Database Info

[Q] Cannot flash new ROM status 7

I successfully rooted my HTC Tattoo(click) and now I want to flash Cyanogenmod7. I booted to recovery (recovery from http://forum.xda-developers.com/showthread.php?t=644279), wiped Dalvik-cache and sdcard (when i wiped my sdcard, is it still a goldcard?) and did hard reset.
Then I chose "Flash zip from sdcard" and tried to flash CM7. In half of a process it always stops and reports: (Status 7) installation aborted.
Can anyone help?
ldinh said:
Thank you for your "help".
[Solution:]
Download ROM Manager from stock Browser (warez),
install ROM Manager,
flash ClockWorkMod recovery in ROM Manager,
boot into CWM recovery,
wipe,
flash CM & gapps,
reboot.
Click to expand...
Click to collapse

Even i have similar problem
Hi..even i have similar problem.
Copied cm7 and gapps *zip file onto the memory card and then entered the bootmenu(0.8.6) via android 2ndinit and wiped the data/cache and when i selected the zip files the phone is rebooting into the bootmenu and even after selecting the bootmenu to 2ndinit the same problem persists..can anybody help me..dont know what to do

plz that's really important to me! i flashed gapps and i lost google apps -> i can't install any apps from market!!

Thank you for your "help".
[Solution:]
Download ROM Manager from stock Browser (warez),
install ROM Manager,
flash ClockWorkMod recovery in ROM Manager,
boot into CWM recovery,
wipe,
flash CM & gapps,
reboot.

RE
I have the same problem. Titanium Backup says I'm rooted and I'm just fine but when I hit fix permissions in rom manager I get this warning "error running privileged" commands.. And when I try to flash CWM I get an unexpected error or something :S .. What the heck?

[Q] How To Flash Rom KA01_Xperia_SSpeed_testv6 On Sony Xperia Sola

I Am a Noob And It would be nice if sumone helped me flash the rom on my xperia sola via fastboot as there are on recoveries released yet

I Am a Junior Member therfore cant directly post on the Thread Plezz Help Me
I have Rooted The Device Using Doom Kernel Wht To Do Next ??
when i flash the zip i get the error of no android.txt and one more error

Open the phone in fastboot mode and tpye " fastboot flash system xperiasspeed.img"
the rom you downloaded must unzip to get the img file in flashing the phone in fastboot mode
Sent from my MT27i using XDA

Thankxx man Really Appreciate it

Remember to do a factory reset after you have installed the rom
Sent from my MT27i using XDA

To flash custom ROM's you must do this steps:
1. Flash the same firmware version which is your custom ROM is based on
2. Install DoomKernel
3. In some cases installation of prerooted stock firmwares is needed
4. Connect your device to the PC, rename ROM's .zip file into "update.zip", upload update.zip file into your SD card, reboot in recovery mode (eg volume up during DoomKernel bootlogo for SXS)
5. Backup, wipe data, wipe dalvik, factory reset
6. Install from SD card - update.zip
That's it

No Recovery For my Device yet But Got the Rom Via FastBoot

Sleep of Death Issue in Custom Roms

I'm not sure why, but after I installed many custom roms like CM 12.1,Ressurection Remix, Mokee Release etc, after that for the short period of using the device i have the "sleep of death" problem where I turn off my screen and when I turn it back on the screen doesn't turn on. Anyone know how to fix???
:crying:

It seems to be a dirty flash, try a clean install by flashing MIUI 6.6.10 and from there, follow the custom rom install instructions

I am facing the same problem. I have used CM12.1 and Mokee51.1 . My phone automatically shuts down when it is in sleep mode. Interestingly, it only happens when I am on LTE connection. I use a Reliance-Jio 4G SIM to access 4G data in India. As soon as i disable the LTE SIM, the problem disappears.
For background, I did a clean install by wiping everything ( Delvik, cache, internal memory). So, it is not a dirty installation.

Try flashing via fastboot

How to flash a .zip ROM via fastboot? I use a custom recovery like TWRP to flash a custom zip ROM. As far as I know, we can flash .img files using fastboot!

