[Q] Bricked phone when flashing clockworkmod via Odin - Samsung Galaxy SL i9003

deleted

can't go to recovery or download mode?! it's hard brick

So any suggestions?
Sent from my Galaxy Wonder

Have a look at this..
http://forum.xda-developers.com/showthread.php?t=1133787
Sent from my fingers to your face..!

Sry, is not I don't have firmware cause I'm a galaxy w user too~ but when I flash sl with Odin it will fail and stuck at bootimg
Sent from my Galaxy Wonder

ipromeh said:
Sry, is not I don't have firmware cause I'm a galaxy w user too~ but when I flash sl with Odin it will fail and stuck at bootimg
Sent from my Galaxy Wonder
Click to expand...
Click to collapse
what is your odin version?

Make sure you have Odin 1.83 or 1.85 , As latest releases are unstable.
You can try an USB jig to get into download mode!

You sure you cant enter download mode? Trying holding first volume down, then hold the home, lastly the power button. Some users are having a hard time going to download mode..

Make sure you're NOT using odin 4.4x + ancora.ops
This is Galaxy SL. Use Odin 1.8x no .ops file, just flash a rooted kernel on PDA and its done.
Sent by my Galaxy $

amifiq said:
Make sure you're NOT using odin 4.4x + ancora.ops
This is Galaxy SL. Use Odin 1.8x no .ops file, just flash a rooted kernel on PDA and its done.
Sent by my Galaxy $
Click to expand...
Click to collapse
thanks all i have sucessfully flash my dad's sl using another computer

As you said you cant enter either download or recovery mode, first you enter the download mode as follows:
Press the hard reset button which is a small hole between camera and phone speaker. You need two people to do this. Tell someone to press the hard reset button with help of a pin or needle and simultaneously you press the download mode combination (volume down + home + power)
This should definitely work for you.
Then flash with proper i9003 files via odin v1.83
Good Luck
Sent from my GT-I9003 using xda app-developers app

Related

Not detected phone by odin 4.38

Hello I have a problem. I download clockworkmod my galaxy ace s5830i after that phone is not open when ı push the power buton galaxy ace screen is open but it is not pass this screen I tried recovery but ı had problems after that I decided to flash with odin a stuck rom. My problem is odin3 1,85 is detected my phone but I cant flash my phone this odin. On the other hand I use odin 1,38 but this version is not detected my phone pleease helpp
Wrong forum buddy.
Sent from my SCH-I510 using xda premium

