Elementalx kernel on ViperXL question - AT&T, Rogers HTC One X, Telstra One XL

This kernel is available inside Viper Hub for download. I see many prefer this kernel over Beastmode. My question is- it's a direct download and install inside the Hub.
It offers install option and then prompts an obvious warning about possible bootloops etc. Have any of you installed it from Viper Hub ? I've already made a recovery of my current setup. Just wanting to see if the kernel install goes smoothly. Viper's faq section says it doesn't use ramdisk properties so it can be installed easily.
I'm just making sure before I click the install button and possibly spit up my egg nog if I bootlooped.
Thanks in advance,
Jon
Sent from my HTC One XL using xda app-developers app

Yeah I have, works great!
Viper Rom, baby!

xxBrun0xx said:
Yeah I have, works great!
Viper Rom, baby!
Click to expand...
Click to collapse
I forgot to mention I'm on 2.4.1.
Thanks for the reply.
Sent from my HTC One XL using xda app-developers app

Pretty new to the kernel world but I read up before changing mine.
I installed ElementalX and it installed successfully, rebooted and all was fine. However, when I looked on SetCPU for info, it still showed 1512. When I looked in Viper Hub under CPU, it wouldn't go past 1512 (not using both CPU apps at the same time obviously). It also had custom kernel portions greyed out.
What am I missing here?! I set everything to default when I went through the kernel installer as well with 1.7 as default. Shouldn't I be able to see statistically that the options ElementalX should be providing?
Any education here is appreciated!
Jon
Any advice???
Sent from my HTC One XL using xda app-developers app

ToxicWaste said:
Pretty new to the kernel world but I read up before changing mine.
I installed ElementalX and it installed successfully, rebooted and all was fine. However, when I looked on SetCPU for info, it still showed 1512. When I looked in Viper Hub under CPU, it wouldn't go past 1512 (not using both CPU apps at the same time obviously). It also had custom kernel portions greyed out.
What am I missing here?! I set everything to default when I went through the kernel installer as well with 1.7 as default. Shouldn't I be able to see statistically that the options ElementalX should be providing?
Any education here is appreciated!
Jon
Any advice???
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
Hmm I'm curious if you're on hboot 1.14

He is lol.
Sent from my One X using Tapatalk 2

Yes firmware version 2.20. I apparently have made a mistake then?
Didn't think I'd be putzing with my phone on Christmas eve while around family but I am. Haha
So this I assume means it is not useable for me? :banghead:
Sent from my HTC One XL using xda app-developers app

no bro you can... I'm not sure though since I haven't used viper in a while and I'm on old hboot... But the problems some people been having with custom kernels is that they use aroma installer..
See what happens is, aroma starts, and gives you options on how much overclock you want, tweaks, S2W, etc etc... It creates a boot.img based on your choices... Lemme download viper, I'll pull my boot.img for you so you can do it through flashgui. Sounds good?
If so, how high you want your max freq to be?
Sent from my HTC One XL using Tapatalk 2

ToxicWaste said:
This kernel is available inside Viper Hub for download. I see many prefer this kernel over Beastmode. My question is- it's a direct download and install inside the Hub.
It offers install option and then prompts an obvious warning about possible bootloops etc. Have any of you installed it from Viper Hub ? I've already made a recovery of my current setup. Just wanting to see if the kernel install goes smoothly. Viper's faq section says it doesn't use ramdisk properties so it can be installed easily.
I'm just making sure before I click the install button and possibly spit up my egg nog if I bootlooped.
Thanks in advance,
Jon
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
installed from viper hub, no problem at all. the old elementalx doesn't not support viper 3.0

I have tried all kernals in viper hub. They all work, personally I love elemental . As you install it asks you setup options...As always backup to be safe . I prefer not to oc gpu but that's me..
Sent from my HTC One XL using xda premium

kanhou said:
installed from viper hub, no problem at all. the old elementalx doesn't not support viper 3.0
Click to expand...
Click to collapse
I am on 2.4.0. I installed ElementalX through the Venom Hub. I went through all the installation selections and used default for most (chose not to have s2w) and I rebooted through twrp. When I checked everything, there was no evidence the kernel installed!! Still says Linux kernel, can't clock over 1512 either. I'm on firmware version
2.20.
DESERT.TECH said:
I have tried all kernals in viper hub. They all work, personally I love elemental . As you install it asks you setup options...As always backup to be safe . I prefer not to oc gpu but that's me..
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Sent from my HTC One XL using xda app-developers app