Hackerpunk1 said:
Try flashing via fastboot
Click to expand...
Click to collapse
I already done in clean install wipe every thing including internal storage. but no hope still SOD is shows.
To flash Custom Rom File using FastBoot Commands could you please provide the step-by-step procedure for that.
also after installing .zip file using fastboot is my recovery and fastboot will overwrite???
if anything happens wrong , then can i boot into fastboot section again?? for flash stock rom using Mi Flash??
Thanks,
Sabu John

Download fastboot zip.
Make sure fastboot drivers are installed.
Extract zip
Reboot phone to fastboot
Run "flash_all.bat" as administrator and wait.
---------- Post added at 04:13 AM ---------- Previous post was at 04:12 AM ----------
Fastboot will be accessible in case of failure, as fastboot is stored on a separate partition

Solution For SOD...
I got a solution for SOD, Working fine more than 2 days, without SOD.
Solution:
Works successfully in ResurrectionRemix-M-v5.6.4-20160225-ferrari
1.Flash Stock Rom v5.6.11
2.Root & Install Custom recovery (me using TWRP 2.8.7.0)
3. Wipe Every thing Cache,Dalvik Cache & System Including Internal storage
4. Install ResurrectionRemix-M-v5.6.4-20160225-ferrari
5. Install Recommended Gapps By Resurrection (Banks_Gapps)
6. Flash Super SU v2.65
7.Reboot
8.Enjoy

sabujkvkm said:
I got a solution for SOD, Working fine more than 2 days, without SOD.
Solution:
Works successfully in ResurrectionRemix-M-v5.6.4-20160225-ferrari
1.Flash Stock Rom v5.6.11
2.Root & Install Custom recovery (me using TWRP 2.8.7.0)
3. Wipe Every thing Cache,Dalvik Cache & System Including Internal storage
4. Install ResurrectionRemix-M-v5.6.4-20160225-ferrari
5. Install Recommended Gapps By Resurrection (Banks_Gapps)
6. Flash Super SU v2.65
7.Reboot
8.Enjoy
Click to expand...
Click to collapse
also the problem is with the radio i think when i switch to LTE (4g) , phone went to SOD. Otherwise in 3g/2g no problem works fine almost every custom Rom.

Leeco le2 x526 stock 5.8.19s

Those who are looking for stock 19s ROM, the g drive link is here
https://drive.google.com/uc?id=0BwU--kMdOmZiREUxUXR2eTgwX2s&export=download
How to flash?
Put the file downloaded in root directory
Boot into fastboot mode
Flash stock recovery
Now boot into TWRP recovery using following command
fastboot boot TWRP.img
Wipe Cache, dalvik cache and system.
Reboot to recovery
Now you will be in stock recovery
Update from here.
First boot might take time.

Is it possible to flash this with twrp?
Sent from my X520 using Tapatalk

lak2004mi said:
Is it possible to flash this with twrp?
Sent from my X520 using Tapatalk
Click to expand...
Click to collapse
No only via stock recovery

djdeve said:
Those who are looking for stock 19s ROM, the g drive link is here
https://drive.google.com/uc?id=0BwU--kMdOmZiREUxUXR2eTgwX2s&export=download
How to flash?
Put the file downloaded in root directory
Boot into fastboot mode
Flash stock recovery
Now boot into TWRP recovery using following command
fastboot boot TWRP.img
Wipe Cache, dalvik cache and system.
Reboot to recovery
Now you will be in stock recovery
Update from here.
First boot might take time.
Click to expand...
Click to collapse
if i flash stock recovery thn if i try to boot into recovery thn phone will open in stock recovery only thn hw cn i flash?

cjcool_123 said:
if i flash stock recovery thn if i try to boot into recovery thn phone will open in stock recovery only thn hw cn i flash?
Click to expand...
Click to collapse
True..
Use Chinese twrp and flash .. Works for me and many others .. Ensure to flash no verity zip post flashing
Or do changes in updater script and repack the zip

cjcool_123 said:
if i flash stock recovery thn if i try to boot into recovery thn phone will open in stock recovery only thn hw cn i flash?
Click to expand...
Click to collapse
After flashing stock recovery don't reboot you phone in stock recovery, bcoz you can't wipe system in stock recovery to do so ,
Reboot your phone into fastboot mode by pressing vol down and power button and connect your phone to PC and from CMD prompt run the following command
Fastboot boot twrp.img

Actually my phone was bootlooped when i tried installing twrp img of chinese version and im unable to flash ROM. Before this i used latest twrp and flashed RR and lineage OS. Volte worked fine in both the roms and in stock rom too. After this happened i installed AIO tool kit and flashed chinese twrp again. Then done flashing with lineage OS there the volte is broken. I thought it would be some software error and i tried flashing RR and found the same broken volte! Can anyone help me out in enabling volte in my le eco le2 (s2) x526.