[Q] Samsung galaxy Gio S5660 Will Not Enter Recovery

Hi all,
I am trying to put cyanogenmod 9 on my Samsung Galaxy Gio. Following these instructions found here
Download: px-CWM-v2.zip
Place it on root of your sdcard
reboot to recovery mode
install this cwm from recovery
results in me not being able to boot into recovery (after following the above instructions). The phone said that the installation was successful.
When I try to boot into recovery all I get is a black screen with the Samsung logo on it. If I try to turn it off it just goes into a boot loop. So I am unable to continue with the next part of the installation process.
If I remove the battery and put it back in then power on normally, the phone boots and runs normally.
Current OS: Froyo 2.2.1 XXKB9 (Baseband XKB8).
Model: GT-S5660
Rooted: Yes (used SuperOneClick).
Can anyone tell me what has happened and how I can fix it?
Thanks for your time.
Best Regards
Bidski
Just an update.
I can still get into download mode (hold vol -, home, and power button simultaneously until yellow "downloading..." appears on screen) and I can also get into emergengy downloand mode (hold vol -, vol +, home, and power button simultaneously until sansumg logo and "Emergency Dload" appear on the screen).
But I still cannot access recovery mode (hold home and power simultaneously).
Using Odin (version 4.42 I believe) and the download mode I can re-flash the original stock ROM and this allows recovery mode to work again as normal. However, attempting the steps that I mentioned in my first post lead to the same result.
Does anyone have any ideas?
Best Regards
Bidski
Hello
If you can enter into download mode you can update your firmware to 2.3.6 and root again. This will help. sammobile.com <-- here u can find firmware to yours phone.
shushi15 said:
Hello
If you can enter into download mode you can update your firmware to 2.3.6 and root again. This will help. sammobile.com <-- here u can find firmware to yours phone.
Click to expand...
Click to collapse
I can only firmware version 2.3.4 for my phone in my region. Will this still be helpful to me?
Best Regards
Bidski
OK, I have gingerbread flashed on to my galaxy gio. All seems good and I managed to get recovery flashed and have done a backup. Recovery seems to work fine too. I used a different version of recovery that I found on this site that says it worked for rfs and ext4 partitions (trying to find this post again ).
My question now is do I need to flash an ext4 converter before I flash cm9?
Best Regards
Bidski
Bidski said:
I used a different version of recovery that I found on this site that says it worked for rfs and ext4 partitions (trying to find this post again ).
Click to expand...
Click to collapse
Got recovery from this post.
I also downloaded the ext4 formatter from that post, but have not used it yet as I am not sure I need to or not.
Best Regards
Bidski
[SOLVED] Samsung galaxy gio S5660 Will Not Enter Recovery
All is sloved. Thanks for the help everyone.
Best Regards
Bidski
Bro can I know how did you re-flash the original stock ROM using odin 4.42? As I'm facing the same issue here. installed cyanogenmod 9 and can't boot into recovery mode now.
nghoongen said:
Bro can I know how did you re-flash the original stock ROM using odin 4.42? As I'm facing the same issue here. installed cyanogenmod 9 and can't boot into recovery mode now.
Click to expand...
Click to collapse
Download original stock rom from http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-S5660&r=4#regiona
Boot into download mode (hold vol -, home, and power button simultaneously until yellow "downloading..." appears on screen).
Connect Odin, load the original stock ROM into Odin and flash.
Odin should reboot your phone once it has finished its business.
Good luck.
Best Regards
Bidski
I used samsung kies to recovery it back turned out my phone can't be on now. Odin can't detect my phone too.
I suggest to flash an Original Firmware, ROOT it, Have CWM (Clockwork Mod) installed and proceed with your custom ROM installation
Sent from My Premium Calculator HD

