think BMS was the reason your GPS was failing?
Click to expand...
Click to collapse
That's the best I can think of. I don't know why else it wasn't working and now it is. It would also explain why I had the issue on slim and CM before that. That being said, it may just be the combo of my phone and that kernel because as far as I know GPS isn't borked for everyone using BMS.
Relentless D said:
That's the best I can think of. I don't know why else it wasn't working and now it is. It would also explain why I had the issue on slim and CM before that. That being said, it may just be the combo of my phone and that kernel because as far as I know GPS isn't borked for everyone using BMS.
Click to expand...
Click to collapse
Fair enough. I noticed GPS issues as well, actually posted it on BMS thread. Oddly enough, reflashing the gapps resolved my GPS issues which kinda surprised me. Maybe try that if you do decide to run BMS again. All's well that ends well, glad you have almost everything resolved!