[Q] No service after new ROM flash - Verizon Samsung Galaxy S III

I previously had CM10 (experimental) and was having issues with crashes so I decided to flash a new ROM on my device.
I then chose to flash onto LiquidSmooth 4.2.1. After playing around in Liquid, I found some bugs and decided to look for a new ROM to flash.
I chose to flash to CM10.1 Nightly, which I know has data issues. I wiped pretty much everything prior -Dalvik, formatted my SD, formatted system, and whatnot. After my first boot, the phone could not finish "activating the network"
Right now I cannot send/receive calls or texts or have data. I have a small "R" at the top of my signal bars where 4G usually is. I have tried dialing *#*#4636#8#* and made sure LTE/GSM/CDMA auto (PRL) was selected.
Would flashing to stock ROM resolve this issue? Or what could be causing this?
Thanks in advance

Saiko18 said:
I previously had CM10 (experimental) and was having issues with crashes so I decided to flash a new ROM on my device.
I then chose to flash onto LiquidSmooth 4.2.1. After playing around in Liquid, I found some bugs and decided to look for a new ROM to flash.
I chose to flash to CM10.1 Nightly, which I know has data issues. I wiped pretty much everything prior -Dalvik, formatted my SD, formatted system, and whatnot. After my first boot, the phone could not finish "activating the network"
Right now I cannot send/receive calls or texts or have data. I have a small "R" at the top of my signal bars where 4G usually is. I have tried dialing *#*#4636#8#* and made sure LTE/GSM/CDMA auto (PRL) was selected.
Would flashing to stock ROM resolve this issue? Or what could be causing this?
Thanks in advance
Click to expand...
Click to collapse
Flash an unofficial build and set CDMA subscription to ruim/sim under mobile settings. Tell all your friends too.
Sent from my SCH-I535 using xda app-developers app

ajrty33 said:
Flash an unofficial build and set CDMA subscription to ruim/sim under mobile settings. Tell all your friends too.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I flashed back to touchwiz. I have 4G capabilities, but still no phone service. Should I still try flashing an unofficial CM10 and setting CMDA sub to ruim/sim?

Saiko18 said:
I flashed back to touchwiz. I have 4G capabilities, but still no phone service. Should I still try flashing an unofficial CM10 and setting CMDA sub to ruim/sim?
Click to expand...
Click to collapse
Check your mobile settings in touchwiz
Sent from my SCH-I535 using xda app-developers app

Saiko18 said:
I flashed back to touchwiz. I have 4G capabilities, but still no phone service. Should I still try flashing an unofficial CM10 and setting CMDA sub to ruim/sim?
Click to expand...
Click to collapse
Well that's what the other guys said no? So I'm guessing you should :thumbup:
Sent from my SCH-I535 using xda app-developers app

Related

No 4G & Spotty 3G on CM10

Hi All,
I'm having issues with my 4G on the latest nightly of CM10. It's giving me no connection to the 4G network and when it says it's connected to 3G it's still greyed out so I have no data network available to me! Since I wiped the cache's to upgrade from the 8/20 nightly do I have to do any network calibration? Should I try flashing one of the other radios here:
http://forum.xda-developers.com/showthread.php?t=1788313 ?
Thanks
I've seen this a lot on AOSP ROMS and unfortunately CM doesn't get a free pass. I'm sure it'll get better as development continues. Maybe try out a 4.0.4 based ROM. (Synergy)
Sent from my SCH-I535 using xda app-developers app
BrianDev said:
I've seen this a lot on AOSP ROMS and unfortunately CM doesn't get a free pass. I'm sure it'll get better as development continues. Maybe try out a 4.0.4 based ROM. (Synergy)
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
It's weird though, when I first flashed the rom it was connecting to 4g EVERY time it had a signal. Now i'm lucky to get 3G...

