[Q] Blank Screen on LG P920 when connected to Computer - LG Optimus 3D

Hi all,
I'm new to andriod world.
I have got a LG Optimus p920 phone and with the help of xda forums i have rooted the device and installed a stable build from cyanogenmode. After using the device for four days my mobile phone was not displaying the Caller id when my phone rings.
Finally i decided to format the phone and in clock recovery mode i saw format options in Advanced Section and i have formatted data,cache,sdcard and external sdcard from it.
Problem : Now when i connect my device i can see only blank screen and unable to get the clock recovery mode.
how do i re-install again.
Please help..!!
Thanks,
Siddik

Found the way...!!
Press volume down+3d button and Power button. When LG logo appears you can leave the button and it will go to clock recovery mode..
Thanks again to xda..!!

Related

Stuck on LG Logo after flashing a corrupted ROM file

Hi.
So I was flashing a ROM using CWR but it looks like the Zip file was corrupted. So after I selected the zip file, the phone restarted and now is stuck on LG Logo.
Anyway to resurrect the phone from dead?
Any help will be greatly appreciated.
Try power button+vol down+3d button if you can get the recovery....
Claudio67 said:
Try power button+vol down+3d button if you can get the recovery....
Click to expand...
Click to collapse
Thanks for the reply.
When I hold those three buttons the phone started, shows LG Logo for a few second then turns off.
I tried LG Mobile Update tool as well, after I type my Serial and IMEI, it says "Starts downloading data..." then immidately shows a "There a fatal error with LG Update tool, please contact your adminisitrator"
Farhang said:
Thanks for the reply.
When I hold those three buttons the phone started, shows LG Logo for a few second then turns off.
I tried LG Mobile Update tool as well, after I type my Serial and IMEI, it says "Starts downloading data..." then immidately shows a "There a fatal error with LG Update tool, please contact your adminisitrator"
Click to expand...
Click to collapse
When you see the logo release only the power button immediatly after 5-6 second the recovery should appear...
If you will not able to get the recovery look here:
http://forum.xda-developers.com/showthread.php?t=1186406
I had the same problem and:
1) Start LG Mobile update
2) Power off your phone without USB cable
3) Connect the USB cable and wait for the LG logo and the annimation battery
4) Pressing Vol.up + power 6-7 seconde wait for the LG logo and The screen turns off
5) Again pressing Vol.up + power 6-7 seconde and wait until the drivers are installed (LG Mobile update detects your phone and the screen is always off)
Here I was lucky because lgupdater detected my phone and then said that an update was needed. Applied and then everything went fine.
PS sorry for my english...
Claudio67 said:
When you see the logo release only the power button immediatly after 5-6 second the recovery should appear...
Click to expand...
Click to collapse
Oh my God!
I really love you! I went to recovery and thank God I had the KingDroid 3D Rom on my memory card. so I did a full wipe and flashed it and now the phone is back and good again.
THANKS A LOT!!! I really appreciate it.
wow well done!
Cya mate!
Claudio67 said:
When you see the logo release only the power button immediatly after 5-6 second the recovery should appear...
If you will not able to get the recovery look here:
http://forum.xda-developers.com/showthread.php?t=1186406
I had the same problem and:
1) Start LG Mobile update
2) Power off your phone without USB cable
3) Connect the USB cable and wait for the LG logo and the annimation battery
4) Pressing Vol.up + power 6-7 seconde wait for the LG logo and The screen turns off
5) Again pressing Vol.up + power 6-7 seconde and wait until the drivers are installed (LG Mobile update detects your phone and the screen is always off)
Here I was lucky because lgupdater detected my phone and then said that an update was needed. Applied and then everything went fine.
PS sorry for my english...
Click to expand...
Click to collapse
I have the stock v10c ROM on a 'Rogers' LG Optimus 3D.
I had been using the Google+ Android client and pushed the power button to put the phone tosleep (with the G+ screen still being displayed). About 15 mins later I pulled the phone out of my pocket and it was dark, but the touch countrols were all lit up.
I know that usually isn't good news.
I pulled the battery and tried to re-boot. It gets to the Rogers bitmap and then boot-loops, with a flash of the Rogers scren each time it restarts a cycle.
I did vol+down+Power and the it booted into a recovery (3e) menu that only offered me the chance to wipe all user data. Ok. I did that. The phone then presented a triangle logo and the green android and sat there.
After about 10 mins I pulled the battery again and did the Vol+down+3D button+Power boot to the REAL recovery menu.
I then did a factory reset. I have assumed the Home button is the enter button (BTW).
Again the triangle and the green android appear. They are still there 10 mins later.
Not sure what to do now...the phone won't boot and the factory reset won't fix it. But it isn't dead. I can still get to recovery, so in theory this is fixable. I just don't have time for it right now.
I was wondering if maybe the phone had updated OTA in my pocket and i didn't realise it and I may have messed up the process. But I have never seen a phone do an OTA update without first notifying the user and seeking confirmation...so I that probably isn't the case.
Very annoying.
I'm posting this here in case anyone else has the same experience.