[Q] Bricked Galaxy y Duos

Hey,
I have Samsung Galaxy Y Duos and i installed GingerIceJelly V2 on it. But after flashing it got stuck in the Samsung Galaxy y duos logo.
I can not boot into the ROM/recovery/download because it's stuck on the logo. So my question is, how can i save my phone?
I asked the same question in "Bricked your phone?" thread but it seems that no one knew the solution...
LocDog39 said:
Hey,
I have Samsung Galaxy Y Duos and i installed GingerIceJelly V2 on it. But after flashing it got stuck in the Samsung Galaxy y duos logo.
I can not boot into the ROM/recovery/download because it's stuck on the logo. So my question is, how can i save my phone?
I asked the same question in "Bricked your phone?" thread but it seems that no one knew the solution...
Click to expand...
Click to collapse
you can't do anything about it :crying:, just take it to the shop from where you bought it and tell them it's not working and wish they replace your phone and don't tell them that you have flashed a rom.
Okay thanks
Hey
I got that brick working again.. Just had to go to SD, remove the "_old" from "Boot_old.img" and then i could boot into recovery and download after which i used Odin and now everything is ok.
LocDog39 said:
Hey
I got that brick working again.. Just had to go to SD, remove the "_old" from "Boot_old.img" and then i could boot into recovery and download after which i used Odin and now everything is ok.
Click to expand...
Click to collapse
how do you did it coz i have the same problem i flashed gingericejelly and it is stuck in the logo .....how do you use odin??? plzzzzzzz
help coz i want to make it wor again
groundead said:
how do you did it coz i have the same problem i flashed gingericejelly and it is stuck in the logo .....how do you use odin??? plzzzzzzz
help coz i want to make it wor again
Click to expand...
Click to collapse
http://androidlegend.com/update-samsung-galaxy-y-duos-s6102-with-gingerbread-2-3-6-ddld4/ follow this link
groundead said:
how do you did it coz i have the same problem i flashed gingericejelly and it is stuck in the logo .....how do you use odin??? plzzzzzzz
help coz i want to make it wor again
Click to expand...
Click to collapse
Using odin is not complex .. Its simple ..But you have to take attention... Anytng wrong can make your phone a priceless paperweight.
Requirements
1. PC with windows os.
2. Installed samsung usb driver.
3. Odin for your phone.
3. Odin flashable stock firmware.
Steps
1. Get your phone into odin mode by pressing vol down+power+home keys simultaneously. Then a menu will come. Press vol up to get into odin mode..
2.connect your phone to ur pc by usb..
3.unzip odin and run odin.
4.In odin if there is a colour change (yellow or blue) in left top end (it will be written "com:xx" inside colourd box) your device is ready for flashing.
5.ensure that there is no tick on partition.
6.now unzip stock rom. Possible u will have only one file. Click on PDA and select that file. Now press start.
7. Dont do anything .. Wait patiently . Dont plugg out your phone from usb untill "pass" will come on the top left end.
By these steps ..you can work on odin...
Sent from my GT-S6102 using xda app-developers app
rahulsnair said:
Using odin is not complex .. Its simple ..But you have to take attention... Anytng wrong can make your phone a priceless paperweight.
Requirements
1. PC with windows os.
2. Installed samsung usb driver.
3. Odin for your phone.
3. Odin flashable stock firmware.
Steps
1. Get your phone into odin mode by pressing vol down+power+home keys simultaneously. Then a menu will come. Press vol up to get into odin mode..
2.connect your phone to ur pc by usb..
3.unzip odin and run odin.
4.In odin if there is a colour change (yellow or blue) in left top end (it will be written "com:xx" inside colourd box) your device is ready for flashing.
5.ensure that there is no tick on partition.
6.now unzip stock rom. Possible u will have only one file. Click on PDA and select that file. Now press start.
7. Dont do anything .. Wait patiently . Dont plugg out your phone from usb untill "pass" will come on the top left end.
By these steps ..you can work on odin...
Sent from my GT-S6102 using xda app-developers app
Click to expand...
Click to collapse
Tried and works! THANKS MAN!
my galaxy y duos is dead, it was not rebooting and goes only to downloading mode. i try flash with the custom rom but still it doesnt booting .
plzz help me
rahulsnair said:
Using odin is not complex .. Its simple ..But you have to take attention... Anytng wrong can make your phone a priceless paperweight.
Requirements
1. PC with windows os.
2. Installed samsung usb driver.
3. Odin for your phone.
3. Odin flashable stock firmware.
Steps
1. Get your phone into odin mode by pressing vol down+power+home keys simultaneously. Then a menu will come. Press vol up to get into odin mode..
2.connect your phone to ur pc by usb..
3.unzip odin and run odin.
4.In odin if there is a colour change (yellow or blue) in left top end (it will be written "com:xx" inside colourd box) your device is ready for flashing.
5.ensure that there is no tick on partition.
6.now unzip stock rom. Possible u will have only one file. Click on PDA and select that file. Now press start.
7. Dont do anything .. Wait patiently . Dont plugg out your phone from usb untill "pass" will come on the top left end.
By these steps ..you can work on odin...
Sent from my GT-S6102 using xda app-developers app
Click to expand...
Click to collapse
i tried these thing that you say ..but my samsung galaxy y duos is still stuck at logo ...in recovery mode
" --appling Muti-csc --
E : failed to mount /system (invalid argument)
E : failed to mount /system (invalid argument ) " is written ..what can i do ..please tell me ..
my phone is stuck (boot LOGO) , after flasing !
hey ,,
can anyone sort this out for me ..please !
tried flashing new rom Boyzz v2.0(http://forum.xda-developers.com/showthread.php?t=2507406) via CMW recovery.., tried flasinh the same rom twice , will it work if flash my stock rom ???
tried clearing everything on my SD card , formatted n tried flashing it again .
n when i charge after switching off ..a circle comes inside that battery logo instead of that green stuff .
i can boot into recovery mode after i remove the battery and reinsert it again .
w

[HELP] my phone open only in download mode, connot open CWM.