[Q] (noob) Help, tried flashing cm10.1 and now I dont have cell signal or data

So I am a noob but have successfully flashed a few roms onto my phone with no issue. Today I tried to flash cm10.1 and all hell broke loose. I flashed cm10.1 though clockworkmod (now I know that was not correct) and then reset everything and did it though bootrecovery. I also flashed the gaaps and now I do not have data or local cell service. It is showing that I am roaming (like i am out of the country) and asking me if I want the data on and would be charged for it. Any help would be greatly appreciated, at this point I have a phone that I cannot use. Thank you in advance
Check out the thread under Original Development. Known issue on that build.
mxair2001 said:
Check out the thread under Original Development. Known issue on that build.
Click to expand...
Click to collapse
Awesome, Thank you for the direction
bigmatt00 said:
Awesome, Thank you for the direction
Click to expand...
Click to collapse
can you tell me how you got your data and signal to start working
Do you have a imei #?
Sent from my SCH-I535 using xda premium
You can use APN manager pro just use titanium backup to make a system app and then you can select Verizon's APN presets that I screen shoted mine are orange because changed mine to gsm and used att
Sent from my SCH-I535 using XDA Premium HD app

Stuck on roaming...

I am stuck on roaming. I have researched it and everyone else has there imei missing but I still have everything it is just stuck.. it happened after I flashed cm10.1 please help thank you
Sent from my SCH-I535 using xda premium
schust3r5 said:
I am stuck on roaming. I have researched it and everyone else has there imei missing but I still have everything it is just stuck.. it happened after I flashed cm10.1 please help thank you
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Read the topics in this forum, there are 20,000 posts pertaining to this issue...
But to be nice do this if you are still on CM10.1....
I Have No Signal etc.can't get past the activation screen. Tap the 4 corners of the screen to bypass activation screen then go into settings> more> mobile networks> and change CDMA Subscription to RUIM/SIM and System Select to Automatic then reboot...
Click to expand...
Click to collapse
If you are back on a TW rom then use odin and flash the F2 stock image then type this in a dialer...
Code:
*2767*3855#
That reprovision code will not work on JB or later ICS builds. It was removed due to a exploit, hence why having to flash a early ICS build.
Ya sorry I flashed back to tw. But then read down the forums and found an answer. I just flashed cm without gapps and changed the nv thing to sim or whatever. I didn't have to use odin. Thanks anyway
Sent from my SCH-I535 using xda premium

Why am I having such trouble going to an AOSP ROM can keeping 4G/Data?

I know of the issue with the 4.2 ROMs. You must perform some tricks, such as change CDMA subscription, etc.. but that's not working for me. Still stuck on Roaming
So instead, everyone says.. flash a 4.1 AOSP ROM, and then dirty flash into 4.2. OK, so that doesn't work either, and even checking the CDMA subscription for RIUI or whatever, I still get stuck on Roaming.
As soon as I wipe and restore my TouchWiz backup, I'm back to no problems.
What is my plan of action in order to get a working 4.2 AOSP ROM? I've tried Wiping, 4.1 -> 4.2, and no go.
Help? I'm usually great at hacking, flashing, etc.. I got a 4.2 ROM working once, but forgot to create a backup. Now I can't get one working again.
dbornack said:
I know of the issue with the 4.2 ROMs. You must perform some tricks, such as change CDMA subscription, etc.. but that's not working for me. Still stuck on Roaming
So instead, everyone says.. flash a 4.1 AOSP ROM, and then dirty flash into 4.2. OK, so that doesn't work either, and even checking the CDMA subscription for RIUI or whatever, I still get stuck on Roaming.
As soon as I wipe and restore my TouchWiz backup, I'm back to no problems.
What is my plan of action in order to get a working 4.2 AOSP ROM? I've tried Wiping, 4.1 -> 4.2, and no go.
Help? I'm usually great at hacking, flashing, etc.. I got a 4.2 ROM working once, but forgot to create a backup. Now I can't get one working again.
Click to expand...
Click to collapse
Did you reboot after changing subscription?
Sent from my SCH-I535 using xda app-developers app
jdub251 said:
Did you reboot after changing subscription?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Tried several reboots in both 4.1, and 4.2 with clean flashes. Tried it also in the 4.1 -> 4.2 dirty flash..
The setting sticks after a reboot, but still in R mode.
Ok try this... install cm 10.1 with no g apps. This will take you straight past the activation screen. Nor only do you change subscription but also network to automatic. Then reboot. I believe it's network. Can't remember exactly but it's right above the other one. I'm not on a 4.2 ROM to see right now but I know this works for me.
Sent from my SCH-I535 using xda app-developers app
jdub251 said:
Ok try this... install cm 10.1 with no g apps. This will take you straight past the activation screen. Nor only do you change subscription but also network to automatic. Then reboot. I believe it's network. Can't remember exactly but it's right above the other one. I'm not on a 4.2 ROM to see right now but I know this works for me.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Well, for some reason that worked. Thanks. Now flying on Slimbean.
Sent from my SCH-I535 using xda app-developers app