Well now that were home from some Christmas family functions, I couldn't wait to mess with my phone. Hahaha.
I went into twrp and flashed the kernel again low and behold, it worked the 2nd time. Not sure why the 2nd time but I'm not complaining. Now I can access all the features of ElementalX.
Time to learn more!!
Merry Christmas!!
Sent from my HTC One XL using xda app-developers app

Hello all, first time poster to this forum. Sorry for the newb question but here goes....
I want to use a different kernel (Elemental X) for more battery and CPU control, and I want to make sure my hboot version is the right one. How can I find out what my hboot version is?
HTC One X
Viper XL 3.2.6
Thanks

rogue0526 said:
Hello all, first time poster to this forum. Sorry for the newb question but here goes....
I want to use a different kernel (Elemental X) for more battery and CPU control, and I want to make sure my hboot version is the right one. How can I find out what my hboot version is?
HTC One X
Viper XL 3.2.6
Thanks
Click to expand...
Click to collapse
Just go do s off first

Hold power button and volume down until lights stop flashing. Release power while continuing to hold volume down. You will see hboot version in boot loader screen.
Sent from my HTC One X using xda premium

ChrisPBacon said:
Hold power button and volume down until lights stop flashing. Release power while continuing to hold volume down. You will see hboot version in boot loader screen.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Or sense he's on viper just hold power button till you see restart ment click restart then bootloader

Thanks to all of you that responded. I found my hboot version (1.14)

You're going to want to do the s off then it's quick and painless
---------- Post added at 05:54 PM ---------- Previous post was at 05:53 PM ----------
http://forum.xda-developers.com/showthread.php?t=2155071

a box of kittens said:
Just go do s off first
Click to expand...
Click to collapse
I really hope you listened to box of kittens especially if you on 1.14
Sent from my HTC One X using xda premium

http://forum.xda-developers.com/attachment.php?attachmentid=1179735&d=1344782533
If you already don't have adb and fastboot set up download this to your computer put it somehwere wherever... Now from the s off thread you'll the one x zip place it in this folder and you see the s off thing EXTRACT it to the folder and then do just copy paste the commands... And the time it has three commands in one box rememebr do each one by one