Bootloader and Modem S2
Try flashing 19s bootloader and modem from here
https://host.llamasweet.tech/codeworkx/lineage/s2/
Thankx @codeworkx for this.

one more link for stock 19s rom
https://drive.google.com/file/d/1BgXejpbVug4KR5Mc6-eFWom6gVR96UhK/view?usp=drivesdk

custom to stock rom
if we are in custom rom and we have to go back for stock rom with stock recovery will it work by just copying the zip file into the phone and rename into update.zip
And then clicking on update will it work Guys ??

error while installing This package is for "le_s2_ww" devices;this is a "s2'.

bootloop
I tried to install the stock ROM provided by 2 ways :-
1) booting into previous version of twrp using fastboot commands and then the regular install after wiping required files.
2) Renaming it to update.zip and placing it into sdcard then via stock recovery.
it gets installed every time without any error but gets into boot loop with both steps.
Is there any way to get completely stock again ?

akakumar said:
I tried to install the stock ROM provided by 2 ways :-
1) booting into previous version of twrp using fastboot commands and then the regular install after wiping required files.
2) Renaming it to update.zip and placing it into sdcard then via stock recovery.
it gets installed every time without any error but gets into boot loop with both steps.
Is there any way to get completely stock again ?
Click to expand...
Click to collapse
Flash twrp via following toolkit .beacause only this recovery works to flash stock roms
https://forum.xda-developers.com/devdb/project/?id=16391#downloads
Open twrp do factory reset and wipe data , cache , dalvik cache . Dont wipe system . Then flash the rom . Dont flash magisk or any root app . Reboot . You got a notification from twrp that replace stock recovery . Dont replace recovery . Once rom boot setup everything .now bootloader is locked and twrp replaced via stock recovery .

Deepjashan said:
Flash twrp via following toolkit .beacause only this recovery works to flash stock roms
https://forum.xda-developers.com/devdb/project/?id=16391#downloads
Open twrp do factory reset and wipe data , cache , dalvik cache . Dont wipe system . Then flash the rom . Dont flash magisk or any root app . Reboot . You got a notification from twrp that replace stock recovery . Dont replace recovery . Once rom boot setup everything .now bootloader is locked and twrp replaced via stock recovery .
Click to expand...
Click to collapse
Hard Luck !!
its been more than half an hour and still at the same boot loop. the installation was successful as well , screenshot attached below.
PS: Ignore the cracked screen.

akakumar said:
Hard Luck !!
its been more than half an hour and still at the same boot loop. the installation was successful as well , screenshot attached below.
PS: Ignore the cracked screen.
Click to expand...
Click to collapse
I use this mathod everytime when i need stock rom. It works for me

my phone caps my speed to 4 Mbps after few minutes. It's not a isp or router based problem.
Actually I faced this problem after I flashed back to Eui 19s from 21s.

akakumar said:
I tried to install the stock ROM provided by 2 ways :-
1) booting into previous version of twrp using fastboot commands and then the regular install after wiping required files.
2) Renaming it to update.zip and placing it into sdcard then via stock recovery.
it gets installed every time without any error but gets into boot loop with both steps.
Is there any way to get completely stock again ?
Click to expand...
Click to collapse
Deepjashan said:
Flash twrp via following toolkit .beacause only this recovery works to flash stock roms
https://forum.xda-developers.com/devdb/project/?id=16391#downloads
Open twrp do factory reset and wipe data , cache , dalvik cache . Dont wipe system . Then flash the rom . Dont flash magisk or any root app . Reboot . You got a notification from twrp that replace stock recovery . Dont replace recovery . Once rom boot setup everything .now bootloader is locked and twrp replaced via stock recovery .
Click to expand...
Click to collapse
Alright I found a way ...I read it in some other discussion on le2 .
The step by step procedure to get stock back is listed :-
1) As usual reboot to recovery
2) wipe cache, dalvik, system and data
3)install the stock ROM
Now when you reboot you will get stuck into boot loop at the leeco logo.... wait for 5 mins and test your luck if it works otherwise follow next
4) go back to recovery by pressing vol up and power button.
5) install Andromodx kernel
Reboot and voila you have it running.
Also you can flash the stock recovery and lock OEM by fastboot commands
The only issues I have right now are two
1) the display scale is set to zoom and even if I set it to standard it reboots but doesn't change. I scaled down pixel density by adb commands but still its weird at some places
2) it crashes a lot ... sometimes when I press home or multitasking button it just goes black and EUI reboots. I also did a factory reset but no use.
If anyone can help me in that ....:laugh:

flash
djdeve said:
No only via stock recovery
Click to expand...
Click to collapse
give complted process for flash stock rom to letv le 2 x526