plsss help me! (galaxy ace plus gt-s7500) my phone is running CM10.1.2 by the whisp and i'm using it for almost a month. Suddenly my phone reboot and stuck on boot(CM logo). I've waited for 5 minutes and still on boot so i pull out the battery. When i open my phone, it boot in download mode with this messge:
[ODIN3]
PRODUCT: GT-S7500
VERSION: 57500XXLH3
CUSTOM BINARY DOWNLOAD: YES (12 counts)
CURRENT BINARY: CUSTOM
DOWNLOADING......
Do not turn off target!!
i try to open reboot in recovery but intead of CWM it go to download.
i cant flash stock rom in odin because in download mode cannot go further, odin cant detect my phone. it just stuck in that message.
plss i need help to fix this.:crying:
flash stock rom through ODIN or
if you have nandroid backup then restore boot​
ANDROID-000 said:
plsss help me! (galaxy ace plus gt-s7500) my phone is running CM10.1.2 by the whisp and i'm using it for almost a month. Suddenly my phone reboot and stuck on boot(CM logo). I've waited for 5 minutes and still on boot so i pull out the battery. When i open my phone, it boot in download mode with this messge:
[ODIN3]
PRODUCT: GT-S7500
VERSION: 57500XXLH3
CUSTOM BINARY DOWNLOAD: YES (12 counts)
CURRENT BINARY: CUSTOM
DOWNLOADING......
Do not turn off target!!
i try to open reboot in recovery but intead of CWM it go to download.
i cant flash stock rom in odin because in download mode cannot go further, it just stuck in that message.
plss i need help to fix this.:crying:
Click to expand...
Click to collapse
why couldn't you flash stock rom? in download mode it should work
ANDROID-000 said:
plsss help me! (galaxy ace plus gt-s7500) my phone is running CM10.1.2 by the whisp and i'm using it for almost a month. Suddenly my phone reboot and stuck on boot(CM logo). I've waited for 5 minutes and still on boot so i pull out the battery. When i open my phone, it boot in download mode with this messge:
[ODIN3]
PRODUCT: GT-S7500
VERSION: 57500XXLH3
CUSTOM BINARY DOWNLOAD: YES (12 counts)
CURRENT BINARY: CUSTOM
DOWNLOADING......
Do not turn off target!!
i try to open reboot in recovery but intead of CWM it go to download.
i cant flash stock rom in odin because in download mode cannot go further, it just stuck in that message.
plss i need help to fix this.:crying:
Click to expand...
Click to collapse
See screen shot. It is in download mode. I open odin and connect my phone nothing happen. I was stuck on what is in the picture.
Sent from my GT-S5300 using xda app-developers app
j.posarekar70 said:
flash stock rom through ODIN or
if you have nandroid backup then restore boot​
Click to expand...
Click to collapse
I cant boot to CWM, even pressing vol. up+vol. down+home+power still it go to download mode, and in download mode i think its not working also because when you open odin and connect your phone it will detect right? Mine was not detecting, i was stuck in that downloading message. I have nandroid backup but i cant restore since i cant boot to CWM.
Sent from my GT-S5300 using xda app-developers app
I dont know if this is hard brick i never in countered like this before. It is easy to fix if odin can detect my phone but since not this is so tough for me so i need an advice or help from you guys.
ANDROID-000 said:
I dont know if this is hard brick i never in countered like this before. It is easy to fix if odin can detect my phone but since not this is so tough for me so i need an advice or help from you guys.
Click to expand...
Click to collapse
It's not a hard brick yet.
The " Downloading... " message won't change and that's normal, Odin leftmost white bar will turn yellow if it detect your phone, otherwise, you will need to install your phone's USB Cable Drivers.
Check this for more:
http://forum.xda-developers.com/showthread.php?t=2316280
Bassel Bakr said:
It's not a hard brick yet.
The "Downloading..." message won't change and that's normal, Odin leftmost white bar will turn yellow if it detect your phone, otherwise, you will need to install your phone's USB Cable Drivers.
Check this for more:
http://forum.xda-developers.com/showthread.php?t=2316280
Click to expand...
Click to collapse
Oh thanks god thats a relief hearing this from you. I will try this tomorrow, hope this will work. Thanks! How to install usb cable driver? If i did will odin can detect my phone?
I guess that if you install Kies on your PC then you are sure you have USB drivers installed.
Sent from my GT-S7500 using xda app-developers app
ANDROID-000 said:
Oh thanks god thats a relief hearing this from you. I will try this tomorrow, hope this will work. Thanks! How to install usb cable driver? If i did will odin can detect my phone?
Click to expand...
Click to collapse
Yes donwload USB drivers by samsung kies
and should odin reads it and reflash stock rom hope it works
khaledreno said:
Yes donwload USB drivers by samsung kies
and should odin reads it and reflash stock rom hope it works
Click to expand...
Click to collapse
I will try this method, hope this work. Thanks to all of you guys realy:thumbup:
You should try wiping data and cache by going into recovery mode. If ur phone still stuck on boot logo then u have to flash Stock rom using odin. For this. You must have ur phones drivers installed in your Computer.
Download Samsung drivers from here : http://forum.xda-developers.com/showthread.php?t=961956
read the instructions and install.
After that download your phone's stock firmware: http://www.tsar3000.com/Joomla/inde...ace-plus-firmwares&catid=55:samsung&Itemid=82
You can get from the above link.
There is a full guide how to install stock firmware: http://forum.xda-developers.com/showthread.php?t=2065046
I hope this would help!!
mrtaim3 said:
You should try wiping data and cache by going into recovery mode. If ur phone still stuck on boot logo then u have to flash Stock rom using odin. For this. You must have ur phones drivers installed in your Computer.
Download Samsung drivers from here : http://forum.xda-developers.com/showthread.php?t=961956
read the instructions and install.
After that download your phone's stock firmware: http://www.tsar3000.com/Joomla/inde...ace-plus-firmwares&catid=55:samsung&Itemid=82
You can get from the above link.
There is a full guide how to install stock firmware: http://forum.xda-developers.com/showthread.php?t=2065046
I hope this would help!!
Click to expand...
Click to collapse
Thanks, i'm on tough situation right now.
mrtaim3 said:
You should try wiping data and cache by going into recovery mode. If ur phone still stuck on boot logo then u have to flash Stock rom using odin. For this. You must have ur phones drivers installed in your Computer.
Download Samsung drivers from here : http://forum.xda-developers.com/showthread.php?t=961956
read the instructions and install.
After that download your phone's stock firmware: http://www.tsar3000.com/Joomla/inde...ace-plus-firmwares&catid=55:samsung&Itemid=82
You can get from the above link.
There is a full guide how to install stock firmware: http://forum.xda-developers.com/showthread.php?t=2065046
I hope this would help!!
Click to expand...
Click to collapse
still cant fix my phone, i install samsung kies and the usb driver was installed also after kies. i open kies but when i connect my phone to usb cable(original samsung cable) my phone open in download mode like the screenshot in the first post. this always happen when i plug phone to pc. even boot to CWM button won't work, it always go to download mode. everytime the phone open, it always go to download mode. i open odin and plug my phone still it cannot detect, even with kies intalled in pc and usb drive as well. it was stuck always in download mode.:crying:
OOOOOOOHHHHHHHHHHHH THANKS GOD!!!!!! and to all of you guys!!!!!!! I'm alive finaly after so many times pluging my phone to pc ODIN detected my phone and finaly i'm on stock firmware. woooooooooOOOOOOHHHHH! crying! (tears of joy)
Thanks to:
j.posarekar70
ShadowsDie
Bassel Bakr
GriloVirante
khaledreno
mrtaim3
kk9999gada
for the links and for all the advice.
The best ace plus community!!!!!:good::laugh::laugh::laugh::laugh::laugh:
congratulation!you are so lucky
Sent from my GT-S7500 using xda app-developers app
coolfzk said:
congratulation!you are so lucky
Sent from my GT-S7500 using xda app-developers app
Click to expand...
Click to collapse
Thanks to those people.