Related

[Q] suggestions on getting less heat from phone

im on ARHD 3.6.2 ,
after couple of minutes of playing games but phone is super hot i mean i cant even touch the bottom part of the phone (where the home button etc is at)
anyway i know there are some solutions or think there are solutions ,
i would like to know which one you think is the best?
solutions that i think will help:
1. run the patch to down clock to 1.2 - in mike's first post
2. run the thermal patch on faux kernel's thread
3. change my kernel to bricked kernel
also i got anker battery if its important.
if you have other suggestions it will be really good to hear them out.
I ran the thermal patch and it has worked pretty well for me. I haven't had my phone get as hot as you were describing earlier however, it was uncomfortable to hold even through my case.
Sent from my HTC Sensation XE with Beats Audio using XDA App
eric1990 said:
I ran the thermal patch and it has worked pretty well for me. I haven't had my phone get as hot as you were describing earlier however, it was uncomfortable to hold even through my case.
Sent from my HTC Sensation XE with Beats Audio using XDA App
Click to expand...
Click to collapse
Which thermal patch did you use? I have the same issue.
beans_p_ said:
Which thermal patch did you use? I have the same issue.
Click to expand...
Click to collapse
Sorry about the delay, it took me a little while to find it again.
Download link below.
http://www.multiupload.com/PI3IGRO16G
Happy flashing!
Edit: Don't forget to clear your cache partition and your dalvik caches. And remember ALWAYS back-up prior to flashing, just incase.
Sent from my HTC Sensation XE with Beats Audio using XDA App
Got the same issue. CM7 a8 taimat kernel.
Sent from my Sensation using xda premium
The faux kernels and patch is based on HTC source code for the above patch. The patch you want to use for CM7 can be found at the link below.
http://www.multiupload.com/PI3IGRO16G
Sent from my HTC Sensation XE with Beats Audio using XDA App
you guys might want to download faux clock apk to help with the manual set up of the kernel specs.
just a suggestion. always helps to know exactly what your working with and be in control. its a little more detailed than say oc daemon.
side note: remember to try and uninstall if you have issues in the future trying to flash new kernels.
i will give a try to the thermal patch..
but i dont holds to much hope for it to work...
unless it some miracle patch
my phone getting really hot.. its really weird what is the reason
Would this patch work on the stock kernel?
Sent from my HTC Sensation Z710e
What ROM are you running?
Edit: Yes, use the top download.
Remember to backup and clear caches before flashing.
(i didn't see your signature at first)
Sent from my HTC Sensation Z710e using XDA App
eric1990 said:
What ROM are you running?
Edit: Yes, use the top download.
Remember to backup and clear caches before flashing.
(i didn't see your signature at first)
Sent from my HTC Sensation Z710e using XDA App
Click to expand...
Click to collapse
Alright then. Appreciate it.
Edit: I would "Thank You" but I'm using the xda app atm
Sent from my HTC Sensation Z710e
mzmo said:
Alright then. Appreciate it.
Edit: I would "Thank You" but I'm using the xda app atm
Sent from my HTC Sensation Z710e
Click to expand...
Click to collapse
No problem, if you happen to log on and remember feel free to thank me then.
Sent from my HTC Sensation Z710e using XDA App
applied the thermal patch by faux.
it didnt help.
still phone getting alot of heat.
so.. whats next?
BshadoW1 said:
applied the thermal patch by faux.
it didnt help.
still phone getting alot of heat.
so.. whats next?
Click to expand...
Click to collapse
What setup do you have? Currently I'm running Android Revolution HD 4.1.3 with faux kernel 0.2.2 beta 2 and I am getting no heat problems like I was when I was running 0.2.1 final. I also have amaze camera, modified bootanimations, EQS, APM, custom battery icon, and the 4G symbols added on. Only thing I did was switch my kernel. The patch helped with the 0.2.1 final faux kernel some but not as much as I would have liked so I switched kernels. I would recommend giving this kernel a try. Link below
http://forum.xda-developers.com/attachment.php?attachmentid=751549&d=1318778853
Sent from my HTC Sensation Z710e using XDA App
Does the patch work for other kernels? Or just for faux's?
septix said:
Does the patch work for other kernels? Or just for faux's?
Click to expand...
Click to collapse
The patch will work with any rooted sensation ROM/kernels according to Faux
Sent from my HTC Sensation Z710e using XDA App
eric1990 said:
The patch will work with any rooted sensation ROM/kernels according to Faux
Sent from my HTC Sensation Z710e using XDA App
Click to expand...
Click to collapse
Thanks dude
Sent from my Sensation using xda premium
BshadoW1 said:
im on ARHD 3.6.2 ,
after couple of minutes of playing games but phone is super hot i mean i cant even touch the bottom part of the phone (where the home button etc is at)
anyway i know there are some solutions or think there are solutions ,
i would like to know which one you think is the best?
solutions that i think will help:
1. run the patch to down clock to 1.2 - in mike's first post
2. run the thermal patch on faux kernel's thread
3. change my kernel to bricked kernel
also i got anker battery if its important.
if you have other suggestions it will be really good to hear them out.
Click to expand...
Click to collapse
No need to cool it down.
If it gets that hot, there is a problem with either sw or hw, it's not normal. So instead of healing symptoms you should look for a cause.
i cant think of any cause,
as my phone worked great before i rooted it and installed ARHD
after i got mike's Rom each time (no matter which version) i ran a game (most likely angry birds) for more then 10 min the phone start to get really really hot.
so.. any ideas? its must be a rom issue which need to be fixed but i got no clue what to do next
BshadoW1 said:
i cant think of any cause,
as my phone worked great before i rooted it and installed ARHD
after i got mike's Rom each time (no matter which version) i ran a game (most likely angry birds) for more then 10 min the phone start to get really really hot.
so.. any ideas? its must be a rom issue which need to be fixed but i got no clue what to do next
Click to expand...
Click to collapse
Mike's ROM over clocks the CPU and that can result in generating a lot of excess heat. Use the Daemon to put the CPU back to the wake max setting of 1188000.

Can't get to recovery.