Error while flashing
Error while installing This package is for "le_s2_ww" devices;this is a "s2'.
Can you do something about it ?

akakumar said:
Hard Luck !!
its been more than half an hour and still at the same boot loop. the installation was successful as well , screenshot attached below.
PS: Ignore the cracked screen.
Click to expand...
Click to collapse
Just figured this out with the help of another post on a separate thread.
It seems that the latest twrp for x526 (v 3.2.1.0) has a bug such that when you format the data partition - it writes a wrong partition size.
This causes the boot loop with the stock ROM (other custom ROMs seems to be happy living with the error).
An associated side effect of the wrong partition size is that you wont be able to encrypt your phone on the custom ROM (the encryption process simply causes the phone to reboot without doing anything).
To resolve this, downgrade twrp to v 3.0.2. Then format cache/system/data.
Then mount the phone to your PC (enable MTP) and copy the stock ROM of your choice.
You need to update the "updater-script" and comment out the version check - and then you can install the stock ROM using twrp.
This worked for me.
Hope it works for you as well.
PS: Once you install the stock ROM, the data partition gets encrypted and first boot takes a lot of time.
Be patient and also know that twrp will no longer be able to decrypt your data partition (I think either twrp is broken OR the stock ROM uses some other default password to encrypt the data partition and hence decryption fails. I have tried using my screen lock PIN and it doesn't work and "default_password" does not work either.
All the best.
---------- Post added at 06:56 AM ---------- Previous post was at 06:52 AM ----------
satyamsahu366 said:
Error while installing This package is for "le_s2_ww" devices;this is a "s2'.
Can you do something about it ?
Click to expand...
Click to collapse
Open the update.zip file on your PC and navigate to META-INF/com/google/android.
You will find a file by the name updater-script.
Use your favourite text editor to open this file and then find the following line:
get_device_compatible("le_s2_ww") == "OK" || abort("This package is for "le_s2_ww" devices; this is a "" + getprop("ro.product.device") + "".");
Insert a # at the beginning of the line to get the installer to ignore the version mismatch and you should be good to go.
It should now look like this:
#get_device_compatible("le_s2_ww") == "OK" || abort("This package is for "le_s2_ww" devices; this is a "" + getprop("ro.product.device") + "".");
Now save this file and update the zip file / create a zip file again and then proceed with the installation as usual.

recovery broken after format system and reboot - how to unbrick?

It's an old device. I got it for free since it was just laying around in friend's home. Worked OK after factory reset with stock ROM. Wanted to upgrade Android.
Previously successfully flashed TWRP from andi34.github.io/recoveries_tab2.html for Samsung Galaxy Tab 2 GT-P3100 using heimdall on Linux. Could start the TWRP recovery. Then I followed FAQ andi34.github.io/faq.html
backup all important files (e.g. contacts) and store them on your MicroSD-Card or on your PC/Laptop
copy the rom and gapps you like to install to your MicroSD-Card (make sure Gapps match the Android version of the Rom!)
boot into your custom recovery
make a backup of your current running rom and store it on your MicroSD-Card or on your PC/Laptop (some of the following are named slight different depending on the recovery you use)
wipe cache
wipe dalvic cache
wipe/format system
wipe/format data
reboot your recovery once!
Click to expand...
Click to collapse
After reboot, I could no longer start recovery.
Perhaps I should not have formatted system?
Perhaps I should not have rebooted before flashing the ROM zip?
I can still enter download (ODIN) mode. Re-flashed the TWRP recovery. Rebooted. Still cannot enter TWRP. But can still enter download mode.
What do you recommend now?
Can I flash LinageOS ROM zip from andi34.github.io/roms_tab2_lineage.html using heimdall? But heimdall does not really support zip files? It's harder than that? Any guide for that?
Or do I have to re-flash the stock ROM? Can I flash the stock ROM using heimdall?

Get the stock rom for the device then use ODIN to flash the stock rom back, the stock rom should fix it as it also flashes the stock recovery back.

Did you reboot System instead of Recovery? What TWRP version was this? I also thought of scenarios like this.

Can you still boot to recovery (twrp)