[Q] optimus 3D stuck on Boot logo....help

hi boys
i just wanted install CWM in Rom-manager....i searched for it it found
LGE X2....and i installed it, after that i restarted the phone and now the phone stoped on Boot logo...........i mean when i want power on it, it stuck in LG logo
what must i do to fix it..........please help meeee.........please..........i afraid so muchhhhhhhhhhhhh
helppppppppppppppppppppppp
1 - Turn off your phone
2 - Press power and volume down until the LG logo apears.
3 - Release the power button but keep the volume down pressed.
This takes you to the recovery screen.
Do a factory reset using the volume button to scroll and the 3d button to select.
Hopefully this works otherwise like me at a couple of occasions you will need to flash a KDZ
if my post above does not work. take a look at the following link
http://forum.xda-developers.com/showthread.php?t=1186406

[Q] HELP potential brick

my phone is canadian version of g2x, p-999dw (wind mobile)
my phones not bricked turns on but stuck at team eagle blood after trying to upgrade to ICS 4.0.3 fallow instructions online i screwed up now i need help
when i get stuck on logo power + volume up will = hard restart after i hold and press for 5 sec.
power + volume down at boot screen hold tell recovery, this is where i need help because these are the functions on my phone in the system recovery version <3e>
volume control = up/down
home key = menu display enable/disable
and i don't have a batten on my phone to select any options
so how can i fix my phone used just my computer?
please i need help by the end of work today!!!!
Use the volume keys to navigate through the options then use the power button to select the option that you need.
Sent from my LG-P999 using XDA
try nvflash'in it again.. that will resolve you.
i've tried the power batten it really does nothing at all....
When you're scrolling down and hit the bottom of the menu and it goes back to the top if you do it a few times it says the buttons were disabled and you have do it again a few times to re-enable them. You wouldn't happen to be disabling the buttons and that why it doesn't work? You could also try using the touch version of CWM
Do you have rom manager installed rite?
Sent from my LG-P999 using XDA
man i dont have anything on my phone i cant load it, ive tried to load ATX mode but it is a no go
im stuck with the TEAM EB logo stuck on my phone ive powered down tried to get to recovery but i can not select any options i can only display them
and yes my power button still works valume up + power hold for 5 sec reboots the phone
Ive tried valume up and down insert USB and it wont load axt mode...
can i fix this threw my computer because im having a hard time running nvflash....
Hey bro, the search button is the select button...and your phone is the same as Tmobile here in the states. Still a great phone.
xBkKx said:
When you're scrolling down and hit the bottom of the menu and it goes back to the top if you do it a few times it says the buttons were disabled and you have do it again a few times to re-enable them. You wouldn't happen to be disabling the buttons and that why it doesn't work? You could also try using the touch version of CWM
Click to expand...
Click to collapse
well this would be nice but i cant load my phone so i cant change anything
and im using the android system recovary <3e> not clockworksmod because clockworksmod isnt installed any more
please help....
g1-and-only said:
Hey bro, the search button is the select button...and your phone is the same as Tmobile here in the states. Still a great phone.
Click to expand...
Click to collapse
the only button that works man is the home button... and it just pulls up the menu or hides it
my search button will not do anything...
ive tried every button
ok well apx mode started on my phone
s/w upgrade
please wait while upgrading
now i dont have any apx drivers on my computer please help
ok good!!! i restarted my phone and i got APX mode to load on the computer now
thanks to everyone who replyed

[Q] phone does not shows any thing after factory reset

I had a rooted lg p500 phone. It had official 2.3 (gingerbread) android.
It was somewhat slow so i restore factory settings from settings menu. Now when I power on it shows slide unlock screen and after unlocking, it does not shows anything. Just top navigation bar (which can be slide from top ) is shown.
It was installed with clockworld mode recovery, but now it is also not booting in recovery mode after pressing power+vol down + home button.
Please help me what to do??
Is it possible to flash official firmware from lg service center?
Is it now rooted or not?
Do lg service center will flash new firmware?
Follow this tutorial http://forum.xda-developers.com/showthread.php?t=883314
Sent from my LG-P500

[Completed] Lg g3 download mode not working.

Hi everybody there. Am facing a huge problem on my LG G3. I don't know exactly what LG G3(Verizon,Sprint or whatever) it is. I am Malian (West African) and the phone was working fine. One morning it just didn't turn on normally. when I turn it on the sceen lights up and won't even progress to LG logo. Just a dimmed screen with black background. When I hold Vol+ down and plug the phone to my laptop it brings me to recovery mode with the red danger panel on the android logo. From there I can access recovery mode by clicking on the Power key. I see the different options(reboot system now,apply update from ADB etc.) To resolve it,I referred to a former threat . I downloaded Europe Common 16G D85510A_00.kdz ( hope this matches my 16GB G3) from a previous thread and tried to apply it thru LG flash tool 2014 but it's impossible because of,I think,the absence of download mode. I also tried holding down Vol- and plugging the phone. Drivers are installed but when I begin flashing the Lg support tool pops up and says phone is not connected.Briefly let's say that Recovery mode works but not download mode. Please help!!!: confused
TIM OF GOD said:
Hi everybody there. Am facing a huge problem on my LG G3. I don't know exactly what LG G3(Verizon,Sprint or whatever) it is. I am Malian (West African) and the phone was working fine. One morning it just didn't turn on normally. when I turn it on the sceen lights up and won't even progress to LG logo. Just a dimmed screen with black background. When I hold Vol+ down and plug the phone to my laptop it brings me to recovery mode with the red danger panel on the android logo. From there I can access recovery mode by clicking on the Power key. I see the different options(reboot system now,apply update from ADB etc.) To resolve it,I referred to a former threat . I downloaded Europe Common 16G D85510A_00.kdz ( hope this matches my 16GB G3) from a previous thread and tried to apply it thru LG flash tool 2014 but it's impossible because of,I think,the absence of download mode. I also tried holding down Vol- and plugging the phone. Drivers are installed but when I begin flashing the Lg support tool pops up and says phone is not connected.Briefly let's say that Recovery mode works but not download mode. Please help!!!: confused
Click to expand...
Click to collapse
Hi, thanks for using XDA assist!
Please ask your question here:
http://forum.xda-developers.com/lg-g3/help/help-thread-lg-g3-question-t2947298
That's a friendly help thread, specifically for the LG G3. You'll get the help you need there.
Good luck!
Thread closed.

Categories

Resources