So I was going to switch roms on the fly and use flash image gui and found the rom, selected recovery img, and flashed. Success, so i rebooted to recovery. Weird part is, it took me to bootloader. Thinking I hit the wrong thing I moved to recovery and it sends me to fastboot. I assume I did something wrong and have to flash twrp again?
KungPow90 said:
So I was going to switch roms on the fly and use flash image gui and found the rom, selected recovery img, and flashed. Success, so i rebooted to recovery. Weird part is, it took me to bootloader. Thinking I hit the wrong thing I moved to recovery and it sends me to fastboot. I assume I did something wrong and have to flash twrp again?
Click to expand...
Click to collapse
Anyone have a thought before I just try something and accidentally brick my phone? Lol
KungPow90 said:
Anyone have a thought before I just try something and accidentally brick my phone? Lol
Click to expand...
Click to collapse
Download twrp for Evita
Boot into fastboot
fastboot flash recovery filename.img
K I got TWRP but everytime I power down the phone, it jumps back into fastboot 5 seconds later. Uhm, What? lol. I messed up bad this time...
KungPow90 said:
K I got TWRP but everytime I power down the phone, it jumps back into fastboot 5 seconds later. Uhm, What? lol. I messed up bad this time...
Click to expand...
Click to collapse
Fastboot reboot recovery
That command doesn't work. To execute a fastboot command you need to have the phone in bootloader right?I tried it from fastboot and from bootloader.
Download goo.im and install recovery from the app
Sent from my HTC One XL using Tapatalk 2
rpomponio said:
Download goo.im and install recovery from the app
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
That worked! Im in TWRP now. Thanks so much! Worried I wouldn't be able to boot up but I did. Phew!! Dont do that again... ok then. Is there any way to flash the boot img on the fly without fastboot?
Depends on the Rom. A lot of them you just download Rom to sd card then intall through twrp. No img fastboot needed on a lot of roms when using twrp. What img are u trying to flash?
Sent from my HTC One XL using xda premium
Idk any. I was trying to flash clean rom 5.1 but it always gets stuck on the boot.
In the current ics version of venom rom the camera refuses to work. I can sometimes open the app but is always a black screen. Any ideas?
Sent from the best d*** phone I've ever used
http://forum.xda-developers.com/showthread.php?t=1671237
this link has all roms and instruction. Very handy for hox
Sent from my HTC One XL using xda premium
DESERT.TECH said:
http://forum.xda-developers.com/showthread.php?t=1671237
this link has all roms and instruction. Very handy for hox
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Thanks! As regards the camera issue... Thoughts?
Sent from the best d*** phone I've ever used
Hmm I believe that viper 2.4.2 addresed camera issues. To get that version you have to do ota update and it pushes update to your phone ...so if you have viper 2.4.0 just check for update as you would normally
Sent from my HTC One XL using xda premium
DESERT.TECH said:
Hmm I believe that viper 2.4.2 addresed camera issues. To get that version you have to do ota update and it pushes update to your phone ...so if you have viper 2.4.0 just check for update as you would normally
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
I think you meant 2.4.1.
ATT HOX Premium App--Stock is fine but modded is Creative
DESERT.TECH said:
Hmm I believe that viper 2.4.2 addresed camera issues. To get that version you have to do ota update and it pushes update to your phone ...so if you have viper 2.4.0 just check for update as you would normally
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
I did the ota update and I'm running it now. Still no dice with the camera. Starting to get annoying. Can't find anything like this online. Any other ideas?
Edit: I am running elementalx kernel. There's another q in here about the same Rom with the same issue running beastmode kernel. Could this have something to do with it?
Sent from the best d*** phone I've ever used
Ya camera issue isn't new. I never had any issues but I suggest posting question in this thread as it specializes that Rom
http://forum.xda-developers.com/showthread.php?t=1868236
Sent from my HTC One XL using xda premium
DESERT.TECH said:
Ya camera issue isn't new. I never had any issues but I suggest posting question in this thread as it specializes that Rom
http://forum.xda-developers.com/showthread.php?t=1868236
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Got it. Thanks man. Think of anything else pm me,
Thanks!
Sent from the best d*** phone I've ever used