xoom verizon verson

i have installed many rom into my xoom but all of its cannot work (or work very badly), but in almost title of theart about rom isnot show the verson of xoom . can someone show me a stable rom for my verizon xoom.
SR FOR MY ENGLISH.
Honestly, in my experience, if you want a completely stable, fully functional rom for the Stingray, stick with stock. EOS and CM10.1 both randomly lock up on me, and by doing the BigPart partition and moving into the KitKat roms, you run the risk of being in the group that lost data functionality (myself included). If I can find a solution for the data issues myself and others are having on KitKat, I'll post back here, though.
Sent from my HTC6435LVW using xda app-developers app
I was one of those that lost data capability when I set up bigpart on my Stingray. How did you flash back to stock after trying bigpart?
Sent from my Xoom using XDA Premium HD app
rapson2000 said:
I was one of those that lost data capability when I set up bigpart on my Stingray. How did you flash back to stock after trying bigpart?
Sent from my Xoom using XDA Premium HD app
Click to expand...
Click to collapse
I haven't. I've been bouncing back and forth between EOS4/CM10?1 (both of which have data BigParted, as long as you use the ElementalX kernel) and CM11/Omni 4.4 (neither of which I've been able to get data working on).
Sent from my HTC6435LVW using xda app-developers app
webeougher said:
I haven't. I've been bouncing back and forth between EOS4/CM10?1 (both of which have data BigParted, as long as you use the ElementalX kernel) and CM11/Omni 4.4 (neither of which I've been able to get data working on).
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
I'm sorry I just misunderstood. I have done the same thing... switched back and forth from Omni and CM11 on BigPart, and never had functional data service. I switched back to EOS and I now have 3G data, no LTE. My Xoom shows no IMEI number. I'm assuming the same thing is going on with yours? I've been reading up trying to figure out how to flash back to stock because the internet in general seems to agree that method is the only way to restore a lost IMEI. I'm going to try it this weekend if I have time.
Sent from my Xoom using XDA Premium HD app
rapson2000 said:
I'm sorry I just misunderstood. I have done the same thing... switched back and forth from Omni and CM11 on BigPart, and never had functional data service. I switched back to EOS and I now have 3G data, no LTE. My Xoom shows no IMEI number. I'm assuming the same thing is going on with yours? I've been reading up trying to figure out how to flash back to stock because the internet in general seems to agree that method is the only way to restore a lost IMEI. I'm going to try it this weekend if I have time.
Sent from my Xoom using XDA Premium HD app
Click to expand...
Click to collapse
Using either the testing menu or the LTE On/Off app, I'm able to get my IMEI back on EOS, CM10.1, Omni, and CM11; however, I still can't get 4G on EOS or CM10.1 and I can't get any data on Omni or CM11. If you want to go back to stock, you'll need to undo the BigPart first. To do that, just follow the steps to BigPart it, but in the first step, flash the regular RAH TWRP and not the BigPart one. From there, I'm not entirely sure. I'll do some research and post another reply if I find anything.
Sent from my HTC6435LVW using xda app-developers app
webeougher said:
Honestly, in my experience, if you want a completely stable, fully functional rom for the Stingray, stick with stock. EOS and CM10.1 both randomly lock up on me, and by doing the BigPart partition and moving into the KitKat roms, you run the risk of being in the group that lost data functionality (myself included). If I can find a solution for the data issues myself and others are having on KitKat, I'll post back here, though.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
so does it not have any mod-rom for my verizon???? .please show me a rom for my verizon
bao_kdd_05 said:
so does it not have any mod-rom for my verizon???? .please show me a rom for my verizon
Click to expand...
Click to collapse
Any rom that says "Stingray" in the title of the thread will work. There are several of them in the Xoom Android Development forum. Just be careful you don't try to install a rom that says BigPart unless you do the BigPart repartition.
Sent from my HTC6435LVW using xda app-developers app

Categories

Resources