[Completed] How to flash a stock ROM using Odin?

I have a Samsung galaxy ace GT-S5830
I tried to install a custom ROM and messed up, and now I cannot access recovery mode but can access download mode. So I tried to flash the stock ROM using Odin but when I connected the phone to the computer, an error comes up saying "USB device not recognized". I have tried numerous drivers without getting results, I tried on different computers, I tried using different USB cables, but no results.
Please does anyone know of a way to fix this ? thanks in advance
Hi there,
Please take a look at this solved thread: rescue / recover bricked samsung galaxy ace s5830
For questions you can do it there but first you must register an account on XDA. Also for any other questions related to your device please post here:
[S5830 + B/D/L/T ONLY] A Newbie Guide for your Galaxy Ace
Official instructions for flashing stock firmware with Odin here:
Instructions
 Extract (unzip) the firmware file
 Download Odin v3.09
 Extract Odin ZIP file
 Open Odin v.3.09
 Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
 Connect phone and wait until you get a blue sign in Odin
 Add the firmware file to AP / PDA
 Make sure re-partition is NOT ticked
 Click the start button, sit back and wait few minutes
Click to expand...
Click to collapse
Good luck
What you suggested didn't work. But thanks anyway.
I have submitted my issue to the forum you have mentioned.
Thanks for the speedy reply

Categories

Resources