[Q] JB Sense ROMs not booting for me

I've run multiple versions of CleanROM and also CM10, but anytime I install a Sense based JB ROM (I've tried Newt's, JellyBlam, and a few others), my phone gets stuck on the HTC boot splash, reboots, and enters recovery. I am on HBOOT 1.09 and Ive tried to fastboot flash the boot.img just to be sure, but it still doesn't work? I'm sure I'm doing something wrong, any clue what it is? Thanks in advance.
Are you doing full wipes before flashing?
Sent from my HTC One XL using xda app-developers app
area51avenger said:
Are you doing full wipes before flashing?
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
I do a factory reset in TWRP. Does that count, or is there more to it?
Grazzert said:
I do a factory reset in TWRP. Does that count, or is there more to it?
Click to expand...
Click to collapse
Tell us what ROM you're trying to install. Also, you're right about the reset. Do all of that in twrp.
Sent from my One X using xda premium
ToxicWaste said:
Tell us what ROM you're trying to install. Also, you're right about the reset. Do all of that in twrp.
Sent from my One X using xda premium
Click to expand...
Click to collapse
Newt's
Grazzert said:
Newt's
Click to expand...
Click to collapse
Are you sure it successfully installed?
omario8484 said:
Are you sure it successfully installed?
Click to expand...
Click to collapse
The log says it successfully installed and when i press reboot system, the sequence of events i described in OP happens
Factory reset and wipe system and both caches
Sent from my HTC One XL using xda app-developers app
area51avenger said:
Factory reset and wipe system and both caches
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
same thing happens :/
bump for answers....
Sounds like the correct procedure to me.
Sent from my HTC One XL
ECEXCURSION said:
Sounds like the correct procedure to me.
Sent from my HTC One XL
Click to expand...
Click to collapse
And yet it won't work. lol
Maybe you have an init.d folder that is telling the JB ROM to overclock? Could check and delete that first. Otherwise you can double check the md5 of the ROM you're flashing to make sure its not corrupt. Aside from that it might be worthwhile to try a ROM like urdroid which allows you to flash the kernel during the installer.
Dunno man, your problem is a strange one.
Sent from my HTC One XL
ECEXCURSION said:
Maybe you have an init.d folder that is telling the JB ROM to overclock? Could check and delete that first. Otherwise you can double check the md5 of the ROM you're flashing to make sure its not corrupt. Aside from that it might be worthwhile to try a ROM like urdroid which allows you to flash the kernel during the installer.
Dunno man, your problem is a strange one.
Sent from my HTC One XL
Click to expand...
Click to collapse
Urdroid was another that i tried. It would get to the ROMs boot splash and lock there, but its the only one i recall that even got that far out of the 3 or so that i tried. where would that init.d folder be?
Either the directory of the /sdcard or /. I forget which as I have deleted it. But it should be a folder. Don't delete it if it's by itself.
Sent from my HTC One XL
Really sounds like you are not flashing the boot.img correctly.
Extract the boot.img from the ROM you want to use and install it with:
fastboot flash boot boot.img
You're not alone....
Grazzert said:
Urdroid was another that i tried. It would get to the rom's boot splash and lock there, but its the only one i recall that even got that far out of the 3 or so that i tried. where would that init.d folder be?
Click to expand...
Click to collapse
I've been experiencing the same problem on my HTC Sensation 4G for the past couple years since I've had it. I have 3 HTC Sensations in my family and I've been playing around with all 3 phones during the last year. On my sister and my mom's phones, I'm able to install any rom (Sense-based...ARHD, Elegencia; and AOSP/AOKP-based...CM10, Paranoid Android, etc); however, on my own phone, after dozens of installs, trying all types of different kernels and roms, I was only able to install AOSP/AOKP-based ones. I've been running Touchcream ICS rom for awhile, then Paranoid Android, and currently JB Samsation V5 on my HTC and I love it. I'm really not missing out on anything, but it's just weird Sense-based roms just wouldn't boot. After some researching on the forum and experimenting with others, I've deducted that the reason could be very well my own hardware. :victory:

[Kernel] Elementalx issues

If anyone is having trouble with the later versions of elementalx I have found that v5.4 has no issues. I don't know what the problem is but anything above that has not worked for me on any sense based ROM. I am on 1.09 hboot and s-on. Currently I am running the miui v5 3.5.3 as my daily driver despite the MMS problem, soon to be fixed on the next update, hopefully
Sent from my One XL using xda app-developers app
I have never been able to flash any elemental kernel. I've tried every one, on multiple roms, tried messing with all of the settings...each time the phone starts rebooting itself within a few minutes of boot. I must just have some strange hardware. Bulletproof kernels work great.
Sent from my HTC One XL using xda app-developers app
dominatordave said:
I have never been able to flash any elemental kernel. I've tried every one, on multiple roms, tried messing with all of the settings...each time the phone starts rebooting itself within a few minutes of boot. I must just have some strange hardware. Bulletproof kernels work great.
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
The bulletproof kernels are a solid choice.
I also remember 5.4 as being a particularly stable release.
This post was created and transmitted completely in analog.
I was on 5.4 for about 2 months and then recently upgraded to 6.6 and no problems to speak of.
What do you mean 'does not work for you'? What happens when you install it? I'm assuming you are flashing the boot.img since you are S-On.
I've tried both 6.6 and 6.7 and haven't had any issues.
Sent from my One XL using XDA Premium
The problem I'm having is I get a popup message constantly(android.process.com has stopped). As far as know I don't need to flash a boot.img considering I'm on hboot 1.09. Never had this with any other kernel whether it be aosp or sense based.
Sent from my One XL using xda app-developers app
libra83 said:
The problem I'm having is I get a popup message constantly(android.process.com has stopped). As far as know I don't need to flash a boot.img considering I'm on hboot 1.09. Never had this with any other kernel whether it be aosp or sense based.
Sent from my One XL using xda app-developers app
Click to expand...
Click to collapse
This only happens on later versions of elemental x? If you flash back to 5.4 does the process stop force closing?
Also, check the message...ls it com.android.process.acore or com.android.process.phone?
This post was created and transmitted completely in analog.
Still having issues.
=JKT= said:
This only happens on later versions of elemental x? If you flash back to 5.4 does the process stop force closing?
Also, check the message...ls it com.android.process.acore or com.android.process.phone?
This post was created and transmitted completely in analog.
Click to expand...
Click to collapse
Yes flashing back to 5.4 fixes the fc issues. Sorry for the confusion on the message. I've been working long hours lately. It is the second one mentioned above. Is it possible that even though I'm on the earlier hboot that i still need to be s-off because of the newer versions of kernels? Thanks for your time looking in to this issue.
S-off would make no difference with kernels. It would make more sense for your hboot version is causing it. Hard to say for sure without testing though. You did check md5 prior to flashing right?
Sent from my HTC One X using xda app-developers app
I'm on hboot 1.09 with s-off and i get similar issues, reboots, glitchy screen flickers
I am never getting issues like that
Sent from my HTC One XL using xda premium

HTC One X thinks its an HTC One XL

I installed ViperXL on my HTC One X and I was going to install ElementalX kernel on my one X and when it semi bricked I went through the viperXL installer and installed the Stock XL kernal and ever since then it's had a lot of random reboots on whaterver Rom I put it on.
I'm on CleanROM now for one X and it still reboots.
It thinks it's a one XL and I have no idea what to do.
HTC one x from at&t is the same as HTC one xl
Sent from my One X using XDA Premium 4 mobile app
jluca98 said:
HTC one x from at&t is the same as HTC one xl
Sent from my One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well something is different because I cannot install ViperX Because the kernal difference.
What are your bootloader details?
PS. At&t one x = htc one xl.
Sent from my Evita
Nothing is different you are just doing it wrong. I'm not trying to start an argument just trying to inform you.
Sent from my One X using XDA Premium 4 mobile app
timmaaa said:
what are your bootloader details?
Ps. At&t one x = htc one xl.
Sent from my evita
Click to expand...
Click to collapse
*** tampered ***
*** unlocked ***
evita pvt ship s-off rl
cid-11111111
hboot-1.14.0002
It is an AT&T HTC One X With Super CID and S-OFF
But the kernal Is what caused the random reboots cause it did not start till I simi bricked and I installed a XL kernal through the viperXL installer.
Im going to use the official RUU updater so it can reset back.
Just reflash the ROM and you should be fine.
Sent from my Evita
timmaaa said:
Just reflash the ROM and you should be fine.
Sent from my Evita
Click to expand...
Click to collapse
Ive reflashed roms many times. Im pissed cause it keeps reseting and its annoying. So Im trying to use the official RUU Updater to see If that will work, Also my USB is not connecting to my pc corectly. I can only add music or pics from the htc sync manager and its ping me off.
Ok I'd suggest you try using the RUU then, but you'll need to diagnose why it isn't connecting properly via usb first, the last thing you want is for it to disconnect half way through the RUU process.
PS. I understand you're frustrated, but profanity isn't allowed on XDA.
Sent from my Evita
timmaaa said:
Ok I'd suggest you try using the RUU then, but you'll need to diagnose why it isn't connecting properly via usb first, the last thing you want is for it to disconnect half way through the RUU process.
PS. I understand you're frustrated, but profanity isn't allowed on XDA.
Sent from my Evita
Click to expand...
Click to collapse
I'm very sorry if I offended you or any one.
I installed the RUU My TWRP was removed, but I'm still Unlocked, SuperCID and my S-OFF are still on, and my kernal version says 3.4.10-g310e8f1
[email protected] #1
SMP PREEMPT
My USB is now functioning as it should but it is now thinking it is a camera instead of a storage unit untill clicked on, Then I see internal storage.
And what is this wierd N in a square by my 4G?
Weird N = NFC. Unfortunately Samsung's had that for a while, and I think Sony and LG have to have that in their notification bar as well. It just means your NFC is toggled on.
Which is a real shame. NFC barely takes any battery power (unless you're back-to-back with another ICS+ NFC phone 24/7) and should always be kept on. Sucks that more space is wasted to the notification bar just to notify you that it's ready for action.
tjhooker73 said:
I'm very sorry if I offended you or any one.
I installed the RUU My TWRP was removed, but I'm still Unlocked, SuperCID and my S-OFF are still on, and my kernal version says 3.4.10-g310e8f1
[email protected] #1
SMP PREEMPT
My USB is now functioning as it should but it is now thinking it is a camera instead of a storage unit untill clicked on, Then I see internal storage.
And what is this wierd N in a square by my 4G?
Click to expand...
Click to collapse
Ok it looks like you're all good then. You can flash TWRP again now and install a custom ROM if you want to.
Sent from my Evita
timmaaa said:
Ok it looks like you're all good then. You can flash TWRP again now and install a custom ROM if you want to.
Sent from my Evita
Click to expand...
Click to collapse
Well now I'm going to try Vemon viperX
tjhooker73 said:
Well now I'm going to try Vemon viperX
Click to expand...
Click to collapse
Hang on, ViperX or ViperXL? You have the Evita, if you flash ViperX you'll brick your phone.
You need to remember your phone IS NOT the HTC One X, it's the HTC One XL / AT&T One X.
Only ever download ROMs from our device forum which is here:
http://forum.xda-developers.com/forumdisplay.php?f=1538
The development sections are here and here.
Don't ever stray from our forum.
Sent from my Evita
timmaaa said:
Hang on, ViperX or ViperXL? You have the Evita, if you flash ViperX you'll brick your phone.
You need to remember your phone IS NOT the HTC One X, it's the HTC One XL / AT&T One X.
Only ever download ROMs from our device forum which is here:
http://forum.xda-developers.com/forumdisplay.php?f=1538
The development sections are here and here.
Don't ever stray from our forum.
Sent from my Evita
Click to expand...
Click to collapse
I installed it then saw your post then imidiatly installed cleanROM with ElementalX kernal and rewiped complelty, then installed the RUU again, then ElementalX kernal and ViperXL again now it seems fine with USB still working
tjhooker73 said:
I installed the RUU My TWRP was removed,
Click to expand...
Click to collapse
Of course it was. RUU re-installs stock recovery.
---------- Post added at 11:24 AM ---------- Previous post was at 11:23 AM ----------
tjhooker73 said:
Well something is different because I cannot install ViperX Because the kernal difference.
Click to expand...
Click to collapse
Were you on an old version of TWRP? Because TWRP 2.5 was known to always fail flashing ViperXL and other ROMs (CleanROM and others). More recent versions of TWRP (2.6) work fine. So it may have been the fact that you had to re-install TWRP that made the difference.

Categories

Resources